In the parameter of size of memory to the CBD

Similar Questions

• What happens when managed, segment size of memory the server has

  Hi all

  Can anyone provide some information on what happens after reaching the size of memory managed server segment by... We are on 11.1.2.3. Our is a compact deployment with EAS, APS, RA, WA, web applications deployed on the single managed server work space. Our chunk size is set to 8 000 MB (8 GB) and I'm trying to understand what happens once the limit is reached, I tried searching for an answer in the forums of Weblogic, but did not find anything. So maybe if someone could shed some light on what would help a lot.

  Thank you
  Ted.

  I expect the Dungeon of increasing size until the segment maximum + fresh General, the gc must retrieve the memory to be allocated again and is not released to the OS.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• T430 - maximum size of memory supported?

  Hi all!

  I got the thinkpad with lenovo 23511 t430 has 8 motherboard, I have also 4 GB of ram...

  What is the maximum size of memory ram support?

  THX...

  You should be able to use 2 strips of 8 GB of RAM for a total of 16 GB.

• Restore the CBD

  Hello

  I took the backup of the CBD with RMAN for oracle 12 c. Please let me know how to restore the CDB.

  Thank you

  Siradji

  You can use the same commands to restore the entire CBD or DPS depending on your RMAN connection. If you have a full backup of the CBD, it will also inlcude all PDB.

  If a data file is missing, you can use the RMAN LIST FAILURE, FAILURE of ADVICE and the FAILURE of the REPAIR:

  For example:

  SQL> alter pluggable database pdb2 open;
  alter pluggable database pdb2 open
  *
  ERROR at line 1:
  ORA-01157: cannot identify/lock data file 29 - see DBWR trace file
  ORA-01110: data file 29: '/u01/app/oracle/oradata/cdb2/pdb2_1/ldata_01.dbf'
  

  [oracle@vm601 ~]$ rman target /
  
  Recovery Manager: Release 12.1.0.1.0 - Production on Mon Jun 29 18:46:31 2015
  
  Copyright (c) 1982, 2013, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: CDB2 (DBID=610855196)
  
  RMAN> list failure;
  
  using target database control file instead of recovery catalog
  Database Role: PRIMARY
  
  List of Database Failures
  =========================
  
  Failure ID Priority Status    Time Detected Summary
  ---------- -------- --------- ------------- -------
  8          HIGH    OPEN      29-JUN-15    One or more non-system datafiles are missing
  
  RMAN> ADVISE FAILURE;
  
  Database Role: PRIMARY
  
  List of Database Failures
  =========================
  
  Failure ID Priority Status    Time Detected Summary
  ---------- -------- --------- ------------- -------
  8          HIGH    OPEN      29-JUN-15    One or more non-system datafiles are missing
  
  analyzing automatic repair options; this may take some time
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=46 device type=DISK
  analyzing automatic repair options complete
  
  Mandatory Manual Actions
  ========================
  no manual actions available
  
  Optional Manual Actions
  =======================
  1. If file /u01/app/oracle/oradata/cdb2/pdb2_1/ldata_01.dbf was unintentionally renamed or moved, restore it
  
  Automated Repair Options
  ========================
  Option Repair Description
  ------ ------------------
  1      Restore and recover datafile 29
    Strategy: The repair includes complete media recovery with no data loss
    Repair script: /u01/app/oracle/diag/rdbms/cdb2/cdb2/hm/reco_1473098899.hm
  
  RMAN> repair failure;
  
  Strategy: The repair includes complete media recovery with no data loss
  Repair script: /u01/app/oracle/diag/rdbms/cdb2/cdb2/hm/reco_1473098899.hm
  
  contents of repair script:
    # restore and recover datafile
    sql 'PDB2' 'alter database datafile 29 offline';
    restore ( datafile 29 );
    recover datafile 29;
    sql 'PDB2' 'alter database datafile 29 online';
  
  Do you really want to execute the above repair (enter YES or NO)?
  

• Application of computer Virtual Image precompiled App development database: start of the CBD fails with ORA-12514

  Hello

  I have a few questions about the pre built Database App Development VM image.

  I am trying to use it to familiarize myself with Oracle 12 c and would like to receive feedback on the following points:

  1. When you open a terminal session and then trying to connect as the sysdba, it automatically connects me to the ORCL PDB. How does this happen? I have just a sqlplus/nolog followed normal con sys/oracle as a sysdba. My ORACLE_SID is set to cdb1. Thank you I can change session at the root, etc. - my query is how by default does me to the ORCL PDB?
  2. If I connect to the container root of the CBD, namely sqlplus sys/oralce@cdb1 and then issue an immediate halt, the CBD closes down, but in the process gives an ORA-12514 error - after that I am unable to start CDB, as shows the ORA-12514 error when I try to sys/oracle@cdb1 conn - TNS:Listener is not currently of service requested in connect appears.

  For directions to the two above would be appreciated.

  Thank you, Mohan

  All,

  Well, I have fixed it for myself.

  TWO_TASK env var has been ORCL beforehand to be close the CDB.

  Disabling then close the container and restarting it fixed my error ORA-12514.

  Kind regards

  Mohan

• 12 c: ORA-65049: creating local user or role is not permitted in the CBD$ ROOT

  Last night, I installed Oracle 12 c on OEL 6.4. See Oracle Spatial installation and graph 12 c on OEL 6.4 .

  Today, I tried to create a test user following a syntax which worked for 11g but I got a permission error.

  $ sqlplus sys as sysdba

  SQL * more: Production of the version 12.1.0.1.0 Wed Jun 26 07:08:11 2013

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  Enter the password:

  Connected to:

  Database Oracle 12 c Enterprise Edition Release 12.1.0.1.0 - 64 bit Production

  With the options of partitioning, OLAP, advanced analytics and Real Application Testing

  SQL > GIVING DBA, CONNECT, RESOURCE to STEVE IDENTIFIED BY dbl-secret-pwd;

  GRANT DBA, CONNECT, RESOURCE to STEVE IDENTIFIED BY dbl-secret-pwd

  *

  ERROR on line 1:

  ORA-65049: creating local user or role is not permitted in CBD$ ROOT

  Any ideas why I get this error in 12 c?

  Hello

  Its new, so I think that you must first create the PDB (plugable DB), then you can create user as part of the PDB not covered by the CBD (DB container),

• BlackBerry smartphones what type and size of memory card the "BOLD" support?

  I would like to replace the 1 GB memory card that comes with my "BOLD" with a larger size. What type of card, should I try to get, and what is the maximum size supported? I have been informed of stories contradictory on what I should look for any help would be appreciated. Thank you

  You are welcome!

  Here is a link to the Wiki entry that gives a good discussion on SD cards...

  http://en.Wikipedia.org/wiki/Secure_Digital_card

  So, this coupled with the information of KB of RIM, would say that BB must be compatible with SDHC cards... because they are (according to the level of the OS) compatible with SD cards 4 GB in size (for vs SD SDHC cutoff point.

  See you soon!

• What is the size of memory and what is the speed of the creative cloud?

  What is the size of the memory of the creative cloud and it's a replacement for a bigger hard drive?

  Please check: size of the installation file. CC and CS6 apps

• View the size of memory for Equium A100-233

  Hi I have laptop very an Equium A100-233.
  In the specifications, it indicates that the built-in display memory can be up to 128 MB.
  The problem is that the driver has 64 MB max.
  As the memory is shared with the system memory, I guess I do need a MEMORY larger bar, so I put a 1 GB DIMM in there now, but it still says 64 MB max.
  So is there a setting I need to change to make 128 MB?

  I also think that you have the Satellite A100-233 and not a satellite.
  I put t found any unit Equium bearing that number.

  However, the specification says the laptop supports an Intel 950GM 8 MB to 128 MB shared memory.
  Upgrade memory max could be up to 4 GB. Then perhaps you need to install more memory to use the 128 MB

  But if it is not a special option for graphics memory changes so I assume that the driver will check the value of memory.

• Size of memory R830 HDD satellite

  I recently bought a Satellite R830 - 1 1.
  It was announced as having with 320 GB HDD memory size. However, the HARD drive does that 282GB total memory size.

  Anyone with this model had the same problem? How do solve you?

  There is no problem at all. Preinstalled OS uses small partition recovery, recovery partition Toshiba is it also and it is not included in quality when check you it in windows Explorer.

  Open the disk management option and there you can see the exact structure of the partitions.

• Maximum size of memory card from blackBerry Smartphones.

  I was wondering what is the maximum memory capacity that the OS is capable of reading / acknowledging.  I know that the 2 TB SD micro card is not programmed to be released for almost a year or two, but our storms would even be able to use this much memory size?  Thank you

  Support memory card max depends on your operating system devices.

  Please find below the details-

  Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

  BlackBerry Device Software media card size limit

  BlackBerry Device Software 4.2.0 up to 2 GB

  BlackBerry Device Software 4.2.1 up to 4 GB

  BlackBerry Device Software 4.2.2 up to 4 GB

  BlackBerry Device Software 4.3.0 up to 8 GB

  BlackBerry Device Software 4.5.0 up to 8 GB

  BlackBerry Device Software 4.5.0.81 and more up to 16 GB

  BlackBerry Device Software 4.6.0 and later up to 32 GB

• Custom partition sizes and memory system for ESXi 4.1

  With ESX 4.0, I would customize my partitions during the installation (see below). With ESXi 4.1 GUI there is no option to customize the scores.

  Now is the best practice to take default values? If not, what are the ESXi 4.1 recommended sizes of partition and how do you custtomize them?

  What memory system. In the past, I would rise to 800MB (1/2 of the swap partition). ESXi 4.1 design requires no it more? I can't change that vcenter as I could before.

  Who wish to understand best practice in this version build information.

  root (/) 5120

  swap 1600

  var 4096

  Home 2048

  opt 2048

  tmp 2048

  You cannot change the size of the partition. If this is embedded (installed to USB) then ESXi will use total 1 GB. In the case of installation (installation on a hard drive) ESXi will use 1 GB and create a separate partition from scratch 4 GB.

• Boolean FPGA size in memory

  LabVIEW stores Boolean values as a U8 in memory article.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvconcepts/how_labview_stores_data_in_memory/

  My question is what happens when you expand in FPGA? More precisely if I made 8 tables of choice with the data type in a Boolean value, which takes the same amount of resources as a single table to match U8? Or it takes fewer resources than 8 tables U8?

  HERE you can find out exactly how much space is used by different things on the FPGA target.

  Normally a logical structure of X - bit consume X bit from FPGA has no limitation in this regard.

  Shane.

• Synchronization between the CBD and the PDB 12 c

  Hello

  I read the following the my 12 c new student guide:

  If a common to users and roles had been created beforehand, the PDB new or closed must be synchronized to retrieve new common users and roles of the root. The synchronization is performed automatically if the PDB is opened in read-write mode. If you open the PDB in read-only mode, an error is returned.

  SQL> select version from v$instance;
    12.1.0.1.0
  SQL> sho con_name
    CDB$ROOT
  SQL> select con_id,name, open_mode from v$pdbs;
    2 PDB$SEED            READ ONLY
    3 PDB2_1              READ ONLY
  SQL> create user c##dude identified by dude;
    User created.
  SQL> select * from PDB_PLUG_IN_VIOLATIONS;
    no rows selected.
  SQL> drop user c##dude cascade;
    User dropped.
  
  User dropped.
  
  

  If I understand the student's guide, creating a common root user $ CBD can be created, modified, dropped when the PDB is mounted mode, but read-only must return an error.

  Any ideas that I can not reproduce this behavior?

  Thank you!

  I suggest that repost you this thread in the forum shared.

  Re-read that quote you posted.

  In your example the PDB is NOT closed when you created the common user.

  For this purpose, you do not have "open the PDB in read-only mode after having created a common user.

  Common users must have privileges in all PDB files.

  If you create a common user when a PDB file is closed the PDB data dictionary entries will not be updated.

  When you open then the PDB in view write Oracle detects that the PDB data dictionary is out of sync and refresh it. It cannot do this if you open the PDB read-only.

• How to recompile PKG not valid in the PDB by referring to the CBD as LINK of METADATA

  Hello

  I would like to recompile invalid package belonged to SYS in PDB. This package point as METADATA LINK to package in the SYS schema in CBD (it has been recompiled successfully in CBD previously).

  See scenario:

  sqlplus sys/[email protected]/cdb_db as sysdba

  SQL > select status, owner, object_name, con_id from cdb_objects where object_name = 'HTMLDB_SYSTEM' and object_type 'PACKAGE Body ';

  OWNER OF CON_ID

  OBJECT_NAME

  STATUS

  ------ ---------- ---------------  --------

  	1 SYS	HTMLDB_SYSTEM	VALID
  	2 SYS	HTMLDB_SYSTEM	Not valid
  	3 SYS	HTMLDB_SYSTEM	Not valid

  SQL > alter session set container = pdb12;

  Modified session.

  SQL > show con_id

  CON_ID

  ------------------------------

  3

  SQL > select owner object_name object_type, status, sharing, con_id from cdb_objects where <>of status "VALID."

  OWNER OBJECT_NAME OBJECT_TYPE STATUS SHARING CON_ID

  --------- -------------------------- --------------- ------- ------------- ----------

  SYS HTMLDB_SYSTEM PACKAGE METADATA BODY NO VALID LINK 3

  APEX_PKG_APP_INSTALL_LOG PUBLIC SYNONYM OF METADATA NOT VALID LINK 3

  SYS HTMLDB_SYSTEM PACKAGE METADATA BODY NO VALID LINK 2

  APEX_PKG_APP_INSTALL_LOG PUBLIC SYNONYM OF METADATA NOT VALID LINK 2

  SQL > change the SYS package. HTMLDB_SYSTEM compile body;

  change the SYS package. HTMLDB_SYSTEM compile body

  *

  ERROR on line 1:

  ORA-65040: operation not allowed a pluggable database

  How to compile HTMLDB_SYSTEM in PDB when more metadata referring to CBD link?

  
  

  Hello

  Check this note

  HTMLDB_SYSTEM package is not valid after deletion APEX (Doc ID 1231863.1)

  HTH

  Anuj