ORA-27063: skgfospo: number of bytes read or written is incorrect
Hi allOne of my prod db received the Oracle error "ORA-27063: skgfospo: number of bytes read or written is incorrect.
How to investigate this. DB works fine now.
Oracle version:
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64 bit Production
PL/SQL Release 9.2.0.7.0 - Production
CORE 9.2.0.7.0 Production
AMT for Solaris: release 9.2.0.7.0 - Production
NLSRTL Version 9.2.0.7.0 - Production
OPERATING SYSTEM:
XXXXXXX of SunOS 5.8 Generic_117350-33 sun4u sparc SUNW, Sun-Fire-V490
Thanks in advance.
Gowin_dba,
You can check the file alert.log for awhile and if you do not see that the error does not happen and if you see the archivelogs getting generated that overcome you this problem.
Please let me know if you need more assistance.
Hope that helps.
Ogan
Tags: Database
Similar Questions
-
Hi all
Recently, we encountered a non usual problem with restarting the database because of the ORA-27063
number of bytes read or written is
incorrect #IBM AIX RISC System/6000 error: 28: no space is available on the device.
Database version: 11.2.0.4
Type of system: SAP database
Computer type: AIX
When the investigation we found the full systems 100% file where resided temporary files. So to solve it, we simply added tempfiles on other file systems.
My question is why the db restarted. As far as I know the TEMP tablespace will throw an error (unable to extend TEMP of 128 segment in tablespace TEMP) every time that
There is no free space.
Secondly, to avoid the above, that we began to find the TEMP files from file systems and if found 90% and above then began adding space on all the production servers to avoid
reoccurance of this issue. Is - this recommended...?
Thank you
Hello
It can be consider as an alternative (using a cron task) or if you watch in em12c could control, so you can host some metrics to check temp space.
Now, one last thing to consider, it is not advisable to go to increase temp (to be honest, we need optimize queries, why won't they are eating take so much space)
Third step, you can put a profile (limit) so much space is used, then kill the session so that they eat no place (so that db will not get crashed at least... only session will be started - we can very well with that, instead of hammering db)
-Pavan Kumar N
-
ASM: determine the total number of bytes read/written &; Ops / s
Hello
My environment:
- Oracle 11.2.0.3 EE
- SuSE Enterprise Linux 11 SP1, 64-bit
- ASM starts on RAW LUNS (2 per group) Hitachi disk storage
- DB-server: HP DL380 G7
I want to disc ASM ssd drive switch, direct attach to via HP DS2700 attachment:
- DiskGroup + DATA
5x400GB Enterprise SSD, RAID 5, 1.6 TB of raw capacity
used to redo, data files - DiskGroup + ARCH
4x400GB Enterprise SSD, RAID0 + 1, capacity of 800GBraw
used to redo, Archives, Flash Recovery Area
As I understand until this SSD technology, SSD have a livetime, indicating that there is a guaranteed amount of data that can be read/written on this subject. My goal is to design a system that has no point of two ssd failure in the same RAID group.
- How can I determine the total number of bytes read/written in ASM starts so far?
My idea was to dermine ASM block size (select block_size from v$ asm_diskgroup) and then look at total reads and writes columns via iostat command in asmcmd. I guess that these values are since the last start of the DSO. - Is it possible to determine the IOPS / sec per diskgroup?
Thank you
SCSICasimir wrote:
Do the calculation for 1. gives me an odd result:
ASMCMD disk group management controls said that the default view is the amount of bytes and that the -io parameter must be used to display the number of e/s instead.
-
VISA read where you don't know the number of bytes?
I work with a VISA resource via the USB port that reads in the results of printf (% lu % TSP %d)) of a microcontroller. These results are as ASCII numbers, their length in bytes is unknown. Numbers * should * be not more than 3 digits, but I can't know that for sure. Reading VISA won't let me the number of bytes unwired, so should I join just a high constant let him? Or is there a better way?
1. do you have the microcontroller send a character to end of line (0xA on the ASCII table) at the end of the printf.
2. turn the stop of the session VISA character and the value it is 0xA. You may need to perform this task via the VISA property node.
3. playback VISA to read more bytes than you tell never expect to get. VISA playback will stop reading when it detects the termination character (End Of Line).
-
County to return read VISA does not match number of bytes
I encounter an error with a VISA reading. I ask 8 bytes (in number of bytes), but get only 7 return (return number), which causes errors in my code downstream. Curiously, the VISA Read block does not return an error. Any ideas on how to debug this?
Data sheet:
LabVIEW RT 8.2
VISA 4.3
Series OR 3.3.0
PXI-8431/4
Parameters: 1843200 Baud, 8N1.
Is VISA reading set to put an end to the reception of a termination character? I think that it does not have the stop in the output string character, which could make your short back counter.
Lynn
-
SQL * Loader - rejected records - error on table ORA-01722: invalid number
Get the following errors:
Please tell me where I'm wrong?
The log file and extracts the data file with the control file is attached.
Also guide me please how I can download 4900 files at once?
-------------------------------------
SQL * Loader: release 11.1.0.7.0 - Production on Fri 14 Oct 03:06:06 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Control file: sample.ctl
Data file: Cities.csv
Bad leadership: Cities.bad
Discard File: none is specified
(Allow all releases)
Number of loading: ALL
Number of jump: 0
Authorized errors: 50
Link table: 64 lines, maximum of 256000 bytes
Continuation of the debate: none is specified
Path used: classics
Table CITY, loaded from every logical record.
Insert the option in effect for this table: INSERT
Column Position Len term Encl. Datatype name
------------------------------ ---------- ----- ---- ---- ---------------------
FIRST ID *, CHARACTER
35. ACCORDING TO NAME, ' CHARACTER
COUNTRYCODE 3, ' CHARACTER
THE NEXT POPULATION * CHARACTER WHT
Sheet 1: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 2: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 3: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Folder 4: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 5: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 6: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 7: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 8: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
File 9: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Case 10: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Factsheet 11: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 12: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
File 13: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Fact sheet 14: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Fact sheet 15: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 16: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
File 17: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 18: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
File 19: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 20: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 21: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Account 22: rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 23: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record number of 24: rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 25: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Fact sheet 26: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Fact sheet 27: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 28: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 29: rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 30: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record of 31: rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
• Statement 32: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 33: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Page 34: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 35: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 36: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 37: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 38: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 39: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 40: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 41: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Page 42: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 43: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Sheet 44: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 45: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
• Statement 46: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 47: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 48: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 49: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Page 50: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
Record 51: Rejected - error on the table CITY, POPULATION column.
ORA-01722: invalid number
NUMBER of MAXIMUM ERRORS EXCEEDED - above the statistics reflect partial performance.
CITY table:
0 rows successfully loaded.
51 lines not filled due to data errors.
0 rows not loading because all WHEN clauses were failed.
0 rows not populated because all fields are null.
The space allocated to bind table: 35840 bytes (64 lines)
Bytes of read buffer: 1048576
Total logical records ignored: 0
Total logical records read: 64
Total rejected logical records: 51
Total logical records ignored: 0
Run started on Fri 14 Oct 03:06:06 2011
Run finished Fri Oct 14 03:06:12 2011
Time was: 00:00:06.18
Time processor was: 00:00:00.03
----------------------------------------------------------------------
my control file (sample.ctl):
Load data infile 'Cities.csv '.
in the town of table
fields completed by «,»
(external id integer,
char (35) name box by ' ', '
CountryCode tank (3) box by ' ', '
external population integer terminated by '\n '.
)
my data (Cities.csv) file (it contains 4900 documents, but I show here just 4 records for ease)
3830, "Virginia Beach", "USA", 425257
3831, 'Atlanta', 'USA', 416474
3832, "Sacramento", "USA", 407018
3833, 'Oakland', 'USA', 399484
Thanks in advance!Watch when I have a little change your database as follows
1,'Kabul','AFG',1780000 2,'Qandahar','AFG','237500' 3,'Herat','AFG','186800'
I got the same error (last 2 rows rejected for the same number invalid error)
mhouri > select * from cities; ID NAME COU POPULATION ---------- ----------------------------------- --- ---------- 1 Kabul AFG 1780000 SQL*Loader: Release 10.2.0.3.0 - Production on Fri Oct 14 10:38:06 2011 Copyright (c) 1982, 2005, Oracle. All rights reserved. Control File: cities.ctl Data File: cities.dat Bad File: cities.bad Discard File: none specified (Allow all discards) Number to load: ALL Number to skip: 0 Errors allowed: 50 Bind array: 64 rows, maximum of 256000 bytes Continuation: none specified Path used: Conventional Table CITIES, loaded from every logical record. Insert option in effect for this table: INSERT Column Name Position Len Term Encl Datatype ------------------------------ ---------- ----- ---- ---- --------------------- ID FIRST * , CHARACTER NAME NEXT 35 , ' CHARACTER COUNTRYCODE NEXT 3 , ' CHARACTER POPULATION NEXT * WHT CHARACTER Record 4: Rejected - Error on table CITIES, column ID. Column not found before end of logical record (use TRAILING NULLCOLS) Record 2: Rejected - Error on table CITIES, column POPULATION. ORA-01722: invalid number Record 3: Rejected - Error on table CITIES, column POPULATION. ORA-01722: invalid number Table CITIES: 1 Row successfully loaded. 3 Rows not loaded due to data errors. 0 Rows not loaded because all WHEN clauses were failed. 0 Rows not loaded because all fields were null. Space allocated for bind array: 35840 bytes(64 rows) Read buffer bytes: 1048576 Total logical records skipped: 0 Total logical records read: 4 Total logical records rejected: 3 Total logical records discarded: 0 Run began on Fri Oct 14 10:38:06 2011 Run ended on Fri Oct 14 10:38:06 2011 Elapsed time was: 00:00:00.23 CPU time was: 00:00:00.09
Value of the population within the data file must be a number
Best regards
Mohamed Houri
-
ORA-01722: invalid number in SQL Loader
Hi all
CREATE TABLE SAMPL_TABLE
(
ITEM_CATEGORY VARCHAR2 (30 BYTES),
ITEM_NO VARCHAR2 (240 BYTES),
ITEM_DESCRIPTION VARCHAR2 (240 BYTES),
CLIENT_NAME VARCHAR2 (240 BYTES),
CUSTOMER_NO VARCHAR2 (240 BYTES),
VALID_AMOUNT_MONTH1 NUMBER,
VALID_UNITS_MONTH1 NUMBER,
VALID_BUDGET_AMOUNT_MONTH1 NUMBER,
VALID_BUDGET_UNITS_MONTH1 NUMBER,
ATTRIBUTE1 VARCHAR2 (240 BYTES),
ATTRIBUT2 VARCHAR2 (240 BYTES),
NUMBER OF VALID_RATE
);
Control file
Options (Errors = 10000, Skip = 3)
DOWNLOAD THE DATA
INFILE ' / home/appltest/Sheet1.csv'
BADFILE "sample.bad."
DISCARDFILE 'sample.dsc '.
REPLACE
IN THE TABLE sampl_table
fields completed by «,»
surrounded of possibly "" "
trailing nullcols
(
client_name TANK NULLIF client_name = BLANKS "RTRIM(:customer_name)."
customer_no NULLIF CHAR customer_no = BLANKS "RTRIM(:customer_no)."
item_no NULLIF TANK item_no = BLANKS "RTRIM(:item_no)."
valid_amount_month1 "to_number (: valid_amount_month1, '999,999,999.99')."
valid_units_month1 "to_number (substr (: valid_units_month1, instr(:valid_units_month1,'$') + 1), '999,999,999.99')."
valid_budget_units_month1 "to_number (: valid_budget_units_month1, '999,999,999.99')."
valid_budget_amount_month1 "to_number (trim (substr (: valid_budget_amount_month1, instr(:valid_budget_amount_month1,'$') + 1)), '999,999,999.99')."
valid_rate NULLIF CHAR valid_rate = BLANKS 'RTRIM(:valid_rate) '.
)
Sheet1.csv
Name of the cust Cust #. Article no. Item Desc Category Amount – month 1 Units - month 1 Act early Act early Budget - months 1 Budget - unit - months 1 Rate Name of the cust Cust #. Article no. Item Desc Category Amount – month 1 Units - month 1 Act early Act early Budget - months 1 Budget - unit - months 1 Rate Name of the cust Cust #. Article no. Item Desc Category Amount – month 1 Units - month 1 Act early Act early Budget - months 1 Budget - unit - months 1 Rate REYNU 1001 ABC001 ABC Renyu ABC 82 61 1 REYNU1 1028 ABC123 ABCRenyu123 ABC 295 1469 1 REYNU2 1028 ABC344 ABC Renyu 344 ABC 2270 6335 1 Get error below
Sheet 1: Rejected - error on the table SAMPL_TABLE, column VALID_RATE.
ORA-01722: invalid number
Sheet 2: Rejected - error on the table SAMPL_TABLE, column VALID_RATE.
ORA-01722: invalid number
Sheet 3: Rejected - error on the table SAMPL_TABLE, column VALID_RATE.
ORA-01722: invalid number
Sheet 1: Rejected - error on the table SAMPL_TABLE, column VALID_AMOUNT_MONTH1 .
ORA-01722: invalid number
Sheet 2: Rejected - error on the table SAMPL_TABLE, column VALID_AMOUNT_MONTH1 .
ORA-01722: invalid number
Sheet 3: Rejected - error on the table SAMPL_TABLE column VALID_AMOUNT_MONTH1
ORA-01722: invalid number
Can you help me please?
Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
Hello
No sign of setting shaped or ' $' is seen in the data, which is the reason why I guess you used the conversions in the * ctl file.
What is the problem with this symbol $ in the code?
No problem with the ' $'-what I mean is that it is not necessary.
Looking for him "$" field and exclude it from your text/number (SUBSTR) and if there is no "$" in your file, this additional training is not mandatory - why clutter up your code with unnecessary functions?
Regarding the error you get, it is related to the format mask, you provide:
Message #20:
Select to_number (substr (146, instr(146,'$') + 1), '999,999,999.99') of double
o/p: 146
Select to_number (substr (1469, instr(1469,'$') + 1), '999,999,999.99') of double
Error: ORA-01722: invalid number
1. you must use "146" (text) and no 146 (number).
2. ' 146' works because it "fits" the format mask you supplied: 999 999,999. 99. " but '1469' does not like the format mask expects one ',' as the delimiter of thousands, that is, "1 469'."
Select to_number (substr (1, 469', instr('1,469','$') + 1), '999,999,999.99') twice;
Similarly, in the #22 Post:
to_number (substr (' 752,3308', instr ('752.3308', ' $') + 1), 999, 999 999,99') of double
4 decimals are consistent with the format DP 2 mask.
Simply remove all masks of format.
-
ORA-19599: block number 45289 is corrupt in the backup piece
OS: RHEL 5.7 64bits
Database: 11.1.0.7
Hi all
I have problems to restore RMAN backup on test computer. The restore command is sick of following error message:
ORA-19599: block number 45289 is corrupted in the backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927509_1 item
I already checked the piece back on prod and it seems OK:
RMAN > validate backupset 3840;
From post on 27 February 15
using channel ORA_DISK_1
using the ORA_DISK_2 channel
channel ORA_DISK_1: starting from the validation of the data file backup set
channel ORA_DISK_1: reading of the backup/oradata/ERP/RMAN_BACKUP/RMAN_ERP_20150227_15927509_1 element
channel ORA_DISK_1: piece handle = / oradata/ERP/RMAN_BACKUP/RMAN_ERP_20150227_15927509_1 tag = TAG20150227T040007
channel ORA_DISK_1: restored the backup part 1
channel ORA_DISK_1: validation complete, duration: 00:02:45
Finished post on 27 February 15
Restore validate command also fails on the test machine:
RMAN > restore database validation verification logic;
From restoration to 27 February 15
using the control file of the target instead of recovery catalog database
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 779 type device = DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: SID = 778 type device = DISK
channel ORA_DISK_1: sweeping datafile copy /oracle/DEV/db/apps_st/data/a_ref03.dbf
channel ORA_DISK_2: from the validation of the data file backup set
channel ORA_DISK_2: reading of the backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927510_1 element
channel ORA_DISK_1: sweeping datafile copy /oracle/DEV/db/apps_st/data/a_txn_data05.dbf
channel ORA_DISK_2: ORA-19870: error when restoring backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927510_1 piece
ORA-19599: block number 233296 is corrupted in the backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927510_1 item
channel ORA_DISK_2: scanning datafile copy /oracle/DEV/db/apps_st/data/a_int01.dbf
channel ORA_DISK_1: starting from the validation of the data file backup set
channel ORA_DISK_1: reading of the backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927509_1 element
channel ORA_DISK_1: ORA-19870: error when restoring backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927509_1 piece
ORA-19599: block number 45289 is corrupted in the backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927509_1 item
switch to the previous backup
My confusion is why validate backupset succeeds the prod and the same backupset presents corruption block during test.
Kind regards
Vinod
Maybe the backuppiece has been altered in the transfer to the DEV machine? Run a checksum on the backuppiece on both machines and compare.
Hemant K Collette
-
Error: ORA-01722: invalid number
Hello
Can some please tell me what I'm doing wrong when I try to make a difference?
Since the format is the same I use this query
Select b1 - b2 of TMP_1;Error: ORA-01722: invalid number
objective:--create table CREATE TABLE TMP_1 ( B1 VARCHAR2(8 BYTE), B2 VARCHAR2(8 BYTE) ) / --insert INSERT INTO TMP_1 (B1, B2) VALUES ('00:02:54', '00:02:10'); INSERT INTO TMP_1 (B1, B2) VALUES ('00:05:47', '00:03:56'); INSERT INTO TMP_1 (B1, B2) VALUES ('00:12:49', '00:02:37'); INSERT INTO TMP_1 (B1, B2) VALUES ('00:49:33', '00:02:09'); INSERT INTO TMP_1 (B1, B2) VALUES ('00:06:34', '00:02:39'); INSERT INTO TMP_1 (B1, B2) VALUES ('00:02:45', '00:01:41'); INSERT INTO TMP_1 (B1, B2) VALUES ('00:01:22', '00:00:22'); COMMIT;
Need to get the difference in the same format as thecolumns example: 00:02:54
Please provide examples of data, it is very useful. Here's one way:
SQL> select b1, b2, 2 b1 - (to_date(to_char(sysdate, 'dd-mon-yyyy')||' '||b2,'dd-mon-yyyy hh24:mi:ss') - trunc(sysdate)) b3 3 from tmp_1; B1 B2 B3 -------------------- -------- -------------------- 03-dec-2012 20:13:33 00:02:10 03-dec-2012 20:11:23 03-dec-2012 18:24:24 00:03:56 03-dec-2012 18:20:28 03-dec-2012 21:48:33 00:02:37 03-dec-2012 21:45:56 03-dec-2012 15:50:09 00:02:09 03-dec-2012 15:48:00 03-dec-2012 14:06:24 00:02:39 03-dec-2012 14:03:45 03-dec-2012 21:47:15 00:01:41 03-dec-2012 21:45:34
John
-
control of chain to limit the number of bytes
Hello
Is it possible to set the limit on the length of the control of the chain in number of bytes? I have a control to the string whose length is always going to be 3 bytes and I don't want the user to enter accidentally more bytes.
What I did just now, is having an event on the channel to change value and display only the 1st 3 bytes every time that happens the value change event, but I want to know if there is no direct way to set the limit on the number of bytes on the control of the chain.
Thank you
Ritesh
This has been discussed several times in the past. For example, look here.
-
I have a database application that all the text boxes have a limit on the bytes user can write in. I think that we have a way to limit the number of bytes, that a user can enter in a text box. I have not found a property or method that can serve the purpose. One can provide some tips?
Thank you and best regards,
Wang Guangde
You can try with the chain of control updated as you type and disable it then "calue change" event when it reaches the maximum length
-
ORA-00020: maximum number of processes (150) exceeded
Hello
I'm getting ORA-00020: maximum number of processes (150) exceeded. I can not connect as sys. I killed all the oracle user processes but could not connect. Pls advice me on this.
Rgds,
AthuruMithuru.
Hello
try to connect with a - prelim
prelim sqlplus / as sysdba
-
ORA-00020: maximum number of processes exceeded
All respected DBAs,
Today I faced an issue. I found below statement alertlog file and when I tried to connect to the base of this error came on the command line.
"ORA-00020: maximum number of processes exceeded 150.
Then I restarted my Oracle Service, connected to the database and questioned
select * from v$ resource_limit and found this result.
Process
CURRENT_UTILIZATION = 52
MAX_UTILIZATION = 61
INITIAL_ALLOCATION = 150
LIMIT_VALUE = 150
Sessions
CURRENT_UTILIZATION = 53
MAX_UTILIZATION = 60
INITIAL_ALLOCATION = 248
LIMIT_VALUE = 248
If my process is exceeded then why MAX_UTILIZATION = 61 only? Please, help me to understand this.
This view is dynamic (it will reset on reboot) and restart you the database.
So you can only say that after the restart of the database the number of processes is already 61.
-------------
Sybrand Bakker
Senior Oracle DBA
-
error ora-00036 maximum number of levels of sql recursive (50) exceeded
I have a trigger of the declaration on the LEVELS table, I want to update COMPONENTS field when another field is changed in TIERS, in order to avoid the calculations, I used to ch line shutter COMPONENTS to complete a package, but I get this error ora-00036 maximum number of recursive sql exceeded (50)
It's my trigger:
create or replace trigger DBTRGA_UPD_TIERS
after update on tiers
I INT ;
FOR I IN (PKG_TIERS. TAB. FIRST)... (PKG_TIERS. TAB. Last) LOOP
UPDATE to levels
PUT REFERENCE_EXTERNE = "YYYY"
WHERE LEVELS = PKG_TIERS. TAB (I). I_TIERS;
END LOOP;
end DBTRGA_UPD_TIERS;
This is ma for each trigger line:
create or replace trigger DBTRGA_UPD_TIERS_E
after Update FOR CODE_TYPE_TIERS on LEVELS
for each row
V_CPT INTEGER ;
IF : NEW. CODE_TYPE_TIERS IS NOT NULL THEN
IF PKG_TIERS. TAB. LAST IS NULL THEN
PKG_TIERS. TAB(1). I_TIERS: =: NEW. BLEACHERS;
PKG_TIERS. TAB(1). CODE_TYPE_TIERS: =: NEW. CODE_TYPE_TIERS;
ELSE
V_CPT: = PKG_TIERS. TAB. LAST + 1;
END IF;
END IF;
end DBTRGA_UPD_TIERS_E;
Clearly, you have past of recursion. After updating the table of LEVELS, then a statement trigger level (after update) as the fires that updates the table LEVELS... which will cause then itself to once again fire... which will cause himself to fire once again... which will cause itself to the light again... etc etc.
If it is a business logic that should be implemented, so you don't want to include it as a trigger, you want to just have a code in a package that updates the table once.
If it were me, I would scrap two triggers in this case. Have a trigger is fired for each row updated (in SQL) which has then cross to the PL/SQL package for details of this update line, means you to act so the context switching between SQL and PL/SQL for each update line, which will affect the performance of the updates.
Explain what you're actually trying to do (business logic), with a few examples and data tables and we might be able to propose a better approach, which is not abusing triggers in this way.
-
SQL error: ORA-31038: invalid number '420,05' when extracting data from XML
Hello everyone ,
J’ai créé dietingDBMS_XMLSCHEMA. REGISTERSCHEMA (SCHEMAURL = > 'OrdenDetalle.xsd', SCHEMADOC = > ' <? xml version = "1.0" encoding = "UTF?) 8 "? >
" < xs: schema xmlns: XS =" http://www.w3.org/2001/XMLSchema ">
< xs: element name = "Monsigniore" >
< xs: complexType >
< xs: SEQUENCE >
< xs: element name = "Quantity" type = "Integer" / >
< xs: element name = "FechaCreacion" type = "xs: DateTime" / >
< xs: element name = "Version" type = "xs: String" / >
< xs: ELEMENT ref = "News" / >
< / xs: SEQUENCE >
< / xs: complexType >
< / xs: element >
< xs: element name = "News" >
< xs: complexType >
< xs: Choice >
< xs: element name = "OrdenCompra" type = "T_OrdenCompra" / >
< / xs: Choice >
< / xs: complexType >
< / xs: element >
< name XS: complexType = "T_OrdenCompra" >
< xs: SEQUENCE >
< xs: element name = "Code" type = "xs: String" / >
< xs: element name = "Number" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "CodigoEstado" type = "Integer" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "CodigoLicitacion" type = "xs: String" nillable = "true" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Description" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "CodigoTipo" type = "Integer" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Type" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "TipoMoneda" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "State" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "CodigoEstadoProveedor" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "EstadoProveedor" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: ELEMENT ref = "Fechas" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "TieneItems" type = "Integer" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "PromedioCalificacion" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "CantidadEvaluacion" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Well" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Freighters" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "TotalNeto" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "PorcentajeIva" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Impuestos" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Total" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Financing" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Country" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "TipoDespacho" type = "Integer" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "FormaPago" type = "Integer" minOccurs = "0" maxOccurs = "1" / >
< xs: ELEMENT ref = "Comprador" minOccurs = "0" maxOccurs = "1" / >
< xs: ELEMENT ref = "Proveedor" minOccurs = "0" maxOccurs = "1" / >
< xs: ELEMENT ref = "Items" minOccurs = "0" maxOccurs = "1" / >
< / xs: SEQUENCE >
< / xs: complexType >
< xs: element name = "Items" >
< xs: complexType >
< xs: SEQUENCE >
< xs: element name = "Quantity" type = "Integer" / >
< xs: element name = "News" >
< xs: complexType >
< xs: SEQUENCE >
< xs: ELEMENT ref = "Item" minOccurs = "0" maxOccurs = "unbounded" / >
< / xs: SEQUENCE >
< / xs: complexType >
< / xs: element >
< / xs: SEQUENCE >
< / xs: complexType >
< / xs: element >
< name XS: complexType = "OrdenCompraBusqueda" >
< xs:complexContent >
< xs:extension base = "T_OrdenCompra" >
< / xs:extension >
< / xs:complexContent >
< / xs: complexType >
< xs: element name = "Item" >
< xs: complexType >
< xs: SEQUENCE >
< xs: element name = "Correlativo" type = "Integer" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "CodigoCategoria" type = "Integer" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Category" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "CodigoProducto" type = "Integer" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Product" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "EspecificacionComprador" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "EspecificacionProveedor" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Quantity" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Moneda" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
"< xs: element name ="PrecioNeto"type ="XS: Decimal"minOccurs ="0"maxOccurs ="1"/ >
< xs: element name = "TotalCargos" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "TotalDescuentos" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "TotalImpuestos" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Total" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >
< / xs: SEQUENCE >
< / xs: complexType >
< / xs: element >
< xs: element name = "Fechas" >
< xs: complexType >
< xs: SEQUENCE >
< xs: element name = "FechaCreacion" type = "xs: DateTime" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "FechaEnvio" type = xs: DateTime "" nillable = "true" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "FechaAceptacion" type = xs: DateTime "" nillable = "true" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "FechaCancelacion" type = xs: DateTime "" nillable = "true" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "FechaUltimaModificacion" type = xs: DateTime "" nillable = "true" minOccurs = "0" maxOccurs = "1" / >
< / xs: SEQUENCE >
< / xs: complexType >
< / xs: element >
< xs: element name = "Comprador" >
< xs: complexType >
< xs: SEQUENCE >
< xs: element name = "CodigoOrganismo" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "NombreOrganismo" type = "xs: String" nillable = "true" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "RutUnidad" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "CodigoUnidad" type = "Integer" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "NombreUnidad" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Activity" type = "xs: String" nillable = "true" / >
< xs: element name = "DireccionUnidad" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "ComunaUnidad" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "RegionUnidad" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Country" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "NombreContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "CargoContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "FonoContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "MailContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< / xs: SEQUENCE >
< / xs: complexType >
< / xs: element >
< xs: element name = "Proveedor" >
< xs: complexType >
< xs: SEQUENCE >
< xs: element name = "Code" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Number" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Activity" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "CodigoSucursal" type = "Integer" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "NombreSucursal" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "RutSucursal" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Address" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Comuna" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Region" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "Country" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "NombreContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "CargoContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "FonoContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< xs: element name = "MailContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >
< / xs: SEQUENCE >
< / xs: complexType >
< / xs: element >
< / xs: Schema >
', LOCAL = > true, GENTYPES = > false, GENBEAN = > false, GENTABLES = > false,
FORCE = > false, OPTIONS = > DBMS_XMLSCHEMA. REGISTER_BINARYXML, OWNER = > USER);
I have a table with one xml domain.
CREATE TABLE XML_Orden_Detalle (Fecha_GET date default current_date not null,
Fecha_Ordenes number not null,
Correlativo_Ordenes number not null,
Codigo_Orden varchar2 (20) not not null primary key,
Cant_Item,
Date of InicioProceso,
Date of FinProceso,
Xmltype Orden_Detalle not null)
Orden_Detalle XMLTYPE COLUMN
STORE AS BINARY XML
XMLSCHEMA " " http://xmlns.Oracle.com/xdb/schemas/CCS_XML/OrdenDetalle.xsd "" "
ELEMENT "command";
I inserted data like that, without any Errors:" < Command containing = ' http://www.w3.org/2001/XMLSchema "" xmlns: xsi = " " http://www.w3.org/2001/XMLSchema-instance ">
< Number > 1 < / quantity >
< FechaCreacion > 2015-05-28T 12: 10:26.947000 < / FechaCreacion >
v1 < version > < / Version >
< Return >
< OrdenCompra xsi: type = "OrdenCompraBusqueda" >
3879-2661-SE14 < code > < / code >
< Number > PSP DAEM 2014. COFFEE BREAK PARA FRINGE OP21838 < / number >
< CodigoEstado > 6 < / CodigoEstado >
3902 5-on 14 < CodigoLicitacion > < / CodigoLicitacion >
< Description > PSP DAEM 2014. COFFEE BREAK PARA FRINGE OP21838 < / description >
< CodigoTipo > 8 < / CodigoTipo >
< Type > SE < / Type >
< TipoMoneda > CLP < / TipoMoneda >
Is < State > < / Estado >
< CodigoEstadoProveedor > 4 < / CodigoEstadoProveedor >
Is < EstadoProveedor > < / EstadoProveedor >
< Fechas >
< FechaCreacion > 2014-12-29T 17: 43:32.287000 < / FechaCreacion >
< FechaEnvio > 2014-12-31T 10: 32:35.480000 < / FechaEnvio >
< FechaAceptacion > 2015 - 01-01 T 21: 03:03.660000 < / FechaAceptacion >
< FechaCancelacion xsi: Nil = "true" / >
< FechaUltimaModificacion > 2014-12-29T 17: 51:00.000000 < / FechaUltimaModificacion >
< / Fechas >
< TieneItems > 1 < / TieneItems >
< PromedioCalificacion > 5 < / PromedioCalificacion >
< CantidadEvaluacion > 1 < / CantidadEvaluacion >
< Well > 0 < / well >
cargo <>0 < / cargo >
< TotalNeto > 53782 < / TotalNeto >
< PorcentajeIva > 19 < / PorcentajeIva >
< Impuestos > 10218 < / Impuestos >
< total > 64000 < / Total >
< Financing > 1140569 < / financing >
< Country > CL < / Pais >
< TipoDespacho > 12 < / TipoDespacho >
< FormaPago > 2 < / FormaPago >
< comprador >
< CodigoOrganismo > 118069 < / CodigoOrganismo >
< NombreOrganismo > Ilustre municipalidad of Bulnes < / NombreOrganismo >
< RutUnidad > 69.141.200 - 8 < / RutUnidad >
< CodigoUnidad > 4799 < / CodigoUnidad >
Daem < NombreUnidad > < / NombreUnidad >
< Actividad / >
< DireccionUnidad > VICTOR BIANCHI Nº415 < / DireccionUnidad >
Bulnes < ComunaUnidad > < / ComunaUnidad >
< RegionUnidad > Region del Biobio < / RegionUnidad >
< Country > CL < / Pais >
Antonella Brunetti < NombreContacto > < / NombreContacto >
Adquisiciones < CargoContacto > < / CargoContacto >
< FonoContacto > 56-42-2204053-2204054 < / FonoContacto >
< MailContacto > [email protected] < / MailContacto >
< / comprador >
< Proveedor >
< Code > 275020 < / code >
Luis < number > < / number >
< Activity > MANUFACTURING OF PAN, BLOCK PANADERIA Y PRODUCTOS < / activity >
< CodigoSucursal > 280820 < / CodigoSucursal >
Luis < NombreSucursal > < / NombreSucursal >
< RutSucursal > 5.940.940 - 9 < / RutSucursal >
< Address > Carlos Palacios 125 < / address >
Bulnes < Comuna > < / Comuna >
Region del Biobio < region > < / region >
< Country > CL < / Pais >
< NombreContacto > Luis Leonardo Valdés Landero < / NombreContacto >
Gerente < CargoContacto > < / CargoContacto >
< FonoContacto > (56) (42) 631498 < /FonoContacto >
< MailContacto > [email protected] < / MailContacto >
< / Proveedor >
elements <>
< Quantity > 7 < / quantity >
< Return >
< item >
< Correlativo > 1 < / Correlativo >
< CodigoCategoria > 30222700 < / CodigoCategoria >
< Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >
< CodigoProducto > 30222703 < / CodigoProducto >
< product > ALMACEN Mercancias < / product >
< EspecificacionComprador > 3 LITROS BEBIDAS < / EspecificacionComprador >
< EspecificacionProveedor / >
< Number > 10 < / quantity >
< Moneda > CLP < / Moneda >
< PrecioNeto > 1550 < / PrecioNeto >
< TotalCargos > 0 < / TotalCargos >
< TotalDescuentos > 0 < / TotalDescuentos >
< TotalImpuestos > 0 < / TotalImpuestos >
< total > 15500 < / Total >
< / point >
< item >
< Correlativo > 2 < / Correlativo >
< CodigoCategoria > 30222700 < / CodigoCategoria >
< Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >
< CodigoProducto > 30222703 < / CodigoProducto >
< product > ALMACEN Mercancias < / product >
< EspecificacionComprador > DEEMED OF 1 1/2 LITYROS < / EspecificacionComprador >
< EspecificacionProveedor / >
< Number > 10 < / quantity >
< Moneda > CLP < / Moneda >
< PrecioNeto > 1150 < / PrecioNeto >
< TotalCargos > 0 < / TotalCargos >
< TotalDescuentos > 0 < / TotalDescuentos >
< TotalImpuestos > 0 < / TotalImpuestos >
< total > 11500 < / Total >
< / point >
< item >
< Correlativo > 3 < / Correlativo >
< CodigoCategoria > 30222700 < / CodigoCategoria >
< Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >
< CodigoProducto > 30222703 < / CodigoProducto >
< product > ALMACEN Mercancias < / product >
< EspecificacionComprador > PACKAGES SERVILLETAS < / EspecificacionComprador >
< EspecificacionProveedor / >
< Number > 8 < / quantity >
< Moneda > CLP < / Moneda >
< PrecioNeto > 170 < / PrecioNeto >
< TotalCargos > 0 < / TotalCargos >
< TotalDescuentos > 0 < / TotalDescuentos >
< TotalImpuestos > 0 < / TotalImpuestos >
< total > 1360 < / Total >
< / point >
< item >
< Correlativo > 4 < / Correlativo >
< CodigoCategoria > 30222700 < / CodigoCategoria >
< Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >
< CodigoProducto > 30222703 < / CodigoProducto >
< product > ALMACEN Mercancias < / product >
< EspecificacionComprador > pounds OF AZÚCAR < / EspecificacionComprador >
< EspecificacionProveedor / >
< Number > 5 < / quantity >
< Moneda > CLP < / Moneda >
< PrecioNeto > 580 < / PrecioNeto >
< TotalCargos > 0 < / TotalCargos >
< TotalDescuentos > 0 < / TotalDescuentos >
< TotalImpuestos > 0 < / TotalImpuestos >
< total > 2900 < / Total >
< / point >
< item >
< Correlativo > 5 < / Correlativo >
< CodigoCategoria > 30222700 < / CodigoCategoria >
< Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >
< CodigoProducto > 30222703 < / CodigoProducto >
< product > ALMACEN Mercancias < / product >
< EspecificacionComprador > NESCAFE < / EspecificacionComprador >
< EspecificacionProveedor / >
< Number > 2 < / quantity >
< Moneda > CLP < / Moneda >
< PrecioNeto > 3900 < / PrecioNeto >
< TotalCargos > 0 < / TotalCargos >
< TotalDescuentos > 0 < / TotalDescuentos >
< TotalImpuestos > 0 < / TotalImpuestos >
< total > 7800 < / Total >
< / point >
< item >
< Correlativo > 6 < / Correlativo >
< CodigoCategoria > 30222700 < / CodigoCategoria >
< Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >
< CodigoProducto > 30222703 < / CodigoProducto >
< product > ALMACEN Mercancias < / product >
< EspecificacionComprador > CAJAS OF TE 20 BOWL < / EspecificacionComprador >
< EspecificacionProveedor / >
< Number > 5 < / quantity >
< Moneda > CLP < / Moneda >
< PrecioNeto > 340 < / PrecioNeto >
< TotalCargos > 0 < / TotalCargos >
< TotalDescuentos > 0 < / TotalDescuentos >
< TotalImpuestos > 0 < / TotalImpuestos >
< total > 1700 < / Total >
< / point >
< item >
< Correlativo > 7 < / Correlativo >
< CodigoCategoria > 30222700 < / CodigoCategoria >
< Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >
< CodigoProducto > 30222703 < / CodigoProducto >
< product > ALMACEN Mercancias < / product >
TRITON GALLETAS < EspecificacionComprador > < / EspecificacionComprador >
< EspecificacionProveedor / >
< Number > 31 < / quantity >
< Moneda > CLP < / Moneda >
< PrecioNeto >420,05< / PrecioNeto >
< TotalCargos > 0 < / TotalCargos >
< TotalDescuentos > 0 < / TotalDescuentos >
< TotalImpuestos > 0 < / TotalImpuestos >
< total > 13021,550000000001 < / Total >
< / point >
< / News >
< / object >
< / OrdenCompra >
< / News >
< / Monsigniore >
However when I extract data, for example:
Select *.
from xmltable (to_char (' / Monsigniore/news/OrdenCompra/Items/News/Item[1] ''))
passage (select Orden_Detalle
of xml_Orden_Detalle
where Fecha_Ordenes = 20150101 and Correlativo_ordenes = 83)
path of columns Correlativo varchar2 (15) 'Correlativo '.
, Path of varchar2 (15) CodigoCategoria 'CodigoCategoria '.
, Path Categoria Varchar2 (100 CHAR) "category.
, Path of varchar2 (15) CodigoProducto 'CodigoProducto '.
, Path of Producto Varchar2 (100 CHAR) 'product '.
, Path of the EspecificacionComprador Varchar2 (100 CHAR) "EspecificacionComprador".
, Path of the EspecificacionProveedor Varchar2 (100 CHAR) "EspecificacionProveedor".
, Amount varchar2 (15) path 'amount '.
, Path of the Moneda Varchar2 (16 CHAR) "Moneda".
, Path of varchar2 (15) PrecioNeto 'PrecioNeto '.
, Path of varchar2 (15) TotalCargos 'TotalCargos '.
, Path of varchar2 (15) TotalDescuentos 'TotalDescuentos '.
, Path of varchar2 (15) TotalImpuestos 'TotalImpuestos '.
, Path of varchar2 (15) total 'Total '.
);
delivery the following error:
Informed of error:
SQL error: ORA-31038: Valor number no valido: "420,05."
«31038 00000 - "value not valid %s: \"%s\»»
* Cause: The text in the XML document does not represent a valid
value given the data type and other constraints in the schema.
* Action: Make sure the value specified in the XML documents is valid
regarding the data type and other constraints in the schema.
Note that extract le agenda [1] but the reported error is à la point [7]
Please If anyone can Help me with le solution for no report error
Thank you very much in advanceCarlosin Chile, the decimal point are ', 'no'.', the xml data table is OK for us
You do not understand.
Regardless of the locale, numeric values limited by a type of data XS: Decimal must use a point in a correct XML representation, otherwise, the document is not valid by the XSD.
(3) TO_CHAR (...) the code is part of a procedure
Again, do NOT build a dynamic path like that.
Why not just move through the records returned by the query (if you need close at all)?
FOR rec in)
SELECT x.*
From your_table t
XMLTABLE (...) x
)
LOOP
END LOOP;
What is the role of the v_CantItems variable? Paging?
Whence its value?
Maybe you are looking for
-
remove the unwanted app IOS 10
I did the latest iPhone OS update my iPhone 5 c and have an undesirable application that has just been published. How can I remove that or any unwanted apps? Thank you The Duke
-
Text vs iMessage (green and blue)
When I send a text to a particular person turns green (text) but when they text me I get blue (iMessage). It appears a two different conversations. Why is this and how do I default iMessage?
-
1. can I do a clean install if I have Vista? If I do format and create different partitions?2. how long will I wait? I've already waited 2 months and Windows 7 was eventually delivered but on-site DPD (German and Polish), he said that they do not hav
-
How did I not have movement and fitness on my iPhone 5
I have an iPhone with IOS 9.2 5 32 gb, I have the health app but it doesn't count my steps. When examining the privacy setting I seem to be part of the movement and fitness. I just asked why this might be the case.
-
Songs bought through PC automatically added to the iPhone
I have a playlist called "Bob's IPhone" that I put all the songs I want on my phone only. I could buy an entire album via iTunes, but I want only a track on my phone, I put in this playlist. Lately, he puts all the songs that I buy on my phone. I