ASM: determine the total number of bytes read/written & Ops / s

Similar Questions

• Determine the Total number of images in a loaded SWF file

  I used the loader class and the load method to load a swf file that has multiple frames.  Does anyone have a suggestion how to determine the total number of frames in the SWF file script after loading?

  AFTER loading is complete (that is to say, use a listener), you can access the content property of the loader (cast as a movielcip):

  MovieClip (yourloader.content) .totalFrames;

• How to determine the total number of images in the external .swf file loaded

  I have to be able to load both external .swf files and make them play in order. To do this, I need to know the number of images in the first .swf file so I can check _currentframe against _totalframes to determine when he is finished playing so that I can load another.

  Most of the stuff I see indicate that _totalframes on an external .swf can be determined by loading the .swf in a container clip and then check using a listener in the .onLoadInit. Like this:

  ------------------------------------------------------------------------------------------ ----------------------------

  this.createEmptyMovieClip ("tester_mc", 1);
  var mcListener:Object = new Object();

  mcListener.onLoadInit = {function (target_mc:MovieClip)}
  target_mc.onEnterFrame = function() {}
  If (this ._currentframe > = this ._totalframes) {}
  trace ("total frames =" + this ._totalframes);
  delete this.onEnterFrame;
  } else {}
  trace (target_mc._currentframe + "OF" + target_mc._totalframes);
  }
  }
  }

  var test_mc:MovieClipLoader = new MovieClipLoader();
  test_mc. AddListener (mcListener);
  test_mc.loadClip ("Ad_Group.swf", tester_mc);

  ------------------------------------------------------------------------------------------ -------------------------------------

  Unfortunately, this doesn't seem to work. The trace will always return a total number of frames of 1.

  I guess it's because the container clip has only 1 frame, and the external .swf timeline seems to be ignored.

  I would appreciate any ideas on how to raise the total number of frames of an external .swf file or, Alternatively, put it another way when it's done playing. (Not only the loading, but play until the end.)

  TIA,

  C

  I guess it's because the container clip has only 1 frame, and the external .swf timeline seems to be ignored.

  I wouldn't imagine. My guess is that the main scenario for the external swf file has only 1 frame and the rest of the animation is inside a movieclip in this timeline. You publish this swf? Can you open the FLA and check how many images is open on the main timeline?

  The approach that you have mentioned is about what there is. But he knows check a chronology. If there are many nested movieclips, it may be impossible to understand what timeline you really want to be 'THE' full chronology.

  If you have the FLA, you can have the video call function on the _root timeline which tells the main swf that has completed a movieclip or something like that.

  Also, I have in my head somewhere that I recently saw something that someone made similar to this one, but do not remember... If it appears in my head that I will post.

• total number of bytes of network traffic for a given period and given a vm guest

  Hello

  I want to see the total number of bytes of network traffic a given virtual machine generates in a give period.

  I think it's possible with a great metric but don't know how.

  Any help is welcome.

  Kristof

  This is for vrops x 6

  1. create a metric configuration

  
   
      
  
          
          
          
      
   

  2. create a new dashboard with a list of objects and graphic metric

  3 edit the object list widget, and the filter object type\Virtual Machines and save

  4. change the metrics graph and select the metric config that you created in step 1 in the metrix configuration box and save it

  5 in Widget interactions select list of objects in the menu drop-down and click on apply Interactions and save the dashboard

  When you open the control panel and select a virtual machine from the list (or search for it in the filter), it will display the average amount of data received and transmitted in Kbps in the metric table. Use the controls to date to specify when you want to see the data to and from.

  Hope this helps

• ORA-27063: number of bytes read or written is incorrect, no space available on the device (DB went down due to no space for the temporary file)

  Hi all

  Recently, we encountered a non usual problem with restarting the database because of the ORA-27063

  number of bytes read or written is

  incorrect #IBM AIX RISC System/6000 error: 28: no space is available on the device.

  Database version: 11.2.0.4

  Type of system: SAP database

  Computer type: AIX

  When the investigation we found the full systems 100% file where resided temporary files. So to solve it, we simply added tempfiles on other file systems.

  My question is why the db restarted. As far as I know the TEMP tablespace will throw an error (unable to extend TEMP of 128 segment in tablespace TEMP) every time that

  There is no free space.

  Secondly, to avoid the above, that we began to find the TEMP files from file systems and if found 90% and above then began adding space on all the production servers to avoid

  reoccurance of this issue. Is - this recommended...?

  Thank you

  Hello

  It can be consider as an alternative (using a cron task) or if you watch in em12c could control, so you can host some metrics to check temp space.

  Now, one last thing to consider, it is not advisable to go to increase temp (to be honest, we need optimize queries, why won't they are eating take so much space)

  Third step, you can put a profile (limit) so much space is used, then kill the session so that they eat no place (so that db will not get crashed at least... only session will be started - we can very well with that, instead of hammering db)

  -Pavan Kumar N

• Show a total number of emails in Windows Live Mail, not only the total number in each file.

  Windows Live Mail on Windows 7-

  Is there a way to display the total number of emails you have? as opposed to simply show how many e-mail messages are in each file?

  In the section filters, it is customary to say: email unread (12).

  I did what you say.

  Now, in the views section fast, he added another line, so he said:

  Unread mail (12)

  All emails (12)

  But I know a have a few thousand emails into different folders, so, over 12 emails.

  I remember for a long time with a program called Eudora, I think, and he had a page that listed all of your files, with the number of emails in each file, and a total of all THE emails at the bottom.

  Of course, I can add them by hand, but just thought it might be something that, for me, added.

  cranberrymix,

  In my WLM 2011, category "All electronic" shows only not reading the mails for all accounts. Once the emails are read, the figure in brackets will be gone too.
  I think that it is applicable to your case.

  One last thing, if you left click all emails, you will see a long list of e-mails.

• Unable to get the total number of records processed by the processor of trade rules

  Details of the environment

  ======================

  Disqualification Version: 12.1.3.0.0

  
  

  I use a business rules processor to implement multiple business rules on one record and I am looking for a summary of the number of records increased and does not have a specific rule.

  
  To illustrate:
  Suppose there are 2 rules, invalid number in Column1 and valid number on Column2.
  10 records to process and 3 folders don't rule 1 (valid on column1) and 9 entered failure of rule 2 (valid number on Column2).

  In the browser of result of the processor Business, the number of past records and failed is displayed but is not part of the output of the processor itself. In the example above, there will be 1 pass and 9 fail records and given the values of said the total number of records can be derived which is 10.

  This is why the expected output will be:
  Success of failure
  Rule 1:7 (10-3) 3
  Rule 2: 1 (10-1) 9
  Note: The number of records that failed can be derived from the table of the rule ID but I don't know how to get the total number of records in order to calculate the number of records that a given rule.

  I tried to publish the County of acceptance and rejection in the browser of result of the processor Business in an intermediate table and ask the same intermediate table to get the pass and fail values but Disqualification does not allow to write and read the same intermediary object in a single process. What is the best way to get the number of records total handled by the processor business rules? This kind of attributes (that do not exist only in the browser of result) can be included in the output of the processor in the next version of the Disqualification?

  In addition, the intermediate table contains only 1 sheet with pass and failure values while the exceptions which have individual failure on each rule contains 12 Archives. What would be the best approach to merge a single record into multiple records according to the example below?

  Staging table
  Success of failure
  1 9

  Exception table
  Single ID ID rule
  Rule 1 Record1
  Rule 1 Record2
  Rule 1 record Record3
  Rule 2 Record1

  Exception table with: staging Table data merge
  Rule ID ID Unique Pass Fail Total
  Rule 1 1 9 10 Record1
  Rule 1 1 9 10 Record2
  Recording rule 1 Record3 1 9 10
  Record1 rule 2 1 9 10
  
  Please notify.

  Hi Jason,

  The best way to explain how to do this is with an example project (DXI). I'll send you one in offline mode.

  -Mike

• How to get the Total number of nodes XML?

  Hi all

  I have a Flash program that I do in Actionscript 3, using CS6.

  I use the XMLSocket class to read XML data. I'll write some examples of XML that is sent to the Flash

  program below...

  I know with this line here (below) I can access the 4th 'element or node' of XML data.

  To access the XML nodes/elements:

  * I created a Variable XML, called xml, and "e.data" contains ALL the XML data
  var XML = XML (e.data);

  Access to the 4th item of the data:

  . xml MESSAGE[3].@VAR;          -> 'loggedOutUsers '.

  . xml MESSAGE[3].@TEXT;         --->     "15"

  EXAMPLE OF XML DATA:

  
  

  < FRAME >

  0 < VAR MESSAGE = "screen2Display" TEXT = "FRAME_1" / >

  1 < VAR MESSAGE = "numUsers" TEXT = "27" / >

  2 < VAR MESSAGE = "loggedInUsers" TEXT = "12" / >

  3 < VAR MESSAGE = "loggedOutUsers" TEXT = "15" / >

  4 < VAR MESSAGE = "admins" TEXT = "2" / >

  < / FRAMEWORK >

  I'm new to Flash and Actionscript but I am very familiar with other languages and how paintings and other work, and I know for

  example, in a Shell Script to get the total number of items in an array called 'myArray' I wanted to write something like

  This-> ${#myArray [@]}. And since the data processing XML looks a lot like a table I thought that there was perhaps

  a way to access the total number of "nodes or elements" in the XML data...?

  Any thoughts would be much appreciated!

  Thanks in advance,

  Matt

  even if you don't need to run to the loop to know the length

  var levelList: XMLList = xml.children ();

  levelList.length (); This will give you the length of all children in your case of length MESSAGE of nodes;

  Pls click useful if my answer is helpful.

  Thank you

  Bala

• Exempt certain pages of the total number of pages PDF

  I realize that this is probably an unusual request...

  But is it possible to exempt some pages from the total number of pages of a PDF document.

  I have a 23-page document, but 3 of these pages contain a large image rather than the main body of the text.

  When I open the document in Acrobat Reader, the page counter will display "1/23.

  But somehow can exempt pages 3 image the total number of pages for the counter page displays ' 1/20' without having to REMOVE the image of the document pages?

  Is - it somehow possible?

  You can not really completely ignore these pages in the number of pages, but you can set their labels to something else. For example, if you have a 23-page document, this code will set the first 3 pages of 'i' and the rest of 1 to 20:

  this.setPageLabels (0, ["r", "", 1]);

  this.setPageLabels (1, ["r", "", 1]);

  this.setPageLabels (2, ["r", "", 1]);

  this.setPageLabels (3, ["D", "", 1]);

  The total number of pages will still be 23, however. There is nothing you can do about it.

• ORA-27063: skgfospo: number of bytes read or written is incorrect

  Hi all
  
  One of my prod db received the Oracle error "ORA-27063: skgfospo: number of bytes read or written is incorrect.
  How to investigate this. DB works fine now.
  
  Oracle version:
  
  Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64 bit Production
  PL/SQL Release 9.2.0.7.0 - Production
  CORE 9.2.0.7.0 Production
  AMT for Solaris: release 9.2.0.7.0 - Production
  NLSRTL Version 9.2.0.7.0 - Production
  
  OPERATING SYSTEM:
  
  XXXXXXX of SunOS 5.8 Generic_117350-33 sun4u sparc SUNW, Sun-Fire-V490
  
  
  Thanks in advance.

  Gowin_dba,

  You can check the file alert.log for awhile and if you do not see that the error does not happen and if you see the archivelogs getting generated that overcome you this problem.

  Please let me know if you need more assistance.

  Hope that helps.

  Ogan

• When you use find on the page (ctrl + F on Windows) it is a message indicating the total number of matches. What does the first number?

  When you use find on the page (ctrl + F on Windows) it is a message indicating the total number of matches. What does the first number?
  I'm more interested in the case when this number is smaller than the total.

  Hello

  I think you mean the text stating "x of there matches", to the right of the box where you entered the search term.

  The first number ("x" in my example above) indicates the current entry highlighted on the page that matches the search phrase. If you use the upper and down arrows to navigate through the instances of this term on the page, you will see this number go up and down.

  I hope this helps, but if not please come back here and we can look at another solution for you.

• In 12.4.1.6, where do you see the total number of songs in your iTunes library?

  In 12.4.1.6, where do you see the total number of songs in your iTunes library?

  In my case (iTunes on OS X 10.9.5 12.4.1), in the library section of the box I choose songs and the number appears in the status bar at the bottom of the iTunes window.  If you do not have the visible status bar, it can be activated from the iTunes menu bar, display > show status bar.

  Good luck

  SRB

• How can I find the total number of contacts on the iPhone 6 s?

  I used to be able to see the total number of contacts on my iPhone 6s, however, does not appear more.  How can I fix it?

  Go to iCloud.com then in contacts and made scroll down - it's the only place where I was able to find

• How can I find the total number of items in a dim multi table

  How can I find the total number of items in a simple Sun table or multi?

  For example, a table 2 x 3 has 6 elements, and a 2 x 3 x 4 to 24. How can I calculate this very easily - is there a single VI do that?

  David

  Use "table size" (palette table) followed by "multiply the elements of the array" (digital palette)

  

  (Also works well for 3D arrays and higher)

• Function to count the total number of data channels

  I know that I had stumbled on a tiara function that returns the number of data in all of my data channels.  I can't seem to find the thread where I had seen it.  I'm looking to replace a script a long time user with this simple function in my future coding.

  Thank you!

  Hi CrshTstr,

  I actually still use GlobUsedChn for that.  In more recent versions of DIAdem, you can use commads as GroupChnCount() or Data.Root.ChannelGroups (1). Channels.Count to return the number of channels in a particular group.  But regardless of which group the channels are in the GlobUsedChn variable always returns the total number of channels currently on the data portal.

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments