Oracle Database 11 g: RAC Administration Release 2 training valid for CMO

Similar Questions

• can I use "Oracle Database 12 c: performance management and Tuning" training for the certification "Oracle Database 11g: Performance Tuning 1Z0-054 '"»

  I took "Oracle Database 12 c: new performance management and Tuning" the oracle University training. Now I would like to get certified on "Oracle Database 11g: Performance Tuning 1Z0-054 ' exam. Is this possible?

  I guess you ask if you can use the course 12 c as long as the condition of course for the review of 11g.  Over 12 c is not listed as one of the options for the 11 g certification and course requirements are normally specific version - at least with DBA certifications.  If you are already an Oracle OCP DBA, of course, there is no requirement of course for the review of performance tuning.  From what I know the training requirements for other certifications, I do not that you will be able to use it. However, Brandye will provide a definitive answer to whether the course 12 c would be acceptable for 11g certification.

  That said, I'm with John - 12 c review is about a community of 85 to 90% in the review of the 11g and is currently about 20% of the price while it is in beta.  What is the point of trying to cross the releases?

• Oracle database 11 g 2 fails to check pre-required for packages

  I try to install Oracle database 11 g 2 for IOM.
  
  But sine qua non, check fails to say some packages failed rpm.
  
  I tried to install these missed packets but not able to do because of dependencies between packages.
  
  Please help me find rpm packages required for the database.

  Check this link for the list of required packages rpm for Oracle database 11 g 2.

  http://www.Oracle-base.com/articles/11g/Oracle-DB-11gr2-installation-on-Oracle-Linux-6.php

  See this link for the Linux installation steps.
  http://kamranagayev.com/2011/03/21/step-by-step-installing-Oracle11g-on-Linux/

• Oracle Database 11 g RAC 2: role of the Public, private, virtual, and SCAN IPs.

  Hi Experts,
  
  1 can you please let me know why we need to set up under IP addresses for the RAC configuration and what is the role that each plays?
  
  
  -Public
  -Private
  -Virtual
  -SCAN
  
  2. What is the relationship between IP SCAN and virtual IPs?
  
  Concerning

  Hello

  859875 wrote:
  Hi Experts,

  1 can you please let me know why we need to set up under IP addresses for the RAC configuration and what is the role that each plays?

  -Public

  Configured before installation for each node and can be resolved at this node before installing.
  Role:
  Enable Virtual/SCAN configuration/communication between the nodes in the cluster. Do not start the Clusterware without public IP Interface/address.
  Virtual/SCAN will work as an alias IP on the public Interface on the Public network.

  -Private or interconnection

  Configured before installation, but on a separate private network, with its own subnet, which is not resolved except by other nodes in the cluster member
  Role:
  Clusterware uses for cluster synchronization (network heartbeat) interconnection and communication of demon among the nodes in the cluster.
  RAC uses the interconnect for cache fusion (UDP) and inter-process communication (TCP).
  Cache Fusion is the remote Oracle buffers, shared memory mapping between the caches of the members of the cluster nodes.

  -Virtual

  Configured before installation for each node, but not currently in use. IP, VIP and treats public SCAN addresses than any other addresses on the same subnet.
  Role:
  The goal is the availability of the applications. If add or remove nodes as your remove VIP client config (with SCAN, it is not necessary)
  When a node fails, the VIP associated with it is automatically failed over to another node.
  Without using VIPs or FAN, clients connected to a node who died often wait a TCP timeout (which can be up to 10 min) before getting an error.
  So, you don't have really a good HA solution without using VIPs and FAN. The best way to use the FAN is to use a client integrated with fast connection failover (FCF) such as JDBC, OCI, or ODP.NET.

  -SCAN

  Three static IP addresses that are configured on the server (DNS) domain names prior to installation so that the three IP addresses are associated with the name provided as the SCAN, and all three addresses are returned in random order by the DNS to the applicant
  Configured prior to installation in the DNS to resolve the addresses that are not currently in use. Addresses on the same subnet than all other IP addresses, addresses VIP and public SCAN
  Role:
  The goal is the availability of the applications before clients establish communication with CARS and make the whole of the Cluster completely transparent.
  IP SCANNER is a new 'layer' (oracle) with high availability network that allows to modify the characteristics of your cluster (IE add/remove nodes) without having to change the configuration in their concept of customers 'grid '.
  >

  2. What is the relationship between IP SCAN and virtual IPs?

  IP SCANNER is used to receive new connection requests and redirects to the VIP IP.
  The virtual IP address sets and allow failover of connections after connection is established.

  When the client requests a connection, Oracle Client 11 GR 2 find for IP addresses and create a list of all IP SCAN available for this host-scan, the first attempt to connect to RAC uses one of the available SCAN IP addresses.
  The listener ANALYSIS will receive this connection and re - direct to one of the available using LOCAL_LISTENER nodes from that time the connection is made by using the virtual IP (VIP).

  All SCAN/VIP must be resolved by the DNS.

  The customer knows that there is only the Hostname SCAN, which is configured in the connection string.
  Once the connection is requested Oracle Clusterware redirects the connection to one of the VIP host name must be resolved by the DNS.

  Kind regards
  Levi Pereira

• two node Oracle RAC with two Oracle databases completely different on each node?

  We currently have two different applications that use Oracle databases.  Current configuration is two different oracle homes dbhome_1, dbhome2 with separate mounting LINUX points containing the Oracle homes and *.dbf files on a single host server.

  Previously, the idea was to set up a second server identical host configured as a 'data guard' for both of these databases.  Now, management wants to implement a cluster of CARS of two nodes, with each node running two databases.  With the Standard edition.

  I only did CARS of high availability and scalability for a single database.  Is it possible to run two completely different databases Oracle on a two-node RAC cluster?  I am inclined to think that they it has divided into

  two clusters RAC to two nodes on four small servers host.  Any suggestions or comments would be appreciated?

  Is it possible to run two completely different databases Oracle on a two-node RAC cluster?

  The short answer is Yes... it is possible.  It will work without any problem, as long as you have the resources available to an additional database.

  I am inclined to think that they it has divided into two clusters RAC to two nodes on four small servers host.

  There is another option.  In the past I have two databases on a RAC cluster that has been implemented for reasons of cost of license / (I don't think that this applies to itself, but you will need to check).

  However having seen on separate hosts that you have only potentially interruptions of service on a database if you decide to do something like upgrading from one of the databases and thus upgrade the GI as well.  This would mean interruptions in service for all your databases using the GI.

• QRCode in Oracle Database 10g class

  Hi guys,.

  I am trying to install a java class that generates an Image QR in the server. The class is QRCode.class if I run this class in the server, then the QR Image is generated, now I want to do this, but the appeal of this java class in the database but I can't compile the java class into the database, the code for the class is:

  CREATE OR REPLACE AND RESOLVE JAVA SOURCE NAMED APPS. " QRCode"AS

  package prosegur.qrcode;

  to import java.awt.image.BufferedImage;

  import java.io.IOException;

  import java.util.ArrayList;

  import java.util.List;

  public class {QRCode

  private static final int PAD0 = 0xEC.

  private static final int PAD1 = 0x11;

  private int reference;

  Private Boolean [] [] modules;

  private int moduleCount;

  private int errorCorrectLevel;

  private list < QRData > qrDataList;

  public QRCode() {}

  this.typeNumber = 1;

  this.errorCorrectLevel = ErrorCorrectLevel.H;

  this.qrDataList = new ArrayList < QRData > (1);

  }

  public int getTypeNumber() {}

  return of reference;

  }

  {} public void setTypeNumber (int reference)

  this.typeNumber = reference;

  }

  public int getErrorCorrectLevel() {}

  Return errorCorrectLevel;

  }

  {} public void setErrorCorrectLevel (int errorCorrectLevel)

  this.errorCorrectLevel = errorCorrectLevel;

  }

  {} public void addData (string data)

  addData (data, QRUtil.getMode (data));

  }

  ' Public Sub addData (String, int mode data) {}

  {Switch (mode)}

  case Mode.MODE_NUMBER:

  addData (new QRNumber (data));

  break;

  case Mode.MODE_ALPHA_NUM:

  addData (new QRAlphaNum (data));

  break;

  case Mode.MODE_8BIT_BYTE:

  addData (new QR8BitByte (data));

  break;

  case Mode.MODE_KANJI:

  addData (new QRKanji (data));

  break;

  by default:

  throw new IllegalArgumentException ("mode:" + mode);

  }

  }

  public void clearData() {}

  qrDataList.clear ();

  }

  protected void addData (QRData qrData) {}

  qrDataList.add (qrData);

  }

  protected int getDataCount() {}

  Return qrDataList.size ();

  }

  protected QRData getData (int index) {}

  Return qrDataList.get (index);

  }

  {} public is Boolean (int row, int col)

  If (modules [row] [column]! = null) {}

  Return modules [row] [col] .booleanValue ();

  } else {}

  Returns false;

  }

  }

  public int getModuleCount() {}

  Return moduleCount;

  }

  public void make() {}

  make (false, getBestMaskPattern());

  }

  private int getBestMaskPattern() {}

  int minLostPoint = 0;

  model int = 0;

  for (int i = 0; i < 8; i ++) {}

  Make (true, i);

  int lostPoint = QRUtil.getLostPoint (this);

  If (i == 0 | minLostPoint > lostPoint) {}

  minLostPoint = lostPoint;

  model = i;

  }

  }

  return the template;

  }

  Private Sub (Boolean test, int maskPattern) {} do

  moduleCount = reference * 4 + 17;

  modules = new Boolean [moduleCount] [moduleCount];

  setupPositionProbePattern (0, 0);

  setupPositionProbePattern (moduleCount - 7, 0);

  setupPositionProbePattern (0, moduleCount - 7);

  setupPositionAdjustPattern();

  setupTimingPattern();

  setupTypeInfo (test, maskPattern);

  If (reference > = 7) {}

  setupTypeNumber (test);

  }

  DataArray [] QRData = qrDataList.toArray (new QRData [qrDataList.size ()]);

  data Byte [] = createData (reference, errorCorrectLevel, dataArray);

  mapData (data, maskPattern);

  }

  ' Private Sub mapData (data byte [], int maskPattern) {}

  int inc = - 1;

  int row = moduleCount - 1;

  int bitIndex = 7;

  int byteIndex = 0;

  for (int col = moduleCount - 1; col > 0; col = 2) {}

  If (col == 6) col -;

  While (true) {}

  for (int c = 0; c < 2; c ++) {}

  If (modules [row] [column - c] == null) {}

  darkness Boolean = false;

  If (byteIndex < data.length) {}

  Black = (((données [byteIndex] >>> bitIndex) & 1) == 1);

  }

  Boolean mask = QRUtil.getMask (maskPattern, line, col - c);

  If {(mask)

  Black =! Dark;

  }

  modules [row] [column - c] = Boolean.valueOf (dark);

  -bitIndex;

  If (bitIndex ==-1) {}

  byteIndex ++;

  bitIndex = 7;

  }

  }

  }

  rank += inc.;

  If (row < 0 | moduleCount < = row) {}

  rank-=, increase;

  Inc = - inc;

  break;

  }

  }

  }

  }

  private void setupPositionAdjustPattern() {}

  int [] pos = QRUtil.getPatternPosition (typeNumber);

  for (int i = 0; i < pos.length; i ++) {}

  for (int j = 0; j < pos.length; j ++) {}

  int row = pos [i];

  int col = pos [j];

  If (modules [row] [column]! = null) {}

  continue;

  }

  for (int r = - 2; r < = 2; r ++) {}

  for (int c = - 2; c < = 2; c ++) {}

  If (r ==-2 | r == 2 | c ==-2 | c == 2)

  || (r == 0 & & c == 0)) {

  modules [line + r] [col + c] = Boolean.valueOf (true);

  } else {}

  modules [line + r] [col + c] = Boolean.valueOf (false);

  }

  }

  }

  }

  }

  }

  ' private void setupPositionProbePattern (int row, int col) {}

  for (int r = - 1; r < = 7; r ++) {}

  for (int c = - 1; c < = 7; c ++) {}

  If (line + r < = - 1 | moduleCount < = row + r)

  || Col + c < = - 1. moduleCount < = col + c) {}

  continue;

  }

  If ((0 < = r & & r < = 6 & & (c == 0 || c == 6)))

  || (0 < = c & & c < = 6 & & (r == 0 | r == 6))

  || (2 < = r & & r < = 4 & & 2 < = c & & c < = 4)) {

  modules [line + r] [col + c] = Boolean.valueOf (true);

  } else {}

  modules [line + r] [col + c] = Boolean.valueOf (false);

  }

  }

  }

  }

  private void setupTimingPattern() {}

  for (int r = 8; r < moduleCount - 8; r ++) {}

  If (modules [r] [6]! = null) {}

  continue;

  }

  [r] modules [6] = Boolean.valueOf (r % 2 == 0);

  }

  for (int c = 8; c < moduleCount - 8; c ++) {}

  If (modules [6] [c]! = null) {}

  continue;

  }

  modules [6] [c] = Boolean.valueOf (c % 2 == 0);

  }

  }

  {} private void setupTypeNumber (Boolean test)

  int bit = QRUtil.getBCHTypeNumber (typeNumber);

  for (int i = 0; i < 18; i ++) {}

  Boolean mod = Boolean.valueOf (! test & & ((bits >> je) & 1) == 1);

  modules [I / 3] [I % 3 + moduleCount - 8-3] = mod;

  }

  for (int i = 0; i < 18; i ++) {}

  Boolean mod = Boolean.valueOf (! test & & ((bits >> je) & 1) == 1);

  modules [I % 3 + moduleCount - 8-3] [I / 3] = mod;

  }

  }

  ' Private Sub setupTypeInfo (Boolean test, int maskPattern) {}

  data = int (errorCorrectLevel < < 3) | maskPattern;

  int bit = QRUtil.getBCHTypeInfo (data);

  // ???

  for (int i = 0; i < 15; i ++) {}

  Boolean mod = Boolean.valueOf (! test & & ((bits >> je) & 1) == 1);

  If (I have 6 <) {}

  the [i] [8] modules = mod;

  } ElseIf (I < 8) {}

  modules [i + 1] [8] = mod;

  } else {}

  modules [moduleCount - 15 + i] [8] = mod;

  }

  }

  for (int i = 0; i < 15; i ++) {}

  Boolean mod = Boolean.valueOf (! test & & ((bits >> je) & 1) == 1);

  If (I < 8) {}

  modules [8] [moduleCount - i - 1] = mod;

  } ElseIf (I < 9) {}

  modules [8] [15 - i - 1 + 1] = mod;

  } else {}

  modules [8] [15 - i - 1] = mod;

  }

  }

  // ??

  modules [moduleCount - 8] [8] = Boolean.valueOf(!test);

  }

  public static ubyte [] createData (int errorCorrectLevel, int reference, dataArray [] QRData) {}

  RSBlock [] rsBlocks = RSBlock.getRSBlocks (reference, errorCorrectLevel);

  BitBuffer buffer = new BitBuffer();

  for (int i = 0; i < dataArray.length; i ++) {}

  Data QRData = dataArray [i];

  buffer.put (Data.getMode (), 4);

  buffer.put (Data.getLength (), data.getLengthInBits (typeNumber));

  Data.Write (buffer);

  }

  int totalDataCount = 0;

  for (int i = 0; i < rsBlocks.length; i ++) {}

  totalDataCount += rsBlocks [i] .getDataCount ();

  }

  If (buffer.getLengthInBits () > totalDataCount * 8) {}

  throw new IllegalArgumentException ("code length overflow. ("

  + buffer.getLengthInBits)

  + « > »

  + totalDataCount * 8

  + ")");

  }

  // ?????

  If (buffer.getLengthInBits () + 4 < = totalDataCount * 8) {}

  buffer.put (0, 4);

  }

  padding

  While (buffer.getLengthInBits (% 8)! = 0) {}

  buffer.put (false);

  }

  padding

  While (true) {}

  If (buffer.getLengthInBits () > = totalDataCount * 8) {}

  break;

  }

  buffer.put (PAD0, 8);

  If (buffer.getLengthInBits () > = totalDataCount * 8) {}

  break;

  }

  buffer.put (PAD1, 8);

  }

  Return createBytes (buffer, rsBlocks);

  }

  private static ubyte [] (BitBuffer buffer RSBlock [] rsBlocks) createBytes {}

  int offset = 0;

  int maxDcCount = 0;

  int maxEcCount = 0;

  int [] [] dcdata = new int [rsBlocks.length] [];

  int [] [] ecdata = new int [rsBlocks.length] [];

  for (int r = 0; r < rsBlocks.length; r ++) {}

  int dcCount is rsBlocks [r] .getDataCount ();.

  int ecCount = rsBlocks [r] .getTotalCount () - dcCount;

  maxDcCount = Math.max (maxDcCount, dcCount);

  maxEcCount = Math.max (maxEcCount, ecCount);

  [r] dcdata = new int [dcCount];

  for (int i = 0; i < dcdata [r] .length; i ++) {}

  dcdata [r] [i] = 0xff & buffer.getBuffer ([i + shift]);

  }

  offset += dcCount;

  Polynomial rsPoly = QRUtil.getErrorCorrectPolynomial (ecCount);

  Polynomial rawPoly = new polynomial (dcdata [r], rsPoly.getLength () - 1);

  Polynomial modPoly = rawPoly.mod (rsPoly);

  [r] ecdata = new int [rsPoly.getLength () - 1];

  for (int i = 0; i < ecdata [r] .length; i ++) {}

  int modIndex is i + modPoly.getLength () - ecdata [r] .length;.

  ecdata [r] [i] = (modIndex > = 0)? modPoly.get (modIndex): 0;

  }

  }

  int totalCodeCount = 0;

  for (int i = 0; i < rsBlocks.length; i ++) {}

  totalCodeCount += rsBlocks [i] .getTotalCount ();

  }

  data Byte [] = new ubyte [totalCodeCount];

  int index = 0;

  for (int i = 0; i < maxDcCount; i ++) {}

  for (int r = 0; r < rsBlocks.length; r ++) {}

  If (I < dcdata [r] .length) {}

  data [index ++] = dcdata (byte) [r] [i];

  }

  }

  }

  for (int i = 0; i < maxEcCount; i ++) {}

  for (int r = 0; r < rsBlocks.length; r ++) {}

  If (I < ecdata [r] .length) {}

  data [index ++] = ecdata (byte) [r] [i];

  }

  }

  }

  return data;

  }

  public static getMinimumQRCode (int errorCorrectLevel, string data) {} QRCode

  int mode = QRUtil.getMode (data);

  QRCode qr = new QRCode();

  qr.setErrorCorrectLevel (errorCorrectLevel);

  qr.addData (data, mode);

  int length = qr.getData (0) .getLength ();

  for (reference int = 1; Reference < = 10; reference ++) {}

  If (length < = QRUtil.getMaxLength (reference, errorCorrectLevel)) {}

  qr.setTypeNumber (typeNumber);

  break;

  }

  }

  QR.make ();

  return qr;

  }

  public BufferedImage createImage (int cellSize, int margin) throws IOException {}

  imageSize = getModuleCount() int * cellSize + margin * 2;

  BufferedImage image = new BufferedImage (imageSize imageSize, BufferedImage.TYPE_INT_RGB);

  for (int y = 0; y < imageSize; y ++) {}

  for (int x = 0; x < imageSize; x ++) {}

  If (margin < = x & & x < imageSize - margin)

  (& & margin < = y & & y < imageSize - margin) {}

  Col int = (x - margin) / cellSize;

  int row = (y - margin) / cellSize;

  If (is (row, col)) {}

  image.setRGB (x, y, 0x000000);

  } else {}

  image.setRGB (x, y, 0xffffff);

  }

  } else {}

  image.setRGB (x, y, 0xffffff);

  }

  }

  }

  return image;

  }

  }

  /

  And the error when I tried to compile is:

  CREATE OR REPLACE AND RESOLVE JAVA SOURCE NAMED APPS. " QRCode"AS

  *

  ERROR on line 1:

  ORA-29536: badly formed source: met "<" on line 13, column 22.

  Expected one of:

  < ID >...

  "[" ...

  "." ...

  "(" ...

  It's like the java compiler does not detect the line:

  private list < QRData > qrDataList;   With the symbols of <>...

  
  

  DB Version: Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - 64bi

  
  

  Could someone help me? may may be the version of the java compiler of the database?

  
  

  Thank you!!

  
  

  Pablo. -.
  

  The version of the JVM in 10g does not include generic drugs

• Comparing the data set of Oracle database local to the Remote SQL Server database

  Hello

  I have a table in an Oracle database that is gradually being updated with a table in SQL server through the database link. There is a field "Date of creation" in the table in SQL server that I used to find the newly created records and shoot and insert them into the local table to the Oracle database.

  Now the question is the documents/data in the SQL server remote can be deleted as well and I see a lot of files are already deleted and I couldn't find a way to capture the information of deleted data to remove from my local table.

  I tried

  SELECT id local_table

  where there is no

  (select * (or 1))

  of remote_table@database_link

  where remote_table.id = local_table.id).

  And I tried to replace not exist with no so.

  The problem is that the query is too slow with link of database for IN/NOT EXISTS clause NO. So, I'm trying to find an effective way to capture the lines deleted in the remote to remove as a result of my local table table.

  Any help is appreciated.

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit

  Thank you

  Chrystelle

  It is perhaps easier

  Select pk / * or sustitutive key * / from Oracle.tba

  less

  Select pk / * or sustitutive key * / from SQLSERVER.tab

  This returns the rows that exist in Oracle but not in SQL SERVER-> delteted lines in SQL Server.

  Another way is to create a trigger to remove in sqlserver and track in a table delete lines.

  HTH - Antonio NAVARRO

  http://SQL1.WordPress.com/

• The Oracle database window operating system upgrade

  Dear Experts, we need your expert advisor on below asking.

  Current context:

  OS: Microsoft Windows Server 2003 R2 Enterprise x 64 Edition SP2

  Oracle: Oracle Database 10 g Enterprise Edition Release 10.2.0.1.0 - 64 bit

  
  

  Required environment:
  

  OS: Microsoft Windows Server 2008 R2 Enterprise x 64 Edition SP2

  Oracle: Oracle Database 10 g Enterprise Edition Release 10.2.0.1.0 - 64 bit

  We want to upgrade the operating system only, but want to use the same database of 2003 x 64 OS-2008 x 64 OS. Please guide.

  Thank you

  
  

  
  

  You should check the Certification on https://support.oracle.com

  I get "10.2.0.1.0 Oracle database is not certified Microsoft Windows x 64 (64-bit) 2008 R2"

  Hemant K Collette

• Java web application UTF-8 encoding and mswin1252 Oracle database

  Hi all
  
  We need the following:
  
  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  With partitioning, Oracle Label Security, OLAP, Data Mining,
  Oracle Database Vault and Real Application Testing options
  
  Developing on Jdeveloper 10.1.3.5 on WinXP Pro. Our production application servers are running on Windows 2003 10.1.3.4. I was using the jdbc libraries provided, but test now with the 11.1.0.7.0 drivers, downloaded from OTN.
  
  Database = WE8MSWIN1252 NLS_CHARACTERSET
  
  I guess our application servers are on WEMSWIN1252.
  
  Our application has to support french and English.
  
  We had problems with the unmapped characters (question mark reverse) in our database, and we suspect that these are special windows extended characters. Our java web application is set to the character set iso8859-1. We suspect that it is maybe the reason why some characters were is badly encoded in the comic book. Our application is built with struts 1.2.9.
  
  The page encoding UTF - 8 seems to be the standard for web applications. I changed our configuration of the struts controller to use UTF - 8. Using Jdeveloper OC4J local testing reveals that although the data extracted from makes it db correctly in the browser, registering with special characters is a problem.
  
  "Stéphane" recorded under "Sta © phane".
  
  I guess the question is here, mswin1252 is a single-byte coding scheme, but UTF - 8 is an encoding scheme of variable width and for some European characters, uses 2 bytes to represent. I think that's what I see here.
  
  Now it is, is it possible for us to use UTF - 8 in java application, but our database in MSWIN1252? I remember reading that the best practice is always to use a character set of superset in comics, as well as its subsets in customers. In our case, we also deal with both representations of variable width. I also remember reading that JDBC is based more on the nls_lang setting... can't jdbc do charset conversion?
  
  Thanks for the help

  Generally speaking, managers Oracle will do the conversion. I can't speak for the other executives, but whatever it is based on Java is expected to perform the conversion correctly.

  However, your colleague is right that it is strongly advised to have your database running with AL32UTF8 database character set. This is because when the application is configured for UTF - 8, you no longer control what characters people can conclude their browsers/clients. It is preferable to be able to store all the possible characters and no risk of data loss. In addition, any request must be fully compatible Unicode today ' today - including the backend.

  -Sergiusz

• Oracle database growth

  Hi guys,.
  
  I'm in Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - Production on RHEL5 64 bit.
  
  I want to get the growth of the database by month or week.
  
  Is there a script that I can use for this information?
  
  Help, please!
  
  Thanks in advance.

  user11979518 wrote:
  Hi guys,.

  I'm in Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - Production on RHEL5 64 bit.

  I want to get the growth of the database by month or week.

  Is there a script that I can use for this information?

  Help, please!

  Thanks in advance.

  check out the link for the growth of the database below...
  http://Neeraj-DBA.blogspot.com/2011/04/tracking-Oracle-database-growth.html

  hope this can help you

  Neeraj-

• 1Z0-047 Oracle database SQL expert

  Hi all!
  
  I want to prepare for review reference in question.
  How can I make it right?
  
  Is these books sth that I would like to search for? :
  
  Oracle Database 10 g, SQL (Osborne ORACLE Press Series)
  http://www.Amazon.com/GP/product/0072229810/ref=s9subs_c1_14_at1-rfc_g1_si3?pf_rd_m=ATVPDKIKX0DER & pf_rd_s = center-1 & pf_rd_r = 0NY1DZFY480AYW383FNE & pf_rd_t = 101 & pf_rd_p = 463383351 & pf_rd_i = 507846
  
  OCA Oracle database SQL Expert corrected (exam 1Z0-047)
  http://www.Amazon.com/Oracle-database-expert-guide-1Z0-047/DP/0071614214/ref=sr_1_14?ie=UTF8 & s = Books & qid = 1229588476 & SR = 8-14
  
  Are there other options, for example PDF files.
  
  Best regards
  user10679687

  These two references should be useful. You can also refer to:

  Oracle® database SQL Reference 10 g Release 2 (10.2)
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/TOC.htm

  1Z0-047 Oracle database SQL expert
  http://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=41&p_org_id=1001&lang=us&p_exam_id=1Z0_047

  Sample Questions - 1Z0-047 Oracle database SQL Expert
  http://www.Oracle.com/global/us/education/certification/sample_questions/exam_1z0-047.html

• The Oracle database is free for individuals?

  Is the Oracle database free for private developers, just test the database, or what I personally contact them in order to pay them? Only, I went to the page of download of Oracle and downloaded 2 pcs. Installation of 1 GB, installed files database on my Windows 7 computer and then started using it.

  Have you paid attention to the license agreement you agreed before downloading software? Restrictions on use are clearly stated.

  Oracle Technology Network Developer for Oracle Database 11g Express Edition license terms

  The limits for 11g XE are also documented-

  Oracle & reg; Database Express Edition

  Oracle & reg; Database Express Edition

  HTH
  Srini

• Please suggest some in depth Oracle Database Security book

  Please suggest some Oracle database security book in depth.
  
  I'm looking for some very good and in the books of depth in Oracle database security book advance.
  
  
  Thanks in advance...

  If you go to Amazon.com, then search for 'Security Oracle', there are dozens of good books.

  I would probably start

  Applied Oracle security

  and

  Effective Oracle security

  Justin

• Due to Oracle Database 11 g: Administration Workshop Release 2 class I count?

  Hey all. I'm trying to figure out if the class "Oracle Database 11 g: Administration Workshop I release 2" taken into account in the OCP certification. I know that "Oracle Database 11g: Administration Workshop I" made from this page: http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=244#5 However, Release 2 is not listed there. It would be a pretty spectacular waste of $3,000 to take a class that does not count towards OCP so that's what I'm going to. :) Help appreciated!

  Yes, the R2 and R1 of the class version for both count.

  The number of courses will be D50102ccxx - cc indicates the language, if the course is offered multilingual and xx 'revision '. In this case, we went from 'xx = 10' to 'xx = 21'.

  Oracle stops delivery of course R1 once the course of R2 is available, except exceptional request request the R1 version. I had many participants in my classes of R2 to the exam and they have not indicated any problem with additional content or any problem with the requirement practice.

• Configuration of DNS for the ANALYSIS used with Oracle Database 11g Release 2 RAC

  Hi gurus,
  
  I am on how to install oracle RAC 11 g 2, ANALYSIS required for installation, but I do not know how to configure the SCAN with DNS. Have a guide/note/document setup to install DNS configuration for ANALYSIS, can help me to overcome installation CARS with SCAN (single Client access name)
  
  Please don't bother me on my English terible
  
  So thank you
  Ch

  There are a lot of useful documents on the net:

  http://www.Oracle.com/technetwork/database/clustering/overview/scan-129069.PDF

  http://wiki.Oracle.com/page/Oracle+RAC11g+R2+single+client+access+name-+scan

  http://www.garrettseibt.com/database/?p=208

  Best regards

  Gokhan Atil

  -------------------------------------------------------
  If you answer this question, please mark appropriate as correct/useful messages and the thread as closed. Thank you