Oracle 12 c (12.1.0.1): joint audit with audit_trail = XML mode, no check XML file generated

Hello

Working on a new installation of Oracle 12 c EE (12.1.0.1) in RHEL 6.5 environment: joint audit mode (unified audit trail is turned on) and audit_trail = XML.

However, no verification of the XML files are generated in audit_file_dest.  What additional configuration is required to use audit_trail = XML in joint audit mode?

Hello

If you enable audit unified, that is no longer the mixed mode, mixed mode, that's what you get by default, once you enable the unified audit all audit records will share the internal unified audit trail and xml audit is no longer works (essentially audit_trail parameter is ignored).

Greetings,

Damage ten Monkshood

Tags: Database

Similar Questions

  • Error when running a page in J Developer - java.io.IOException: C:\JDeveloper10g\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\server.xml

    Hello

    In J Developer a strange error happens when I try to run any page yesterday.

    I don't know what happened and how do I fix this

    Can someone please help me what to do?

    Screenshot below shows the dialog box when opening the developer J (10.1.3.3)

    Capture.PNG

    Here is the error when running a page,

    java.io.IOException: C:\JDeveloper10g\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\server.xml

    at oracle.jdeveloper.xml.DomIO.loadImpl(DomIO.java:128)

    at oracle.jdeveloper.xml.URLDomIO.load(URLDomIO.java:21)

    at oracle.jdeveloper.xml.BindingIO.load(BindingIO.java:43)

    at oracle.jdeveloper.xml.BindingIO.load(BindingIO.java:37)

    at oracle.jdeveloper.xml.oc4j.Oc4jConfigAdmin.getServerConf(Oc4jConfigAdmin.java:227)

    at oracle.jdeveloper.xml.oc4j.Oc4jConfigAdmin.getRmiServerURL(Oc4jConfigAdmin.java:978)

    at oracle.jdeveloper.xml.oc4j.Oc4jConfigAdmin.getRmiServer(Oc4jConfigAdmin.java:1002)

    at oracle.jdevimpl.runner.oc4j.Oc4jZombieUtil.okToProceed(Oc4jZombieUtil.java:38)

    at oracle.jdevimpl.runner.oc4j.Oc4jStarter.preStart(Oc4jStarter.java:614)

    at oracle.jdevimpl.runner.oc4j.Oc4jStarter.start(Oc4jStarter.java:269)

    at oracle.ide.runner.RunProcess.startTarget(RunProcess.java:830)

    at oracle.jdeveloper.runner.JRunProcess.startTarget(JRunProcess.java:473)

    at oracle.jdevimpl.runner.run.RunningProcess.startTarget(RunningProcess.java:76)

    to oracle.ide.runner.RunProcess$ $2 1.run(RunProcess.java:768)

    at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)

    at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)

    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)

    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)

    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)

    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)

    at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

    Caused by: oracle.xml.parser.v2.XMLParseException: start of the element root waited.

    at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)

    at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:341)

    at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)

    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:292)

    at oracle.jdeveloper.xml.DomIO.loadImpl(DomIO.java:115)

    ... more than 20

    java.io.IOException: C:\JDeveloper10g\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\server.xml

    at oracle.jdeveloper.xml.DomIO.loadImpl(DomIO.java:128)

    at oracle.jdeveloper.xml.URLDomIO.load(URLDomIO.java:21)

    at oracle.jdeveloper.xml.BindingIO.load(BindingIO.java:43)

    at oracle.jdeveloper.xml.BindingIO.load(BindingIO.java:37)

    at oracle.jdeveloper.xml.oc4j.Oc4jConfigAdmin.getServerConf(Oc4jConfigAdmin.java:227)

    at oracle.jdeveloper.xml.oc4j.Oc4jConfigAdmin.getHttpWebSiteConf(Oc4jConfigAdmin.java:359)

    at oracle.jdeveloper.xml.oc4j.Oc4jConfigAdmin.getHttpPort(Oc4jConfigAdmin.java:1125)

    at oracle.jdevimpl.runner.oc4j.Oc4jPortConflictUtil.acquirePorts(Oc4jPortConflictUtil.java:58)

    at oracle.jdevimpl.runner.oc4j.Oc4jStarter.preStart(Oc4jStarter.java:622)

    at oracle.jdevimpl.runner.oc4j.Oc4jStarter.start(Oc4jStarter.java:269)

    at oracle.ide.runner.RunProcess.startTarget(RunProcess.java:830)

    at oracle.jdeveloper.runner.JRunProcess.startTarget(JRunProcess.java:473)

    at oracle.jdevimpl.runner.run.RunningProcess.startTarget(RunningProcess.java:76)

    to oracle.ide.runner.RunProcess$ $2 1.run(RunProcess.java:768)

    at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)

    at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)

    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)

    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)

    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)

    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)

    at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

    Caused by: oracle.xml.parser.v2.XMLParseException: start of the element root waited.

    at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)

    at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:341)

    at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)

    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:292)

    at oracle.jdeveloper.xml.DomIO.loadImpl(DomIO.java:115)

    ... more than 20

    I guess BC4J Server is not running.

    Please help me.

    Had to extract the patch again and run the new developer,

    Old data of projects migrated to this new folder, then it is running

  • Load the XML file into Oracle external Table


    I load the data from the XML file into an intermediate table Oracle using external Tables.

    Let's say below, it is my XML file

    < header >
    < A_CNT > 10 < / A_CNT >
    < E_CNT > 10 < / E_CNT >
    < AF_CNT > 10 < / AF_CNT >
    < / header >
    < student >
    <>students-details
    < Student_info >
    < Single_Info >
    < ID > 18 / < ID >
    New York < City > < / City >
    < country > United States < / country >
    < Name_lst >
    < Student_name >
    Samuel < name > < / name >
    Paul < Last_name > < / Last_name >
    < DOB > 19871208 < / DOB >
    Aware of < RecordStatus > < / RecordStatus >
    < / Student_name >
    < Student_name >
    Samuel < name > < / name >
    Paul < Last_name > < / Last_name >
    < DOB > 19871208 < / DOB >

    < TerminationDt > 20050812 < / TerminationDt >
    History of < RecordStatus > < / RecordStatus >
    < / Student_name >
    < / Name_lst >
    < Personal_Info >
    <>men < / Type >
    < 27 > < / Age >
    < / Personal_Info >
    < / Single_Info >
    < / Student_info >

    < student - register >
    class < A >
    < info >
    < detail >
    < ID student > 18 < / student >
    EE < major > < / Major >
    < course-Grades >
    < course > VLSI < / course >
    < degree > 3.0 < / Grade >
    < / course-Grades >
    < course-Grades >
    < course > nanotechnology < / course >
    < degree > 4.0 < / Grade >
    < / course-Grades >
    < / details >
    < detail >
    < ID student > 18 < / student >
    THIS < major > < / Major >
    < / details >
    < / info >
    class < A >
    < Student_Enrol >
    <>students-details
    < student >

    I load this XML data file into a single table using an external Table. Could someone help me please with coding.

    Thank you

    Reva

    Could you please help me how to insert my XML content into that.

    Same as before, try a plain old INSERT:

    insert into xml_pecos

    values)

    XmlType (bfilename ('XML_DIR', "test.xml"), nls_charset_id ('AL32UTF8'))

    );

    But you'll probably hit the same limitation as with the binary XMLType table.

    In this case, you can use FTP to load the file as a resource in the XML DB repository.

    If the XML schema has been registered with the hierarchy enabled then the file will be automatically inserted into the table.

    Could you post the exact statement that you used to save the scheme?

    In the meantime, you can also read this article, I did a few years ago, it covers the XML DB features that may be useful here, including details on how to load the file via FTP:

    https://odieweblog.WordPress.com/2011/11/23/Oracle-XML-DB-a-practical-example/

    And documentation of the course: http://docs.oracle.com/cd/E11882_01/appdev.112/e23094/xdb06stt.htm#ADXDB4672

  • All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

    All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

    Script launched in until OS user 'A' on the 'A' server which launches sqlplus, then connects to a remote database through a service of tnsnames.ora as another user of the database and the results of this script are spoulées on the server "A".

    The file queued on the old server is written with rw-rw-r: read write user, group read the writing, reading and possession header that is the user of the OS. The file queued on the new server is written to rw-r-r user: reading writing, reading group, public reading and ownership oracle: dba.

    "" The user then has no privileges to modify the file and continue the process of transmitting the file, editing and deleting the file for the next set of commands. This allows us to keep the possibility to migrate to the new server we are unable to process orders.

    $ORACLE_HOME/bin/sqlplus - s user/password@prd1 @./script/CustomScript/R12_OM_UFPC-oracle.sql

    Background: old server running 4.8, Oracle 10.2.0.4 OEL

    New server running OEL 6.5, Oracle 11.2.0.4

    Tested so far:

    File and update umask to 0002 instead of 0022 is now generated as rw-r-r. However, the property is still oracle: dba.

    Update of ownershipt of $ORACLE_HOME/bin/oracle.exe of oracle: oracle (edi added the user to the oracle group) and chmod 6751 oracle.exe. This created several problems where crucial scripts, that is to say of sqlplus failed to run.

    Added! chmod 755 output.file.name - OS user 'A' is not allowed to change to mod.

    Added! command cp MV output file and that generated the file as a user of the operating system: oracle. It is a potential work around in case of emergency, but the developer would have to rewrite the countless scripts.

    Any ideas?

    I have reproduced the behavior of the old server and am able to spool a file via sqlplus under OS user. No changes have been made on the remote database server. All the changes have been on the new server hosting a small 11.2.0.4 database on a server running OEL 6.5 32 - bit OS.

    (1) removed the sticky bit $ORACLE_HOME/bin/sqlplus using chmod u-s, g-s, o - s suggestion of Billy ~ Verreynne

    (2) modified the main group for the 'oracle' user match the user operating system applications, while maintaining membership in the groups 'oracle' and 'dba '.

    -We are dealing with here EDI processes, so the Group was called edi.

    (3) modified property of the files tnsnames.ora and listener.ora for oracle: edi

    (4) restart the receiver

    (5) disconnect / reconnect

    Script runs as expected, the output file contains the correct ownership and permissions.

    Thank you all for taking a look and offering options.

    -Josh

  • Generate the XML file with elements and attributes in table Oracle

    Hello

    I have the following table structure.

    CREATE TABLE SPOOL
    (
    COIL_ID NUMBER (10),
    COIL_NUMBER VARCHAR2 (40),
    COIL_PO_OPERATING_UNIT VARCHAR2 (20).
    COIL_PO_NUMBER VARCHAR2 (40),
    MILL_NUMBER VARCHAR2 (2),
    MILL_COIL_STATUS VARCHAR2 (15).
    ITEM_NUMBER VARCHAR2 (40),
    COIL_WEIGHT NUMBER (38),
    WEIGHT_UOM VARCHAR2 (10),
    DOCUMENT_NUMBER VARCHAR2 (40),
    DATE OF DOCUMENT_DATE,
    DOCUMENT_STATUS VARCHAR2 (15).
    DOCUMENT_TYPE VARCHAR2 (20).
    DOCUMENT_SOURCE VARCHAR2 (20).
    TEST_ID NUMBER (38),
    NUMBER VALUE,
    TEST_UOM VARCHAR2 (20).
    TEST_STATUS VARCHAR2 (70).
    TESTER_LOGIN VARCHAR2 (20).
    EQUIPMENT_CODE VARCHAR2 (50).
    DOC_STS_MSG VARCHAR2 (600)
    )
    /
    For each record COILID, there could be several folders baased on TEST_ID/VALUE/TEST_UOM etc.

    And I would like to prepare the xml file in the following format by selecting data in the COIL?


    <? XML version = "1.0"? >
    -coil xsi: noNamespaceSchemaLocation = "www.tempel.com/COIL.xsd" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xmlns:xdb = "http://xmlns.oracle.com/xdb" >
    < CoilId > 1419532 < / CoilId >
    < CoilNo > D2221050010A0 < / CoilNo >
    Changzhou < CoilPOOperatingUnit > < / CoilPOOperatingUnit >
    < CoilPONo > 4619 < / CoilPONo >
    < MillNo > 86 < / MillNo >
    Test of < MillCoilStatus > < / MillCoilStatus >
    C5 050FP800 < ItemNo > < / ItemNo >
    < weight > 7076 < / weight >
    KILOGRAM of < GLU > < / UDM >
    < DocumentNo > 0 < / DocumentNo >
    < DocumentDate > 2013 - 01 - 11 < / DocumentDate >
    < DocumentStatus > not < / DocumentStatus >
    < DocumentType > test < / DocumentType >
    CHIGMA1 < DocumentSource > < / DocumentSource >
    < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.4992" TestUnit = "mm" Status = 'NonProcessed' TestId = "135" / >
    < test DocStsMsg = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.0128" TestUnit = "mm" Status = 'NonProcessed' TestId = "124" / >
    < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "12" TestUnit = "mm" Status = 'NonProcessed' TestId = "125" / >
    < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.5095" TestUnit = "mm" Status = 'NonProcessed' TestId = "127" / >
    < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.5042" TestUnit = "mm" Status = 'NonProcessed' TestId = "128" / >
    < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.5058" TestUnit = "mm" Status = 'NonProcessed' TestId = "129" / >
    < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.4967" TestUnit = "mm" Status = 'NonProcessed' TestId = "130" / >
    < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.5049" TestUnit = "mm" Status = 'NonProcessed' TestId = "131" / >
    < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.4972" TestUnit = "mm" Status = 'NonProcessed' TestId = "132" / >
    < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.4960" TestUnit = "mm" Status = 'NonProcessed' TestId = "133" / >
    < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.4996" TestUnit = "mm" Status = 'NonProcessed' TestId = "134" / >
    < / reel >

    Can you please guide me how to do it in a single query?

    Thanks in advance.

    Function EXTRACT will force a print in your version:

    SELECT XMLElement("Coil",
         XMLAttributes(
           'http://www.w3.org/2001/XMLSchema-instance' as "xmlns:xsi"
         , 'www.tempel.com/COIL.xsd' as "xsi:noNamespaceSchemaLocation"
         )
       , XMLForest(
           COIL_ID                as "CoilId"
         , COIL_NUMBER            as "CoilNo"
         , COIL_PO_OPERATING_UNIT as "CoilPOOperatingUnit"
         , COIL_PO_NUMBER         as "CoilPONo"
         , MILL_NUMBER            as "MillNo"
         , MILL_COIL_STATUS       as "MillCoilStatus"
         , ITEM_NUMBER            as "ItemNo"
         , COIL_WEIGHT            as "Weight"
         , WEIGHT_UOM             as "UOM"
         , DOCUMENT_NUMBER        as "DocumentNo"
         , DOCUMENT_DATE          as "DocumentDate"
         , DOCUMENT_STATUS        as "DocumentStatus"
         , DOCUMENT_TYPE          as "DocumentType"
         , DOCUMENT_SOURCE        as "DocumentSource"
         )
       , XMLAgg(
           XMLElement("Tests",
             XMLAttributes(
               DOC_STS_MSG    as "DocStsMsg"
             , EQUIPMENT_CODE as "EquipmentCode"
             , TESTER_LOGIN   as "TesterLogin"
             , VALUE          as "Value"
             , TEST_UOM       as "TestUnit"
             , TEST_STATUS    as "Status"
             , TEST_ID        as "TestId"
             )
           )
         )
       ).extract('/*')
FROM coil
GROUP BY COIL_ID
       , COIL_NUMBER
       , COIL_PO_OPERATING_UNIT
       , COIL_PO_NUMBER
       , MILL_NUMBER
       , MILL_COIL_STATUS
       , ITEM_NUMBER
       , COIL_WEIGHT
       , WEIGHT_UOM
       , DOCUMENT_NUMBER
       , DOCUMENT_DATE
       , DOCUMENT_STATUS
       , DOCUMENT_TYPE
       , DOCUMENT_SOURCE ;

  • How can I parse the XML file using the Oracle's Sql query.

    Hi all
    I have an XML file that must analyze and display the result according to the following example
    Can you please recommend me an approach to get the result.

    For example, here is my XML:

    <? XML version = "1.0" encoding = "UTF-8"? >
    < xmlns:pi = "urn:com.workday / picof pi: Extract_Employees" >
    < IP: employee >
    < Additional_Information: pi > < pi: pi function: PriorValue = "" > Intern - masteri¿½s < / pi: function >
    < / pi: Additional_Information >
    < / pi: employee >
    < / pi: Extract_Employees >

    Databases:

    Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - production

    SQL > SELECT * FROM NLS_DATABASE_PARAMETERS;

    NLS_LANGUAGE AMERICAN
    NLS_TERRITORY AMERICA
    NLS_CURRENCY $
    NLS_ISO_CURRENCY AMERICA
    NLS_NUMERIC_CHARACTERS.,.
    WE8ISO8859P1 NLS_CHARACTERSET
    NLS_CALENDAR GREGORIAN
    NLS_DATE_FORMAT DD-MON-RR
    NLS_DATE_LANGUAGE AMERICAN
    NLS_SORT BINARY
    NLS_TIME_FORMAT HH.MI. SSXFF AM
    NLS_TIMESTAMP_FORMAT-DD-MON-RR HH.MI. SSXFF AM
    NLS_TIME_TZ_FORMAT HH.MI. SSXFF AM TZR
    NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI. SSXFF AM TZR
    NLS_DUAL_CURRENCY $
    BINARY NLS_COMP
    NLS_LENGTH_SEMANTICS BYTES
    NLS_NCHAR_CONV_EXCP FAKE
    NLS_NCHAR_CHARACTERSET AL16UTF16
    NLS_RDBMS_VERSION 10.2.0.3.0



    The Xml file above with UTF-8 character sets which is multi bytes.

    But in my character database is WE8ISO8859P1 for example ISO-8859-1 (single-byte character set)

    SQL > SELECT extractValue (Value (x) ', ' / pi:Employee/pi:Additional_Information/pi:Job_Title','xmlns:pi="urn:com.workday/picof ' ')
    TABLE (XMLSequence (extract (XMLType (bfilename('XMLDIR','XML_Issue_227176.xml'), nls_charset_id ('AL32UTF8')),'/ pi: Employee ',' xmlns:pi="urn:com.workday/picof"'))) x;)))


    which gives the following error:

    Error:
    ORA-31011: XML parsing failed
    ORA-19202: an error has occurred in the processing of XML
    LPX-00200: could not convert from UTF-8 encoding to ISO-8859-1
    Error on line 1
    ORA-06512: at "SYS." XMLTYPE", line 295
    ORA-06512: at line 1

    Also I tried with this
    SQL > SELECT convert (extractValue (Value (x), ' / pi:Employee/pi:Additional_Information/pi:Job_Title','xmlns:pi="urn:com.workday/picof"'),'WE8ISO8859P1 ', 'UTF8'))
    TABLE (XMLSequence (extract (XMLType (bfilename('XMLDIR','XML_Issue_227176.xml'), nls_charset_id ('AL32UTF8')),'/ pi: Employee ',' xmlns:pi="urn:com.workday/picof"'))) x;)))

    The same error is according to the above error message.

    Please help in this regard.

    Thank you and best regards,
    Sandrine

    You know the code of real character behind "" or you receive the file like that?

    For the record, "" is the wildcard of UTF-8 (0xEFBFBD), so that the original character of the means has already been replaced and that very probably the file was not coded properly in the first place.

    With respect to the resolution of the problem, try another method to read the file:

    SQL> select value from nls_database_parameters where parameter = 'NLS_CHARACTERSET';

VALUE
----------------------------------------
WE8ISO8859P15

SQL> SELECT x.*
  2  FROM XMLTable(
  3         XMLNamespaces(default 'urn:com.workday/picof')
  4       , '/Extract_Employees/Employee'
  5         passing xmltype(
  6                   dbms_xslprocessor.read2clob(
  7                     'COP_DIR'
  8                   , 'XML_Issue_227176.xml'
  9                   , nls_charset_id('AL32UTF8')
 10                   )
 11                 )
 12         columns job_title varchar2(30) path 'Additional_Information/Job_Title'
 13       ) x
 14  ;

JOB_TITLE
------------------------------
Intern -  Master¿s

  • How to import the XML file into an oracle table using a BPEL process

    Hi friends

    How can I import XML file in the db oracle table using a BPEL process

    (1) I have generated an XML file in my local system with a field
    (2) I created a temporary table in my oracledb with the same field in the XML file
    (3) that I want to import these XML files which is the local host to my db oracle using a BPEL process
    (4) for that what steps should I me fallow please suggest me if there is no document for this?

    Thanks in advance
    AT

    Hi to

    Here you go...

    http://blogs.Oracle.com/ajaysharma/2011/03/using_file_adapter_database_adapter_and_mediator_component_in_soa_11g.html

    I hope that helps!

    Thank you
    AJ

  • Creating Oracle's XML files in a directory

    Hi all

    I was going through the concepts Oracle XMLDB and discovered that we can create an XML file using the instructions normal select.

    Now, I create an Oracle Directory that points to the remote Unix computer.

    I want to know if we can create this XML file in the directory that points to the remote Unix directory.

    I don't want to use here the concepts of coil or UTL_FILE.


    Receive your answer on that.

    Thank you
    Madhu K.

    I'm not sure of your condition. However, here are a few example file writing Oracle's XML to disk.

    SQL> drop table test_clob;

Table dropped.

SQL> CREATE TABLE test_clob (id INTEGER,clob_col CLOB);

Table created.
SQL> ed
Wrote file afiedt.buf

  1  INSERT INTO test_clob VALUES(1,'
  2  
  3  
  4  AAA
  5  godknows
  6  xyz
  7  
  8  
  9  BBB
 10  something
 11  zbc
 12  
 13  
 14  CCCC
 15  whoknows
 16  mon
 17  
 18* ')
SQL> / 

1 row created.

SQL> commit;

Commit complete.

SQL> DECLARE
  2   v_xml                 XMLTYPE ;
  3    v_doc                 XMLDOM.DOMDocument;
  4    v_dir                 VARCHAR2(2000);
  5    v_file                VARCHAR2(2000);
  6  BEGIN
  7    v_dir := 'TEST_DIR';
  8    v_file := 'emp.xml'; -- name of the output file
  9    SELECT xmltype(clob_col)
 10    INTO v_xml
 11    FROM test_clob
 12    WHERE id=1;
 13    v_doc := DBMS_XMLDOM.NEWDOMDOCUMENT(v_xml);
 14    DBMS_XMLDOM.WRITETOFILE(v_doc, v_dir||'\'||v_file, 'UTF-8');
 15    DBMS_XMLDOM.FREEDOCUMENT(v_doc);
 16  END;
 17  / 

PL/SQL procedure successfully completed.

SQL>

    - and the generated file:

    C:\>type emp.xml


  
    AAA
    godknows
    xyz
  
  
    BBB
    something
    zbc
  
  
    CCCC
    whoknows
    mon
  


C:\>

    Another way:

    ---------------------------------------------------------
SQL> DECLARE
  2    v_clob   CLOB := EMPTY_CLOB;
  3    v_amount INTEGER;
  4    /*** Curtesy to odie_63 ***/
  5    CURSOR cur_crl IS
  6      SELECT xmltype(response_file, nls_charset_id('CHAR_CS')).getclobval() rfile
  7               FROM clarity_response_log;
  8   /***************/
  9  BEGIN
 10    dbms_lob.createtemporary(v_clob, TRUE);
 11    FOR i IN cur_crl LOOP
 12      v_amount := DBMS_LOB.GETLENGTH(i.rfile);
 13      Dbms_LOB.WRITEAPPEND(v_clob, v_amount, i.rfile);
 14      v_amount := DBMS_LOB.GETLENGTH(CHR(10));
 15      Dbms_LOB.WRITEAPPEND(v_clob, v_amount, CHR(10)); --This is for Line break.
 16    END LOOP;
 17
 18    DBMS_XSLPROCESSOR.CLOB2FILE(cl      => v_clob,
 19                                flocation => 'TEST_DIR',
 20                                fname     => 'response.xml',
 21                                csid      => 0);
 22  END;
 23  / 

PL/SQL procedure successfully completed.

SQL>

  • Load the XML file into oracle DB using OWB

    Hi friends,

    I'm new XML data.
    I had a requirememnt to load the xml file into an oracle table.
    Can someone procedure to load the data.

    Thanks in advance

    see this

    http://blogs.Oracle.com/warehousebuilder/2007/09/leveraging_xdb.html

  • XML for the interface Oracle even insert County regardless of input XML file

    Do not know how to get around this one... I have an interface that simply transfers the contents of an XML file into an Oracle table. I get the same count insert and documents regardless of the XML file that I use.

    I used a property with this file, but then just decided to use memory to process the file. So, in the physical architecture of the topology XML object, I simply specify the name of the file, xsd and the schema.

    Any thoughts on what's going on / what to check?

    try adding dod = true (Drop on logout) to the XML server in the topology Manager.
    This happens due to the fact that XML driver does not release the contents of the XML in memory. You must restart the agent to get the updated data.

  • Problem with the date when you load the XML file into Oracle Database 10g

    Hi all

    I have the interface as shown in the screenshot below. In this document, among other things, I am mapping to an element XML file representing a date to an Oracle table column defined as DATE. The source and target columns are highlighted in the screenshot.

    ! http://img223.imageshack.us/img223/1565/odiscr275.jpg!

    When I run the interface, I get the following error message:

    java.lang.IllegalArgumentException to java.sql.Date.valueOf(Date.java:103)

    I guess that this is the conversion of the date!

    I already tried to replace SRC_TRADES. DEAL_DATE with TO_DATE (SRC_TRADES. DEAL_DATE, ' DD/MM/YYYY') on the implementation tab. This feature was not recognized when I executed the interface, so it did not work! The value of date in the XML file is in the format DD/MM/YYYY .

    I guess that Date SQL Oracle functions do not work in the implementation tab. Could someone let me know:

    1. what the Date Conversion function I could use instead?
    2. where can I find a reference to the methods/functions that I use in the implementation tab (if such a reference exists)?

    See you soon.

    James

    Hello.

    Try changing the area of execution at the staging area. Once you change it, write in the map box just SRC_TRADERS. DEAL_DATE. When you use TO_DATE, the source field typu should be varchar2, no date (as it is in store for your data source)

  • Export Oracle database tables in an XML file?

    Hello. (I use JDev 10.1.3.3.0)

    I have an oracle database. I want to know if there is an easy way to put the data in this table in an xml file that looks a little like this:

    < table name >
    < name of column 1 > it is data < / name of the column of 1 >
    more columns here
    ...
    < / table name >

    I know not how I would do it manually, but I was wondering if there is a faster solution.

    Thank you.

    http://download.Oracle.com/docs/HTML/B25947_01/bcadvvo007.htm#sm0338

  • JOINT-2 flow in Bypass Mode?

    HI, I have documentation cisco joint-2 a 500Mbps flow in inline mode and the throughput of 600Mbps in passive.so guess our ihsane-2's in inline mode, then if we put our joint-2 in Bypass mode, how traffic joint-2 can handle without any inspection? (flow)?

    Thank you.

    The JOINT-2 would be only supported to the same 500Mbps for inspection and by-pass.

    There is not a separate ByPass mode ranking.

    Having said that, the JOINT-2 will be much higher than 500Mbps in ByPass mode (assuming that nothing else on the sensor).

    But I don't know how much of more since don't usually test us the performance in ByPass mode.

    You wouldn't want to plan your network on the performance of ByPass capacity.

    The other reason is that when the sensor bypass there will be something else in the sensor.

    In the case of an update of the Signature, there will be a treatment of signing consuming much of the CPU and memory for ByPass will not perform to its peak performance.

  • Groups on a joint network with Server 2003, Windows 7 and XP

    I have a network of small business running off an old server running Windows server 2003.  The workstations are 7 machines of Windows 7 and XP 3.  I would set up a group to easily share files not related to the common programme currently running on the server as well as share printers more easily, but have een advised by an "expert" do not do, as it network program (medical office) my will suffer. Including the old labels dymo and lexmark printer sharing is a pain though it might be easier thanks to the homegroup.  I should have updated the drivers on all computers by using the printers or only those connected via usb? If I need to change the workgroup name? I know that XP machines cannot participate in the home group, but we can work around this problem.

    The bottom line is that homegroup can be used with Windows 7 computers. You must set up a joint working group to share files/printers between the XP Win 7 machines. Insofar as the server running W2K3 domain?

    http://Windows.Microsoft.com/en-us/Windows7/help/sharing-files-and-printers-with-different-versions-of-Windows

    For W2K3 networks I suggest posting on the TechNet forums...

    http://social.technet.Microsoft.com/forums/en/winserverPN/threads

  • ORA-01034: ORACLE not available ORA-27101: Kingdom is no Linux-x86_64 shared memory error: 2: no such file or directory process ID: ID of Session 0: 0 serial number: 0

    Hello

    In our society, we have oracle server on Suse Linux with two instances TETA and TETA201.

    One day on a server broke down, because there is no free space due growing files 'archivelog.

    After that I manually deleted several older archivelog files, but after the reboot, the server error occurs when connecting to the database:

    "ERROR:

    ORA-01034: ORACLE not available

    ORA-27101: shared memory realm does not exist

    Linux x86_64 error: 2: no such file or directory

    Process ID: 0

    "Session ID: serial number 0: 0"

    $ ORACLE_SID is set to TETA, if export it to TETA201 connection works correctly

    Oracle service startup there is no errors but only one instance is running TETA201 works correctly

    #############################################################################

    # Beginning of start O R A C L E section #.

    #############################################################################

    PARAMETERS from/etc/sysconfig/oracle

    -Set the Oracle kernel settings: Yes

    -Start the Oracle Listener: Yes

    -Start the Oracle database: Yes

    -Start the Oracle Web server: no

    -Start Oracle EManager: Yes

    -Start Oracle iSQLPLUS Manager: Yes

    -Start Oracle Agent: no

    -Start Oracle Internet Filesystem: no

    -Run Oracle Directory Manager: no

    Can not find required file: isqlplusctl - START_ORACLE_DB_ISQLPLUS setting = no

    Undefinied Agent Oracle or not properly configured. Please check.

    Setting the parameters of the kernel for Oracle, see the file

    / etc/sysconfig/Oracle of explanations.

    Shared memory: SHMMAX = SHMMNI(5) 3294967296 = 4096 SHMALL 2097152 =

    Semaphore values: SEMMSL = 1250 SEMMNS = 32000 SEMOPM = 100 SEMMNI = 256

    Other values: FILE_MAX_KERNEL = 131072 IP_LOCAL_PORT_RANGE = 1024 65000

    RMEM_DEFAULT = 4194304 WMEM_DEFAULT = 262144 = 4194304 = 262144 WMEM_MAX RMEM_MAX

    Huge pages:

    ULIMIT values: MAX_CORE_FILE_SIZE_SHELL = unlimited

    FILE_MAX_SHELL = 65536 = 16384 PROCESSES_MAX_SHELL

    Kernel defined for Oracle parameters: fact

    -Start listener... done

    + From databases...

    Start entry for SID TETATEST to /oracle/product/11.2.0/dbhome_1/ inskippedratab

    Database instance "TETA" of treatment: save the /oracle/product/11.2.0/dbhome_2/startup.log file

    Instance of database 'TETA201' of treatment: save the /oracle/product/11.2.0/dbhome_1/startup.log file

    Status of Oracle database start: fact

    -Starting Apache... unused

    -From unused application server

    -From Application Server Console... unused

    -Start of Agent... unused

    -From Enterprise Manager...

    DB console departure for TETA starting DB Console for TETA201 done

    -Jumped from iSQLPLUS Manager...

    -From... unused Oracle Internet file system

    -From Oracle Internet Directory... unused

    #############################################################################

    # End of O R A C L E section #.

    #############################################################################

    #############################################################################

    # End of O R A C L E section #.

    #############################################################################

    /Oracle/product/11.2.0/dbhome_1/startup.log


    SQL * more: Production of the version 11.2.0.3.0 on Mon Jan 18 11:43 2016

    Copyright (c) 1982, 2011, Oracle.  All rights reserved.

    SQL > Polaczono.

    SQL > ORACLE Instancja zostala zamknieta.

    SQL > Odlaczono od Oracle Database 11g Release 11.2.0.3.0 - 64 bit Production

    SQL * more: Production of the version 11.2.0.3.0 on Mon Jan 18 11:43:01 2016

    Copyright (c) 1982, 2011, Oracle.  All rights reserved.

    SQL > connect to an idle instance.

    SQL > ORACLE instance started.

    Total System Global Area 1043886080 bytes

    Bytes of size 2234960 fixed

    603981232 variable size bytes

    432013312 of database buffers bytes

    Redo buffers 5656576 bytes

    Baza danych zostala zamontowana.

    Baza danych zostala otwarta.

    SQL > Odlaczono od Oracle Database 11g Release 11.2.0.3.0 - 64 bit Production

    /Oracle/product/11.2.0/dbhome_2/bin/DBSTART: warm welcome of the instance 'TETA201' database has started.

    /Oracle/product/11.2.0/dbhome_2/startup.log


    PON sty 18 11:42:52 THIS 2016

    SQL * more: Production of the version 11.2.0.4.0 on Mon Jan 18 11:42:52 2016

    Copyright (c) 1982, 2013, Oracle.  All rights reserved.

    SQL > connect to an idle instance.

    SQL > ORACLE instance started.

    Total System Global Area 4175568896 bytes

    Bytes of size 2259840 fixed

    1409287296 variable size bytes

    2751463424 of database buffers bytes

    Redo buffers 12558336 bytes

    Baza danych zostala zamontowana.

    ORA-03113: end of file on communication channel

    Māju ID: 10080

    Sesji ID: 33, serial number: 3

    SQL > Odlaczono od Oracle Database 11g Release 11.2.0.4.0 - 64 bit Production

    /Oracle/product/11.2.0/dbhome_2/bin/DBSTART: hot "TETA" database instance started.

    Linux: ~ # service oracle State

    #############################################################################

    # Begin State O R A C L E section #.

    #############################################################################

    Kernel parameters

    Shared memory: SHMMAX = SHMMNI(5) 3294967296 = 4096 SHMALL 2097152 =

    Semaphore values: SEMMSL, SEMMNI, SEMMNS, SEMOPM: 1250 32000 100 256

    Database Instances

    TETA instance is out of service (autostart: Y)

    Instance of TETATEST is broken (autostart: N)

    TETA201 of the instance is declining (autostart: Y)

    AMT-listener: to the top

    Webserver (Apache httpd): low (0 process)

    List of processes by user oracle:

    PID TTY STAT TIME COMMAND

    9855?        SSL 0:00 /oracle/product/11.2.0/dbhome_2/bin/tnslsnr LISTENER

    10128?        SS 0:00 ora_pmon_TETA201

    10130?        SS 0:00 ora_psp0_TETA201

    10132?        SS 0:00 ora_vktm_TETA201

    10136?        SS 0:00 ora_gen0_TETA201

    10138?        SS 0:00 ora_diag_TETA201

    10140?        SS 0:00 ora_dbrm_TETA201

    10142?        SS 0:00 ora_dia0_TETA201

    10144?        SS 0:00 ora_mman_TETA201

    10146?        SS 0:00 ora_dbw0_TETA201

    10148?        SS 0:00 ora_lgwr_TETA201

    10150?        SS 0:00 ora_ckpt_TETA201

    10152?        SS 0:00 ora_smon_TETA201

    10154?        SS 0:00 ora_reco_TETA201

    10156?        SS 0:00 ora_mmon_TETA201

    10158?        SS 0:00 ora_mmnl_TETA201

    10166?        SS 0:00 ora_qmnc_TETA201

    10338?        SS 0:00 ora_cjq0_TETA201

    11195?        SS 0:00 ora_q000_TETA201

    11197?        SS 0:00 ora_q001_TETA201

    #############################################################################

    # End of O R A C L E section #.

    #############################################################################

    Help, please

    RMAN target /.

    RMAN > startup mount;

    RMAN > overlap archivelog all;

    RMAN > delete archivelog expired;

    RMAN > alter database open;

Maybe you are looking for

  • Photos: What is the difference between the title and the description?

    In the new application photos on Mac, it is possible to enter the description and the title to several files. What is the difference? Photos don't do different things with the information provided? Second question: is it possible to get into these IO

  • Portege R400 - does not recognize 3g module?

    Please help: I got my new Toshiba Portege R400 (PPR40E-00T018G3). I knew that some of the R400 is module 3g, but I could not know if my has a or not because there was nothing on the box or it will show or not (except that on the screen Toshiba Edge 3

  • Windows update error: Code 42 b

    Whenever I try to install an update from windows update, I get an error. I tried researching the problem to find a solution, but I can't. It seems there will be no solution. Can you please help. Is the update that I am trying to install Microsoft SQL

  • SendTo shortcuts do not appear in the drop-down list sendto

    I just have to move on to Windows 7 and the drop-down list sendto does not work properly.  I have consulted the folder sendto successfully by the username C:\"Users\Your '\AppData\Roaming\Microsoft\Windows\SendTo.  There are shortcuts and standard de

  • The OFA link

    I need to keep a link on a form OPS page when clicking on which Microsoft outlook must be open to send a mail with a predefined email address. How can we achieve this?