ORA-28528 errors or incomplete data when access an Informix Server

Similar Questions

• ORA-28545: error diagnosed by Net8 when connecting to an agent

  Hi all

  This question was asked several times in this forum and I went to many discussions in this forum, but unfortunately I failed.

  I want to connect to MySQL database to oracle. I have the following configurations.

  1. Oracle database edition company 12 c (12.1.0.2.0) 64 bits on 64-bit Windows server 2012
  2. I have 5.6.11 MySQL on windows 7 64 bit
  3. I downloaded the driver site for delivery of oracle ODBC (MySQL Connector/ODBC 5.3.4 MSI for Windows x 86 (64 bit))
  4. I have install ODBC on my oracle server, a full install which installs the Unicode and Ansi versions.
  5. I create the connection ODBC for Unicode by going to control panel-> administrator tools-> (64-bit) ODBC Data Sources-> system DSN. I test and the test succeeded.
  6. I have set up my files Listner.ora, Tnsname.ora and initmysql.ora as below;

  Listner.ora

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = c:\app\Administrator\product\12.1.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:c:\app\Administrator\product\12.1.0\dbhome_1\bin\oraclr12.dll")
  )
  (SID_DESC =
  (SID_NAME = mysql)
  (ORACLE_HOME = C:\app\Administrator\product\12.1.0\dbhome_1)
  (PROGRAM = dg4odbc)
  (ENVS = LD_LIBRARY_PATH = C:\app\Administrator\product\12.1.0\dbhome_1\LIB)
  )
  )

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = ORADEV.hct.org)(PORT = 1521))
  )

  Tnsnames.ora

  PDBORCL =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ORADEV.hct.org)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = pdborcl.hct.org)

  )

  )

  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = ORADEV.hct.org)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl.hct.org)
  )
  )

  MySQL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = N410FS02)(PORT = 1521))
  (CONNECT_DATA =
  (SID = mysql)
  )
  (HS = OK)
  )

  initmysql.ora (C:\app\Administrator\product\12.1.0\dbhome_1\hs\admin\)

  HS_FDS_CONNECT_INFO = mysql

  HS_FDS_TRACE_LEVEL = OFF

  then I stop and start the listener, the listener status is less than

  LSNRCTL for 64-bit Windows: Version 12.1.0.2.0 - Production on April 23, 2015 09:16
  : 52

  Copyright (c) 1991, 2014, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=ORADEV.hct.org) (PORT = 152
  (1)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  TNSLSNR for Windows 64-bit version: Version 12.1.0.2.0 - Prod
  ction
  Start date April 23, 2015 09:13:56
  Uptime 0 days 0 h 2 min 59 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  C:\app\Administrator\product\12.1.0\dbhome_1\network\a Listener parameter file
  dmin\listener.ora

  
  C:\app\Administrator\diag\tnslsnr\ORADEV\listener\aler log listener
  t\log. XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ORADEV.hct.org) (PORT = 1521)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=127.0.0.1) (PORT = 1521)))
  Summary of services...
  Service 'CLRExtProc' has 1 instance (s).
  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
  "Mysql" service has 1 instance (s).
  "Mysql", status UNKNOWN instance, has 1 operation for this service...
  Service 'orcl.hct.org' has 1 instance (s).
  Instance "orcl", State LOAN, has 1 operation for this service...
  Service 'orclXDB.hct.org' has 1 instance (s).
  Instance "orcl", State LOAN, has 1 operation for this service...
  Service 'pdborcl.hct.org' has 1 instance (s).
  Instance "orcl", State LOAN, has 1 operation for this service...
  The command completed successfully

  tnsping MySQL

  AMT Ping Utility for 64-bit Windows: Version 12.1.0.2.0 - Production on 23-APR-2
  015 09:17:54

  Copyright (c) 1997, 2014, Oracle.  All rights reserved.

  Use settings files:
  c:\app\Administrator\product\12.1.0\dbhome_1\network\admin\sqlnet.ora

  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = N410FS02)
  () (PORT = 1521)) (CONNECT_DATA = (SID = mysql)) (HS = OK))
  OK (40 msec)
  
  

  then I open sqlplus and connect to my plug-in database as user sys and create a link from public database for the test scheme that I have created in the MySQL database.

  create public database link mysql connect to test identified by test using 'mysql';
  

  then I try the table1 which lies in the scheme of test of MySQL to sqlplus as below

  SQL> select * from table1@mysql;
  select * from table1@mysql
                       *
  ERROR at line 1:
  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Unable to retrieve text of NETWORK/NCR message 65535
  ORA-02063: preceding 2 lines from MYSQL
  
  

  I have tried versions of Ansi and Unicode ODBC, but the same question.

  where is the problem in my setup?

  Thank you.

  You use the wrong host name in the tnsnames.ora.

  Take a look at the Oracle listener - it is configured with the address: (ADDRESS = (PROTOCOL = TCP) (HOST = ORADEV.hct.org)(PORT = 1521))

  In your tnsnames.ora you specified in the mysql alias: (ADDRESS = (PROTOCOL = TCP) (HOST = N410FS02)(PORT = 1521))

  It does not work. Alias configured in the tnsnames.ora AMT must reference an Oracle listener who begins the process of bridge, so in your case at ORADEV.hct.org.

  So please correct your tnsnames.ora entry:

  MySQL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ORADEV.hct.org)(PORT = 1521))

  (CONNECT_DATA =

  (SID = mysql)

  )

  (HS = OK)

  )

• ORA-02354: Error exporting/importing data, ORA-01555: snapshot too old: rollback segment number with the name "" too small

  Hello

  I am getting below error while taking expdp backup table of BLOB.

  ORA-31693: Data Table object 'HCLM_ADMIN '. "' SCAN_UPLOADEDFILES_TEMP ' failed to load/unload and being ignored because of the error:

  ORA-02354: Error exporting/importing data

  ORA-01555: snapshot too old: rollback segment number with the name "" too small

  ORA-22924: snapshot too old

  ORA-31693: Data Table object 'HCLM_ADMIN '. "' TPA_FAXWATCHER ' failed to load/unload and being ignored because of the error:

  ORA-02354: Error exporting/importing data

  ORA-01555: snapshot too old: rollback segment number with the name "" too small

  ORA-22924: snapshot too old

  We have already set aside retention to 50000 .table structure are:

  SQL > show Cancel parameter

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  UNDO_MANAGEMENT string AUTO

  UNDO_RETENTION integer 50000

  undo_tablespace string UNDOTBS1

  SQL > alter table hclm_admin. SCAN_UPLOADEDFILES_TEMP modify lob (FILE_BLOB) (RETENTION);

  Modified table.

  SQL > select nom_de_colonne, pctversion and retention

  from dba_lobs where owner = 'HCLM_ADMIN' and table_name = "SCAN_UPLOADEDFILES_TEMP";

  COLUMN_NAME

  --------------------------------------------------------------------------------

  PCTVERSION RETENTION

  ---------- ----------

  FILE_BLOB

  50000

  SQL > alter table hclm_admin. TPA_FAXWATCHER modify lob (FILEDATA_BLOB) (RETENTION);

  Modified table.

  SQL > select column_name, pctversion and retention of dba_lobs where owner = 'HCLM_ADMIN' and table_name = "SCAN_UPLOADEDFILES_TEMP";

  Column_name PCTVERSION RETENTION

  ---------- ----------

  FILE_BLOB

  50000

  CREATE TABLE HCLM_ADMIN. TPA_FAXWATCHER

  (

  FILENAME_VAR VARCHAR2 (50 BYTE),

  DATE OF CREATED_DATE_DTE,

  FILEPATH_VAR VARCHAR2 (100 BYTE),

  DATE OF TIMESTAMP_DTE,

  FAXNO_VAR VARCHAR2 (15 BYTE),

  DEPARTMENT_VAR VARCHAR2 (50 BYTE),

  REQUESTTYPE_VAR VARCHAR2 (50 BYTE),

  TAGTO_VAR VARCHAR2 (50 BYTE),

  REMARK_VAR VARCHAR2 (1000 BYTE),

  DOCTYPE_VAR VARCHAR2 (50 BYTE),

  TAGTOVALUE_VAR VARCHAR2 (50 BYTE),

  DOCTYPE_OTHER_VAR VARCHAR2 (50 BYTE),

  HEGIC_NO_VAR VARCHAR2 (50 BYTE),

  RECORDNO_NUM NUMBER OF NON-NULL,

  FILEDATA_BLOB BLOB,

  DATE OF FAXLOCKDATE_DTE,

  NUMBER OF FAXLOCKSTATUS_VAR

  FAXLOCKBYUSER_VAR VARCHAR2 (50 BYTE)

  )

  (STORE AS) LOB (FILEDATA_BLOB)

  TABLESPACE HCLM_ALERTSVC

  ALLOW ONLINE STORAGE

  8192 CHUNK

  RETENTION

  NOCACHE

  LOGGING

  INDEX)

  TABLESPACE HCLM_ALERTSVC

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  ))

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  ))

  TABLESPACE HCLM_ALERTSVC

  PCTUSED 0

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  )

  LOGGING

  NOCOMPRESS

  NOCACHE

  NOPARALLEL

  MONITORING;

  ALTER TABLE HCLM_ADMIN. (ADD) TPA_FAXWATCHER

  KEY ELEMENTARY SCHOOL

  (RECORDNO_NUM)

  USING INDEX

  TABLESPACE HCLM_ALERTSVC

  PCTFREE 10

  INITRANS 2

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  ));

  CREATE TABLE HCLM_ADMIN. SCAN_UPLOADEDFILES_TEMP

  (

  NUMBER OF TEMPID_NUM

  SESSION_ID VARCHAR2 (200 BYTE),

  NUMBER OF UPLOADFILE_NUM

  NUMBER OF DOCNO_NUM

  NUMBER OF SCANJOB_NUM

  FILENAME_VAR VARCHAR2 (200 BYTE),

  FILETYPE_VAR VARCHAR2 (200 BYTE),

  FILE_BLOB BLOB,

  VARCHAR2 (200 BYTE) FLAG,

  NUMBER OF USERID_NUM

  CREATED_DATE DATE

  )

  (STORE AS) LOB (FILE_BLOB)

  TABLESPACE PHCLMDBTBS

  ALLOW ONLINE STORAGE

  8192 CHUNK

  RETENTION

  NOCACHE

  LOGGING

  INDEX)

  TABLESPACE PHCLMDBTBS

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  ))

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  ))

  TABLESPACE PHCLMDBTBS

  PCTUSED 0

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  )

  LOGGING

  NOCOMPRESS

  NOCACHE

  NOPARALLEL

  MONITORING;

  Kind regards

  Hello

  First check the lob corrupt as:

  SQL > create table corrupted_lob_data (corrupted_rowid rowid);

  Table created.

  SQL > set off concat

  SQL >

  declare

  SQL > error_1555 exception;

  pragma exception_init (error_1555,-1555);

  number num.

  Start

  for cursor_lob in (select rowid r, & lob_column of table_owner. & table_with_lob) loop

  Start

  NUM: = dbms_lob.instr (. cursor_lob & lob_column, hextoraw ('889911'));

  exception

  When error_1555 then

  insert into corrupted_lob_data values (cursor_lob.r);

  commit;

  end;

  end loop;

  end;

  2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

  17.

  Enter the value of lob_column: FILE_BLOB

  Enter the table_owner value: hclm_admin

  Enter the value of table_with_lob: SCAN_UPLOADEDFILES_TEMP

  former 6: for cursor_lob in (select rowid r, & lob_column of table_owner. & table_with_lob) loop

  6 news: for cursor_lob (select rowid r, FILE_BLOB of hclm_admin loop SCAN_UPLOADEDFILES_TEMP.)

  old 8: num: = dbms_lob.instr (. cursor_lob & lob_column, hextoraw ('889911'));

  8 new: num: = dbms_lob.instr (cursor_lob. FILE_BLOB, hextoraw ('889911'));

  PL/SQL procedure successfully completed.

  SQL > select * from corrupted_lob_data;

  CORRUPTED_ROWID

  ------------------

  AAASF/AAKAABacyAAA

  To resolve this problem, we have 3 options

  (1) to restore and recover the LOB segment using physical backup.

  (2) empty LOBs affected using the UPDATE, as mentioned in the Note 787004.1statement:

  SQL > update SCAN_UPLOADEDFILES_TEMP

  Set FILE_BLOB = empty_blob()

  where rowid in (select corrupted_rowid

  of corrupted_lob_data);

  SQL > commit;

  (3) perform the export, excluding the corrupt ROWID. by adding the following to export command parameter

  Query =------"where rowid not in (\'AAASF/AAKAABacyAAA\'\) \ \" "

  Kind regards

  Alok Dwivedi

• connection mysql and oracle ORA-28545: error diagnosed by Net8 when connecting to an agent

  Hi all

  I have Oracle 10.2.0.5 server and MySQL 5.3 on windows environment. all are 64-bit.

  I want to connect to MySQL. I do the following

  Configure Listner.ora

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = PLSExtProc)

  (ORACLE_HOME = C:\oracle\product\10.2.0\db_2)

  (= Extproc PROGRAM)

  )

  (SID_DESC =

  (GLOBAL_DBNAME = ORCL)

  (ORACLE_HOME = C:\oracle\product\10.2.0\db_2)

  (SID_NAME = ORCL)

  )

  (SID_DESC =

  (SID_NAME = mysql)

  (ORACLE_HOME = C:\oracle\product\10.2.0\db_2)

  (PROGRAM = HSODBC)

  (ENVS = LD_LIBRARY_PATH = C:\oracle\product\10.2.0\db_2\LIB)

  )

  )

  LISTENER =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = oradev.hct.org) (PORT = 1521))

  )

  Tnsnames.ora configuration

  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = oradev.hct.org) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )

  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  MySQL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST= 10.153.103.5) (PORT = 1521))
  (CONNECT_DATA =
  (SID = mysql)
  )
  (HS = OK)
  )

  create file initodbc.ora in the folder hs

  HS_FDS_CONNECT_INFO = mysql

  HS_FDS_TRACE_LEVEL = OFF

  Restart the listner

  tnsping

  C:\users\administrator > tnsping mysql

  AMT Ping Utility for 64-bit Windows: Version 10.2.0.5.0 - Production 08-NOV-2
  015 13:02:52

  Copyright (c) 1997, 2010, Oracle.  All rights reserved.

  Use settings files:
  C:\oracle\product\10.2.0\db_2\network\admin\sqlnet.ora

  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 10.153.103.5)
  (PORT = 1521)) (CONNECT_DATA = (SID = mysql)) (HS=OK))
  OK (0 msec)

  Create the connection odbc for Unicode

  

  the test is successful

  now, I create the dblink

  create public mysql database link to connect to cssDBTeam identified by oracle using "mysql";
  
  

  then try to select from a table inside the MySQL database

  SQL > select * from appeal@mysql;

  Select * from appeal@mysql

  *

  ERROR on line 1:

  ORA-28545: error diagnosed by Net8 when connecting to an agent

  Cannot retrieve the text of the message NETWORK/NCR 65535

  ORA-02063: preceding 2 lines of MYSQL

  How could I solve this problem?

  Thank you.

  Hello

  I realize that your problem is that 10.2 HSODBC was never focused on the Windows 64-bit platform and was only available on 32-bit Windows.  You can not install the 32-bit on WIndows 64-bit HSODBC.

  Your only option is to install 11.2 DG4ODBC on your platform Windows 64 - bit, or if you have a RDBMS 10.2 installed on another platform, then you could use HSODBC as part of this installation and connect from the RDBMS on Windows 64 - bit using the links in the database.  HSODBC 10.2 software could not be installed as a stand-alone product and was only available as part of an RDBMS install.

  Kind regards

  Mike

• Once again - ORA-28545: error diagnosed by Net8 when connecting to an agent

  I am trying to connect to a SQL server server 2012

  I make the connections ODBC (called MOFIBO2, MOFIBO3, MOFIBO4) and I have a successful connection to then SQL server.

  The Oracle database is:

  Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production

  I made 3 versions of the initdg4odbc.ora and they all look the same:

  # This is an example of initialization file of the agent that contains the HS settings

  # necessary for the database to ODBC gateway

  #

  # HS init parameters

  #

  HS_FDS_CONNECT_INFO = MOFIBOx (MOFIBO2, MOFIBO3 and MOFIBO4)

  HS_FDS_TRACE_LEVEL = off

  #

  # Required for the non-Oracle system environment variables

  #

  #set < varenv > = < value >

  My lisener.ora look like this:

  listener.ora # Network Configuration file: C:\app\Administrator\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = RESP-ora01)(PORT = 1521))

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = PLSExtProc)

  (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)

  (= Extproc PROGRAM)

  )

  (SID_DESC =

  (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)

  (SID_NAME = RESPTEST)

  )

  (SID_DESC =

  (SID_NAME = MOFIBO2)

  (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)

  (PROGRAM = dg4odbc)

  )

  (SID_DESC =

  (SID_NAME = MOFIBO3)

  (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)

  (PROGRAM = dg4odbc)

  )

  (SID_DESC =

  (SID_NAME = MOFIBO4)

  (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)

  (PROGRAM = dg4odbc)

  )

  )

  ADR_BASE_LISTENER = C:\app\Administrator\product\11.2.0\dbhome_1\log

  And my share of tnsnames.ora mofibo then look like this (I did three variants as different "manual" using different methods):

  MOFIBO2 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521))

  (CONNECT_DATA =

  (SID = MOFIBO2)

  )

  (HS = OK)

  )

  MOFIBO3 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SID_NAME = MOFIBO3)

  )

  (HS = OK)

  )

  MOFIBO4 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MOFIBO4)

  )

  (HS = OK)

  )

  When tnsping to all three versions I get this:

  C:\users\administrator > tnsping mofibo2

  AMT Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on April 24, 2014 12:48:17

  Copyright (c) 1997, 2011, Oracle.  All rights reserved.

  Use settings files:

  C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521)) (CONNECT_DATA = (SID = MOFIBO2)))

  HS = OK))

  OK (10 ms)

  C:\users\administrator > tnsping mofibo3

  AMT Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on April 24, 2014 12:48:23

  Copyright (c) 1997, 2011, Oracle.  All rights reserved.

  Use settings files:

  C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521)) (CONNECT_DATA = (SERVER = DELTOMBE

  (RELATED) (SID_NAME = MOFIBO3)) (HS = OK))

  OK (10 ms)

  C:\users\administrator > tnsping mofibo4

  AMT Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on April 24, 2014 12:48:27

  Copyright (c) 1997, 2011, Oracle.  All rights reserved.

  Use settings files:

  C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521)) (CONNECT_DATA = (SERVER = DELTOMBE

  (RELATED) (SERVICE_NAME = MOFIBO4)) (HS = OK))

  OK (0 msec)

  
  

  I created three database link with then in following (user name and password was in the wright case):

  create database MOFIBODB2 link to connect to the "username <>' identified by"password <>"with"MOFIBO2 ";

  create database MOFIBODB3 link to connect to the "username <>' identified by"password <>"with"MOFIBO3 ";

  create database MOFIBODB4 link to connect to the "username <>' identified by"password <>"with"MOFIBO4 ";

  
  

  When I tried to select from a table (select * from clients @ < DATABASELINKHERE >) I get errors (replace MOFIBO2 with MOFIBO3/4 and the same error occurs):

  SQL > select * from customers@MOFIBODB2;

  Select * from customers@MOFIBODB2

  *

  ERROR on line 1:

  ORA-28545: error diagnosed by Net8 when connecting to an agent

  Cannot retrieve the text of the message NETWORK/NCR 65535

  ORA-02063: preceding 2 lines of MOFIBODB2

  
  

  What was my mistake?
  

  
  

  Hello

  In the listener.ora, you have the host as -

  (HOST = RESP-ora01)

  but in tnsnames.ora entries you have.

  (HOST = RESP-ouA02)

  The tnsnames.ora host must be the same as the host of the listener.

  Unless you have a listener running on the RESP-ouA02 it is not clear why the tnsping returns a result.

  Change the host in the tnsnames.ora and let us know what happens.

  Kind regards

  Mike

• ORA-01031: error of insufficient privileges when I try to use ALERT_QUE

  Hello
  I'm working on SYS. ATTENTION. THAT for system alerts. I use ODP in c# to connect to the Oracle database with username = SYSTEM, but when I try to survey or deque any message from SYS. ATTENTION. Que., its gives an error ORA-01031: insufficient privileges. I am not able to understand how to assign SYSDBA privileges to the SYSTEM and access ALERT_QUE to get alerts of system. I write my code below, please take a look and let me know what is wrong with the code. I am able to connect to the database using the SYSTEM, do I have to use username = SYS for access to the content database ALERT_QUE? Please let me know what is the solution.
  
  
  Con OracleConnection = new OracleConnection (constr.);
  
  Create the queue
  Queue OracleAQQueue = new OracleAQQueue ("sys.alert_que", con);
  
  Open connection
  con. Open();
  
  BEGIN txn for enqueue
  OracleTransaction txn = con. BeginTransaction();
  
  Set the type of message to the queue
  queue. MessageType = OracleAQMessageType.Raw;
  
  Prepare the message and payload BRUTE
  OracleAQMessage enqMsg = new OracleAQMessage();
  Byte [] bytePayload = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9};
  enqMsg.Payload = bytePayload;
  Agent [] OracleAQAgent = new OracleAQAgent [1];
  
  Agent [0] = new OracleAQAgent ("SUBSCRIBER1");
  enqMsg.Recipients = agent;
  enqMsg.SenderId = new OracleAQAgent ("SENDER1");
  
  Prepare for the queue
  queue. EnqueueOptions.Visibility = OracleAQVisibilityMode.OnCommit;
  
  Message from the queue
  queue. Enqueue (enqMsg);
  
  
  The code throws the exception to the line "queue. Enqueue (enqMsg); "saying: ORA-01031: insufficient privileges
  
  Published by: 916462 on February 27, 2012 03:31

  You are looking for a connection preferred, which means that you must connect as SYSDBA
  Check this doc on how to do it.
  http://docs.Oracle.com/CD/B19306_01/win.102/b14307/featConnecting.htm

• ORA-20505: error in DML - data in db Version has changed

  Hello
  Request Express 3.1.0.00.32
  I created a report and master detail in the sample Application on oracle.application.com. I get an error on my Master form when you click < Previous and Next >. I saw other problems of this kind in the forum, but it seems that everyone is a little different. Can someone help me with this error when you browse the next answer (s). Thanks in advance.
  
  ORA-20505: DML error: p_rowid = 6, p_alt_rowid CUSTOMER_ID =, p_rowid2 =, p_alt_rowid2 is. ORA-20503: current Version of the data in the database has changed since the user initiated the update process. current checksum = checksum of the "E9A08EDC02A82871E6865DB254B09ED2" = "39454529513F24BE60C167752BF71750."
  
  I created another page master detail and I don't have any errors when scrolling using the <>. This is a process that can be causing my error by using the page master original detail.
  

  DECLARE 
  CUSTOMER_ID VARCHAR(20);
  BEGIN
   SELECT CUSTOMER_ID INTO :P21_CUSTOMER_ID
   FROM DEMO_CUSTOMERS
   WHERE CUST_FIRST_NAME = :P21_CUST_FIRST_NAME;
  -- processing here
  EXCEPTION
    -- Catches all 'no data found' errors
     WHEN NO_DATA_FOUND THEN
       DBMS_OUTPUT.PUT_LINE
         ('No Data found for SEARCH on ' || CUSTOMER_ID);
  END;

  Published by: Charles was April 30, 2009 11:40

  Hi Charles,

  I had a look at your page 21.

  The problem was that the 'Values of Fetch 2' process was not conditioned and was running in the point of the process "on the load - before the Header." That meant he was running whenever the page is loaded. This process checks the value CUSTOMER_ID in P21_CUST_FIRST_NAME that, because the process of "search for the line...". "has not been performed at that time there (he turns"on the charge - after the Header"), will always return the same value CUSTOMER_ID from when the page was first loaded. The next/previous buttons, however, moved the front/rear P21_CUSTOMER_ID only one value (this became obvious when this field was changed from 'Hidden and protected' to 'Text'). Therefore, the data on the page was for "Albert" but was it to CUSTOMER_ID for any document was previous to the Albert one. Thus, moving next/previous always caused a mixture of real data.

  I changed the "Fetch values 2" process to depend on P21_CUSTOMER_ID is NULL. In this way, the CUSTOMER_ID value found ONLY by code when the page is loaded for the first time. Subsequently, it is controlled by the next/previous feature.

  Andy

• ORA-12541: error listener TNS:no when remote desktop connection

  Dear all,
  
  
  I installed Oracle 11 GR 2 on your windows desktop. I am able to connect to SQL from the command prompt but also using SQL Developer. However, when I try to connect to this instance from another post after adding the details in TNSNAMES.ora on the desktop remotely, I get the error: "ORA-12541: TNS:no listener.
  
  Can you please guide me if there are all the additional steps required to connect to the database from a remote office.
  
  Best regards
  
  Chandra

  Did you know your IP host address is?

  (HOST = 172.18.28.192) -
  

  Paste here please

   ipconfig
  

  Can you change IP to IP localhost host and restart the LISTENER with

   lsnrctl  stop
   lsnrctl  start
  

  Concerning
  Mr. Mahir Quluzade
  www.Mahir-quluzade.com

• Error of date when migrating to SQL Server to Oracle

  Hi all
  
  I'm the database migration SQL Server to Oracle.
  
  But the tool I use is not secret the date type GBA, so I'm stuck with tables that have particular date types.
  
  For example: the 'DATECAPTURED' column in the 'SIGNATURE' table in the SQL Server database has values:
  
  15-02-2013 10:03:48.387
  15-02-2013 10:01:05.930
  15-02-2013 09:59:07.197
  15-02-2013 09:50:15.797
  15-02-2013 09:39:15.557
  15-02-2013 09:37:12.643
  
  Why oracle can be able to accept this type of date format? :( I thought he is more intelligent than SQLserver :)
  
  My solution is to change any date to varchar2 (30).
  
  More bright ideas? while I cannot change data types?
  
  Thank you
  zxy

  yxes2013 wrote:
  Thank you Justin :)

  It's just that I have a lot to learn in a fastrack way, I am a very busy person :(

  Well, just a piece of advice. If you read the watch (and wait) documentation for the responses on the web and on various forums and try to do all the work, you are probably going to stay busy!

  in any case, I'll try another tool like sqldeveloper migration. For now, I have many things to research so I'd settle for the same time, workaround. New test is required for the tool.

  Good luck!

  I was taking just opportunities here if someone met the same problem as mine ;)

  It was not a problem of IMO, but was ignorance. People here know any Timestamp data type for SOME time I think and how, because they read the docs!

  Aman...

• Error on startup: "Could not access the local server", Windows Vista.

  When I start my Windows Vista laptop, I get this error.  This computer is connected to a wireless home network.  We believe that this error may also have an impact on the performance of the computer as some websites are not accessible as well as some programs that require a lot of memory.  Windows Defender ran a scan and found no problem, but my Virus of McAfee protection program will not start nor can I connect to my McAfee account on their web site.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Win 7 Pro - make a name of user and password request when accessing to the server computer in the workgroup. Credentials, then considered non valid.

  Recently bought a Dell Dimension 3847 with Windows 7 Pro to replace a workstation that is connected to a network that uses Windows Server 2003. I already set up two other PC's (not same model) with Win 7 Pro, for existing users and had no problems whatsoever. The user of this workstation is an existing one (implemented as an administrator).  I've set up his account and she joined the working group. The other computers in the workgroup are listed under network location. However, when I tried to access the server computer in the Working Group, I got a pop-up window asking for a username and password. This would not have taken place. However, I entered the username and password for that particular user and received a message that the user name and password were not valid. I set up my user account (it has administrative privileges too), on this computer, joined the Working Group, Windows recognizes the other computers in the workgroup, but when I tried to access the server computer I got the same pop-up and had the same problem with my credentials not being recognized. While remaining under my user name, I tried and then access the server computer again but when I arrived at the prompt for the user name and password, I used the 'Administrator' user name with the appropriate password (the credentials used to connect to the server computer) and it worked. I registered to the account of the other user and used the same method to access the server and it worked as well. Any ideas why the user credentials, other than the administrator account, are not recognized?

  Hello

  Sorry for the late reply.

  This problem is better suited in the TechNet forum where we have experts working on the same topic.

  Please post your request in the below link:

  https://social.technet.Microsoft.com/forums/en-us/home

  I hope this information helps, get back to us if you need help with Windows.

  Thank you.

• Error loading of data into Essbase of SQL Server

  Hello experts!
  
  I have another urgent and confusing issue. I am load data in a SQL Server view in Essbase (which is inverted with several columns of data) using ODI 11.1.1.5 and I get the following error at + "3-loading-SrcSet0-Load Data" + no:
  
  ODI-1227: SrcSet0 (load) task fails on the source of connection MICROSOFT_SQL_SERVER.
  + Caused by: java.sql.SQLException: incorrect syntax near the keyword 'View' [FMWGEN] [SQLServer JDBC Driver] [SQL Server] +.
  
  where 'View' is the name of the dimension (data) column in the SQL view.
  
  
  Please help me with advice! Thank you very much!

  Have you checked the generated SQL code, you can run the SQL generated directly in SQL server studio.
  If you use a column called view and one using a view?, if so this can be the question

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error message at startup: error loading: \App Data\Roaming\pxma2.dll C\Users\ (my name). Access denied

  Hello activity (yet) on Vista 32 bit, I receive a message (at the start). Error loading: \App Data\Roaming\pxma2.dll C\Users\ (my name). Access denied. Please notify.

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• Error 0 x 80070570 when you access my flash drive using windows 7

  I get an error 0 x 80070570 when you access my flash drive using windows 7, but the same flash drive works perfectly on two other PC's with Windows XP. It's frustrating because I need to backup and transfer files.

  Hello
   
  1 you get an error message with this error code?
  2. is it a problem with this particular flash drive only or all flash drives?
  
  Let us run the check disk utility.
  Here's how:
  a. open the computer by clicking the Start button, click computer.
  b. click the drive you want to check, and then click Properties.
  c. click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.
  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
  d. Click Start.
   
  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x8009030D. The internal error state is 10001.

  Hello

  I just bought an HP computer, Windows 8 Pro, x64bit. I worked OK for a week and then started to freeze. It freezes all the time. I'll send the error message in the event log. I'd appreciate your help because I've had enough of this gel and I turn it works all the time.

  Log name: System
  Source: Schannel
  Date: 12/07/2013-12:55:12
  Event ID: 36870
  Task category: no
  Level: error
  Keywords:
  User: SYSTEM
  Computer: Aleksey
  Description:
  A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x8009030D. The internal error state is 10001.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      36870
      0
      2
      0
      0
      0 x 8000000000000000
     
      7179
     
     
      System
      Aleksey
     
   
   
      Server
      0x8009030d
      10001
   
  

  Thank you

  Hi Aleksey,

  I appreciate the efforts that you put to publish the query on this forum.

  Please help me with the following information about this issue:

  (1) is the computer that is connected to a domain network?

  (2) when exactly you receive the error message? It is by accessing any application?

  If the computer is connected to a domain network, I suggest you send the request on 8 Windows IT Pro. Check out the link:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Please let us know if the computer is not in a domain. We will be happy to help you come.