Oracle 11g SOA - bpel.preference

Similar Questions

• How to use the JKS-based Keystore in Oracle 11g SOA

  I'm doing FTPS on remote server of third party (with UNIX operating system) using SOA 11 g adapter FTP. I installed and configured vsftpd and generated vsftpd.pem file on the remote server certificate.
  Follow the steps mentioned in http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10231/adptr_file.htm#CIABDGCF
  
  In one step "Adjusting upward the FTP Oracle adapter" walletLocation is necessary, then I went through the steps mentioned in http://download.oracle.com/docs/cd/E17904_01/core.1111/e10105/wallets.htm#CHDGIJDC
  
  (Tried using both 1) JKS Keystore Management 2) portfolio management
  
  Impossible to find two of them in the Oracle 11g SOA em but the steps do not match.
  
  Can someone tell me how to use JKS Keystore or portfolio management?
  
  Thank you very much!!
  
  Concerning
  Yogesh

  Hi yogesh,

  I think that the portfolio can be created from the FMW console only if the HTTP server is installed and available. If there is no Oracle HTTP server, configure a specified in the.

  [http://download.oracle.com/docs/cd/E12839_01/doc.1111/e14260/toc.htm |] Oracle HTTP Server installation]

  Agress,
  Neeraj Sehgal

• Oracle 11g SOA suite in production

  Hello
  
  Please let me know that someone is using more SOA from Oracle 11g in the production. If she then, how it executes.
  
  
  Thank you
  
  Published by: Ramesh Tosun on October 14, 2010 22:48

  We went into production, and there is no performance related issues. We have 10 instances of L composites are created per day.

  We went for an active/active cluster. Only problem we are facing is the purge of the instances for which we couldn't get any promising solution Oracle

• Dehydration for the instances table fault BPEL in Oracle 11g SOA

  I wanted to capture the list of all the errors of Bpel, embedded on a composite treated during a day. I was able to learn a table by its name "COMPOSITE_INSTANCES_FAULT", which is to have the error messages relate to the failure of the composite, but don't have error messages not related to the failure of the Bpel.Could someone throw some clarity or a suggestion.

  Use the schema of the table REFERENCE_INSTANCE of the SOAINFRA.

  Kind regards
  Anuj

• 10.1.3.1 to 11G SOA upgrade

  Hello
  
  We use SOA/BPEL 10.1.3.1 for integration and the appserver is OC4J. SOA 11 g is built on WebLogic? Any pointer to upgrade to 11g SOA/BPEL?
  
  Thank you.

  Refer to the upgrade guide:
  http://download.Oracle.com/docs/CD/E12839_01/upgrade.1111/e10127/upgrade_soa_env.htm#BABGBIFI

• < error > < oracle.soa.bpel.engine.delivery > < BEA-000000 > - conversation id

  Hello
  
  I have this error to replicate, but can't as Im not aware of the effective implementation...
  
  < error > < oracle.soa.bpel.engine.delivery > < BEA-000000 >
  < < DeliveryHandler::initialRequestAnyType > no response not found for the answer for the conversation id
  urn: 965BA1C05C6711E19F2FB7716E234E2B >
  
  Guru, suggestions?

  I think that I did not change anything. Anyway, you can lift a SR with support.

  Kind regards
  Anuj

• How to call Oracle E-Business seeded program in SOA BPEL 11 g

  Hello
  
  I implement a point between third party system and Oracle inventory interface. My composite will treat the data element of the third party system and insert the data into the interface table (mtl_system_items_interface).
  
  Once integration is complete, I need BPEL call the program seeded (import items - INCOIN) to insert data from one table of interface in the base Oracle tables; in other words, mtl_system_items_interface to mtl_system_items_b.
  
  I tried using an adapter "Oracle Applications" but cannot place the INCOIN program. There's no options to find the INCOIN program either location.
  
  Someone knows how to call an Oracle planted a BPEL process program?
  
  Appreciate your help :)
  
  Hoang

  Hoang,

  You won't find the INCOIN in the Oracle Apps adapter. INCOIN is a simultaneous running of the Oracle Application program.
  The program INCOIN can be the call of the function: Fnd_Request.submit_request. To run this function, you have to sign the global settings (FND_GLOBAL. APPS_INITIALIZE) and have a validation in the end.
  I suggest you use the DB adapter to call a customization procedure where you can have all of these features inside.

  Arik

• Tutorials of training required for soa bpel

  Hi team
  
  I began self-learning SOA, BPEL, BAM, please give me a training tutorial to go with it...
  
  I installed the latest version of SOA 11g (11.1.1.4) suit...
  
  
  Thanks in advance
  
  AT

  You can go through the URLs below and start learning the SOA.

  http://www.Oracle.com/technetwork/middleware/soasuite/11gthebook-101473.html

  http://orasoa.blogspot.com/2007/05/newbie-getting-started-with-Oracle-SOA.html

  Thank you
  AJ

• Oracle 11g 11.2.0.1 connect to Forms 6i [32 bit] Version 6.0.8.11.3 (Production)

  Hello

  I set up a new server with Windows 8r2. Install Oracle 11 g 64 bit.

  Mounted 10 32-bit Desktop windows forms [32-bit] Version 6.0.8.11.3 (Production).

  I am able to connect to Oracle 9i. but I want to connect to Oracle 11g

  Are there measures where I can solve my problem.

  already had made the following changes to the server

  C:\ > sqlplus/nolog

  SQL > connect / as sysdba

  Conectado.

  SQL > shutdown immediate

  SQL > startup restrict

  SQL > alter database character set internal_use UTF8;

  SQL > shutdown immediate

  SQL > startup

  Under sqlnet.ora I changed

  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)

  SQLNET. ALLOWED_LOGON_VERSION_SERVER = 8

  SQLNET. ALLOWED_LOGON_VERSION_SERVER = 8

  SQLNET. ALLOWED_LOGON_VERSION_CLIENT = 8

  I'm still not able to connect.

  Sandy

  1. what error message do you receive forms 6i when you can not connect

  2. what level of Forms 6i patch do you have?  A more recent patch level may be required.

  Tony

• That means 1z0-117 oracle 11g sql tuning now say it includes v12 addition v11

  Hello

  I did the 1z0-117 sql tuning review once.

  Not too far away.

  I studied under and turned off for a while.

  I anticipate taking in 1 month.

  However, I just noticed that the oracle site says 1z0-117 also said that v12 is also included for consideration:

  Oracle 11g sql tuning.

  It makes no sense at all.

  Roger

  However, I just noticed that the oracle site says 1z0-117 also said that v12 is also included for consideration:

  Oracle 11g sql tuning.

  Unless you are looking for something I'm not, what actually is the 1Z0-117 page says: "validated against: review has been validated against Oracle Database 11g Release 2 version 11.2.0.1.0 and database Oracle 12 c 12.1.0.1.0"

  What they actually mean by it is that someone went through all the issues and and asked the question "is still a relevant issue for the release of 12 c to Oracle?'." "  If they find issues that are not valid because of an update/change, then the question will be removed from review (or changed) so that someone who has used 12 c but not 11 g will not at a disadvantage.

  This is * No * means that Oracle has added questions to the review of the capabilities that were introduced in version 12 c.

• Oracle 11g r1 license work for oracle 11g r2?

  Hello

  We have license of oracle 11g r1 then do we need to purchase a separate license to upgrade to 11g r2?

  Hello

  No, no need to buy a separate license to upgrade to 11g r2 just improved it.

  Amatu Allah.

• How can I create a list of choices for the search bit in Oracle 11g ADF fields?

  Hi Experts,

  Please inform how to add some selection list or drop downs on the pane search Oracle 11g ADF.

  I have a requirement to create a list of choices for the search store field. # Please notify.

  

  Thank you

  David Selvaraj

  You can create a view based on a static list object and attach it to your attribute as lov-driven model.

  Dario

• Shape how Hide bar by default in oracle 11g

  Hi people of genius.

  I want to just hide the bar window by default in forms of oracle 11g. Please advise me how to hide who I had him marked in red below.

  Thank you

  This thread appears to be a bit confusing.  You try to delete the entry 'Window' menu or the bar together, which includes the Oracle logo?  If you try to remove the whole bar AND that you use the latest version of forms (11.1.2.2), you can use the new applet parameter guiMode.  This new feature of 11 GR 2 allows to hide the various window dressings.  See the Deployment Guide forms 11.1.2 for more details on how to use this new feature:

  http://docs.Oracle.com/CD/E48391_01/doc.11120/e24477/basics.htm#FSDEP759

• use of temporary space in oracle 11g rac

  Hello

  Oracle version: oracle 11g r2

  OS: linux

  storage: asm on exadata

  Please help us understand the use of the temp

  {code}

  SQL > set linesize 1000
  SQL > set pagesize 1000
  SQL > col USERNAME format a20
  SQL > col SPID format a10
  SQL > col MODULE format a30
  SQL > col PROGRAM format a30
  SQL > SELECT s.sid, s.serial #, s.username
  2, p.spid, s.module, p.program
  3, SUM (su.blocks) * tbsp.block_size/1024/1024 mb_used
  4, su.tablespace
  5. FROM v$ sort_usage su
  6, v$ session s
  dba_tablespaces tbsp
  7, $v 8 p process
  9 WHERE su.session_addr = s.saddr
  10 AND su.tablespace = tbsp.tablespace_name
  11 AND s.paddr = p.addr
  GROUP 12 OF
  13 s.sid, s.serial #, s.username, s.osuser, p.spid, s.module,.
  14 p.program, tbsp.block_size, su.tablespace
  15 ORDER BY s.sid;

  USERNAME SID SERIAL # SPID MODULE PROGRAM MB_USED TABLESPACE
  ---------- ---------- -------------------- ---------- ------------------------------ ------------------------------ ---------- -------------------------------
  11 2092 DBSNMP 2861 emagent_SQL_oracle_database Oracle @ [email protected] 8 TMP4

  SQL > select * from v$ temp_space_header;

  FILE_ID BYTES_USED, BYTES_FREE BLOCKS_FREE RELATIVE_FNO BLOCKS_USED NOM_TABLESPACE
  ------------------------------ ---------- ---------- ----------- ---------- ----------- ------------
  TMP1 2 + 12 222274816 33554432 2048 1024 3.6418E
  TMP3 4 + 11 19283968 75497472 4608 1024 3.1595E
  TMP4 5 + 11 19687936 0 0 1024 3.2257E
  TMP5 6 + 13 688638464 0 0 1024 1.1283E

  {code}

  Why isn't bytes_used reclaim as only 8 MB is currently using

  Thank you

  PMP

  I wanted to tell temp is never off allocated. So, if a 'bad' query explodes temp. the only thing you can do is to create a new and drop the old one.

  11 GB temp is clearly ridiculous. Usually, this is caused by the merge join Cartesian paths in your instructions.

  -----------

  Sybrand Bakker

  Senior Oracle DBA

• How interrogate a user affected temp and tableapce default tablespace in oracle 11g?

  I have this SUNNY user on my DB. Now, I want to know how to query an affected user temp and tableapce default tablespace in oracle 11g?

  I tried Google, but no luck. can anyone help?

  Select the name of user, USER_USERS, temporary_tablespace from dba_users where username = "SUNNY";

  or

  Select the name of user, USER_USERS, temporary_tablespace from user_users where username = "SUNNY";