Oracle 11g Installation error

Similar Questions

• Setup custom for 11g installation error

  Hello

  I try to install database utilities (SQL Loader) that the InstantClient don't have SQL loader. We need for Hyperion FDM.

  According to Hyperion, we need to install it in the same location of origin. When I chose the original location, I get error below. No idea how to install it on the same Oracle home location.

  [INS-32025] Conflicts of installation chosen with software already installed in the given Oracle home

  Someone already had this question before, but not a solution.

  How to install SQL loader

  Thank you

  Mikki

  Hello

  I was able to install successfully by using Oracle Universal Installer. It is the location of the Yes

  ORACLE_HOME/Product/11.2.0/client/oui/bin/Setup.exe

  When I did using the setup.exe in the download of the installer, is not letting me. No idea why

• Oracle Universal Installer error

  Hi all
  
  I managed to install SQL Server 2008 (64-bit) on my work server and created an Oracle in Database Management Studio Server and connected scripts it successfully. However, at the time where I had a 32-bit Client Oracle moment and trying to connect to Oracle through offers of I got an error of BadImageFormatException. I then realized that I needed a 64-bit client for my 64-bit Windows Server 2008 R2.
  
  Now, I downloaded the 64-bit client on my drive local and unzipped on the C drive of the server. However, when I click to start YES, I just get a message saying "preparing to launch Oracle Universal Installer...." »
  
  But nothing happens. Close the window MS-DOS, and that's all. Nothing. I thought that the file is a not unzip correctly so I unzipped a 32-bit client on the server and its momentum very well!
  
  Any ideas? Ideally, I want to just get Reporting SERVICES on Windows Server 64-bit, but I think without Oracle 64-bit Client this will prove fruitless.
  
  Thank you
  
  Brian

  Which version of the client you are trying to install? I'd go with 11.2.0.2 to exclude known issues with the YES program.

  11202 is available on MOS. If you have no Oracle Support for access to MOS, 11201 is available in the section downloads on OTN.

  Greg

• ODI 11g Installation Error (JDK).

  Hello
  
  I have a problem with installing ODI 11 g under Windows 7 (64-bit). I installed the 32-bit version of jdk (jdk1.7.0).
  
  When I run the setup.exe (run as administrator), Universal Oracle install starts, but must specify the path to the JDK
  
  "Preparation for the launch of Oracle Universal Installer from C:\Users\*. Please wait...
  "Please specify JDK (Ex./home/jdk), < location > location/bin/java must exist:
  
  When I entered a path like C:\Program Files (x86)\Java\jdk1.7.0\bin , it gives msg as)
  Please specify a valid JDK location:
  
  
  
  Thank you

  Hi yogesh,

  As has been pointed out by Marc, you will need to use the path to the JDK, not the JRE, when starting the installer.

  * 1. * you said your for the JDK installation path is "C:\Java\bin". The java.exe application sits within this folder?
  * 2. * Installer, change the value for the jreLoc - for example, if #1 above is true.
  D:\Work\Softwares\Odi Setup\ofm_odi_generic_11.1.1.6.0_disk1_1of2\Disk1\install\win64>setup.exe - jreLoc C:\Java\bin

  A default installation of the JDK path is C:\java\jdk1.7. In this way, the file bin\java.exe and demand exist. The jreLoc - wants you to provide the path of C:\java\jdk1.7. I can't tell where the java.exe application based on the information provided, but you get the idea.

  Kind regards
  Michael Rainey

• IDM 11g Installation error

  Hello
  I tried to install Identity Management 11g as part of our test of Fusion Middleware environment, but I could not do through the Installation.
  
  I want to install IDM 11 g, just Oracle Internet Directory with directory, Oracle, Oracle Directory Services Manager and Fusion Middleware integration platform control in a new Administration of WebLogic domain (do not select Federation identity or virtual directory)
  
  All prerequisites are met, any verification passed.
  
  I use Weblogic 11 g (10.3.1), all on an OEL 5.2.
  
  The error I get is at the stage of the progress of the Configuration in the configuration of Bootstrap area section and in the Create Domain part.
  
  The logs show:
  oracle.as.provisioning.util.ConfigException:
  Error creating u01/oracle/app/wl_10.3/user_projects/domains/IDMDomain domain.
  Cause:
  An error of WLST.
  Action:
  Check the logs for more details.
  at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
  at oracle.as.provisioning.weblogic.ASDomain._createDomain(ASDomain.java:2864)
  at oracle.as.provisioning.weblogic.ASDomain.createDomain(ASDomain.java:2463)
  at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:631)
  at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:388)
  at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:870)
  at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:660)
  at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
  at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
  at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
  at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
  at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
  at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:82)
  at java.lang.Thread.run(Thread.java:619)
  progress in progress2 calculation
  
  I am looking this newspapers:
  ./oraInventory/logs/oraInstall2009-07-21_07-17-11AM.out
  ./oraInventory/logs/install2009-07-21_07-17-11AM.log
  ./oraInventory/logs/install2009-07-21_07-17-11AM.out
  
  Don't know where to to watch or what means this error.
  
  If some can help thank you in advance.
  
  Best regards.

  OK, problem solved.

  As I said in the first post, this has been implemented on our test environment so we have several installation here.

  The problem is that I chose the poor reception of WebLogic, I tried to install IDM 11 g using a home a WebLogic 10.3 instead of the 11 g version (10.3.1). Steps to fix the problem:
  (a) cancel the installation
  (b) run the runInstaller.sh with the - uninstall option and uninstall the Oracle Instance
  (c) to rerun the Setup program and by changing the House WebLogic and related paths to the version of WebLogic 11 g (10.3.1) home

  I would like to point out some things about this situation:

  (1) the installation program automatically selects the first WebLogic installation on the server, it is not serious is not the recommended version

  (2) the installation program never said the 10.3 version is not supported or the origin of this problem

  (3) newspapers say nothing about what is the main cause of the error

  Hope this helps.

  Best regards.

  Published by: higher on 5 October 2012 09:42

• Oracle 11g Installation of Windows R2 problem

  Hey everybody,
  
  I tried to install Oracle 11 g R2 on a computer Windows Server 2008 64 - bit. When installing, I get an error several times (about 20 times) message where it says that it can't find some files as C:\app\ora11g\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\WFMLRSVCApp.ear and a few other files too. If I click on go in the dialog box whenever an error occurs, the installation will succeed and completes successfully.
  
  What I'm doing wrong, what I have to change anything before installation starts?
  
  I use the 64-bit correct installation files that I downloaded from the homepage of the Oracle...
  
  Edited by: user12266335 the 07.04.2010 05:32

  I lived a similar problem. The first file, which it found was:

  $ORACLE_HOME\oc4j\...something...\em.ear

  There was a lot more after that.

  To give you some background, I unzipped my pieces of downloaded files (1 and 2) in the default directories.

  Who created two folders:

  ...\win32_11gR2_database1of2
  ...\win32_11gR2_database2of2

  When I had errors that were missing from the files, I thought I'd try choose my repertoire
  to decompress the files. I made sure that now, they went in the same directory:

  ...\win32_11gR2_database

  After that, I don't have the mistakes that I had before. Installation was successful. This technique is indicated in the documentation to a certain extent. However,.
  I think they need to emphasize that this is necessary, otherwise the installation will not work. Unlike Oracle 9i when we had several installation
  directories (disk1, disk2, disk3, etc.), the 11 GR 2 installer doesn't seem to be able to automatically find other/next directories. Looks like an oversight
  or a step backwards for me.

• Oracle 11g installation Assistant auto-off

  I am trying to install Oracle 11 G Enterprise edition. During installation, I am able to do

  1. The wizard is open.
  2. Installation option press next and goto
  3. I selected "create and configure a database" and click Next
  4. When I select 'office' and next success installation wizard is closing or stopping itself.

  I even tried to run the installer as administrator and also tried starting by "setup - jreLoc C:\Program Files\Java\jdk1.6.0_45" installation of the installation through cmd prompt, but both did not work.

  And I saw this thread with the same question that was unanswered problem installation customer of Oracle 11 g R2 64 bit on Windows 7 Enterprise 64

  Any help is appreciated.

  
  

  My last few lines of my setup log.

  Full background information: Operations

  INFO: Validation of the notice to the State < getOCMDetails >

  INFO: Finished view validating State < getOCMDetails >

  INFO: Validation State < getOCMDetails >

  GRAVE: You did not provide an email address.

  Want to stay informed about critical security issues in your configuration?

  INFO: Completed state validating < getOCMDetails >

  Information: Success of audit course

  INFO: Get the view named [InstallOptionsUI]

  Information: Builder of entry InstallOptionsUI

  INFO: InstallOptionsUI exit constructor

  INFO: View for [InstallOptionsUI] is oracle.install.ivw.db.view.InstallOptionsUI@5c17d6c1

  INFO: View initialization status < installOptions > < InstallOptionsUI >

  INFO: Completed initialization from the view state < installOptions > < InstallOptionsUI >

  INFO: Displays the mode < InstallOptionsUI > < installOptions > State

  INFO: Finished poster mode < InstallOptionsUI > < installOptions > State

  INFO: Loading view state < installOptions > < InstallOptionsUI >

  INFO: Finished loading view state < installOptions > < InstallOptionsUI >

  INFO: View location status < installOptions > < InstallOptionsUI >

  INFO: Finished view location status < installOptions > < InstallOptionsUI >

  INFO: Waiting for the completion of the operations in the background

  Full background information: Operations

  INFO: The execution of action to the State installOptions

  INFO: Completed the implementation of the action to the < installOptions > State

  INFO: Waiting for the completion of the operations in the background

  Full background information: Operations

  INFO: Moved to State < installOptions >

  INFO: Waiting for the completion of the operations in the background

  Full background information: Operations

  INFO: InstallOptions UI entry & exit processInput

  INFO: Validation of the notice to the < installOptions > State

  INFO: Finished view validating State < installOptions >

  INFO: Validation State < installOptions >

  INFO: Completed state validating < installOptions >

  INFO: InstallOptionsAction called Actions.transition

  INFO: selectedInstallOption is: INSTALL_DB_AND_CONFIG

  INFO: the inventory location isC:\Program

  INFO: Is false CRS installed

  INFO: launchNETCA = true

  INFO: Verification of course system_class

  INFO: Get the view named [SystemClassUI]

  Information: Builder of entry SystemClassUI

  INFO: SystemClassUI exit constructor

  INFO: View for [SystemClassUI] is oracle.install.ivw.db.view.SystemClassUI@26a150e

  INFO: View initialization status < getSystemClass > < SystemClassUI >

  INFO: the inventory location isC:\Program

  INFO: Is false CRS installed

  INFO: Completed initialization from the view state < getSystemClass > < SystemClassUI >

  INFO: Displays the < SystemClassUI > < getSystemClass >-state mode

  INFO: Finished poster mode < SystemClassUI > < getSystemClass > State

  INFO: Loading view state < getSystemClass > < SystemClassUI >

  INFO: Finished loading view state < getSystemClass > < SystemClassUI >

  INFO: View location status < getSystemClass > < SystemClassUI >

  INFO: Finished view location status < getSystemClass > < SystemClassUI >

  INFO: Waiting for the completion of the operations in the background

  Full background information: Operations

  INFO: The execution of action to the State getSystemClass

  INFO: Completed the implementation of the action to the < getSystemClass > State

  INFO: Waiting for the completion of the operations in the background

  Full background information: Operations

  INFO: Moved to State < getSystemClass >

  INFO: Waiting for the completion of the operations in the background

  Full background information: Operations

  INFO: SystemClassUI entry & exit processInput

  INFO: Validation of the notice to the State < getSystemClass >

  INFO: Finished view validating State < getSystemClass >

  INFO: Validation State < getSystemClass >

  INFO: the inventory location isC:\Program

  INFO: Is false CRS installed

  INFO: Completed state validating < getSystemClass >

  INFO: selectedSystemClass is: DESKTOP_CLASS

  INFO: Verification of course desktop_class_yes

  INFO: Get the view named [QuickInstallUI]

  Thank you!

  I found the solution for this problem. I think there was a problem with the user account settings. So, I created a new user and I tried to install. It worked.

• Oracle 11g installation on Oracle Virtual Box shape [solved]

  Hi friends I want to share my experience in oracle forms and reports on Virtual box installation if this post has already been done by someone, I'm really very sorry to post again. My intention is only to make installation as easy as possible, and for your information, this isn't a full installation of forms in itself, it's just for people who would like to work on a standalone machine.
  
  Software requirements
  
  (1) oracle Virtual Box
  (2) Xp professional edition - 32-bit
  (3) Oracle 11 g Server
  (4) Weblogic server - specific file name I used for the installation is (wls1033_oepe111150_win32)
  (5) portals oracle forms, reports and discoverer - file name (ofm_pfrd_win_11.1.1.2.0_32_disk1_1of1, 2, 3, 4)
  (6) portals oracle, forms, reports and discoverer - file name (ofm_pfrd_win_11.1.1.3.0_32_disk1_1of1) - Patch
  (7) Java 1.6
  
  Steps for installation
  
  (1) install Virtual box on your operating system and make sure u create 2 partitions
  
  c 15 GB and d drive around 10 GB
  allocate 2 GB of ram for the virtual machine
  
  (2) after completing the installation of XP in your area start Virtual installation Oracle 11 gb database that the path for Oracle home or in drive D most of the time oracle Installer chooses D drive if not good to change the D drive.
  
  (3) now install weblogic server keep installing type as typical, and install the application in the end uncheck 'run quick start '.
  
  (4) installation portals Oracle, forms, reports and discoverer - name of file (ofm_pfrd_win_11.1.1.2.0_32_disk1_1of1, 2, 3, 4) - unzip all files four zip and place it in the same folder and the open disk1 and run the installer. during installation choose install only software. Note: Do not try to configure.
  
  (5) once who completed unpack the content of second forms which is the file name (ofm_pfrd_win_11.1.1.3.0_32_disk1_1of1) - unzip the contents to a folder and run the installer it will update all the software generated by your previous installation.
  
  (6) now go to step 5 - this time, while installing choose install and configure, it will create the process required to run forms and reports.
  
  
  Very important note: make sure that your Home of Oracle Directory is "as_1" or else to ensure that that name u give all by performing step 5 and give the name of the same to step 6 and again when you run step 5 _
  
  (7) now all the required tools has been installed now a little tweaking to make it work.
  
  (a) copy the file tnsname.ora from the folder < username > \product\11.2.0\dbhome_1\NETWORK\ADMIN D:\app\ next
  (b) paste it in the folder - C:\Oracle\Middleware\asinst_1\config replace the file.
  
  (8) install the version of Java 1.6 or later
  
  (9) move shortcuts to programs and find the as_inst1 Oracle Instance classic-> Forms Services-> start weblogic server
  
  (10) make shortcuts of programs and find the as_inst1 Oracle Instance classic-> Developer Tools-> Forms Builder
  
  
  You now have your Oracle Forms and reports ready. If something is wrong in the right steps you forgive me (but tested a few times).
  
  Manoj Chakravarthy
  
  Published by: 829958 on January 21, 2011 10:44

  Yes, who knows that I use a day :)

  Thank you very much...

• Using Merge in oracle 11g this error SQL Error: ORA-30926: failed to get a stable set of rows in the source tables

  whenever I run this code I get this error

  SQL Error: ORA-30926: failed to get a stable set of rows in the source tables

  30926 00000 - "impossible to get a stable set of rows in the source tables.

  * Cause: A stable set of rows could not be achieved due to the large dml

  activity or one not deterministic where clause.

  * Action: Remove any non deterministic of the clauses and reissue of the dml.

  Don't know wht goes wrong!
  

  
  

  SQL:

  MERGE IN VENDORS_ACTIVE_DATE s

  USING (nvl (d.VENDOR, s.VENDOR) selection of the SELLER,

  NVL (d.COMPANY_CODE, s.COMPANY_CODE) COMPANY_CODE.

  (case when ((d.VENDOR = s.VENDOR) and (d.COMPANY_CODE = s.COMPANY_CODE)))

  )

  then "MATCH".

  When d.COMPANY_CODE is null

  then 'DELETE '.

  When s.COMPANY_CODE is null

  then "INSERT."

  else 'UPDATE '.

  chck end)

  from (select * from VENDORS_ACTIVE_DATE where COMPANY_CODE = 2) s

  full outer join (select * provider where COMPANY_CODE = 2) d

  on (d.COMPANY_CODE = s.COMPANY_CODE AND s.COMPANY_CODE = 2)

  ) d

  WE (d.COMPANY_CODE = s.COMPANY_CODE AND d.chck in ('UPDATE', 'GAME', 'DELETE'))

  WHEN MATCHED THEN

  UPDATE SET s.VENDOR = d.VENDOR

  WHERE d.chck in ('UPDATE', 'DELETE')

  DELETE WHERE d.chck = 'DELETE '.

  WHEN NOT MATCHED THEN

  INSERT (SELLER, COMPANY_CODE)

  VALUES (d.VENDOR, d.COMPANY_CODE)

  Work request: (deleted the duplicate data in tables (source and target))

  MERGE IN VENDORS_ACTIVE_DATE s

  USING (nvl (d.VENDOR, s.VENDOR) selection of the SELLER,

  NVL (d.ACTIVEDATE, s.ACTIVEDATE) ACTIVEDATE.

  NVL (d.COMPANY_CODE, s.COMPANY_CODE) COMPANY_CODE.

  (case when ((d.VENDOR = s.VENDOR))

  - AND D.ACTIVEDATE = S.ACTIVEDATE

  and NVL (d.ACTIVEDATE, trunc (sysdate)) = NVL (s.ACTIVEDATE, trunc (sysdate))

  and (d.COMPANY_CODE = s.COMPANY_CODE)

  )

  then "MATCH".

  When d.COMPANY_CODE is null

  then 'DELETE '.

  When s.COMPANY_CODE is null

  then "INSERT."

  else 'UPDATE '.

  chck end)

  from (select * from suppliers where COMPANY_CODE = 2) d

  full outer join (select * from vendors_active_date where COMPANY_CODE = 2) s

  on (d.COMPANY_CODE = s.COMPANY_CODE and s.vendor = d.vendor)

  ) d

  WE (d.COMPANY_CODE = s.COMPANY_CODE AND d.VENDOR = s.VENDOR AND d.chck in ('UPDATE', 'GAME', 'DELETE'))

  WHEN MATCHED THEN

  S.ACTIVEDATE = UPDATE SET d.ACTIVEDATE

  WHERE d.chck in ('UPDATE', 'DELETE')

  DELETE WHERE d.chck = 'DELETE '.

  WHEN NOT MATCHED THEN

  INSERT (VENDOR, ACTIVEDATE, COMPANY_CODE)

  VALUES (d.VENDOR, d.ACTIVEDATE, d.COMPANY_CODE)

• Oracle 9i installation error...

  Hello
  
  First of all, I have installed oracle 9i on linux accidentally I removed my orcle_home. I couldn't reinstall oracle 9i software?
  
  Thank you.

  Delete the inventory so before attempting a reinstall.

  The location of the inventory should be specified by/etc/oraInst.loc. After you remove the inventory, you can also delete the oraInst.loc file.

• Installation error of oracle database 11g

  I want to install an oracle 11g database and generates this error:
  not found in the registry the name of the root directory specified when updating the registry key "HKEY_LOCAL_MACHINE/software/oracle/OracleMTSRecoveryService/Setup/All Versions/1 '"

  You will need access to the registry. Then check it out.

  Access the registry as below

  Click the Start button, click Run, and type REGEDIT. Click OK.

• Oracle 11g Release 2 "error in the move file".

  Here, at the moment I am trying to install Oracle 11 g release 2 64 bit on Windows 7 64 bit. about halfway through the installation, I get an error message:
  
  "error in the C:\app\dlee14\product\11.2.0\dbhome_1\bin\oralbac11.dll to the C:\app\dlee14\product\11.2.0\dbhome_1\bin\oralbac11.dll.dbl file.
  
  What is happening and how to fix it?

  Hi user;

  Please check below:
  Oracle 11g R2 install on Windows 7 64 bit setup.exe does not work.

  Respect of
  HELIOS

• Silent installation error Oracle 12 c

  I see the error with the installation in silent mode on windows server 2012 oracle 12 c below.

  Googling for the error doesn't help much. In the silent file, I used the option create new Windows account for the user Oracle Home name

  oracle.install.IsBuiltInAccount = false

  oracle.install.OracleHomeUserName = oracle

  oracle.install.OracleHomeUserPassword=P@ssw0rd

  From Oracle Universal Installer...

  Preparations for the launch of Oracle Universal Installer from C:\Users\ADMINI~1\AppData\L

  ocal\Temp\2\OraInstall2014-05-07_12-25-48 h. Please wait... You can find the lo

  g of this installation session to:

  C:\Program Files\Oracle\Inventory\logs\installActions2014-05-07_12-25-48PM.log

  DLL to load is C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2014-05-07_12-25

  -48PM\Win64RunProcesses.dll

  C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2014-05-load PSAPI.dll

  07_12-25 - 48PM\psapi.dll

  PersistEnv

  INFO: c:\app\oracle\product\12.1.0\dbhome_1\odp.net\bin\4\oracle.dataaccess.dll

  is saved successfully to the GAC.

  INFO: c:\app\oracle\product\12.1.0\dbhome_1\odp.net\publisherpolicy\4\policy.4.1

  12.Oracle.DataAccess.dll is saved successfully to the GAC.

  INFO: The following article has been added.

  < name = "oracle.dataaccess.client article" type = "System.Data.Common.DbProviderConf

  igurationHandler, System.Data, Version = 4.0.0.0, Culture = neutral, PublicKeyToken =

  b77a5c561934e089"/ >

  INFO: The following element has been added under DbProviderFactories.

  "< add name =" ODP.NET, unmanaged pilot"invariant =" Oracle.DataAccess.Client "descr

  iption = "Oracle Data Provider for.NET, unmanaged pilot" type = "Oracle.DataAccess

  . Client.OracleClientFactory, Oracle.DataAccess, Version = 4.121.1.0, Culture = neutr

  Al, PublicKeyToken = 89b483f429c47342"/ >

  INFO: Counters registered successfully in the system.

  INFO: c:\app\oracle\product\12.1.0\dbhome_1\asp.net\bin\4\oracle.web.dll is regi

  STERED with success in the GAC.

  INFO: c:\app\oracle\product\12.1.0\dbhome_1\asp.net\publisherpolicy\4\policy.4.1

  12.Oracle.Web.dll is saved successfully to the GAC.

  NEWS: Series of entries added in the GroupedProviders.xml file.

  < name MembershipProvider = "OracleMembershipProvider" / > < RoleProvider name = 'Oracle '.

  RoleProvider"/ >

  NEWS: Following entry added to the machine.config file.

  < name = "OracleMembershipProvider" type = "Oracle.Web.Security.OracleMembershipP

  y, Oracle.Web, Version = 4.121.1.0, Culture = neutral, PublicKeyToken = 89b483f4

  29 c 47342 "connectionStringName = applicationName"OraAspNetConString"=" "enablePas"

  swordRetrieval = 'false' enablePasswordReset = "true" requiresQuestionAndAnswer = "tru."

  requiresUniqueEmail e' = 'false', passwordFormat = "Hashed" maxInvalidPasswordAttempt

  s = '5' minRequiredPasswordLength, minRequiredNonalphanumericCharacters '7' = '1' = no

  swordAttemptWindow = '10' passwordStrengthRegularExpression = "" / > "

  NEWS: Following entry added to the machine.config file.

  < name = "OracleProfileProvider" type = "Oracle.Web.Profile.OracleProfileProvider

  Oracle.Web, Version = 4.121.1.0, Culture = neutral, PublicKeyToken = 89b483f429c4734

  "connectionStringName 2" = "OraAspNetConString" applicationName = "" / >

  NEWS: Following entry added to the machine.config file.

  < name = "OracleRoleProvider" type = "Oracle.Web.Security.OracleRoleProvider, Ora

  key. Web, Version = 4.121.1.0, Culture = neutral, PublicKeyToken = 89b483f429c47342' co

  nnectionStringName = "OraAspNetConString" applicationName = "" / > "

  NEWS: Following entry added to the machine.config file.

  < name = "OracleSiteMapProvider" type = "Oracle.Web.SiteMap.OracleSiteMapProvider

  Oracle.Web, Version = 4.121.1.0, Culture = neutral, PublicKeyToken = 89b483f429c4734

  "connectionStringName 2" = "OraAspNetConString" applicationName = "' securityTrimming

  Enabled = "true" / >

  NEWS: Following entry added to the machine.config file.

  < name = "OraclePersonalizationProvider" type = "Oracle.Web.Personalization.Oracl

  ePersonalizationProvider, Oracle.Web, Version = 4.121.1.0, Culture = neutral, Public

  KeyToken = 89b483f429c47342' connectionStringName = "OraAspNetConString" application

  Name = "" / > "

  NEWS: Following entry added to the machine.config file.

  < name = "OracleWebEventProvider" type = "Oracle.Web.Management.OracleWebEventPro

  responsibility, Oracle.Web, Version = 4.121.1.0, Culture = neutral, PublicKeyToken = 89b483f429

  c47342 "connectionStringName = buffer"OraAspNetConString"="true"="Orac"bufferMode

  leNotification"/ >

  OraAspNetConString connection string name is correctly set

  INFO: c:\app\oracle\product\12.1.0\dbhome_1\ode.net\bin\4\oracle.database.extens

  ions.dll is saved successfully to the GAC.

  ERROR: Failed to add the user to access application ACL.

  No mapping between account names and security IDS was done.

  (534)

  ERROR: Cannot add the user to the ACL application launch.

  No mapping between account names and security IDS was done.

  (534)

  The installation of Oracle Database 12 c was successful.

  Please check "C:\Program Files\Oracle\Inventory\logs\silentInstall2014-05-07_12-

  25-48 PM .log "for more details.

  Software installation successfully.

  As user to install it, run the following to complete the configuration script.

  1 C:\app\oracle\product\12.1.0\dbhome_1\cfgtoollogs\configToolAllComman

  DS RESPONSE_FILE = < response_file >

  Note:

  1. This script must be run on the same host from where the Setup program was run

  .

  2. This script needs a small password for configuration properties file

  the assistants that require passwords (see to install the documentation guide).

  Please press ENTER to exit...

  Any help appreciated.

  This error comes if ORA_DBA group does not already exist. It is created during the installation and error should not be if you setup again. Error can be ignored.

  Thank you

  Ashish

• Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2014-02-25_01-35-08 PM. Please wait... Error in CreateOUIProcess(): 13: permission denied

  Hi all

  Im getting below error when installing on RHEL 6 12

  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2014-02-25_01-35-08 PM. Please wait... Error in CreateOUIProcess(): 13
  : Permission denied

  I got permission to

  mkdir Pei /u01/app/oracle/product/12.1.0/db_1

  chown-r oracle: oinstall/U01

  chmod-r 775/U01

  
  

  permission on temp
  

  drwxrwxrwt. 9 root root 4096/tmp

  
  

  Bash profile

  
  

  export TMP = / tmp
  export TMPDIR = $TMP
  export ORACLE_HOME=/u01/app/oracle/product/12.1.0/db_1
  export ORACLE_BASE = / u01/app/oracle
  export ORACLE_SID = BDEV
  export PATH = $ORACLE_HOME/bin: $PATH
  #export PATH = $ORACLE_HOME/OPatch: $PATH
  export LD_LIBRARY_PATH = $ORACLE_HOME/lib: / lib: / usr/lib
  Export CLASSPATH = $ORACLE_HOME/jlib: $ORACLE_HOME/rdbms/jlib

  The link refers to the TEMP variable as so defined.

  I think you would have to remove and back up/tmp at all the less for the new permissions to take effect.  I would not have thought that it is a dynamic change that takes effect by simply changing the file.

• the error of java that I encounter in oracle 11g when I using jdm

  I have finished a java data mining program, it can work in oracle 10g. But now, I must apply this program in oracle 11g.

  What should I do to make this work always in oracle 11g?

  The pot have been replaced with 11 g pot. But when I debug the program, programName m_ of the BuildTask is always "dmsys.build_program" and it should be "sys.build_program".

  Then when it is running to the executeTask, the error occurred.

  **************the  error**********************************

  19:19:55, AprioriExecuteUtil:248 DEBUGGING 734-

  19:19:55, DEBUG 734 AprioriExecuteUtil:249 - model Build.

  19:19:55, AprioriExecuteUtil:250 DEBUGGING 734-

  19:21:52, 328 ERROR AprioriExecuteUtil:114 - executeError:

  java.lang.ArrayIndexOutOfBoundsException: 0

  at oracle.dmt.jdm.task.OraBuildTask.mapJobArgs(OraBuildTask.java:410)

  at oracle.dmt.jdm.base.OraTask.retrieveObjectFromDatabase(OraTask.java:535)

  at oracle.dmt.jdm.base.OraTask.removeTaskContents(OraTask.java:229)

  at oracle.dmt.jdm.base.OraTask.removeObjectFromDatabase(OraTask.java:214)

  at oracle.dmt.jdm.resource.OraPersistanceManagerImpl.removeObject(OraPersistanceManagerImpl.java:297)

  at oracle.dmt.jdm.resource.OraConnection.removeObject(OraConnection.java:389)

  at oracle.dmt.jdm.OraMiningObject.saveObjectInDatabase(OraMiningObject.java:150)

  at oracle.dmt.jdm.resource.OraPersistanceManagerImpl.saveObject(OraPersistanceManagerImpl.java:245)

  at oracle.dmt.jdm.resource.OraConnection.saveObject(OraConnection.java:383)

  at com.hollycrm.hollysp.datanalysis.datamining.util.AprioriExecuteUtil.executeTask(AprioriExecuteUtil.java:324)

  at com.hollycrm.hollysp.datanalysis.datamining.util.AprioriExecuteUtil.buildModel(AprioriExecuteUtil.java:303)

  at com.hollycrm.hollysp.datanalysis.datamining.util.AprioriExecuteUtil.execute(AprioriExecuteUtil.java:108)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  *****************************************************

  So, if there is someone know the reason why, please tell me how to solve this error. Thank you!!!

  Hello

  I found the reason. It is caused by the ojdbc.jar.

  Thank you.