Oracle 11g upgrade in AIX 6.1 with HACMP
Hi friends,As I have two Power servers in AIX 6.1 with oracle 10g in HACMP in which SAP application runs.
That is independent of database and other Central Instance.
I did 11g successfully upgrades in my DEV and QAS servers which are nonclustered environment.
Now I want to upgrade even in PRD tends in HACMP.
Let me know what are the areas should I focus especially on the servers in cluster environment.
Thank you
Hari
I'm still not sure what you mean by a DB server and a CI server.
In a configuration HACMP, 2 node, Id expect to see something like
/ U01 hosts ORACLE_HOME locally on each node
/u04...etc/u03/U02 are HA mounts you will see on the active node. In your case I suppose that its all the materials for lv, but if that's true you also put your ORACLE_HOME to be a point of mounting HA
>
..
/ dev/lv_pip_64 10.00 18988 5.73 43% 2% / oracle/PIP/102_64
..
>
on your passive node, compare the mount points and itll be clearer. If you have your Oracle_home to be as much a mount HA, Id be careful with who you are, then past to the operating system with host names on install. But anyone who installed it would be tested failover (you hope) leaves thus temporarily assumes its ok. It's easier then on you that you only 1 upgrade to do and that is on the mounted oracle_home.
Tags: Database
Similar Questions
-
Oracle 11g on IBM - AIX 5.3 LPAR with VIO-Server
Hello
We are researching the application of Oracle RAC 11 g on the solution IBM LPARS running IBM AIX 5.3 TL06
These LPAR uses a VIO-server access I/o.
Now a paper said THAT Violence is not supported for Oracle RAC, the other document's and jet of another State, it is only supported for use with the DSO
Can someone point me to a site with real support information or can someone tell me if the RAC is currently working on an LPAR with a VIO Server
Thanks in advanceIt's the matrix of certification:
http://www.Oracle.com/technology/products/database/clustering/certify/tech_generic_unix_new.htmlIE even RAC + asm must be used if violence is used for 11g thus.
-
AS10GR2 Oracle Fusion, Oracle 11g->; Upgrade Options
Dear Guru
Ask your expertise to help me with this. We have an existing installation on Windows 2003 with components... below and company wish to upgrade to Fusion 11g Oracle. I have been through the Documentation Oracle 11 g & a couple other sites for this
http://download.Oracle.com/docs/CD/E12839_01/install.htm
Yet little is not clear on the side of the Infrastructure.
1. What is Web Oracle level-> it's the same as Infrastructure Oracle 10 g 2?
2. what I need to do if I want to setup the following components listed in the Oracle Infrastructure?
Here is the configuration that is currently running from now *.
Oracle infrastructure such as identify 10 gr 2 management and repository of metadata (10.1.2.0.2)
Oracle Internet Directory
Oracle AS Single Sing-On
Delegated under Oracle Administration application server
Oracle high availability and replication (configured with Oracle Fail Safe)
********
Forms and Business Intelligence
Oracle Application Server 10g discoverer
The reports of Oracle Application Server 10 g services
Oracle Application Server 10g Forms Services
****************************
I connected a case with My Oracle Support just before... the same thing... and thought of doing the same thing here.
Thanks in advance
RaviRavi,
WebTier is a House with Cache Web Oracle and Oracle HTTP Server installed. It can act as a frontend for example WLS.
With Fusion Middleware 11g, SSO does not make the product more. If you are using SSO in your current installation, you can move your existing 10.1.4.3 SSO and use it with a 11 g, portal, reports, forms, and discoverer of House.
You should be able to follow the instructions in the next upgrade guide:
Oracle® Fusion Middleware Upgrade Guide for Oracle Portal, forms, reports, and discoverer
11g Release 1 (11.1.1)
E10130-02 part number(http://download.oracle.com/docs/cd/E15523_01/upgrade.1111/e10130/toc.htm)
Thank you
EJ -
All,
I installed oracle bi application for 11.1.1.7.1 AIX 7.1 server. My process of BI applications configuration is to launch a mistake in the part configuration ODI. Detailed error is pasted below. I perform software only installation as with AIX, you must select Install only software for OBIEE and OLIVIER and configure BIAPPS later.
I saw two others archived son who discusses this error, and it seems that it is events expected for deployments of AIX error. And both of them say that it is ok to continue the Setup process and make this ODI configuration for later.
However, the instructions on how to do this from one of the thread is fragmentary or incomplete. If you guys have run into that, can you please guide on how you have been able to solve this problem? The location for 2 OTN discussion is stuck here as well.
Re: OLIVIER 11.1.1.7.1 install the mistake out to ODI configuration
Error:
configure_odi: problem invoking WLST - Traceback (innermost last):
configure_odi: file ' < userpath > / Oracle/Middleware/Oracle_BI1/bifoundation/install/configure_odi.py ", line 261, in?
configure_odi: file ' < userpath > / Oracle/Middleware/Oracle_BI1/bifoundation/install/configure_odi.py ", line 206, in _configureOdiDwIntegration
configure_odi: at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
configure_odi: to sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:56)
configure_odi: to sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:39)
configure_odi: to java.lang.reflect.Constructor.newInstance(Constructor.java:527)
configure_odi:
configure_odi: java.lang.Exception: java.lang.Exception: update of the database of the DW_FILE server failed with return code: 1
configure_odi:
java.lang.Exception: java.lang.Exception: WLST Script task failed with status 1
at oracle.as.install.biapps.biappsconfig.standard.ODIConfigTask.doExecute(ODIConfigTask.java:65)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:738)
Caused by: java.lang.Exception: WLST Script task failed with status 1
at oracle.as.install.bi.biconfig.standard.WLSTScriptTask.doExecute(WLSTScriptTask.java:119)
at oracle.as.install.biapps.biappsconfig.standard.ODIConfigTask.doExecute(ODIConfigTask.java:62)
... 12 more
RP
So, that's what we were doing to solve this problem:
1 let the Configuration process continue with the error. All other tasks should complete successfully.
2. install the ODI studio on a client computer, WIndows/Linux.
3. manually the program installation/editing file server and data server technology tab.
RP
-
Migrating oracle 9i to oracle 11g but now dblink is no work
First of all, sorry for my English.
Achieved an export from the old to the new db_links and now do not work.
Oracle 9i - work
13:52:45 card > @banco
Mostra user, instance, e start time host - pressure enter para continue
E the USER 'SYSTEM '.
INSTANCE_NAME HOST_NAME STATUS STARTUP_TIME
---------------- ---------------------------------------------------------------- ------------ --------------
atlas1 card OPEN 01/23/12 17:53
Decorrido: 00:00:00.03
BANNER
----------------------------------------------------------------------------------------------------
Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
PL/SQL Release 9.2.0.8.0 - Production
CORE Production 9.2.0.8.0
AMT for Linux: Version 9.2.0.8.0 - Production
NLSRTL Version 9.2.0.8.0 - Production
Decorrido: 00:00:00.03
13:52:46 card >
13:52:59 card > @dblink
Informed o valor para db_link: scapr
OWNER, DB_LINK CREATED USERNAME HOST
-------------------- ------------------------------ -------------------- ------------------------------ --------------
SCAPROD.PANVEL.COM.BR PUBLIC LINK SCA 17/11/11 14:35
Decorrido: 00:00:00.03
13:53:03 card > desc dual@scaprod
Nome
-------------------------------------------------------------------------------------------------------------------------
MODEL
13:53:07 card > desc [email protected]
Nome
-------------------------------------------------------------------------------------------------------------------------
MODEL
13:53:16 card >
13:53:16 card > show the global setting
VALUE OF TYPE NAME
------------------------------------ ----------- -------------
global_context_pool_size string
global_names boolean FALSE
13:53:40 card >
Oracle 11g - does not, a little work with the full name of the db_link:
13:53:57 nouveaute11 > @banco
Mostra user, instance, e start time host - pressure enter para continue
E the USER 'SYSTEM '.
INSTANCE_NAME HOST_NAME STATUS STARTUP_TIME
---------------- ---------------------------------------------------------------- ------------ -----
aquarius card OPEN 01/26/12-13:42
Decorrido: 00:00:00.01
BANNER
----------------------------------------------------------------------------------------------------
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE Production 11.2.0.3.0
AMT for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
Decorrido: 00:00:00.04
13:53:58 nouveaute11 >
13:54:12 nouveaute11 > @dblink
Informed o valor para db_link: scapr
OWNER, DB_LINK CREATED USERNAME HOST
-------------------- ------------------------------ -------------------- ---------------------------
SCAPROD.PANVEL.COM.BR PUBLIC LINK SCA 26/01/12 13:02
Decorrido: 00:00:00.03
13:54:16 nouveaute11 > desc [email protected]
Nome
---------------------------------------------------------------------------------------------------
MODEL
13:54:23 nouveaute11 > desc dual@scaprod
ERROR:
ORA-02019: description of conexao para o banco dados não localizada remote
13:54:26 nouveaute11 >
13:54:41 nouveaute11 > display the global setting
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------
global_context_pool_size string
global_names boolean FALSE
global_txn_processes integer 1
13:54:45 nouveaute11 >
Any help? :)
Thank you!vitorjr81 wrote:
As you can see the db_link is functional, but just with the name and surname:13:54:16 nouveaute11 > desc [email protected]
Name MODEL13:54:23 nouveaute11 > dual@scaprod desc
ERROR:
ORA-02019: description of conexao para o banco dados não localizada remote13:54:26 nouveaute11 >
13:54:41 nouveaute11 > display the global setting
VALUE OF TYPE NAME
-chain global_context_pool_size
global_names boolean FALSE
global_txn_processes integer 1Do as below and post the results here
SQL> select global_name from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- V112 SQL>
-
apex 4.0 with oracle 11g ee mail
Hello
I spent when you work with apex 3 I could work with apex mailsend very nice.
Apex 4.0 with oracle 11g ee, I'm not able to send emails any more.
Last error message in the queue is:
ORA-29279: permanent SMTP error: 550 via this server without authentication.
the smtp server has not been changed, the code is very well
How can I go further?
Thank you very much
FlorinFlorin,
Make sure that you use the relevent to instructions for your version.
If you use 4.0 - you probably want the same script - with use of APEX_040000 appropriate.See the steps of INSTALLATION of document ITEM.
http://docs.Oracle.com/CD/E17556_01/doc/install.40/e15513/otn_install.htm#CBHBABCC
-Make sure that you don't drop the former users of apex framework before update or remove them from the ACL. It can cause you problems.
-Tim St.
P.S. Take a minute to update your profile so that your name is clear.
Published by: Tim St. H., December 11, 2012 16:54
-
OBIEE 10.1 with Oracle 11g
10 OBIEE can work with Oracle 11 g?
I installed OBIEE 10 g on my laptop (window Home premium Vista)
I then installed Oracle database 11g (desktop version)
When I tried to import the database into the administrator create a repository, I provided the connection string for oracle 11g, but it gave me following error
Failed to load c:\OracleBI\Server\bin\nqsdbgatewayoci10g.dll dll. Check if the database Oracle 10 g client is installed.
Edited by: 967447 November 30, 2012 07:12Try to reinstall or install the Oracle client with advanced features. That solved your problem.
OR
1.uninstall/remove the previous 64 Bit JDK, 64-bit Oracle Client and OBIEE
2. download and install the 32 Bit JDK and the 32 Bit Oracle 11 G client
3 reinstall OBIEE OTM Administrator GuideAppreciate if you mark as correct
-
Oracle 11g R2 RAC on IBM with SAN storage
Hello Experts,
I design an implementation for RAC Oracle 11 g 2 on AIX 6.1 with IBM's SAN storage. My drawing do not include Oracle ASM, I know, it is recommended to use Oracle ASM, but my purpose is not included
I read the Guide of Installation of Oracle Grid Infrastructure and I have below questions about storage configurations:
1. do I need a special configuration to replace the DSO?
2. is it compulsory to use HACMP (IBM's Clustering solution) because I don't use ASM? Since based on the infrastructure Grid section 3.2 Installation guide (the Storage Configuration shared): [http://download.oracle.com/docs/cd/E11882_01/install.112/e17210/storage.htm] there is a section 3.2.7 "Configuration HACMP multinode disk Heartbeat (MNDHB) for Oracle Clusterware" so my question is it is mandatory to use HACMP if I don't want to use ASM?
3. in the same above installation guide, mentioned in section 3.2.8 that "to use the raw logical volumes for Oracle Clusterware, HACMP must be installed and configured on all nodes in a cluster." what is raw logical volumes? is it compulsory to use it? Since I'm not on ASM?
4 installation guide, in sections 3.2.3 to sections 3.2.9 are these prerequisites sections sections 3.2.10 to 3.2.15? or I can simply ask section 3.2.10 to 3.2.15 without applying 3.2.3 to 3.2.9?
One last Question:
ASM is integrated with the cluster software, do a separate license or license the license of the ASM cluster cover?
Kind regardsNB wrote:
Hello Levi,the information provided is very useful. But what I heard in the installation guide network infrastructure that the raw device needs HCMP while GPFS need not of HACMP, GPFS is a cluster provided by IBM file system.
Your input please?Hello
Raw disk device (RD) is the LUN (disk) storage mapped on AIX.
Raw logical volume (RLV) is the LUN (device) created the LVM of AIX.If you use devices of raw disk that you don't need HACMP, because AIX (core) has only receive instructions from Oracle to read and write, AIX does not support concurrency control in the raw disks, this control is managed by Oracle.
If you use raw logical volumes (CLVM) HACMP must be installed and configured on all nodes in the cluster, volume logic is a feature of AIX (IBM) to enable simultaneous mode, you install HACMP, Oracle not manage concurrency control because Oracle does not know that there is an LVM behind.
You are right, that the new version of GPFS are usable without HACMP.
Kind regards
Levi PereiraPublished by: Levi Pereira on October 8, 2011 17:26 # update the info on gels of features
-
Oracle 11g with problem of pdf cocoon.war and glassfish?
Hi all
I m install oracle 11g express on CentOS OS, oracle apex earphone 1.1.2.131.15 5.6
GlassFish v2 and cocoon 2.1.11 and connect to oracle apex glasfish works very well
Problem start when I had cocoon xml build and deploy cocoon.war on glassfish,
addition of fop_post on cocoon/fop_post (as described on http://carlback.blogspot.com/2007/03/apex-cocoon-pdf-and-more.html) but the pdf don't work!
(I've been putting all the steps on the machine of 11.2 to 32-bit suse and ubuntu 8.04 - 32 bytes and pdf open work well)
Y at - he no idea what happen whith this pdf error?
Is the problem with 64 bytes some specific parameters, with java jdk, Cocoon, glassfish, or something on apex of oracle 11g?
Gordan
Published by: useruseruser on June 20, 2011 21:49Hi Gordon,.
Once again, great to hear that!
Could you rent close this thread and mark any post useful or correct if your question is answered?Thank you
Udo
-
Problem with Oracle 9i and Oracle 11g
Hello
I have 2 Installation of Oracle: Oracle 9i client and Server Oracle 11.2
Oracle 9i to: C:\oraclient9\
Oracle 11g: C:\app\a.l\product\11.2.0\
I have an application that has to connect to Oracle via ODBC, but whenever I try to connect looking for odbc Oracle 9i and I get this error:
ORA-12541: TNS no listener
If I try to boot with sqlplus to: start-> run-> sqlplusw get Oracle 9i version
If I'm running sqlplus from start-> program-> Oracle 11-> I can connect properly.
If I try to create a new ODBC it always plug the Oracle version 9i.
I tried:
Set ORACLE_HOME=C:\app\a.l\product\11.2.0\dbhome_1
Set ORACLE_SID = ORCL
but when I try: sqlplus / as sysdba I get this error:
14 error initializing SQL * more
SP1 file < lang > .msb not found message
SP2-0750: you may need to set ORACLE_HOME in your Oracle software directory
If I try to boot with sqlplus to: start-> run-> sqlplusw get Oracle 9i version with the error:
ORA-12541: TNS no listener
Variables environment variables in the path are:
C:\oraclient9\bin; C:\Program Files\Oracle\jre\1.3.1\bin; C:\Program Files\Oracle\jre\1.1.8\bin; C:\app\a.l\product\11.2.0\dbhome_1\BIN; C:\app\a.l\product\11.2.0\dbhome_1\bin;%SystemRoot%\System32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\WindowsPowerShell\v1.0\; C:\Program Files\Sybase\SQL Anywhere 9\win32. C:\Program Files\Sybase\Shared\win32; C:\Program Files\Sybase\SQL Anywhere 9\drivers; C:\Program Files\Sybase\Shared\Sybase 4.2 Central; c:\Program Files\Microsoft SQL Server\90\Tools\binn\; C:\Progra~1\XRay
tnsnames 11g:
tnsnames 9i:# tnsnames.ora Network Configuration File: C:\app\a.l\product\11.2.0\dbhome_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. LISTENER_ORCL = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) ORACLR_CONNECTION_DATA = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (CONNECT_DATA = (SID = CLRExtProc) (PRESENTATION = RO) ) ) ORCL = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl.domopenplan.local) ) )
11g listener.ora:# TNSNAMES.ORA Network Configuration File: C:\oraclient9\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL.DOMOPENPLAN.LOCAL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = orcl.domopenplan.local) ) )
Do you have any idea how I can create a new ODBC to connect to Oracle 11g?# listener.ora Network Configuration File: C:\app\a.l\product\11.2.0\dbhome_1\network\admin\listener.ora # Generated by Oracle configuration tools. SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = CLRExtProc) (ORACLE_HOME = C:\app\a.l\product\11.2.0\dbhome_1) (PROGRAM = extproc) (ENVS = "EXTPROC_DLLS=ONLY:C:\app\a.l\product\11.2.0\dbhome_1\bin\oraclr11.dll") ) (SID_DESC = (GLOBAL_DBNAME = orcl.domopenplan.local) (SID_NAME = orcl.domopenplan.local) (ORACLE_HOME = C:\app\a.l\product\11.2.0\dbhome_1) (PROGRAM = extproc) (ENVS = "EXTPROC_DLLS=ONLY:C:\app\a.l\product\11.2.0\dbhome_1\bin\oraclr11.dll") ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.103)(PORT = 1521)) ) ) ADR_BASE_LISTENER = C:\app\a.l
Thanks in advance!opening for the system control window Server DB & question OS command sequence
lsnrctl status
set
lsnrctl serviceCOPY orders & results then PASTE all come back here
-
Installing Oracle 11g with ASM
Hi all
I'm new with oracle 11g and I want to create a database with ASM and I can't get there.
Could someone tell me the step to make or send a link here?
Fact the below steps
1 - install the software oracle only
2. install and configure grid infrastructure
3. create the database with asm
Thanks in advanceSalvation;
Please check the docs below for steps
http://www.Oracle.com/technology/products/database/ASM/index.html
http://www.Oracle-base.com/articles/11g/AsmEnhancements_11gR1.php
http://www.pafumi.NET/RAC11g_and_ASM_on_VMware.PDFRespect of
HELIOS -
Oracle 11g with Oracle 9i RMAN backup
Dear all
Can we do the backup of Oracle 11g with Oracle 9i RMAN database, is it possible and did everything a try this?
Thanks in advance.
concerningYes its possible.
Check this matrix,
http://download.Oracle.com/docs/CD/E11882_01/backup.112/e10643/compat003.htm#i634479
HTH
Aman...Published by: Aman... on January 11, 2010 18:07
updated the link from 11.1 to 11.2 docs. -
Oracle 11g compatibility with oracle 10g and 9i?
Hi all
I have a few questions about the compatibility of 11g.
Client Oracle 11g is compatible with oracle 10g client that is already installed on the desktop computer?
If any changes to do so and where?
Is oracle 11g oracle 10 g/9i on the same server where are installed the 10 g/9i compatible?
Concerning
If the question you ask yourself is 'Can I have multiple versions of the Oracle installed on the same client computer' or "Can I have several versions of the database Oracle installed on the same machine", the answer is Yes. As long as you install each version in another House of Oracle, and we are talking about versions 8.1.5 and upward, you can have as many different versions of the client and the database on the same machine as you wish. Of course, you are still subject to the support of operating system compatibility (e.g. Oracle 9.2 did not had been supported on Windows 2008, so do not expect to work).
The only problem you may have would be with components that are not compatible with several House. This mainly affects third-party Windows drivers (drivers third party ODBC, etc.) who do not know how to work with multiple Oracle homes and end up using which version of the client Oracle happens to appear first in the path.
Justin
-
Set the events in oracle 11g for SAP
Hi all
Recently, we have updated 10.2.0.4 oracle database at 11.2.0.3 (AIX 7.1) for the SAP application.
Some settings of the default event have been set when the database has been executed with 10.2.0.4 version. After upgrading to 11.2.0.3, these events have not observed pfile/spfile. However, the post_upgrade log shows that these events have been defined (and journal displays a list of events as well).
Now, my concern is whether the settings of the event have been put already by default (if it is already set after upgrade, don't know why pfile reflecting is not them) or do I have to adjust the settings manually.
Thanks in advance for your help.
Kind regards
PrakashSee SAP Note 1431798 for a list of the parameters of the event required. These are correct. You must also run the last Patch Bundle SAP that specifically tells you to set these events after the installation of the hotfix. If you have run the wrapper of dbua SAP by their 11g upgrade instructions, I think that it defines these events for you as well.
-
Oracle database upgrade failed due to the ORA-600
Hi team,
I tried to upgrade my stand-alone database 10.2.0.3 to 11.2.0.1. The OS is AIX 6.0, its HACMP cluster (which one of the nodes is down). During the upgrade to xdb oracle upgrade process failed with error ORA.
Please let me know what can be done that the upgrade was interrupted between the two.
of catupgrd.log
2269 2tWY2pY/umK1A6n4/gYjDbxa / / lwT3KuHx5DmP4f2JH2xNd18ZWYCtlOE9VN7CG9tvYUym/1
2270 yAgCxuRupEOWlCURc1A67ggoX55JrrdMmdTY + ks3upr7gMLz2CAPZCDiD5YZlnLx6E87TD4K
2271 zC4NBjAuMRjWDUO1u7Uo7oYNxg is
2272
2273.
CREATE or REPLACE package body enveloped dbms_stats
*
ERROR on line 1:
ORA-03113: end of file on communication channel
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE
JOURNAL ALERTS:
The SERVER COMPONENT ID = XML: status = VALID, version = 11.2.0.1.0, timestamp = 2013-07-19 19:47:48
Fri Jul 19 19:48:42 2013
Thread 1 cannot allot of new newspapers, sequence 3993
Checkpoint is not complete
Currently Journal # 2 seq # 3992 mem # 0: /data/oradata/xxxxxx/redo02.log
Thread 1 Advanced for you connect to sequence 3993 (switch LGWR)
Currently Journal # 3 seq # 3993 mem # 0: /data/oradata/xxxxxx/redo03.log
Fri Jul 19 19:50 2013
Thread 1 Advanced for you connect to sequence 3994 (switch LGWR)
Currently journal # 1, seq # 3994 mem # 0: /data/oradata/xxxxxx/redo01.log
Fri Jul 19 19:50:22 2013
Errors in the $DIAG/diag/rdbms/xxxxxx/xxxxxx/trace/xxxxxx_ora_3817488.trc file (incident = 1353):
[ORA-00600: internal error code, arguments: [qmx: no ref], [], [], [], [], [], [], [], [], [], []]
Incident details in: $DIAG/diag/rdbms/xxxxxx/xxxxxx/incident/incdir_1353/xxxxxx_ora_3817488_i1353.trc
Fri Jul 19 19:50:42 2013
Errors in the $DIAG/diag/rdbms/xxxxxx/xxxxxx/incident/incdir_1353/xxxxxx_ora_3817488_i1353.trc file:
ORA-00308: cannot open archived log ' / data/redolog/1_1465_616683947.arc'
ORA-27037: unable to get file status
IBM AIX RISC System/6000 error: 2: no such file or directory
Additional information: 3
[ORA-00600: internal error code, arguments: [qmx: no ref], [], [], [], [], [], [], [], [], [], []]
Errors in the $DIAG/diag/rdbms/xxxxxx/xxxxxx/trace/xxxxxx_ora_3817488.trc file (incident = 1354):
[ORA-00600: internal error code, arguments: [qmx: no ref], [], [], [], [], [], [], [], [], [], []]
Incident details in: $DIAG/diag/rdbms/xxxxxx/xxxxxx/incident/incdir_1354/xxxxxx_ora_3817488_i1354.trc
Fri Jul 19 19:50:43 2013
Scan [inc] [1353]: completed
Sweep [inc2] [1353]: completed
Fri Jul 19 19:50:43 2013
Track of dumping performs id = [cdmp_20130719195043]
Fri Jul 19 19:51:03 2013
Errors in the $DIAG/diag/rdbms/xxxxxx/xxxxxx/trace/xxxxxx_ora_3817488.trc file (incident = 1355):
[ORA-00600: internal error code, arguments: [], [], [], [], [], [], [], [], [], [], []]
Incident details in: $DIAG/diag/rdbms/xxxxxx/xxxxxx/incident/incdir_1355/xxxxxx_ora_3817488_i1355.trc
Fri Jul 19 19:51:03 2013
Track of dumping performs id = [cdmp_20130719195103]
Fri Jul 19 19:51:23 2013
Errors in the $DIAG/diag/rdbms/xxxxxx/xxxxxx/trace/xxxxxx_ora_3817488.trc file:
Errors in the $DIAG/diag/rdbms/xxxxxx/xxxxxx/trace/xxxxxx_ora_3817488.trc file (incident = 1356):
[ORA-00600: internal error code, arguments: [], [], [], [], [], [], [], [], [], [], []]
Incident details in: $DIAG/diag/rdbms/xxxxxx/xxxxxx/incident/incdir_1356/xxxxxx_ora_3817488_i1356.trc
Fri Jul 19 19:51:24 2013
Track of dumping performs id = [cdmp_20130719195124]
Fri Jul 19 19:51:37 2013
Errors in the $DIAG/diag/rdbms/xxxxxx/xxxxxx/trace/xxxxxx_ora_3817488.trc file (incident = 1357):
[ORA-00700: soft internal error, arguments: [kgerev1], [600], [600], [700] [] [], [], [], [], [], []]
Incident details in: $DIAG/diag/rdbms/xxxxxx/xxxxxx/incident/incdir_1357/xxxxxx_ora_3817488_i1357.trc
Fri Jul 19 19:51:38 2013
Track of dumping performs id = [cdmp_20130719195138]
Please let me know how to proceed further.
Thanks and greetings
Venkata Sainaba
Hello
Check the paths of the library ($LIBPATH = $ORACLE_HOME/lib LD_LIBRARY_PATH = $ORACLE_HOM/lib: $ORACLE_HOME/lib32) and the compatibility parameter set to 11.1.0.0 and begin the upgrade. This should solve the problem.
RGS
YVS
Maybe you are looking for
-
A Firefox help page appears for a while and is then wiped away, in FF4RC
I go to the Firefox Help Page "Look at a video in Firefox without a plugin", and the content of the body appears for a few moments (on my Vista laptop) and then disappears, leaving only the title, the line of contributors, a block of white space, the
-
Out of memory trying to stream sports to BT for the Smart TV 32RL958
I seek to disseminate BT Sport on TV and get a message "memory" while loading the home page still is. Any suggestions?
-
My laptop was turned off and he was on charging for two hours, when I checked my mobile after two hours of mobile was and brightness was weak and it is on the record, but mobile has been locked, no one touches my mobile, how is that possible? Is it p
-
Win7 (Home Premium) cannot start after "important update"
I just bought a new PC with Windows 7 Home Premium pre-installed. After an update that Win7 launch is no longer, instead the PC reboots from the BIOS. Now, as I write to you from my old XP system, I do that I can't do this post shouldn't indicate tha
-
8570W: 8570W does not powerup on docking station.
I have a 8570W with an A7e36AA docking station. I used to work perfectly. Recently, I don't know what changed, I can not power on the base and the notebook. When press the power switch on the docking station, it lights up, and between 2 and 8 seconds