Oracle 10g R2 ASM Config
Hi allI get the error when the conf of ASM.
My env is (RHEL4.0, Oracle 10 g 2),
I installed the RPM of ASM support as well as libs ASM, while creating the ASM drive show
---.init.d#./oracleasm createdisk vol1/dev/hda3
It gives an error
-* marking "vol1' as a [FAILED] ASM disk drive *.
What is the reason let me know.
user603328 wrote:
I installed respective RPM what your mentioned.
I created disks successfully
by #/etc/init.d/oracleasm createdisk DG/dev/hdb1
Successful DG
#/etc/init.d/oracleasm createdisk DG/dev/hdd1
Successful Dg1.
#/etc/init.d/oracleasm listdisks
DG
CGV
It shows.
can I use DBCA for ASM conf but it is impossible to recognize the devices.
But I am unable to go forward.
Please let me know what is the reason.
I think if you created these disk groups using oraclesm (asmlib), then you need to configure
asm_diskstring = "" / dev/oracleasm/discs / * ' init parameter, and then try again. " DBCA you can't see these candidate disks because the ASM instance cannot discover this, provide this (using asm_diskstring = "/ dev/oracleasm/discs / *") and try again
Tags: Database
Similar Questions
-
Unable to synchronize the data file in dataguard oracle 10g R2 ASM
Hello
I use datagurd for my personal PC (vmware), OS-Solaris 10 x 86, DB-oracle 10 g 2.
I use a database db_name = test & db_uniq_name = test (primary) and db_unique_name = test2 (standby) standby
In the test instance, I have two diskgroup in ASM (Davis, HISTDG) and for test2 two more starts: (DBDG1 & HISTDG1).
Prob: Now when I create a tablespace to Davis (test instance) same thing happens again immediately in test2 (DBDG1) but when I create tablespace in diskgroup HISTDG of the test instance in the same is not get copied to HISTDG1 test2 pending . Even is immediately reproduce at DBDG1(test2 instance) but not HISTDG1 diskgroup
Appreciated for the answer.
Thank you
Published by: user11217569 on March 19, 2013 12:18 AMHello
Set DB_FILE_CREATE_DEST = "
as it can be null and is not really necessary
I then use db_file_name_convert setting as you had originally.
I hope this will solve your problemfor example
Set DB_FILE_NAME_CONVERT = '+ DELAFLOR', '+ DBDG1', '+ HISTDG', '+ HISTDG1 '.
and
whole set DB_FILE_CREATE_DEST = "
or if you use a file pfile deletes the line with DB_FILE_CREATE_DESTCliff nel
Published by: cliff64 on March 19, 2013 11:00
-
Oracle 10g RAC + ASM + Data Guard: Question on the new disk group.
Hello
One of our clients is to have Oracle 10 g RAC + ASM + Data Guard. Database is the disk DATA_DG1 group and FRA is on FLASH_DG1. Data Guard is a single instance on ASM.
To add more space, we can create another disc of the Group DATA_DG2 on Prod ASM and Data Guard ASM env, replication continues without any problem. Will be archiving logs shipped to the second disk DATA_DG2 group and applied without any configuration changes?
Rgds,Yes, it sounds great.
You should be fine with the implementation of these measures and the dataguard should continue on as usual.
Just make sure that you are dealing with a physical standby that has not the conerts file name defined.
-
Hello Sir: I use a generator of form of oracle 10g and I want to search on two dates using between.how it is possible.
I guess its text fields are the date data type.
-
Oracle 10g of MSSQL 2005 database link
Hello
We are configuration link database to oracle 10g of mssql 2005
Thanks to the heterogeneous connectivity. We get the following error when testing database link.
ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
ORA-28541: error in the HS on line 1 init file.
ORA-02063: preceding 2 lines of < SID >
28500 00000 - "connection between ORACLE and a non-Oracle system has sent this message:
* Cause: The cause is explained in the forwarded message.
* Action: See documentation for the non-Oracle of the transmission system
Message.
Error on line: column 4:19
Can someone guide correct configeration of Hetrogeneous Service and why the error arises.
Thank you
Basu,
Dg4ODBC gateway can be used with the 10.2.0.5 database. It is certified and no additional license is required for the database to ODBC gateway - the license is included in the license database (even when the Oracle database is still version 10.2) AND you can also install Dg4ODBC on another machine, then the Oracle database. There is no need to have Dg4ODBC installed on the same computer as the Oracle database.
-When you install DG4ODBC on the same machine as your Oracle 10.2 database, then install in its own, separate OH - otherwise you will corrupt your existing installation of the database.
-Klaus
Post edited by: kgronau
-
Is there a way to fill the boss way recursive/dynamically in oracle 10g
Hello
I want to complete the following template and then use the result as a virtual table in oracle 10g.
SELECT 2 FROM DUAL;
UNION ALL
4. SELECT FROM DUAL;
ALL UNIONL
8. SELECT FROM DUAL;
.
.
.
.
UNION ALL
. SELECT POWER (2.61) FROM DUAL;
Is it possible that I can use the recursion or dynamic query with "with clause" and avoid writing all these statements.
Thank you
YG
Hi GY,.
In 10g, you can use a clause of the TYPE:
SELECT nbr
OF THE DOUBLE
MODEL
DIMENSION (2 d)
MEASURES (number 0)
RULES ITERATE (61)
(nbr [ITERATION_NUMBER] = power (2, ITERATION_NUMBER + 1))
ORDER BY nbr;
From 11 g 2, you can use a WITH recursive clause:
WITH v (n, lvl) AS (SELECT 2 n, 1 lvl FROM DUAL
UNION ALL
SELECT 2 * n, 1 + lvl
V
WHERE the lvl<=>=>
)
Select n v
-
Oracle 10g with 10.2.0.5 patch app thin?
Hello
I'm working on creating a fine app for oracle 10g. I am able to create the thin application without patch and everything seems to work normally, but in our situation, we must apply the 10.2.0.5 patch. When I patch the program, everything still seems to work ok, so I'm going through with the postscan, which also seems to work fine until there finishes.
I don't know if this is related, but I get the following warnings after the postscan:
Could not copy the file--> C:\Program Files (x 86) C:\ProgramData\Microsoft\RAC\StateData\RacMetaData.dat \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%Common AppData%\Microsoft\RAC\StateData\RacMetaData.dat
Could not copy the file--> C:\Program Files (x 86) C:\ProgramData\Microsoft\RAC\StateData\RacWmiEventData.dat \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%Common AppData%\Microsoft\RAC\StateData\RacWmiEventData.dat
Could not copy the file--> C:\Program Files (x 86) C:\ProgramData\Microsoft\Search\Data\Applications\Windows\MSStmp.log \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%Common AppData%\Microsoft\Search\Data\Applications\Windows\MSStmp.log
Could not copy the file C:\Users\All Users\Microsoft\RAC\StateData\RacMetaData.dat--> C:\Program Files (x 86) \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\RAC\StateData\RacMetaData.dat
Could not copy the file C:\Users\All Users\Microsoft\RAC\StateData\RacWmiEventData.dat--> C:\Program Files (x 86) \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\RAC\StateData\RacWmiEventData.dat
Could not copy the file C:\Users\All Users\Microsoft\Search\Data\Applications\Windows\MSStmp.log--> C:\Program Files (x 86) \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\Search\Data\Applications\Windows\MSStmp.log
Could not copy the file C:\Users\All Users\Microsoft\Windows Defender\IMpService925A3ACA-C353 - 458 A-AC8D - A7E5EB378092.lock--> C:\Program Files (x 86) \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\Windows Defender\IMpService925A3ACA-C353 - 458 A-AC8D - A7E5EB378092.lock
Could not copy the file C:\Users\All Defender\Scans\History\CacheManager\MpSfc.bin--> C:\Program Files (x 86) Users\Microsoft\Windows \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\Windows Defender\Scans\History\CacheManager\MpSfc.binAnd then finally I get this at the end of the 'Build Project' message:
C:\Windows\hh.exe: an executable not valid
Build failed *.I can't determine why the build fails.
Any help would be appreciated.
Hi Mark
1. the warnings that you are seeing after Postscan aren't a problem, in my view, they are for most of the newspapers that were not copied to the ThinApp of your application project (probably because access is denied because some application process is running and use).
2. the error you see regarding hh.exe during the generation probably occurs because it is a 64-bit binary (and ThinApp 4.7.3 can't stand not the 64-bit binaries), in all cases, please open the file package.ini in the project folder (the folder that contains the project ThinApp registered Oracle 10 g, generated by the capture process) and find the section [hh.exe] and add 'Disabled = 1' under it , and then try again to build again by running build.bat.
Thank you.
-
not able to uninstall oracle 10g, how I uninstall oracle 10g IAM?
actually iam using oracle10g in my laptop. now I just want to change for oracle 11g. I tried to uninstall 10g it shows uninstalled successfully. but when I tried to install 11g it shows already oracle is installed on your laptop...
now how do I install 11g without formatting... can my drive you give me the solution for this...
Hello
You must uninstall oracle 10g by
1.
Oracle Universal Installer from Start menu
2.
Run regedit.exe and delete the HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE key.
This contains registry entries for all Oracle products.
3 make sure that he didn't there no service oracle left behind in the services Panel
4 restart your computer
5.
Delete the "C:\Oracle" directory, or the oracle_base directory on which you had installed oracle 10g
regards,
-DM
-
I recently upgraded from Oracle Forms/Reports 10 g and 11g. Oracle 10g reports saving as PDF is easily converted into a word document, however, Oracle 11 g converts not as 10 g. What is the difference and how to make the report of 11g saved in a PDF file be able to convert a Microsoft Word document itself.
Thank you
Steven
Hello
There is a "known issue" with the PDF file in 11g:
ALERT: Indicates problems PDF in 11.1.2.1.0 group of fixes for Non-Linux (Doc ID 1522543.1) platforms
Maybe the problem comes from this 'problem '...
"Patch Set Exception" exists for this problem.
Kind regards
-
How to send a mail in oracle 10g
I am new to oracle developer... we use oracle 10g developer... How to send messages via oracle 10 g on a click.pease button help me.
Thanks in advance
This question was asked several times on this forum, see if you get the help of the following:
https://forums.Oracle.com/message/5395438#5395438
Search results: https://forums.oracle.com/thread/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=form+email
Check this out as well:
http://nzchaudhry.WordPress.com/2013/05/31/send-report-via-email-attachment-in-Oracle-Forms-10G/
You can find the init.ora or initSID.ora file under $ORACLE_HOME/dbs on linux and Windows under $ORACLE_HOME/database. Otherwise, you can create using the command "create pfile from spfile.
Aneel
-
Urgent: db link from oracle 10g to sql server 2000
Hello
I have an oracle 10g db connection to sql server 2000. It was created a couple of years. This works.
I have now created another link db of the same oracle on the same sql server server but it does not work.
But I'm getting ORA-28500 and error IM002
. Please notify.
I can't understand what is wrong as I followed the hs odbc set up on this link db in the same way as I did 2 years ago.
Thank you
Shailaja
Just sort the problem.
Basically, I use HSODBC to connect to SQL Server from Oracle (on windows 2003 64-bit).
To do this, I need to create a connection ODBC from Oracle to SQL Server.
HSODBC is a 32-bit application and is why we use the ODBC 32-bit driver when we create the ODBC connection.
When I created the connection ODBC from Oracle to SQL Server, I used the ODBC 64-bit driver and that's why the system could not find the name of the data source.
I have now created connection ODBC from Oracle to SQL Server via the ODBC 32-bit driver and everything works fine now.
No offense to anyone, but as you all works using Oracle software, I was hoping a better answer than some of the answers above. You can say that you did not understand the question or you do not know the reason why it happened.
I have just listed how the problem was fixed so that in the future one having the same problem can benefit.
-
Is - this here is output expected between the different versions of DB?
Oracle 10g
O/Pselect utl_url.escape('http://sample.com/questions/hea[der.html') from dual;
Here characters ' [' is dropped.]http://sample.com/questions/hea%5Bder.html
Oracle 11gselect utl_url.escape('http://sample.com/questions/hea[der.html') from dual;
Here characters ' [' is no exception.]http://sample.com/questions/hea[der.html
Support UTL_URL note. ESCAPE escape is no longer some characters such as brackets [] in 11.2 [1467611.1 ID]:
>
The UTL_URL procedure. ESCAPE has been updated to 11.2 in conformity to the specification of the URL RFC 2396. The procedure only escapes illegal characters (and possibly reserved characters) using the 2%-figure-hex-code format. It appears that some legal / reserved characters (such as [and]) have also been dropped in earlier versions. -
Hello
I installed oracle 10g application server on my system. Now, I need to develop forms and reports that the tool I need to install.
Thank you.Try the Oracle Developer suite 10, http://www.oracle.com/technetwork/developer-tools/developer-suite/downloads/index.html
-
customer of oracle 10g 64 bit to win7 64-bit
where can I find it? I'm not even a link to the oracle 10g client download on otn.
I have an oracle 10g 32-bit client that I currently use on win7 64 bit OS but I need 64-bit customer oracle 10g.10g downloads are deleted from the RTO. If you want, you must get in contact with the support.
Aman...
-
When I installed oracle 10g am not able to start my application
Hi all
Using ATG 9.1 my application works fine, but after I installed oracle 10g my Jboss starts up, but I couldn't run my application?
This shows that the requested Url is not found...
Could you please tell me why this happens...
Thanks in advance...
Thank you and best regards,
Sudhakar.This happens in oracle 10g for oracle 10g is also used as the default http port 8080.
And if your application server is running on default 8080 port you ll see this problem.To solve this, all you need to do is change the port to some other port number 8080 by default oracle.
See the link below to change the port.
http://daust.blogspot.in/2006/01/XE-changing-default-HTTP-port.htmlAfter changing the port, restart your computer again and you should be able to access your application very well.
~ Yvan
Published by: Yvan November 6, 2012 01:08
Maybe you are looking for
-
I have a Pavilion a324x - 2004 - bought OS is XP home, ISP-VersionDSL - 768kb. I'm an amateur on computers. When I download a game and he asks me I want to 'run' or 'save', I click on save. OK, it is said that it is saved in a temporary folder.
-
HP ADIDAS GIFT of a VALUE of Rs 3000.00
Its been 3 weeks I sent copy of cell phone bill and the serial number [email protected], but still no acknowledgment nor scanned good. I had also send reminder emails and don't cause any response from the people of HP. I also tried to conta
-
How to find what temperature my 17TS works to envy?
How will I know what temperatures work to my computer 17.3 want? I don't see anything in the manual on the "temperature". Should I get an external software to know what my laptop works at temperature? If so, what is recommended? Knowing that the heat
-
My Acer AL2216W came with a power supply cord, who also had a box in the middle. Am I right in thinking that this monitor came with an external power supply, and then later they did internal? I lost my power cord and the monitor doesn't do anything
-
Have no sound after reformat Windows XP SP3 and updates
I had to reformat my windows XP, SP3. Everything was fine, then to halfway through microsoft dates I lost sound. It shows no drivers for sound, or I have a sound card, which is on the mother boaed. My sound and drivers is where?