Error on startup: "Could not access the local server", Windows Vista.

Similar Questions

• Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

  Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

  When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
  Tried the uninstall from Device Manager and restart the computer, still the same error.
  Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
  Checked Windows SP1 worked, still the same error.
  He got me completely baffled.
  Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
  I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
  Please help, I'm going crazy on this problem...

  The specifications of my devices are as follows:

  Computer

  Model:

  Alienware M14x

  Type of system:

  64-bit operating system

  Hard drive model:

  Portable Seagate Expansion 1 TB drive

  Hello

  28 error code means that the device was not fully installed.

  Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can update the drivers and check out them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information.

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps.

• While the research on how to correct an error in the observer of events, W32 tried merging a .reg file and got an error message saying could not access the registry, why?

  http://www.techexams.NET/blogs/jdmurray/synchronizing-the-time-on-Windows-XP-and-Vista-with-the-Internet/

  Hello, I'm under win xp pro svc pk 3, ie 8, x32bit.

  I received an error in the Event Viewer system for time synchronization W32. Help box said not to worry if it's a computer for the home user, but I'm tired of doing all the time, every day, so I tried to find a way to get rid of it. On bing, I found the above Web site and tried to merge the nist servers in my registry but I kept getting msg. :

  Impossible to import c:\doc and set\adm\dsktop\timeservers.reg: the specified file is not a registry script. You can only import binary registry files in the registry editor.

  the first msg not acceding, and I guess it was because I had the registry open at the same time. Anyway after that I couldn't import, just add the items in the registry manually.

  My question is, really, was performed correctly by the copy of the list of servers of time in the text, paste it into a file and you try to merge?

  Appreciate any assistance with this issue.

  Just for info:

  If you see a message similar to the following:

  Impossible to import c:\Documents and Settings\Jose\Desktop\enableit.reg: the specified file is not a registry script.
  You can only import binary registry files in the registry editor.

  That means either that your registry import file is missing the top line (or it's the wrong syntax):

  Windows Registry Editor Version 5.00

  or the file you are trying to import is not a valid registry import file.

• Error 1606 could not access network location in Windows Vista

  I have a Windows Vista Home Premium laptop and receive an Error 1606. Could access the location %APPDATA%\ network  Can someone help me with this problem?  I downloaded fixit and that has not worked. Nothing seems to work.  I do not understand the thread on this issue from the past.

  > I downloaded fixit and who did not

  You use this difficulty?
  http://support.Microsoft.com/kb/886549

  In addition there a "difficulty It for me" request, it also has an instructions "I'll fix it myself.

• Error 1606. Could not access the location network 0. during the installation of 2013 Wisconsin State tax return.

  Windows 8 - PC

  HP Envy m6

  This error occurs when I try to install (restore) my Wisconsin State 2013 by HR Blocktax return.

  • Clean the registry.
  • Disabled Windows Defender briefly.
  • Clean boot today.
  • Approximately 45 minute online chat with block of HR who instructed me to clean the boot.

  This error message occurs every time I have something new to try to help the problem. Oh, ended up buying PC Cleaner Pro to clean the registry and not only did - she did not help, they don't respond to emails through their contact page.

  Help, please!

  Hi Kathleen,.

  To better understand the issue, let me know if you face any problem during the installation of other programs?

  I appreciate your efforts to solve this problem. This problem could occur due to damaged user account or damaged registry keys.

  Try the steps listed here and see if it helps.

  Method 1:
  I suggest you run the fixit who will repair the issues that block program installation or removal because of corrupted registry keys.

  The problems that the programs cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:
  If the problem persists, we will check whether the product is on a new user account (Administrator).

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• "Error 1606. Could not access the location network O."

  Microsoft KB 886549 does not resolve this issue.

  Problem solved.  Windows Installer Clean Up correctly deleted the H & R Block - entry KS State.

• Why do I get the error Code: Ox80240016 (could not install the updates of Windows Defender)

  Family XP Edition using

  0 x 80240016 operation WU_E_INSTALL_NOT_ALLOWED tried to install while another is in progress or the system was waiting for a mandatory reboot.

  Please try to restart your machine and new updates.

  You can also try the steps outlined in this article:

  957307 error message when you try to install updates from the Windows Update The web site or on the Microsoft Update Web site: ""0 x 80240016 " "

  http://support.microsoft.com/default.aspx?scid=kb; EN-US; 957307>

  UTC/GMT is 22:54 Sunday, August 28, 2011

• I can't uninstall the old Java version 6 update 29. I get a "error code 1606: could not locate the directory."

  I am running Windows XP SP3, I can't uninstall the old java version 6 update 29, I get a "error code 1606: could not locate the directory... fatal error" How can I remove the old version of java?  I tried to uninstall regedit.exe, javaRa and windows unsuccessfully capability.  I uninstalled java, deleted the program file, but the version 6 29 poster update still in the program directory.  Help, please!

  original title: uninstall older versions of Java
  Hello
   
  Method 1:
  Check out the link and follow the steps.
   
  After uninstalling Java, how to remove its entry in the windows?
  http://www.Java.com/en/download/help/regkey_addremove.XML
   
  Method 2:
   
  See the article and follow the steps.
   
  Error message when you install a program: "Error 1606. Could not access the network location. "All the users\ directory '
  http://support.Microsoft.com/kb/315352
   
   
  Method 3:
  Check out the link and follow the steps.
  
  Download errors: 1305, 2755, 1606, etc..
  http://www.Java.com/en/download/help/error_installshield.XML
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

• Could not start the time service windows on the local computer 2 error

  Cannot update the system clock of time Internet.

  After double click to display the time in the taskbar, the Date and time properties window appears.

  Then I time tab-click Internet, and then click Update now - this produces the following message...
  "Year error occurred getting the status of the last synchronization." The RPC server is unavailable ".
  Then I clicked on start > Control Panel > Administrative Services > Services > time Windows
  I click Start the service and get the following message...
  "Could not start the time service windows on local computer."
  "error 2: the system cannot find the file specified."
  Help!  What now?

  Hello

  Glad to know that the problem has been resolved. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!

  Please help me! ....
  Audio service does not
  I tried Services.msc and tried starting windows Audio...
  The following error has come!
  Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!
  There is a sign of X in the audio icon...
  and when I click on this audio icon... TROUBLESHOOTER OPENS...
  all this happened all of a sudden!
  Please help me!
  Thank you.
  Nischal Sp

  Please provide the error screenshot more better assitance. Also, try this:

  Try to copy and merge the audio from another Windows 8 or better service.

  You can do this by going to the Registry Editor (make sure that the other computer is also a 32-bit system)

  Go to HKLM/system/current control set/services/audiosrv click audiosrv and then on the file menu, select export and save the file to a USB key or drive.

  While copy on your machine and merge. Then restart your system.

  Otherwise reset Windows 8:

  http://www.kapilarya.com/how-to-reset-Windows-8

  Good luck once again :)

• Whenever I try to install and update creative cloud, he's going to halfway and stop the download says "Setup could not access the critical file (error code46).

  Whenever I try to install and update creative cloud, he's going to halfway and stop the download says "Setup could not access the critical file (error code46).

  Hello

  Please refer to the instructions mentioned in the link below, it should help:

  Cannot install Creative cloud installation - error code 46

  "Setup could not access a critical file. Please try to reinstall. (error code: 46) »

  Stop creating cloud download

  Let us know if this was helpful.

  Kind regards

  Bani

• Error 1606. Could not access network location by default.

  Anyone know what this error message 'Error 1606 could not be accessed by default network location', or how to fix it?
  Yes, I know that it is almost the same as http://support.microsoft.com/kb/886549 but this difficulty does not work.

  The newspaper msi shows this when I hit retry:
  Error 1606. Could not access network location by default.
  Error 1606. Could not access network location by default.
  = Logging stopped: 06/02/2012 18:53:30 =.

  1. have you tried all of the methods in this article steps: http://support.microsoft.com/kb/886549

  2. have you made any changes on your computer before this problem occurred?

  3. When you receive this error message?

  4. you install any application?

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  Follow these steps and check.

  The Troubleshooting Manual in the link above steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. click Startand then click run.
  (b) in the Open box, type regeditand then click OK.
  c. look for, and then click the following registry key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
  (If the command is missing, you can add a command)

  d. in the right pane of the registry editor, double-click common administrative tools.
  e. in the value data box, type the following line, and then click OK:
  %ALLUSERSPROFILE%\Start Menu\Programs\Administrative of Directors
  f. on the file menu, click Exit to quit the registry editor.
  g. restart the computer.

  Thank you

• Error message saying "error 2738. Could not access VBScript Runtime for custom action'.

  I am trying to download the software Sky Player and get an error message saying "error 2738. Could not access VBScript Runtime for custom action'.  I have contacted sky and went through the procedure, they have recommended, but nothing helped.  Can anyone help please.

  Here is an article on this exact error message that can help solve the problem:http://www.jakeludington.com/windows_7/20091115_error_2738_could_not_access_vbscript_run_time_for_custom_action.html.

  Here is another article which basically says the same thing, although procedures vary slightly:http://www.nitropdf.com/kb/article.aspx?id=10106&cNode=3D8W4P.

  I hope this helps.  Keep me posted.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Get codes error like "error 80070005" or "could not access network location" or "internal error" when you try to open Acrobat or itunes or access some Web sites.

  I am doing various codes "error 80070005" or "could not access network location" or "internal error" when trying to access acrobat or itunes or some Web sites or that he was trying to perform certain actions such as uninstalling programs.  Here are some of the problems.  A couple of weeks everything worked very well, now there's something blocking me and it's extremely frustrating.

  Hello

  Make sure that you are logged on as administrator.

  Don't forget to check the antivirus product issues and security as a 3rd party firewall (Comodo, on the one hand, a
  has been known to cause this problem.

  It is a very difficult to solve.

  Products of security/antivirus/antispyware are a known cause, so you can turn them off like
  as the test (and that sometimes not really totally removes their influence).

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222

  The problem here is slightly different, although the solution may be the same.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000.
  Windows XP and Windows Server 2003: 0 x 80070005
  http://support.Microsoft.com/kb/968003/

  It is usually a permissions problem:

  Please check this link and those that he sites.

  Work your way through my 3 posts here.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/200f5140-c2dd-48a5-8CDB-0d8c82ade3cf

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Could not access the value of the component off ValueChangeListener

  In many cases, I need to use the value of some UIComponent during execution in many places in the application. But the problem is that I could not access the value of the component outside the ValueChangeListener of this component. I tried to store this value in a temporary local variable, I also tried to use the opportunity to link , but it did not work.

  This thread changes made on the ValueChangeListener can't think where else
  

  said I should go ahead everything in the ValueChangeListener but is not useful in my case and it's really limit my choice later.

  So question is: How to access the value of the element external ValueChangeListener?

  I use Jdeveloper with ADF 11.1.2.3 technology

  Hello

  You can create a bean (depending on the application, choose the scope), add a variable with accessors and then use it in the 'value' property of the component.

  Arun-