Oracle ignores the parameter max_dispatchers

Similar Questions

• Composer calendar ignores the startTime parameter

  Hello everyone!

  I am creating a calendar event by using the composer calendar via the Invocation Framework System. The problem is that the calendar composer dialog box ignores the startTime parameter. Here is the code:

  bb::system::InvokeRequest cardRequest;
  QVariantMap requestData;
  
  requestData["startTime"] = dateTimePicker_->value().toString("yyyy-MM-dd hh:mm:ss");
  
  cardRequest.setTarget("sys.pim.calendar.viewer.eventcreate");
  cardRequest.setAction("bb.action.CREATE");
  cardRequest.setMimeType("text/calendar");
  
  bool ok = true;
  QByteArray encodedRequestData = bb::PpsObject::encode(requestData, &ok);
  if (!ok)
  {
      Q_ASSERT(false);
      return;
  }
  
  bb::system::InvokeTargetReply *reply = invokeManager_->invoke(cardRequest);
  QObject::connect(reply, SIGNAL(finished()),
           this, SLOT(invokeCalendar_finished()));
  

  I tried to use 'startTime' and 'start', or work.

  Any help is very appreciated!

  Just do QDateTime.toString () with no args just worked for me.

  Have an idea what the term is supposed to be in? It says int but does not say if it is in seconds, minutes, hours, milliseconds

• How to extract the data that ends with GG replicat process all ignore replicat parameter is ued for installing bidrectiona?

  Hi all

  I have 2 DBs in the two-way GG configuration and using ignore replicat parameter to avoid a loop. I want to know if another application also sends data via GG to one of the DBs and want to include that data extract, process that must be sent to the downstram system.

  Thank you

  Traoré

  I fixed the problem by putting in place the parameter called NOTRACETABLE.

  Thank you all for your support.

  Traoré

• dbAdapter fails during the call to procedure package oracle object type in the parameter out

  JDeveloper 1.1.1.6

  Oracle 11g

  Existing package procedure is defined with the table of objects in input parameters and.

  Package myPackage

  procedure processRecon (numero_projet VARCHAR2,

  INST_ID select NUMBER,

  recon_type VARCHAR2,

  gis_design_stock GMPVT. GMPVT_GIS_DESIGN_STOCK_T,

  stock_uop GMPVT. GMPVT_STOCK_CODES_T,

  x_status OUT VARCHAR2,

  x_escalation OUT VARCHAR2,

  x_recon_error ON GMPVT. GMPVT_GIS_RECON_ERR_T) IS

  GMPVT. GMPVT_GIS_RECON_ERR_T is an array of GMPVT objects. GMPVT_GIS_RECON_ERR, who has 12 fields including the new I added it.

  I have added a new field to the GMPVT object. GMPVT_GIS_DESIGN_STOCK, where GMPVT. GMPVT_GIS_DESIGN_STOCK_T is a table of GMPVT. GMPVT_GIS_DESIGN_STOCK, no problems encountered during the test.

  Next, I added a new field for the object of type GMPVT. GMPVT_GIS_RECON_ERR, the following error below occurs when the DBAdapter is called

  < Summary > Exception occurred when the link was invoked. Exception occurred during invocation of the JCA binding: "JCA binding run operation 'processStockRecon' failed due to the reference: Interaction processing error." Error in the processing of applications from running. GMP_SOA_RECON_PKG. Interaction of the PROCESSRECON API. An error occurred during the processing of the interaction to invoke APPS. GMP_SOA_RECON_PKG. PROCESSRECON API. Cause: java.lang.ArrayIndexOutOfBoundsException: 12 check to make sure that the XML file containing the data of the parameter matches the parameter definition in the XSD. This exception is considered non reproducible, probably due to an error of modeling. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution. < / Summary >

  I confirmed that the XSD for the stored procedure has in fact change, which has been generated by JDeveloper as I refreshed the database adapter.

  The statement "Cause: java.lang.ArrayIndexOutOfBoundsException: 12" I can't that assume somehow SOA has 12 parameters but the 12 setting was not saved.

  Any thoughts on what I might be missing. I can provide more information if necessary.

  Hello

  This problem has been resolved. Not deployed SOA composite and then deployed to the server of the SOA. For some reason, SOA has been either you see does not changes in the file XSD (cached?) or the XSD was not get updated.

  Thank you

• How to get the value of the parameter to form of oracle from the html page

  Hello
  
  
  
  I want to know that is it possible to grab the value of the parameter of the html page and display on my oracle ACTIVE form.
  
  
  
  Kind regards
  Raza

  Pass the parameter in the HEART

  as

  hrtest/dev60cgi/ifcgi60.exe? Form=LOGIN_FORM_Para.FMX&width=1000&height=700&userid=123/123@test&otherparams=Pakistan=Allah ".

  Set a: PARAMETER. PAKISTAN on form

  and write after outbreak

  BEGIN
  If: PARAMETER. PAKISTAN = "ALLAH" then
  message ('HO ALLAH AKBAR');
  message ('HO ALLAH AKBAR');
  message(:Parameter.) PAKISTAN | ("AKBAR HO');
  message(:Parameter.) PAKISTAN | ("AKBAR HO');
  on the other
  message ("INSH' |: PARAMETER.") (PAKISTAN);
  message ("INSH' |: PARAMETER.") (PAKISTAN);
  end if;

  END;

  Kind regards

  Khurram Altaf

• Form of Oracle 10 g by passing the parameter of the forms to reports

  Hi all
  
  I work in 10g AS and have a form which is called a Menu. When we run the form he asks that the connection information. and once it is successful, then it opens a menu.
  Here in the menu, I ask a report before a form of parameter. In this setting, I have 3 userid startDate and endDate fields.
  
  It's the part of my code that executes the report.
  
  ADD_PARAMETER (PARAM_ID, 'Hogshead', TEXT_PARAMETER, USER);
  ADD_PARAMETER (PARAM_ID, 'start_date', TEXT_PARAMETER, TO_CHAR(SYSDATE,'DD-MON-YYYY'));
  ADD_PARAMETER (PARAM_ID, 'end_date', TEXT_PARAMETER, TO_CHAR(SYSDATE,'DD-MON-YYYY'));
  
  Rep: = find_report_object ('MyReport');
  vc_reportserver: = 'rep_prothonotary5_FRHome1 ';
  
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'HTMLCSS');
  SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_OTHER,*'paramform=yes'*);
  
  v_rep: = RUN_REPORT_OBJECT (repid, PARAM_ID);
  
  Here I am able to get the report when I speak of paramform = no. As the parameters are passed directly to the form. Start date and end Date will be SYSDATE as it is in the code above.
  But I need to be as paramform = yes, so that the form of the parameter appears before the report and, I can change the settings for Start Date and End Date . When I put paramform = yes in my code, the parameter form appers, but this form of parameter, there is a button submit Querry and Reset and when to drop querry button is pressed, the page Web site can not display the page .
  
  How should I make it work?

  a possible solution is to create a simple form to let the user enter its parameters, and then call the report itself with paramform = no

• Information about the parameter CASE_SENSITIVE_CHARACTER_COMPARISON

  Hi all
  
  Could someone provide information on the "CASE_SENSITIVE_CHARACTER_COMPARISON" parameter in the NQSConfig.INI file, which would be located under C:\OracleBI\server\Config\
  
  In our current environment, the setting is set to off, and application reports/guests throw not data as expected. When the parameter is set on, the values are as expected.
  
  So please let me know what should be the default value for this parameter, and if the parameter is set on there that no matter what impact on other applications?
  
  Published by: 819170 on December 21, 2011 18:54

  CASE_SENSITIVE_CHARACTER_COMPARISON

  Specifies if the Oracle Business Intelligence Server distinguishes between uppercase and lowercase characters when you perform comparison operations.

  Valid values are ON and OFF. When set to OFF, the case is ignored. When the value, the case is considered for comparisons. For binary types, distinguish uppercase / lowercase for the server and the relational database to put the same way.

  This setting applies only to internal comparisons of the Oracle Business Intelligence server for caching and aggregation. Distinguish uppercase / lowercase is a function of database operations and is defined at the database level. The CASE_SENSITIVE_CHARACTER_COMPARISON parameter allows the server to Oracle's BI correspond to functions of the backend database. The following operators are affected:

  * Order in
  * Group of
  * Separate
  * Join
  * comparisons (<,>, =, <=,>=, <> )

  For example, consider the following three terms:

  * ACME
  * DELTA
  * acme

  An Order By with CASE_SENSITIVE_CHARACTER_COMPARISON set TO results in rows in the order shown in the previous example. An Order By with case-sensitive setting translates ACME and acme are contiguous.

  If the term is case-sensitive and you perform a delete double (separate), the result is three rows. If the term is not case sensitive, so the separate result is two rows.

  CASE_SENSITIVE_CHARACTER_COMPARISON must be set in order to correspond with how the back-end database deals with cases. For example, if the back-end database is case-insensitive, then Oracle Business Intelligence Server must be configured to be case insensitive. If Oracle Business Intelligence Server and the back-end database are not case sensitive in the same way, some subtle issues can cause.

  For an example of CASE_SENSITIVE_CHARACTER_COMPARISON applied to the aggregation, a database that is case-sensitive has the following tuples:

  Units in the region
  WEST 1
  West 1
  West 1

  With the value CASE_SENSITIVE_CHARACTER_COMPARISON, the data is returned to the client the with the same results presented in the previous table.

  With CASE_SENSITIVE_CHARACTER_COMPARISON set to OFF, the data is still once returned to the client the with the same results presented in the previous table. There is no change because the Oracle BI server did not comparisons of characters.

  However, if SUM_SUPPORTED is set to OFF in the table of features, Oracle BI server is forced to do a character comparison. In this case, the query results include:

  Units in the region
  WEST 3

  The reason for these results is that the Oracle BI server has disabled case-sensitive character comparison, so now treat three tuples as the same value and the aggregates. In this case = West = Western. However, if you filter on the column of the region, you would always see the WEST regions, West and West. CASE_SENSITIVE_CHARACTER_COMPARISON does not affect the filtering on a back-end database. The logic shown in the example of aggregation applies to caching as well.

  Given that CASE_SENSITIVE_CHARACTER_COMPARISON is defined in the NQSConfig.INI file, the setting applies to the backend databases in a repository. So, it must be configured to match the case of the dominant baseline of the repository.

  Example: CASE_SENSITIVE_CHARACTER_COMPARISON = OFF;

  Hope that helps... It will result in the number of files in the output...

  Thank you
  V

  Published by: Vincent Krishna August 24, 2011 12:03

• Relevance of the parameter PGA_AGGREGATE_TARGET

  Hello
  
  The PGA_AGGREGATE_TAGET parameter is defined as below in the oracle documentation.
  
  + "PGA_AGGREGATE_TARGET specifies the overall target PGA memory available for all server processes associated with the instance. +
  
  What ever we value for this parameter, for example I put it at 200M. But oracle it still increases the value according to its condition and the availability of (sharp RAM).
  
  On the one hand to my database, I see PGA utilizaion 800M in AWR reports.
  
  When oracle increases internal PGA value according to his need, so what is the relevance of the PGA_AGGREGATE_TARGET parameter.
  
  Maybe I'm missing somewhere in the parameter definition (Meaning), please correct me if I'm wrong.
  
  My version of oracle 10.2.0.3.
  
  Thanks in advance!
  
  
  Best regards
  oratest

  There is an explanation in the 10g Performance Tuning Guide, Chapter 7, under the PGA memory management.

  Query V$ PGA_TARGET_ADVICE. If ESTD_OVERALLOC_COUNT is not null for the PGA_TARGET_FOR_ESTIMATE that corresponds to your setting of PGA_AGGREGATE_TARGET, then Oracle will ignore your settings and allot more if necessary.

  Kind regards
  Bob

• How can I ignore the differences between databases when reading data from a database?

  My boss wants me to create a text parser that analyzes the sentence below and executes a SQL query.

  "' get the table field1, field2, field3,..., Manyfield [where to SQL conditional statements].

  This corresponds to "select Field1, Field2, field3,..., table Manyfield where blahblah".

  Since different DBMS have different timestamp formats, this sentence should be changed for each DBMS.

  Ignore the differences is to do anlayzer that converts a certain type of timestamp string to one that adapts to each DBMS complex a text.

  But it seems ridiculous to adopt this solution when there might be an elegant solution.

  LabVIEW Toolkit of DB is not able to hide the differences.

  Does anyone have a better idea that I do?

  I remember having a problem like this when you are working with an older version of an Oracle server. I was able to change the session by setting the 'NLS_TIMESTAMP_FORMAT '.

  This page might be of interest; I found this, when searching for "NLS_TIMESTAMP_FORMAT".

  Database portability: Date and Timestamp columns

  (PS String Format and channel Scan functions work well with the correct date format specifiers. See the link below in my signature for the ISO 8601 timestamp/string conversions)

• Listener local value of the parameter

  Hello to all, Oracle 11.2.0.3 SOE Win Server 2012 with ONLY a single instance and a DB with SID = erp. I had a look at the P-file where I noticed a parameter called Local_listener with the value of: "LISTENER_ERP." However, the name of the database listener is just 'LISTENER', the value 'LISTENER_ERP' stand for? It refers to what?

  Hello

  1. its alias name can refers / cards to your tnsnames.ora where there is an entry

  2 local_listener says " LOCAL_LISTENER Specifies a network name that resolves to an address or a list of addresses of net local listeners (i.e. listeners who are running on the same computer as this instance) of Oracle." The address or the address list is specified in the TNSNAMES.ORA file or another trustee address configured for your system. ' - of doc oracle

  3. it contributes to your instance to register on default port (1521) which instance starts

  I hope this hepls

  -Pavan Kumar N

• BitLocker To Go intermittent "the parameter is incorrect."

  Hello

  I use bit locker to go on Windows 8 Surface Pro with a Western Digital USB 3.0 drive externally.  When I plug the disc it asks me to enter the password, and which seems to unlock OK but then when I try to double click on the drive icon in my computer to view the files I have error "the parameter is incorrect."  But the problem is intermittent and still can't whenever so if I keep trying (unplug and re-plug the USB drive and re - enter the password again once) it will finally work.  I'm sure I'm in the password correctly every time because if I enter the wrong password, I get an error message different let me know the password is incorrect.  I've seen a plu KB 2019926 article, but seems not applicable to the problem that I see.

  Any ideas on that?

  Thank you

  Greg

  Thanks for the reply.

  I think that now it's my software anti-virus, the origin of the problem.  I noticed that right after I plug in the USB Kaspersky Anti-virus key appears a dialog box asking if I want to analyze the dirve or not.  If I ignore the prompt 'do you want to analyze' and go directly to double clicking on the icon of the drive I always get the error "the parameter is incorrect."  But if I first answer "Yes or no" to the Kaspersky prompt before you double-click my drive icon, then I do not get the error.  If my work-around should just be sure to answer "Yes or no" to the prompt "do you want to analyze" before trying to access the files on the USB drive.

  Thank you

  Greg

• issues related to the parameter in the procedure

  Hi all

  I have a procedure which the code is given below:

  create or replace PROCEDURE seods01.get_cert_tx_lot_tmp (acct_alt_id_in in VARCHAR2

  , acct_alt_id_cntx_cde_in IN VARCHAR2 default 'COLA account number.

  ,                                              ibd_id_in               IN  INTEGER

  qry_rslt_out to sys_refcursor)

  IS

  BEGIN

  OPEN FOR Qry_rslt_out

  SELECT L.tx_lot_seq_nbr

  L.hld_prd_dte

  L.orig_purc_dte

  L.tx_lot_amt

  L.updt_tx_lot_amt

  L.tran_desc_txt

  OF v_acct_alt_id A

  v_cd_tx_lot L

  WHERE A.acct_alt_id = acct_alt_id_in

  AND A.acct_alt_id_cntx_cde = acct_alt_id_cntx_cde_in

  AND A.ibd_id = ibd_id_in

  AND L.eods_acct_id = A.eods_acct_id;

  EXCEPTION

  WHILE OTHERS THEN

  dbms_output.put_line(SQLCODE||) SQLERRM);

  END get_cert_tx_lot_tmp;

  now when I run the SP in the following way it works fine:

  VAR C1 REFCURSOR
  EXECUTE SEODS01.get_cert_tx_lot_tmp ('004000000000000093108026740', 'Number of COLA account', '1',: C1);

  PRINT C1

  When I try to ignore this value by default setting, then it is throwing ' wrong number or types of arguments "error

  VAR C1 REFCURSOR
  EXECUTE SEODS01.get_cert_tx_lot_tmp ('004000000000000093108026740 ', ' 1',: C1);

  PRINT C1

  and when I tried to put this as null or "then it gives me no results. only way through which I can produce results of this procedure without giving the default parameter is the name of the column with the value of the parameter as follows:

  VAR C1 REFCURSOR
  RUN SEODS01.get_cert_tx_lot_tmp (acct_alt_id_in = > '004000000000000093108026740', ibd_id_in = > '1', qry_rslt_out = >: C1);

  PRINT C1

  but the condition is that we do not want our consumers to put names of columns when they do not pass the default value setting, I hope that there should be a way to do it. Could someone help me please on this issue.

  Hello

  If you want to use positional notation, then you can only omit parameters by default when they are at the end of the parameter list. In your case, this would mean

  (acct_alt_id_in in VARCHAR2

  ibd_id_in in FULL

  qry_rslt_out ON sys_refcursor

  acct_alt_id_cntx_cde_in IN VARCHAR2 default 'COLA account number')

  Or you can put the procedure in a package and overload

  PROCEDURE seods01.get_cert_tx_lot_tmp

  (acct_alt_id_in in VARCHAR2

  acct_alt_id_cntx_cde_in IN VARCHAR2

  ibd_id_in in FULL

  qry_rslt_out to sys_refcursor)

  PROCEDURE seods01.get_cert_tx_lot_tmp

  (acct_alt_id_in in VARCHAR2

  ibd_id_in in FULL

  qry_rslt_out to sys_refcursor)

  In the procedure without the acct_alt_id_cntx_cde_in parameter, you can call the other version and provide the default value.

  Concerning

  Marcus

• passing the parameter through links page (navigation)

  Hello

  suggest me the way to pass the parameter through links in the page navigation.

  I tried it in EL, I'm not able to get on the page.

  is it a right approach or any other.

  Thank you

  A

  After showing the steps in the similar thread, I found this thread then re-post here.
  

  Pass the connection parameter to connected in portal Builder page

  
  

  Here are the steps to pass the parameter in a URL to another page:

  • Add a custom attribute to the attributes of the current portal (say MyPortal1) page [link Direct: http://127.0.0.1:8888 / webcenter, portal, MyPortal1, attributes ]

  OR

  Sign in to your personalized Portal (say MyPortal1)

  http://127.0.0.1:8888 / webcenter/Portal/MyPortal1

  Click the settings (e.g. Pages & portals Actions)-> manage-> all settings

  It will take you to the page view of all of the current portal (i.e. MyPortal1).

  Then click attributes in the left pane, and you can create/edit/delete the custom attributes for the current portal on the right side.

  • Click Add an attribute and specify the following information:

  Attribute name = myvar

  This is the attribute that we will refer to any page using the EL "MyVar".

  Attribute value = #{param.myvarval}

  "Myvarval" is the name of the query parameter (i.e. suffix query param & myvarval = TestSuccess will be passed as part of the URL later)

  • Now, create a new page "TestPage" and add the element of HTML markup on the page using the composer.
  • In the Properties window, change the HTML markup element.

  Replace the existing value

  #{componentExtensionBundle.OUTPUT_TEXT_TEXT}

  with

  #{spaceContext.currentSpace.metadata.customAttributes ['myvar']}

  • Click apply and then click OK to close the pop-up window.
  • Click on save and view Portal

  
  

  • CHECK: Replace/change the URL the following OR open in a new tab in the browser

  Http://127.0.0.1:8888 / webcenter, portal, MyPortal1, TestPage ? myvarval = TestSuccess

  and you will see "TestSuccess' message in the"TestPage"rendered using the HTML markup component.

  This confirms passing the parameter to a page URL works as expected.

  Now, to add a link to the "TestPage" passing a parameter in the URL of the page in another page (Home Page say).

  • Now goto homepage, correct it in composer and add the hyperlink element. Click change to set the hyperlink in the Properties window.
  1. Set the title to display (i.e. the value of the title TestPage)
  2. Set the Destination URL by clicking on the search icon and choose "TestPage".

  Destination is defined with values that resembles

  /faces/Oracle/WebCenter/page/scopedMD/sf5926dd1_9e6a_45ab_a99c_d79fabb362c0/Page1.JSPX

  Add a suffix '& myvarval = TestWorks' to him.

  • Click apply & OK.
  • Click on save and view Portal
  • CHECK: Since your home portal or the home page, click on the link "TestPage" which brings you to the TestPage and you will see "TestWorks' message in the"TestPage"rendered using the HTML markup component.

  I hope it helps.

  References:

  How to pass a parameter of argument the query URL to a parameter input workflow? (Doc ID 1545808.1)

  https://mosemp.us.Oracle.com/epmos/faces/DocumentDisplay?ID=1545808.1

  Works with the global attributes in portals

  http://docs.Oracle.com/CD/E29542_01/WebCenter.1111/e27738/wcadm_ps_attrib.htm#WCADM11701

• In the parameter of size of memory to the CBD

  I was at the parameter inmemory_size 200 MB, when I bounced my database the value show is 208 MB. Can you help me understand why it turns into 208 MB while that bounce?

  sys@CDB1 > alter system set inmemory_size = 200M scope = spfile;

  Modified system.

  Elapsed time: 00:00:00.09
  sys@CDB1 > display inmemory_size

  VALUE OF TYPE NAME
  --------------------------------------------- ----------- -------------------------
  inmemory_size big integer 0
  sys@CDB1 >
  sys@CDB1 > shutdown immediate;
  The database is closed.
  The database is dismounted.
  ORACLE instance stops.
  ERROR:
  ORA-12514: TNS:listener is not currently of service requested in connect descr

  
  WARNING: You are more connected to ORACLE.
  sys@CDB1 > start
  SP2-0640: not connected
  sys@CDB1 >
  sys@CDB1 > exit

  C:\Users\179818 > set oracle_sid = CDB1

  C:\Users\179818 > sqlplus/nolog

  SQL * more: Production of the version 12.1.0.2.0 on Mon Mar 23 18:08:38 2015

  Copyright (c) 1982, 2014, Oracle.  All rights reserved.

  slow motion > Connect sys/oracle as a sysdba
  Connect to an instance is idle.
  slow motion > start
  ORACLE instance started.

  Total System Global Area 1660944384 bytes
  Bytes of size 3046320 fixed
  989856848 variable size bytes
  436207616 of database buffers bytes
  Redo buffers 13729792 bytes
  218103808 region in memory bytes
  Mounted database.
  Open database.
  idle >
  slow motion > Connect sys/oracle@cdb1 as sysdba
  Connected.
  sys@CDB1 > display inmemory_area
  sys@CDB1 >
  sys@CDB1 > view the inmemory parameter

  VALUE OF TYPE NAME
  --------------------------------------------- ----------- -------------------------
  inmemory_clause_default string
  inmemory_force string by DEFAULT
  inmemory_max_populate_servers integer 2
  inmemory_query string ENABLE
  whole big inmemory_size 208M
  inmemory_trickle_repopulate_servers_percent integer 1
  optimizer_inmemory_aware Boolean TRUE
  sys@CDB1 >
  sys@CDB1 >

  In addition to what others have said, I suggest that you set the value in memory for each PDB.

  If you do not have each PDB will inherit the default PIC, which means that any an APB could consume all available memory.

  See the table in the doc

  https://docs.Oracle.com/database/121/Admin/memory.htm#BABJEHAJ

  In a multi-tenant environment, the setting of this parameter in the root is the setting for the database entire container multi-tenant (PEH). This adjustable parameter in each plug-in database (PDB) to limit the maximum size of the column for each PDB IM store. The sum of the values of the PDB may be less than, equal, or greater than the value of the CBD. However, the value of the CDB is the maximum amount of memory available in the store column IM for the full CDB, including the root and all PDB files. unless this parameter is specifically set for a PDB file, the PDB inherits the value of the CBD, which means that the PDB can use all available for the CBD column IM warehouse.

  You can also specify a compression level for objects that you plan to store in memory. The compromise is compared to the performance space.

• Ignore the size of a stroke during the transformation of an object

  Why, suddenly, changing the stroke on an object changes the dimensions of the object in the processing window? If I draw a carrΘ, 100 x pt 100 pt with no line, the transformation panel says it's 100 x 100 pt pt. If I add a stroke of 1 pt around the place, Transform said now that the object is 102 x 102 points pt (assuming that I said to draw the line outside of the object).

  
  

  Illustrator did not that above all this week. I accidentally changed a parameter? Is this one of the Adobe without end useless 'improvements '?

  
  

  I don't want it to do this. I want it to ignore the size of the race when you move an object or view the dimensions of an object.

  
  

  P.S. Don't tell me that illustrator always behaved this way. There can be no.

  
  

  Particularities: Illustrator Mac OS 10.10.3 CC 2015.

  
  

  Thank you.

  You can toggle the option use an extract from the limits in the General preferences or in the drop of the alignment pallet.