Portege R400 - does not recognize 3g module?

Similar Questions

• Portege 7220 does not recognize the Extension of memory (Kingston)

  Hello

  Recently, I wanted to update my old notebook, Portege 7220 with a 256 MB Stick of Kingston Ram. According to their website, it should work, but the machine does not recognize the memory at all. (just using internal 64 MB).

  I can't upgrade the Bios either, because when I press F12 when the computer starts, it cannot read the floppy drive in the docking station. Do I need a USB floppy drive for that? I tried with a usb key, but it does not work. is there a possibility to redo an update of windows? (Comp running Windows 2000)

  Thanks for your help, much apprechiated.

  Rawnonymous

  > I can't upgrade the Bios either, because when I press F12 when the computer starts, it cannot read the floppy drive in the docking station. Do I need a USB floppy drive for that? I tried with a USB but that doesn't work. Isn't there a possibility to do a windows update? (Comp running Windows 2000)

  Only the TRAD of the BIOS version exists for this Portege.
  This means that you will not be able to update the Windows operating system running, but you will need an external floppy drive to perform these updates.

  Regarding your problem of memory;
  Check this box:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5388&ft=m&St=3

  You can find the compatible memory module. It s a PC100 144 pin SODIMM.

  Maybe you used the not-entirely-compatible module or the module is defective

• Portege 7200 does not recognize external memory

  I downloaded Windows XP on my 7200 Portege (with 256 MB external memory) and it worked fine. All of a sudden it started overheating and has been extremely slow. I reformatted the drive, downloaded XP again and it seems to work well, although slowly;

  However, he refuses to acknowledge the external memory and seems to work with internal memory of 64 MB only.
  Is this a problem of port external memory (hardware) or I can do something to fix this?

  Hello

  You suggested also that the laptop started to overheat.
  As far as I know it is possible that the cooling modules cannot cool the CPU and then the CPU does not work with maximum efficiency.
  You should check you cooling grids for dust and debris.
  You can try to use the vacuum cleaner to clean the fans. But be careful.

  The second possibility is a dysfunction of memory modules.
  Try to test with another.

• Satellite A200-1CR does not recognize the module of RAM 2 GB

  Hello

  I have a problem with the extension of the RAM.
  I have the Satellite A200-1CR with 2 x 512 MB of RAM.

  Now, I bought 1 x 2 GB RAM (DDR2 PC2-5300 (667 MHz); PA3513S-1M2G) but the BIOS and Windows recognizes only 1 GB.
  When I add 1x512mo to the second slot, the system recognizes 1.5 GB of RAM.
  Where is the problem?

  What should I do to make it see 2 GB?

  Paula

  Hello

  I think the answer is very simple.
  Satellite A200-1CR can be upgraded up to 2 GB of RAM.
  This means that you can use max 1 GB of RAM in one slot
  You used 2 GB of RAM and this module does not seem to be compatible
  In my opinion if you want to use 2 GB of RAM then you can buy 2 x 1 GB RAM modules

  Welcome them

• Portege R400 - does not light

  OK, so here is my big problem. When I try to turn on the laptop, it will not but rather the ' plug in light "(as it looks like a plug?). on the front of the laptop orange flashes and the laptop just lights.
  What's wrong?

  Thanks for any help I get.
  Dinoxmaster

  I guess you have a problem with electronic control gear and what you see flashes code.
  Please check this thread on the same subject.

  Unfortunately there is nothing you can do it alone, and the laptop should be controlled by the authorized service provider.

  Bye and good luck

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• Satellite L30-113 does not recognize the two modules DIMM RAM

  Hello

  I have a Toshiba laptop Satellite L30 113.
  It has 512 MB of RAM and therefore struggled to run Windows Vista, so I bought another 1 GB of RAM.
  It's DDR2 553 MHZ (PC4200.

  The problem I have is that the laptop does not recognize both DIMMs, i.e. the old 512 MB and the new 1 GB when they are in the whole PC. I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB. I tried the DIMMs around two ways but without success.

  Did I miss something?
  They should be the same size as in the bad old days?
  What is going on?

  Thank you

  Adam

  > I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB
  Seems that the two RAM modules are not completely compatible...
  I've read several times on these issues and to be honest it s are not uncommon

  I advise you to buy two identical RAM modules ad then to try again

  I'm afraid there is no other solution for your problem of m.

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.

• First does not recognize the video modules.

  First does not recognize the video modules. I have updated the readers without results, also update the bios. All the other adobe products work except the first.

  You have a laptop with dual video?

  -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html

  -http://forums.adobe.com/thread/1001579

  -Use the BIOS http://forums.adobe.com/thread/1019004?tstart=0

  -Why link http://forums.adobe.com/message/4685328

  -HP Fingerprint/password in conflict http://forums.adobe.com/thread/911575

  -Utility from Mac http://forums.adobe.com/thread/1017891?tstart=0

• Portege R700 - recognition of fingerprints does not recognize my fingers

  My recognition of fingerprints has worked for a day about. Now, it does not recognize my fingers (3 registered). When I go in utility prints/utilities-Toshiba digital displays with a fingerprint window Panel, indicating that he needs my fingerprints until I have access to the control panel. It will not accept my footprint so I select to close the window and leaves the control panel.

  When I visit different websites they say it is ready (on a yellow sign) and I keep having to say cancel because I fear it will record and then leaves me not in the Web site.

  It was such a bad experience I just go into the control panel and disable. How do I do that?

  Have you tried to delete saved fingerprints fingerprints?

• Portege Z930-118 does not recognize the external USB CD/DVD drive

  My new Z930-118, with windows 7 64 bit home, does not recognize the external CD/DVD drive when I plug it into the USB port.

  The CD/DVD device does not even appear at all in Device Manager.

  The reader is a SE-S084 Samsun and works well on another laptop.

  I already checked for the "upper_filter", "lower_filter" with the regedit, but entries are not there, so no help.

  Hello
  I m not very well how to help you.

  I found some information about this WEIRD disc and it seems that he didn't need an external power supply. Its USB bus powered so I guess around 500mA power since it is the default value provided by a USB 2.0 port.

  I don t think that there is a problem of missing software. It is a plug n play device so you need to connect it to the USB port and the system should automatically recognise.

  From my point of view of the few you try to connect the external USB ODD two ports to aid a * Y * Cableusb.
  I think the reader needs more power provided by a single USB port.

• Portege M300: Nero 7 Premium does not recognize drive - Mat * un UJDA765

  I am unable to write through Nero 7 premium on my laptop of protected m300.
  Nero 7 premium is not all recognize the dvd/cd rw burner.
  In the drop down menu drives availble to write, only the writer of images is displayed.

  Please help, if anyone knows how to fix the problem.

  I formatted the original installed OS and newly, MS XP sp2.

  It sounds everything works correctly on your laptop computer and the operating system recognizes the drive correctly. But only the Nero application makes some problems.
  Well, it's not easy to say why Nero does not recognize the drive.
  I recommend you to check the Nero Web site.
  You will find many info and tools for additional help.
  For example the infoTool can locate the fault.
  You can also try to use the Nero driver - CleanTool.exe and RegistryChecker.exe

  However, it is a 3rd party apps and I think you should ask for help using Nero.

• Portege Z30 A-1_D_3 does not recognize battery

  my pc did not recognize the State of the battery, with battery report that the PC does not recognize the battery...

  and what exactly happens if you unplug the AC adapter, while the laptop is turned on?
  Stop the laptop?

  You are able to use the laptop without the connection to the power grid?

• Sites Web does not recognize my password or ID. Frustrated

  I try to get into Verizon. It does not recognize my password or ID. Yet, I can go to E or Chrome and I can get very well. In addition, the same problem with an ancestry. It won't let me watch all documents. So darn frustrated. I've been with Firefox for a long time and NOW it has problems. WHY? Please give me a fix because this ole Granny is about to win 10 years with friction.
  Thank you

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  There are other things that need attention.

  Your system details list shows several Flash plugins.

  • Shockwave Flash 18.0 r0
  • Shockwave Flash 19.0 r0

  You can find the installation path of the plugins on the topic: plugins page.

  • http://KB.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins

  You can view the installation folder of Flash player for multiple Flash player plugins and delete older versions of the plugin (NPSWF32) and possibly (re) install the latest Flash Player.

  • (32-bit Windows) C:\Windows\System32\Macromed\Flash\
  • (Windows 64 bit) C:\Windows\SysWOW64\Macromed\Flash\

• Tecra R850-11U does not recognize memory full

  My Tecra R850-11U has 8 GB (2 x 4 GB) memory inside. I am under W7 Professional 64-bit, and the machine shows that 4 GB of memory.

  I've updated the bios, but the bios display also 4GB. I have 2 banks of original samsung memory still a change to a Bank of kingston, but it displays no more than 4 GB.

  How can I solve this problem? I like the full memory

  The chipset supports 8 GB of RAM, so you should be able to use the 8GB.
  But if the BIOS does not recognize the 8 GB of RAM then one of the modules might be faulty or not compatible with another module.

  It is just as well as a plausible explanation for me