ORA: getPreference in an xslt file to transform the activity as input.

Similar Questions

• File name of the active document

  Hello friends,

  Now that I managed to find quotes (special strings) in paragraphs, notes, tables and table notes - all with your generous help - I need to know the name of the file (path) of the current document (or book).

  All I've found is how to get the name of an element of the book file (finally that I need too, but later).

  How can I find the file name of the active document (which is not part of a book) and

  How can I find the file name of the current book?

  Thanks again for your help

  Klaus

  Friends,

  Suddenly, I found the answer (research in the reference of the oject for 'Filename' rather than 'file name' - 'path' in the FDK reference):

  alert ("Now processing book\n"+ app.ActiveBook.Name);
  alert ("Now processing document\n"+ app.ActiveDoc.Name);
  

• Registering a dll file to start the service HID Input Device

  Hello

  I would like to register the dll located in my System32 hidserv.dll. However, when you enter the command 'regsvr32 hidserv.dll' I have an error message indicating that: "hidserv.dll was loaded, but the DllRegisterServer entry point was not found. This file cannot be saved. "

  How I then save it, knowing that I checked that this file is not corrupt?

  I need to register this dll in order to start the "HID Input Device" who stubbornly refuses to start despite an integrity check in the registry.

  The system event viewer specifies that:

  "HID Input Service service terminated with the error:
  Error 126: The specified module is not found. "

  I already tried to extract hidserv.dll, mouclass.sys & mouhid.sys sp2 and sp3 even to put them in the C:\Windows\System32 directory, but I had no change.

  The files I have place in my SYSTEM32 have the following version:
  Hidserv.dll: 5.1.2600.5512
  Mouclass.sys: 5.1.2600.5512
  mouhid.sys: 5.1.2600.0

  but the service still does not start even after rebooting. The 126 error continues. Is there other files to extract / expansion?

  I checked the integrity of all stakeholders key in the registry (for example, to have the "ServiceDll" key whose value is "% systemroot%\System32\hidserv.dll" in the settings of the service HIDserv ControlSets), but nothing more.

  I give you an export of the current CS:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ]
  "DependOnService" = hex (7): 52, 00, 70, 00, 63, 00, 53, 00, 73, 00, 00, 00, 00, 00
  "Description"="allows generic inbound access to the user interface devices, which activate and maintain the use of the active buttons preset on the keyboard, remote controls, and other multimedia devices. If this service is stopped, the normal controlled active buttons not of will operate this service don't. If this service is disabled, any services dependent on explicitly will not start. »
  "DisplayName"="HIDDEN Service entry.
  "ErrorControl" = DWORD: 00000001
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  "LocalSystem ObjectName"=""
  "Start" =: 00000002
  'Type' = dword:00000020

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" = hex (2): 20, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Enum]
  "0" = "Root\\LEGACY_HIDSERV\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  By analyzing the Observer newspaper of events more deeply, I could identify the date on which took place the first concern. The problem is dated, 18/08/2010 at 11:59:17 (it sticks with the conclusion of the first concern of losing control of my volume on my Logitech G110 keyboard also control buttons). I don't remember having a particular to this date on my system change, except perhaps a Windows Update automatically.
  I could not try a system restore, knowing that the RP oldest I have is dated 20/08, so downstream of the original problem.

  I ran a File Checker sfc/scannow system with my Windows XP Pro SP3 (current version of my system) installation cd. I've been thinking about it since a cd to install Windows XP Pro SP2, but better is worth twice more than once. I also realized a CheckDisk, but these two operations have not changed the problem.

  You will find export of address following my diary of events on the system.

  I have completed all of the tasks (start, replacement dll, see registry, SFC,...) while logged on sessions 'standard user', 'administrator' and even as a 'SYSTEM' (NT Authority), but in none of these configurations, it was possible for me to start this service. If I come to you, is precisely to avoid passing through a repair using the cd which would have made me lose a lot of time. I don't usually do the use of support services, in general the case has already been handled and the response or similar cases are on the web. But now I feel like in front of a technical impasse. I appeal to your specific skills to do what is necessary for good service restarting without using a remedy that eventually a reinstallation of the system.

  It you want to check my configuration, you can find it here.
  If you need more information, feel free to contact me. I would be happy to answer them.

  Until then, thank you very much. Kind regards.

  Arnaud TIERANT.

  First of all, the hidserv.dll is not a DLL that can be recorded.  You can try all day long, but it will not be because he is not on the list of DLLs that will be or must be registered.  There is a list, and which is not on it.  (well thought of).

  Your problem is in the registry with the HidServ, section ServiceDLL parameter.

  You have a space left in the key ServiceDLL.  In regedit, it should look like this:

  %SystemRoot%\System32\hidserv.dll

  Yours probably looks like this in regedit:

  %SystemRoot%\System32\hidserv.dll

  See the space left?  I don't know how it got that way (perhaps something that was installed for these humans), but I know that if I put a space in front of me and restart my system, HID service not start and give me an error 126 as you describe.  He has no idea about the problem in the log events.

  With space on the left, the specified module really not found because there is no such thing as the path (with the space to the left).

  Your registry export reveals this problem.

  Yours looks like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 20, 00, 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  It should look like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  In your, you can see I have stuff in bold print on the front of the chain: 20.00...  In hexadecimal, is a space and a null value (null value is correct).  You must use regedit to get rid of this leading space (20 hex), and don't forget that, in the settings section, the first character of the value ServiceDLL is the % sign (which is a hexagon of 25).

  You can, of course, just change the string, delete everything that is there, and retype the value if it looks like this without spaces attack/crawling:

  %SystemRoot%\System32\hidserv.dll

  The HID Service will not start if you come to make the changes and try to start the service.  After making your changes, you need to restart, you can check it out, and then start the service HID.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• XML file does not appear if it is a local file and XSLT file is on a server.

  If I have a local XML file with a XSLT file local XML file is displayed as expected. If the two files are on my server again that the XML file is displayed correctly. However if the XML file is local and the XSLT file is on the server (and the XML file points to the file on the server) I get the following error:

  Error loading stylesheet: an unknown error occurred (805303f4)

  Using Firefox on a Mac 41.0.1.

  This problem does not occur on Safari

  No idea where I'm wrong? Research on the web there are suggestions about changing the mime, but'm not 100% sure what to do about it. In

  Thank you

  Brian

  Guigs. Thanks for the information.

  After doing some digging, I found this page:

   http://enable-cors.org/server_apache.html
  

  Following these tips, I added an .htaccess file in the directory on the server that contains my .xslt file, which contains the line:

     Header set Access-Control-Allow-Origin "*"
  

  And that seems to have solved my problem for Firefox!

  Does not seem to solve the problem on Internet Explorer, but suspect it's a problem for another day (and maybe another forum).

• IAM get AC-00013: error generating file context after the database upgrade from 10 g to 11 g

  Perl adbldxml.pl level = appsuser = apps appspass = XXXX template=/backup/EIGC/eigcdb/11.2.0/appsutil/template out=/oracle/PROD/proddb/11.2.0/appsutil/ servername = ebsapps db

  From generation of context for db level files...

  Using /backup/EIGC/eigcdb/11.2.0/jdk/bin/java JVM to run java programs...

  The log file for this session adbldxml is located at:

  /Backup/EIGC/eigcdb/11.2.0/appsutil/log/adbldxml_05310924.log

  AC-00013: error: file: /backup/EIGC/eigcdb/11.2.0/network/admin/EIGC_ebsapps/listener.ora is not a valid file, such as the SID database could not be found for connection string: EIGC

  Cannot connect to the database with the settings above, please answer the Questions below

  Dear Yaanos,

  Thank you for your fast & immediate action plan solve the problem.

  Kind regards

  Anand

• can I delete files from the activity monitor application

  I have a soft [TrendMicro security] that runs automatically on my mac OS El Capitan.

  It would be great if it worked with the new OS of El captain - it doesn't.

  I see the files running on the activity monitor, but I can't find the files even in Hidden Application Support as it says they are?

  Any suggestions on how to permanently delete this application and its files.

  Thanks for any help, you can share with me.

  PD

  In the preferences system-> users and groups, check your login items. Remove the application from there.

• How to get the file name of the current active document in InDesign CS4?

  Hello

  If I open a document in the file-> open, I can get the file name of the document using IOpenedFileInfo-> GetOpenedFilePath().

  But, if I create a new document and run the file-> save as, GetOpenedFilePath is invalid back reference IdFichier.

  What is the right way to get the file name of the active document?

  Thank you

  VSP

  You can try this:

  IDatabse * db =: GetDatabase (theDoc);

  IdFichier * SYSIXCOL = db-> GetSysFile();

  PMString docName is SYSIXCOL-> GetFileName();.

  Good luck

• ORA-19625: error identification of file

  Hi all;

  SYS > select name, database_role, protection_mode from v$ database;

  NAME DATABASE_ROLE PROTECTION_MODE

  --------- ---------------- --------------------

  PERFORMANCE MAXIMUM STANDBY PHYSICS CRMS

  SYS > select max(sequence#) from v$ log_history;

  MAX(SEQUENCE#)

  --------------

  14424

  SYS > list of archive logs;

  Database log mode Archive Mode

  Active AutoArchive

  Destination of archive USE_DB_RECOVERY_FILE_DEST

  Sequence of journal online oldest 14427

  Log sequence to archive 0

  Current log sequence 14428

  > > I got some error at the time of replication messages.  (errros are from alert.log to waiting for database)

  Physical Standby Database mounted.

  Lost write protect mode the "typical" value

  Errors in the /u02/app/oracle/diag/rdbms/stbycrms/stbycrms/trace/stbycrms_lgwr_5064.trc file:

  ORA-00313: open failed for members of the Journal 4 of the thread group 0

  ORA-00312: threads of journal online 4 0: ' / u03/app/oracle/oradata/REDOLOG/stbycrms/stby_redo4.log'

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  Errors in the /u02/app/oracle/diag/rdbms/stbycrms/stbycrms/trace/stbycrms_lgwr_5064.trc file:

  ORA-00313: open failed for members of the Journal 4 of the thread group 0

  ORA-00312: threads of journal online 4 0: ' / u03/app/oracle/oradata/REDOLOG/stbycrms/stby_redo4.log'

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  Errors in the /u02/app/oracle/diag/rdbms/stbycrms/stbycrms/trace/stbycrms_lgwr_5064.trc file:

  ORA-00313: open failed for the members of the newspaper group 5 of the thread 0

  ORA-00312: threads of journal online 5 0: ' / u03/app/oracle/oradata/REDOLOG/stbycrms/stby_redo5.log'

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  ..

  ...

  Completed: alter database mount standby

  Fri 30 Oct 23:08:35 2015

  RMAN DUPLICATE: Errors in krbm_getDupCopy

  Errors in the /u02/app/oracle/diag/rdbms/stbycrms/stbycrms/trace/stbycrms_ora_5140.trc file:

  ORA-19625: error identification of file /u02/app/oracle/oradata/stbycrms/system01.dbf

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  RMAN DUPLICATE: Errors in krbm_getDupCopy

  Errors in the /u02/app/oracle/diag/rdbms/stbycrms/stbycrms/trace/stbycrms_ora_5140.trc file:

  ORA-19625: error identification of file /u02/app/oracle/oradata/stbycrms/sysaux01.dbf

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  RMAN DUPLICATE: Errors in krbm_getDupCopy

  Errors in the /u02/app/oracle/diag/rdbms/stbycrms/stbycrms/trace/stbycrms_ora_5140.trc file:

  ORA-19625: error identification of file /u02/app/oracle/oradata/stbycrms/users01.dbf

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  11.2.0.1 on redhat

  It seems that two copies has been tried or done more than once and on the second time, he threw the "Krbm_getDupCopy" (which made me think see the stop).

  So if you ever have to re-create the day before do not delete files on the standby is the lesson.

  OR

  You have the error because RMAN checks the files on the two copies of 11.2 on.  (This is probably what happened)

  Thank you! I learned something new!

  See

  RMAN DUPLICATE: Errors in Krbm_getDupCopy found in the alert.log (Doc ID 1476641.1)

  Best regards

  mseberg

• ORA-19838: cannot use this control file to open the database

  Dear all,

  While making RMAN cloning, we are facing problem,

  SQL > alter database open resetlogs;

  ALTER database open resetlogs

  *

  ERROR on line 1:

  ORA-19838: cannot use this control file to open the database

  Concerning

  Villi Kumar

  Dear all,

  While checking the database,

  Control the name of the database file is PROD

  In the instance, database name is TEST.

  So we took the PROD and edited control file trace file based on the TEST environment.

  Then run the script published in the TEST database trace file.

  Now we can open the database by using below command

  ALTER database open resetlogs;

  Concerning

  Villi Kumar

• ORA-19809: limit exceeded for file recovery

  Hello

  Following maintenance on our server (battery replacement raid + restart) my database (Oracle 11 g) is no longer available. I m a newbie in Oracle and I've been through the forum and I can t find the solution to my pb, I can fix the error ORA-19809 t since I can t connect to the DB as sysdba, everything I found the solution needs to be connected in sysdba. Please help I have struggled on this for days and I seem to go in the circle at the moment. Here's what I have:

  C:\ > set oracle_sid = APPLICATION

  C:\ > sqlplus/nolog

  SQL > connect / as sysdba

  ERROR ORA-12560: TNS:protocol adapter error

  
  

  Here are the mistakes I have in my c:/oracle/diag/rdbms/mytikka/mytikka/trace/alert_mytikka.log:

  Errors in the c:\oracle\diag\rdbms\mytikka\mytikka\trace\mytikka_arc1_6420.trc file:

  ORA-19809: limit exceeded for file recovery

  ORA-19804: cannot recover 30839808 bytes of limit 10485760000 disk space

  Arc1: 19809 error creating archive log file to ' C:\ORACLE\FLASH_RECOVERY_AREA\MYTIKKA\ARCHIVELOG\2015_03_31\O1_MF_1_88141_%U_. ARC'

  Errors in the c:\oracle\diag\rdbms\mytikka\mytikka\trace\mytikka_ora_7524.trc file:

  ORA-19815: WARNING: 10485760000 bytes db_recovery_file_dest_size is 99.86% used and 14655488 remaining bytes available.

  ************************************************************************

  You have choice to free up space in the recovery area:

  1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard

  then consider changing POLICY of DELETE ARCHIVELOG RMAN.

  2 back up files on a tertiary device such as a tape with RMAN

  SAFEGUARDING RECOVERY AREA command.

  3. Add space drive and increase the db_recovery_file_dest_size setting to

  reflect the new space.

  4 remove the unnecessary files using the RMAN DELETE command. If a service

  the system control has been used to remove the files, and then use the RMAN DUPLICATION and

  Commands DELETE has EXPIRED.

  ************************************************************************

  Errors in the c:\oracle\diag\rdbms\mytikka\mytikka\trace\mytikka_ora_7524.trc file:

  ORA-19809: limit exceeded for file recovery

  ORA-19804: cannot recover 30839808 bytes of limit 10485760000 disk space

  ARCH: 19809 error creating archive log file to ' C:\ORACLE\FLASH_RECOVERY_AREA\MYTIKKA\ARCHIVELOG\2015_03_31\O1_MF_1_88141_%U_. ARC'

  Errors in the c:\oracle\diag\rdbms\mytikka\mytikka\trace\mytikka_ora_7524.trc file:

  ORA-16038: log 1 # 88141 sequence can be archived

  ORA-19809: limit exceeded for file recovery

  ORA-00312: thread 1 1 online journal: ' C:\ORACLE\ORADATA\MYTIKKA\REDO01. JOURNAL"

  USER (ospid: 7524): put an end to litigation because of the error 16038

  Kill Mar 31 16:08:06 2015

  ARC3 started with pid = 23, OS id = 8104

  Instance of stopped by USER, pid = 7524

  TNSPING seems to work
  

  C:\ > tnsping application
  

  AMT Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 01-APR-2

  015 02:32:14

  Copyright (c) 1997, 2010, Oracle.  All rights reserved.

  Use settings files:

  C:\oracle\product\11.2.0\dbhome_1\network\admin\sqlnet.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 420025-w

  EB1) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = application)

  ))

  OK (0 msec)

  C:\ > lsnrctl status

  
  

  LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production April 1, 2015 02:35 :21

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 420025-web1)(PORT=1521))

  )

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  TNSLSNR for Windows 64-bit version: Version 11.2.0.1.0 - Prod

  ction

  Start date March 31, 2015 16:08:17

  Uptime 0 days 10 h 27 min 4 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Listener parameter File C:\oracle\product\11.2.0\dbhome_1\network\admin\listen

  ER.ora

  Listener c:\oracle\diag\tnslsnr\420025-web1\listener\alert\log log file.

  XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = 420025-web1)(PORT=1521)))

  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))

  The listener supports no services

  The command completed successfully

  Here are my tnsnames.ora:

  tnsnames.ora # Network Configuration file: C:\oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora

  # Generated by Oracle configuration tools.

  APPLICATION =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 420025-web1)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = application)

  )

  )

  TSAPIDB =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 420025-web1)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = application)

  )

  )

  It can be a lot of problems (or pb)

  the server hosts multiple instances?

  of the right services.msc on that OracleService, properties and see what oracle_home it runs

  c:\oracle\product\... or that each path, it can

  computer management, make sure that the user logged in to the server, is also in the ora_dba group

  computer management / configuration / local users and groups / groups

  then from the cmd prompt:

  set oracle_home = whatever_path_you_found

  set path=%oracle_home%\bin;%path%

  Set oracle_sid = APPLICATION

  sqlplus / as sysdba

  REM > if you know the password for sys, try also

  sqlplus sys/password as sysdba

  check the value NTS sqlnet.ora

  http://docs.Oracle.com/CD/B28359_01/network.111/b28317/SQLNET.htm#NETRF198

  etc... etc

  Googling for ora-12514

• ORA-1511 when moving all files pending physical

  I had to reinstall all the files on my 11.2 physical standby database in a new mount point (nothing has changed on the primary).  I cancelled recovery managed on the standby and sleep mode off and then copied the data files controlfile, ORLs and SRls to their new location.  After that, I set up the night before, set standby_file_management = MANUAL and did an "alter database rename file' for all the files. However, I have seen this error on several occasions for all files:

  Example:

  ORA-1511 scored at the course: change the database file rename ' / g06/oradata/mydb/redo06.log' to ' / g03/oradata/mydb/redo06.

  Journal "...

  I did this:

  Select name from v$ datafile;

  Select name from v$ tempfile;

  Select Member from v$ logfile;

  All data files and tempfiles showed in the new location as well as of all litigants without lawyer and ORLs, except a single file SRL, who was always on display in its former location.  I did then:

  Select * from v$ standby_log and that a particular SRL has been ACTIVE.  I began recovery managed and dial-up logfiles on the primary.  I then stop Eve again and he started upward, and this time I was able to rename this a SRL I could not rename before (probably due to the log command).

  Why I see ORA-1511 errors even if the name change works?  Why the change of a name SRL does not work?  What is the correct way to do it?

  Also, I went from logs a lot of time on the primary, and I noticed that two of the six only litigants were always used.  They are not supposed to be not circular rotation instead of switch backwards between only two of six SRls?

  The ORA-1516 is the other message I was looking for. As indicated in this message... the log file does not exist. Or... that the message does not... it is that the Oracle is unable to see the file. Maybe it's a permissions problem?

  At this point, since the others seem ok and it's just this a SRL, why not let it drop and recreate it?

  See you soon,.

  Brian

• Comment transformer the PDF file in format WORD PLEASE?

  I bought adobe to an EXPORT PDF AND I DO KNOW NO COMMENT TRANSFORMER ONE FORMAT PDF EN FORMAT WORD:

  HE is there A NO EXPLANATION POUR USE THE SOFTWARE thank you for your help GUY

  Hi luggyguy,

  You will need to follow the steps mentioned below:

  • Connect to " https://cloud.acrobat.com/exportpdf" using your Adobe ID credentials stored.
  • After signing in, click on "Select Export PDF files" and choose the PDF file in your computer or simply drag.
  • A new window will appear in which you must choose 'Word' label 'convert '.
  • Then, you can download the converted file on your computer or locate them on the "Files" tab

  Follow these steps and let me know if still face you any issue.

  Kind regards

  Ana Maria

• ORA-20100: error: failure FND_FILE. Cannot create the file

  Hi all
  Simultaneous application of Bellow error
  
  We using ORACLE 10 g. R12
  OS: RHEL 4.4 (LINUX)
  
  
  
  
  
  ---------------------------------------------------------------------------
  Execution of the expedition: Version: 12.0.0
  
  Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
  
  Module WSHINTERFACES: Interface travel Stop - SRS
  ---------------------------------------------------------------------------
  
  Current system time is January 27, 2013 09:58:58
  
  ---------------------------------------------------------------------------
  
  * Starts * January 27, 2013 09:58:58
  Error ORACLE 20100 in FDPSTP
  
  Cause: FDPSTP failed due to the ORA-20100: error: failure FND_FILE. Cannot create the file, l0633393.tmp in the directory/usr/tmp.
  You can find more information in the applications log.
  ORA-06512: at the 'APPS '. FND_FILE', line 554
  ORA-06
  ---------------------------------------------------------------------------
  Beginning of the FND_FILE log messages
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  End of the FND_FILE log messages
  ---------------------------------------------------------------------------
  
  
  ---------------------------------------------------------------------------
  Options, AutoComplete, the request for enforcement.
  
  
  End of query options AutoComplete.
  
  ---------------------------------------------------------------------------
  Simultaneous request ended
  Current system time is January 27, 2013 09:58:58
  
  ---------------------------------------------------------------------------

  This issue is related to the Oracle EBS, mark it as here the answer and open it

  Oracle Discussion forums' E-Business Suite

• For each does not properly in the XSLT file to two loops on a single node

  Hi all
  
  I'm transforming 2 inputs to a single target using XSLT. Both of the target entry of the same pattern and have the child element.
  In the XSLT, I gave this condition.
  "< xsl: for each select="$Variable1.payload/ns1:BookStore/ns1:Books ">
  < xsl: for-each select = "/ ns1:BookStore / ns1:Books" >
  "< xsl: if test="$Variable1.payload/ns1:BookStore/ns1:Books/ns3:BookId = ns3:Books / ns3:BookId ">
  
  My second for each does not work and in the target, I'm getting double elements. Help, please. Here are two xml source and xml desired target.
  1 XML source:
  
  < bookStore >
  < book >
  Name1 < name > < / name >
  author1 < author > < / author >
  < ID > 1 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < book >
  name2 < name > < / name >
  Author2 < author > < / author >
  < ID > 2 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < book >
  < name > NAME3 < / name >
  author of 3 < author > < / author >
  < ID > 3 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < / book >
  
  XML source 2:
  
  < bookStore >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 1 < / BookId >
  < price > 100 < / price >
  < status > < / status >
  < book >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 2 < / BookId >
  < price > 200 < / price >
  < status > NA < / status >
  < book >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 3 < / BookId >
  < price > 300 < / price >
  < status > < / status >
  < book >
  < / book >
  
  Desired target XML:
  
  < bookStore >
  < book >
  Name1 < name > < / name >
  author1 < author > < / author >
  < ID > 1 < / BookId >
  < quantity > 2 < / quantity >
  < price > 100 < / price >
  < status > < / status >
  < book >
  < book >
  name2 < name > < / name >
  Author2 < author > < / author >
  < ID > 2 < / BookId >
  < quantity > 2 < / quantity >
  < price > 200 < / price >
  < status > NA < / status >
  < book >
  < book >
  < name > NAME3 < / name >
  author of 3 < author > < / author >
  < ID > 3 < / BookId >
  < quantity > 2 < / quantity >
  < price > 300 < / price >
  < status > < / status >
  < book >
  < / book >
  
  Thank you

  Hello

  It will not work like that... To do something like the following... Only one for each...

  
    
    
      ns1:Name
      ns1:Author
      ns1:BookId
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Quantity
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Price
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Status
    
  
  

  I don't have to check the syntax, but you get the idea...

  I hope this helps...

  See you soon,.
  Vlad

• ORA-01144: (4194304 blocks) file size exceeds the maximum of 4194303 blocks

  Hi all
  
  Wen I try to add the new tablespace datafile(32GB) I found the below error. I have space in my drive, why I'm not able to add the new data file to the tablespace?
  
  ERROR on line 1:
  ORA-01144: (4194304 blocks) file size exceeds the maximum of 4194303 blocks
  
  Here's my db_block_size information:
  
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  Whole DB_BLOCK_SIZE 8192
  
  
  How can I add new datafile with on all issues.
  
  
  Kind regards
  RHK

  OERR ora 1144
  01144, 00000, "file size (blocks of %s) exceeds the maximum of %s blocks.
  * Cause: Specified file size is greater than the value of the maximum allowed size.

  ORA-01144: (4194304 blocks) file size exceeds the maximum of 4194303 blocks

  just a differece block, so reduce the size of the file you add and issue new cmd, make 30 GB.