Oracle on VMware Fusion?

Similar Questions

• Install Oracle Linux 6 update 2 in vmware fusion

  Then I looked around and it seems that there is a bug in the oracle linux distro that causes the screen to be cut in the installation program.

  The solution which is given anywhere is for vm workstation and go into the settings of the virtual machine, and configure the virtual machine display to have a screen at 1024 x 768.  Save the settings.

  However in vmware fusion 4.1 I don't seem to have that option.

  Does anyone know another solution for this?

  Thank you

  Mike

  Hi dalupus,

  The quick and easy solution is just use the keyboard... on most pages Installer, simply pressing enter move you to the next screen, even if there is no Next button visible.  If you change something on one of the pages of the Setup program, the Enter key may not work... In this case also, Alt-N should be is to click on the button "Next" invisible.  With my keyboard, it's the - N Option; You may need to adjust your keyboard and layout.  I can use this technique to make throughout the Oracle Linux 6 update 2 installation on Fusion here.  After restarting the virtual machine in the second stage of the installation, you will see at least the half top of the keys.  Once the operating system is configured and that you log the guest operating system, follow the instructions in KB to install the correct video driver in the comments.

  If you prefer to do the next button appear correctly from the start, you will need to change the configuration of your virtual machine file to include:

  SVGA. AutoDetect = "FALSE".

  svga.maxWidth = "1024".

  svga.maxHeight = "768".

  Make sure that you remove these two lines, once the client's video driver is set to day, otherwise, the virtual machine display stuck at 1024 x 768.

  I hope this helps!

  --

  Darius

• Can VMWARE Fusion cause multiple operating systems?

  I have VMWARE FUSION installed on my MACBook. I want to install Linux 3 boxes in the VMWARE FUSION.

  I mean, three Linux operating systems (3 knots) will be on VMWARE FUSION. Is this possible?

  Please notify.

  Thank you

  S.

  Hello

  ski123 wrote:

  I build the system Oracle RAC in my MacBook. I need to have 3 nodes of Linux in VMWARE. I know for sure THAT VMWARE SERVER can have 3 Linux operating systems.

  That should be no problem. However, VMware Server is out of order and does work not under OS X. So if I were you I wouldn't invest a lot of time in this product now.

  > But since I bought VMWARE FUSION three months ago, I don't want to buy new SERVER if the MERGER may have more than one Linux.

  Server is / was a free product. No need to buy.

  I have 4G RAM in my MacBook. My plan is to 1 G RAM for each Linux.

  Oracle Enterprise Linux is Linux.

  As the other person said, there is an amount of overhead by VM. As you can run linux clients, make sure that the 3D acceleration is not activated as it a) does not work under linux, there is no graphics acceleration driver that works right now and b) 3D acceleration uses by default an another 128 MB / VM.

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• VMware Fusion 8.0

  I plan to put VMware Fusion 8.0 on my new Mac Mini, so I can run an older version of Quicken for Mac 2006 R7. I have more than 20 years, the Quicken data files and I need to be able to access these files years every so often for the purposes of investment. Didn't like not all of the new version of Quicken for Mac, or any other software of finance personal I tested (they all seem to be cloud online version now), so I went back to the old version of Quicken, which is very stable for me (I just don't let it backup on my internal HD more).

  All the old Quicken files and the program are on my Time Capsule and another hard drive backup external.

  My old Mac Mini still works, but given that the OSX can not be upgraded beyond v. 10.6.8 some programs and Firefox work just not so well, and I was starting to think I have some security issue too.

  I could get another monitor to the old Mini and not allow access to the internet, but it would still need to save every day at least to one of the external drives. Or, I could attach it to my current monitor along the coast the new Mini, using the D - SUB cable. I've never used the D - SUB connection, so not sure how good the view will be if two Minis share the same monitor. If I could afford to buy another monitor, I'd do it, but now, money is tight after the purchase of my new Mini and a new MBP for my daughter who is in College (his old MB was a 2008 model, no place to upgrade more, so it's very, very slow).

  I read here that some people had problems of compatibility with El Capitan and Fusion, so I am wary of load on the new Mini. Are these problems solved?

  When you read about the problems? If you're careful, you can try merge free simply go to their web site to access the free trial version. You can also use VirtualBox which is free. I don't think that you will have problems with the virtual machine.

  Where you might have problems to run older versions of Quicken rather that perhaps in Quicken for Windows in your virtual machine running Windows or just the new version of Quicken for Mac without running a virtual machine. But I don't know much about Quicken.

• USB not working not not after update OSx 10.11.4 - VMWare Fusion 7.

  Hello

  I use OS x with VMWare Fusion 7. After the upgrade to OSx 10.11.4, my VMWare Fusion 7 does not support USB.

  I opened the VMWare Fusion. "When I joined the external hard drive, VMWare asked me where to connect ' Mac or Windows. What I chose, it does not work.

  Thanks in advance,

  Khine

  Try to upgrade to OS X 10.11.5

• Bootcamp Windows 7 cannot run by VMWare Fusion 8.1.0

  I use MBP (13 "mid-2010) 2.4 GHz Intel Core 2 Duo 8 GB 1067 MHz DDR3 Nvidia 320 M 256 MB

  That's what I did in chronological order

  (1) improved my MBP to El Capitan 10.11.1

  (2) my VMWare Fusion Pro 7 did not work - asked me to upgrade to version 8 to access my Windows 7 Boot Camp

  (3) no choice... I had to upgrade to VMWare Fusion... fact to 8.0.0... my Boot Camp Windows could not always run... .deleted previous Virtual Machine... again added to select Windows in boot camp...

  (4) does not work either... just got a free upgrade to VMWare Fusion 8.1.0... now the question is much worse... when I try to add my windows Boot Camp... That said:

  " Volume the Boot Camp is not prepared to stand as a virtual machine. It seems that Windows don't is is not properly stopped the last time it was used.

  "To shut down Windows properly, go to System Preferences > startup disk and set Windows as the start-up operation.

  (5) tried to run windows to startup as suggested... says NO OPERATING SYSTEM FOUND... it seems that my windows boot file is missing?

  Wait a second... (I don't know why I did... but I 'played' with the utility drive Partition and tried to expand my (not accessible) windows... between step 2) and 3) above

  Ideas to solve my problem...

  Appreciated. Thank you.

  Step 1 has caused the problem. It may be easily fixable. Can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• GPIB-usb-hs on vmware fusion

  I am running Windows 7 64-bit on an iMac with OS X 10.6.5 via VMWare Fusion. I installed the driver NOR-488. 2, but can not see my GPIB-USB-HS device. This post: http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/NI-488-2-does-work-on-Windows-XP-Mode-within-... seems to indicate that someone else has had success; his problem was using XP Mode.

  Anyone can shed some light on this? Can I expect the combination of the GPIB-USB-HS with Windows 7-64 on VMWare Fusion on an iMac to work?

  I also have a USB-6215 is working well.

  Thank you!

  John-

  I moved my virtual machine to an OS X 10.6.6 system and things did not work immediately. The GPIB-USB-HS was not visible to the MAX and in Device Manager it looks good, when when I open the property page, he says that there is no driver loaded.

  I was able to get the GPIB-USB-HS working by choosing to update the driver through the Device Manager. The steps to do this are:

  1. right click on the GPIB-USB-HS in Device Manager and select "update driver software...". »

  2. Select "Browse my computer for driver software" and then "Let me pick from a list of drivers for devices on my computer.

  3. you must be exactly a GPIB-USB-HS driver to choose. Select it and click Next.

  4. once it finished, view the properties of the device and make you it is said "this device is working properly."

  I did the same test for validating a single request with the device, but it seems to work.

  Let us know if this helps,

  Jason S.

• A product key from an old computer can be used for vmware fusion on a new mac?

  We used to own a Dell computer with windows XP Professional OS. Lately, we have switched all of our Mac computers and no longer use the old windows computer. I have the product key for this OS and I was hoping to use the CD of windows XP on VMware fusion and relocation (in order to play video games). So far, the installation was almost a success until it would not accept the old operating system product key. Is there a way to get a new product key?
  PS The only purpose is for the PC games we have.

  can I get another free product key? I still have the old computer

  you need to know if the old pc had an O E M version of windows, because

  windows OEM versions are locked to the motherboard of the PC they where first installed at.

  If the product key you have is from a version marketed Windows (non oem) you can install the version on another pc if you take away the first pc.

  in other words, a version on a pc at the same time.

  You should check with the microsoft Web site dealing with pirated software and product keys.

• I get the following error: error \mset16g.dll specified module could not be found. I am running XP on top of vmware fusion

  original tittle:msetg.161

  I get the following error: error \mset16g.dll specified module could not be found.  I am running XP on top of vmware fusion

  Hello Salim'sMailbox,.

  ·         When exactly do you receive the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Response with more information to help you further.

• switching from XP to mac with vmware fusion

  I have a HP Pavilion with pre-installed Windows XP Media Center Edition 2005. My HP just died. I would like to move my copy of Windows XP on my macbook using Vmware Fusion. I tried using the recovery discs and was a failure. I got the error message "the PC recovery discs to does NOT supported this model of PC. Is there a was to do this?

  Unfortunately, an OEM Windows XP license is not transferable to another computer.  The death of the original computer, does the license OEM Windows XP (R.I.P.)

• Vista Ultimate, mac, boot camp and VMware Fusion

  Just installed VMware Fusion 2.0 and pulled on my Boot Camp Partition. Vista looks good as a virtual machine, but told me that must be activated and that the product key is already in use. It is a commercial version of Vista and is only installed on the boot camp partition. VMWare support site was not very useful. Any thoughts?

  Hello, Greg Bazhaw,.

  Thank you for using the Microsoft Answers forum.  I've heard of virtual systems having this problem, you must activate Windows.

  To open Activation of Windows by clicking on the Start button, clicking computer, clicking Properties, and then click on click here to activate Windows now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista and VMWare Fusion 3 problem of shared folders

  Installation of the VMware tools and program 3rd party on Vista with VMWare Fusion 3 I get the message "" could not access network location //VMware-host/shared folder / "missing - Error 1606"

  Hi Vibmai,

  This behavior can occur if there is an incorrect setting in the following registry entry:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Common Administrative Tools

  You can try the steps below to make changes to the registry and get rid of the error.

  1. Click Start, type regeditin the search box start and press to enter.
  2. Locate and then click the following registry key:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  1. In the right pane of the registry editor, double-click common administrative tools.
  2. In the value data box, type the following line, and then click OK:

  %ALLUSERSPROFILE%\Start Menu\Programs\Administrative of Directors

  1. On the file menu, click Exit to quit the registry editor.
  2. Restart the computer.

  See the following reference links.
  http://support.Microsoft.com/kb/886549

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1011717

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  (http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry ) How to back up and restore the registry in Windows)

  Try these steps and let us know the answer.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sierra and VMWare Fusion 6.0.6 macOS does not?

  I just updated my MacBook Pro (mid-2015) for macOS 10.12 "Sierra", and now when I try to start the Simulator BB10, it "just hangs" «forever» (at least as long as I'm patient enough to let stand at least 10 minutes, I'll try letting it sit UAB tonight) with the 'play' button displayed in the window of the program VMWare Fusion 6.0.6.  By clicking on the 'play' button does nothing.  When I try to quit VMWare Fusion, it again me, the Simulator is 'busy' and leaves me not even exit normally.  I managed to force it to leave it in the Apple system menu.

  Before that I pay to update my VMWare Fusion to the latest version, can anyone confirm if it (and the rest of the Momentics development system) will continue to operate under macOS 'Sierra '?

  Thank you

  Ed

  Well, good and less good news.

  Good news, I installed the trial version of VMWare Fusion 8.5.0 on my macOS Sierra system 10.12 and the BB10 Simulator (at least, the latest version 10.3.2.281) works and my application can run on it!

  Less good news, it runs * very * slow.

  No 1200% slow as the virtualiation equipment turned off, but still slower than it was before.

  Just in case someone comes in the future on this issue.

  Ed

• Error Code 1606 when installing software on iMac running Windows 7 in VMWare Fusion

  I get this problem when you try to install 3rd party software: Error 1606: could not access network location \\vmware-host\Shared Folders\Pictures\

  I use Windows 7 installed as a virtual machine using VMWare Fusion v 3.

  Not sure if this is relevant - but when I open my computer, network location, 2 locations are shown: shared folders (\\.host) (y) and the files shared (\\.vmware-host) (z) -, which appear as disconnected network drives when you examine their properties.

  I hope you can help!

  Windows cannot access \\vmware-host\shared folders\desktop
  http://communities.VMware.com/message/1429202;JSESSIONID=76FEFD30AD5316F7F518CD6CBCEA3386

  Using folders shared
  http://www.VMware.com/support/WS4/doc/running_sharefold_ws.html

  Also try the Vmware forum.

  VMware Fusion® (for Mac)
  http://communities.VMware.com/community/VMTN/desktop/fusion;JSESSIONID=0E27C5D458C2F3B6185B0AB9BA13B55C

  http://www.google.com.au/search?hl=en&RLS=com.Microsoft%3Aen-au%3AIE-Address&q=%22%5C%5Cvmware-Host%5CShared+Folders%5C%22&btnG=Search&aq=f&aqi=G1&AQL=&OQ=&gs_rfai=

• BB10 Simulator square locked screen aspect ratio on VMware Fusion/Mac

  Having a problem with the BlackBerry 10 Alpha Simulator Beta for VMware Fusion 10.1 Dev / Mac OS X 10.8.2. The Simulator screen is locked to a square aspect ratio and cannot be resized. I tried to make full screen, change the zoom, which extends through OS X window, and the virtual machine upgrade, but the aspect ratio remains. See screenshot below:

  

  This makes it a problem with our Android app worn, which is completely chewed on that square screen. The entire half bottom of the app is cut off.

  On VMware Player for Windows, the screen appears like a normal phone screen:

  

  Suggestions for a report l / h correct phone on Mac Simulator?

  It seems that you use different simulators.
  Square one is for devices with physical keyboard. They have the screen resolution of 720 x 720.