Relevance of the parameter PGA_AGGREGATE_TARGET

Similar Questions

• Oracle ignores the parameter max_dispatchers

  Hello
  
  Does anyone know why Oracle would ignore the parameter of max_dispatchers?
  
  [root@prod1 ~] # sps d00
  Oracle 1507 1 0 16:34? 00:00:04 ora_d000_prod1
  Oracle 1509 1 0 16:34? 00:00:03 ora_d001_prod1
  
  You can see both above. I can see in the alert log for the two database to start:
  
  [root@diag1 bdump] # less alert_prod1.log
  db_file_multiblock_read_count = 16
  db_create_file_dest = + DISKGROUP1
  db_recovery_file_dest = + DISKGROUP1
  db_recovery_file_dest_size = 51539607552
  standby_file_management = AUTO
  db_flashback_retention_target = 2880
  UNDO_MANAGEMENT = AUTO
  undo_tablespace = UNDOTBS1
  UNDO_RETENTION = 1800
  Remote_login_passwordfile = EXCLUSIVE lock
  db_domain =
  service_name = prod, prod1
  dispatchers = (protocol = TCP), DESCRIPTION (SDU = 32768) = ((ADDRESS = (PROTOCOL = TCP)))
  SHARED_SERVERS = 1
  max_shared_servers = 8
  MAX_DISPATCHERS = 1
  LOCAL_LISTENER = LISTENER_PROD1
  session_cached_cursors = 128
  JOB_QUEUE_PROCESSES = 10
  CURSOR_SHARING = SIMILAR
  background_dump_dest = / oracle/admin/prod1/bdump
  user_dump_dest = / oracle/admin/prod1/udump
  core_dump_dest = / oracle/admin/prod1/cdump
  audit_file_dest = / oracle/admin/prod1/adump
  db_name = prod
  db_unique_name = prod1
  open_cursors = 4096
  optimizer_mode = FIRST_ROWS_10
  pga_aggregate_target = 1881145344
  optimizer_dynamic_sampling = 4
  dg_broker_start = TRUE
  PMON started with pid = 2, OS id = 1485
  PSP0 started with pid = 3, OS id = 1487
  MA started with pid = 4, OS id = 1489
  DBW0 started with pid = 5, OS id = 1491
  LGWR started with pid = 6, OS id = 1493
  CKPT started with pid = 7, OS id = 1495
  SMON started with pid = 8, OS id = 1497
  RECCE has started with pid = 9, OS id = 1499
  CJQ0 started with pid = 10, OS id = 1501
  MMON started with pid = 11, OS id = 1503
  Tue may 11 16:34:08 2010
  commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
  MMNL started with pid = 12, OS id = 1505
  Tue may 11 16:34:08 2010
  commissioning 1 dispatcher (s) for '(DESCRIPTION =(SDU=32768) (ADDRESS =(PROTOCOL=TCP)))' network address...
  commissioning or shared server 1...
  MICHAEL started with pid = 16, OS id = 1513
  Tue may 11 16:34:08 2010
  ALTER DATABASE MOUNT
  
  Now, he is a Dataguard configuration. Is there a dispatcher for the Dataguard thus by default? Regardless of my settings?
  
  The version of the Oracle database is:
  
  10.2.0.4.0
  
  Thanks for your time.

  MAX_DISPATCHERS specifies that the maximum number of allowed dispatcher process to run concurrently. It can be replaced by the DISPATCHERS parameter and is retained for backward compatibility with older versions.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/initparams115.htm#I1010102

• configuration dll when the parameter is of type STRUCT

  Hi all

  I use call library funtion to bind to one of the DLL, but my question is is the parameter to pass to STRUCT type and I do not know how to configure this feature.

  If you pass the struct by reference, then choose Yes, adapted to the Type.  It does not matter what you choose "Data Format", because the grapes are always passed by reference.  If you pass the struct by value, then pass each element of the structure as a separate parameter without using a cluster, as described here.

• Ramping blamed the parameter in the profile of Stimulus Editor.

  Hello

  I am trying to familiarize themselves with the new Stimulus profile editor and encounter a problem I don't know how to solve.

  I have a model-driven setting. In one of my unit tests that I want to make a mistake on this parameter and the fault should scale the value exactly as the ramp function.

  I can do this within the profile of Stimulus editor himself or how can I do?

  / Johan

  You can do this with a custom real-time sequence. The easiest way would be to make a copy of the sequence of integrated ramp and modify it slightly to a fault of the parameter output instead of a simple assignment. You can open this sequence simply by double clicking it in the palette in sequences. If you open the sequence in real time of the ramp in the standard library, you will see the line where he attributes the current value of the ramp to the output parameter:

  RampOut = (I * Increment) + InitialValue

  All you have to do to change this from a standard to a fault assignment as assignment follows:

  fault (RampOut, (I * Increment) + InitialValue)

  Note there is a bug in the VM of real-time sequence that could not completely error a channel of the system unless another channel is currently failing. The easy solution is to create a dummy user and fault channels it in Manager fault channel of dialogue for the duration of your test.

• code error 80070057 the parameter is incorrect

  Hello

  I have a server with Windows server 2003. I have a problem when I try to add a new user role in a portal Application COM + system applications displays the following message:

  An error caused while processing the last operation:

  error 80070057 the parameter is incorrect.

  System has been installed to update security for windows server 2003 recently. Is it possible to fix it, or maybe I need to uninstall the security updates?

  Thanks in advance,

  Kind regards

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to get the parameter values of a step type custom when I create file and adding a type of step seq

  I use lv 8.5 and teststand 4.0.

  I did a step type custom and recorded at the MyTypes.ini in pallets of type.

  I specified a default module by opening the properties of the custom step of *.ini type window, then I put some values of the parameters.

  T1) when I open teststand and I add the custom step type manaully in seq file, the labview module parameter values are represented.

  But, if to use file (create and add support prototype stage), the labview module parameter values has the default value.

  Using joint file, how to get the setting custom step type values I put in *.ini?

  Q2) each type of step are automatically by name through the use of LoadTypePaletteFilesEx. When I open teststand and I add the custom step type manaully in seq file, the module is loaded automatically. Inside the attachment, I use a prototype of charge and a fixed path where the module labview is to load the labview module.

  Can I load module automatically without using a prototype of charge or how can I get a dynamic path of type step?

  I solved Q1 for myself by using the mapping tab of the parameter within the configuration to the default module window.

  Everyone knows Q2?

  Thank you.

• Change the parameter [] strings in a sub - bound dynamically VI

  I'm in a situation where I need to use the sub-panels to dynamically bind subVIs for data entry. I also like having the calling VI to change the [] parameter strings several enumerations in the Subvi, but this doesn't seem to be possible, as the Subvi is not in edit mode. Does anyone know of a way around this?

  I read data from a file to initialize the enums, so that I can have the Sub - VI read the file instead, but I was hoping to do it once in the main VI and send strings to the subVIs to speed up execution.

  Thank you!

  derekemuff wrote:

  I read data from a file to initialize the enums, so that I can have the Sub - VI read the file instead, but I was hoping to do it once in the main VI and send strings to the subVIs to speed up execution.

  It's impossible.  Enums are set in stone at run time.  Oh wait, you try to use the script running.  Sorry, it does not work.  Note that the property for the [Strings] node for the enum is blue?  That tells you it is a script node and is useful for mounting screws over time edit.

  As RavensFan said, you use a ring.  Their data type is a real number.

• System Update Readiness Tool Vista installation error - error: "the parameter is incorrect."

  I have a virtual machine running Vista. I need to update with the SP1 and SP2 for Vista and the VS SP1.

  I have downloaded and saved the 3, but when I tried to install SP1 for Vista I got an error that says I need to run the Vista system update tool. I downloaded the analysis tool, but when I tried to install it on the virtual machine is a mistake here:

  "The parameter is incorrect."

  There was no error number.

  [It is ironic to get an error during the installation of software that is supposed to fix the errors of installation...]

  What should I do now?

  Hi MeProgrammer,

  Temporarily disable the antivirus software on the computer as a test and try to install the update and check if this is useful to fix the problem.

  If disabling the antivirus software works, then you need to configure the same so that it does not disturb. Please contact the software vendor for assistance in this regard.

  Warning

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Additionally, make sure that you download and install the correct version (32-bit or 64-bit) system from the link below for Windows Vista Update Readiness Tool:

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  In addition, I recommend you check the following logs for more information:

  %SystemRoot%\Logs\CBS\CheckSUR.log
  %SystemRoot%\Logs\CBS\CheckSUR.persist.log

  I hope this helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cannot copy AVSEQ01: the parameter is incorrect

  It is a copy of a publication in the field of technology, I did. If this isn't the appropriate forum, let me know where to post. Thank you.

  I'm having a problem. I am trying to copy a. DAT file to a VCD on my hard drive. This particular file is between 600 and 650 MB. When you try to copy the file, I get the following error message: cannot copy AVSEQ01: the parameter is incorrect

  There are two others. DAT files on the CD that I am able to copy, the most important of which is only 13 MB.

  I'm on a Win XP SP3 update. Readers to that I copy are NTFS.

  The last time I had a similar error I was copying MP3 to DVD files on my hard drive. I found myself finally Mac sister to borrow and copy the files to an external hard drive.

  I would prefer not to have to do. Help.

  Thank you.

  Hello

  The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• I get a message "the parameter is incorrect" when I try a Windows Media Player security upgrade. What I'm doing.

  I get a message "the parameter is incorrect" whwn I try a Windows Media Player security upgrade. What should I do?

  Hello

  1 have. what security update you tried?
  2. in addition, what version of Windows Media Player you have?

   
   
  Try these steps and check.
  a. Click Start and type cmd in run and press ENTER.
  b. in the type guest following command press ENTER.
  WMP.dll regsvr32.exe.
  c. close the command prompt and start Windows Media Player and check.
   
   
  I hope this helps.
  
   

• What is the parameter to open WMP directly in "media library"?

  WMP 9 on Win XP

  I can't upgrade machine company

  What is the parameter to open WMP directly in "media library".

  "C:\Program Files\Windows Media Player\wmplayer.exe" /?

  Seek and you shall find

  Found:

  / Task MediaLibrary

• Error code; The parameter is Incorrect

  My operating system is "Windows XP Home." I tried to print a multitude of photos using the "Photo Print Wizard." When I click the link icon in the "picture and Fax Viewer", I get the error code; The parameter is Incorrect. The wizard does not open. I noticed that the icon in the 'Control Panel' folder has changed and the name is 'File' rather than 'printers and faxes '. I made every effort to change, including to remove and reinstall my printer but nothing helped. I can't delete the file or find the root of this folder in 'windows '. It seemed to me that the path of the file has been changed due to a change of name of this file in the path. However, I can still use a printer installed by other software to print. By the way, when I reinstall any printer, I do not see the printer in this file but it always says 'File' in the 'control panel '. The shimgvw.dll file is registered correctly as I can tell. If I try to launch 'Photo and Print Wizard' from the link on the left in the "Control Panel" itself, I just get a beep for error but no error code. The wizard does not start. This wizard is a very important tool to print multiple selections at once. I havn't used in awhile, so I don't know when it is first of all changed. Any thoughts?, anyone? Is there another install name of the package in the wizard to reinstall it from Microsoft?

  THIS WILL SOLVE THE PROBLEM

  1. Click Start> run type REGSVR32 photowiz.dll click OK

  NOTE: leave a space between the two.

  FACT!

  This will re - save the "TheAssistant printing photographs"and it will work from the folder 'My pictures'.

  * However, this does not resolve the question "renaming" of the file folder in the 'Control Panel', 'printers and faxes '.   That remains a mystery, I hope I can solve.

  2. If you are unsure if you have this module, DO a SEARCH using the search tool in the "Start Menu".

  3. If the search shows nothing in the directory... (drive letter) \Windows\System32, and then search the directory(drive letter)\WINDOWS\ServicePackFiles\i386, Scroll to module; photowiz.dll and 'Copy and paste' to your windows folder directory as described above. Depends on your drive letter on which you originally installed "Windows XP". It is usually a letter'C'.

  5. If you had to 'Copy and paste' this module in your operating system folder. Then, you must re-register the above method module.

  Thank you, GARTH

   

• windows\system32\rundll32.exe the parameter is incorrect. Cannoy get access to certain programs and cannot access the "msconfig".

  I get the windows\system32\rundll32.exe error following the parameter is incorrect. I tried a repair Rundll32 loading, but the computer will not accept. All microsoft and windows updates are up-to-date BLAH today. What to do next? When I try to use the box of computer help, a black box appears for about 1 second and the computer does nothing.  Not lock up and I can still do emails, just no game.

  Please run Doug Knox fix .exe (which is not a file .exe so you can run it) and then carefully swipe to the malware.

  http://www.dougknox.com/XP/file_assoc.htm
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• File backup failed. The error is: the parameter is incorrect. (0 x 80070057).

  I get the following error when I run "back up files" and tries to access "backup setting change" (only).

  I tried most option all found on TechNet to see disp.

  No problem running "full pc upwards."

  Log name: Application
  Source: Windows Backup
  Date: 09/11/2011 11:19:55
  Event ID: 4104
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: desktop
  Description:
  File backup failed. The error is: the parameter is incorrect. (0 x 80070057).
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      4104
      2
      0
      0 x 80000000000000
     
      21308
      Application
      Desktop
     
   
   
      The parameter is incorrect. (0 x 80070057)
      57000780E00400005B0600005C060000420ED1665C2BEE174B64529CB14610EA71000000
   
  

  Help, please

  Phillip

  Hello

  Make the SFC (System File Checker) scan and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Hope this information helps.

• Why did I several drivers who say the parameter is incorrect, but updayes say that I have the most up to date?

  sound driver dvd driver keyboard driver...

  whenever I plug in a usb device and it installs a driver it says the parameter is incorrect, most control panel has several flags to say drivers setting is incorrect...

  Update all the drivers manually.

  What is the make & model of the system?