Oracle query setting
Hello
We are generating SSRS reports based on Oracle DB as backend. We are using oracle 11.2.0.3. We have a request in oracle that is created on the view and lots of conditions. It takes more than 8 minutes to generate a report. What are the steps I should follow to refine the query to generate report in very less time. Can someone suggest me please.
Thank you
VI
Good to hear! The appearance to explain what now?
How long does it take?
[edit] Cartesian join are not always bad, however, they are usually a good candidate to look at on a long running (in my experience anyway) query [/ edit]
If the answer to the question, the brand is so
Tags: Database
Similar Questions
-
Question the use of Oracle query Variables
Hello
I am new to Oracle, I tried to extract the data from the Oracle database by using the following query which includes 1 variable SYSDATE_UTS, but when I try to execute the query I get an error. Please let me know what I am doing wrong and how I can fix.
Error message
-----
ORA-06550: line 4, column 1:
PLS-00428: an INTO clause in this SELECT statement
-----
Oracle query
DECLARE SYSDATE_UTS NUMBER: = (sysdate-to_date('19700101','yyyymmdd')) * 86400;
BEGIN
SELECT
INCIDENT_NUMBER,
TO_DATE (to_char ((1/86400 * REPORTED_DATE) + to_date ('19700101', 'YYYYMMDD'), "jj/mm/aaaa hh24:mi:ss"), 'hh24:mi:ss dd/mm/yyyy') as REPORTED_DATE_TIME,
GROUP_TRANSFERS
LAST_MODIFIED_BY
, to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 * LAST_MODIFIED_DATE, "mm/dd/yyyy hh24:mi:ss"), 'hh24:mi:ss dd/mm/yyyy') as LAST_MODIFIED_DATE
, (to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 * SYSDATE_UTS, ' mm/dd/yyyy'), ' mm/dd/yyyy'))-(to_date (to_char (+ to_date('19700101','yyyymmdd') + 1/86400 * REPORTED_DATE, ' mm/dd/yyyy'), ' mm/dd/yyyy')) age
CASE
WHEN (to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 * SYSDATE_UTS, ' mm/dd/yyyy'), ' mm/dd/yyyy'))-(to_date (to_char (+ to_date('19700101','yyyymmdd') + 1/86400 * REPORTED_DATE, ' mm/dd/yyyy'), ' mm/dd/yyyy')) BETWEEN 0 AND 1, THEN ' 0 - 1 days
WHEN (to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 * SYSDATE_UTS, ' mm/dd/yyyy'), ' mm/dd/yyyy'))-(to_date (to_char (+ to_date('19700101','yyyymmdd') + 1/86400 * REPORTED_DATE, ' mm/dd/yyyy'), ' mm/dd/yyyy')) BETWEEN 2 AND 4 and THEN 2-4 days
WHEN (to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 * SYSDATE_UTS, ' mm/dd/yyyy'), ' mm/dd/yyyy'))-(to_date (to_char (+ to_date('19700101','yyyymmdd') + 1/86400 * REPORTED_DATE, ' mm/dd/yyyy'), ' mm/dd/yyyy')) BETWEEN 5 AND 9, THEN 5-9 days
WHEN (to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 * SYSDATE_UTS, ' mm/dd/yyyy'), ' mm/dd/yyyy'))-(to_date (to_char (+ to_date('19700101','yyyymmdd') + 1/86400 * REPORTED_DATE, ' mm/dd/yyyy'), ' mm/dd/yyyy')) BETWEEN 10 AND 19, THEN 10-19 days
WHEN (to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 * SYSDATE_UTS, ' mm/dd/yyyy'), ' mm/dd/yyyy'))-(to_date (to_char (+ to_date('19700101','yyyymmdd') + 1/86400 * REPORTED_DATE, ' mm/dd/yyyy'), ' mm/dd/yyyy')) > 20 THEN ' Days 20 + ".
ANOTHER "UNKNOWN".
END AS AGE_GROUP
OF IncidentDataBase
and the STATE not in (4,5,6)
and rownum < 10;
END;If you run this query in sql * plus you can declare a sql * more variable, assign a numeric value according to 'now' and use in your application, i.e.
SQL > variable NUMBER of SYSDATE_UTS;
SQL > exec SYSDATE_UTS: = (sysdate-to_date('19700101','yyyymmdd')) * 86400;You would then call your request, referring to sql * more variable with a colon as SYSDATE_UTS prior to it (i.e.: SYSDATE_UTS)
SELECT
INCIDENT_NUMBER,
TO_DATE (to_char ((1/86400 * REPORTED_DATE) + to_date ('19700101', 'YYYYMMDD'), "jj/mm/aaaa hh24:mi:ss"), 'hh24:mi:ss dd/mm/yyyy') as REPORTED_DATE_TIME,
GROUP_TRANSFERS
LAST_MODIFIED_BY
, to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 * LAST_MODIFIED_DATE, "mm/dd/yyyy hh24:mi:ss"), 'hh24:mi:ss dd/mm/yyyy') as LAST_MODIFIED_DATE
, (to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 *: SYSDATE_UTS, ' mm/dd/yyyy'), ' mm/dd/yyyy'))-(to_date (to_char (+ to_date('19700101','yyyymmdd') + 1/86400 * REPORTED_DATE, ' mm/dd/yyyy'), ' mm/dd/yyyy')) age
CASE
WHEN (to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 *: SYSDATE_UTS, ' mm/dd/yyyy'), ' mm/dd/yyyy'))-(to_date (to_char (+ to_date('19700101','yyyymmdd') + 1/86400 * REPORTED_DATE, ' mm/dd/yyyy'), ' mm/dd/yyyy')) BETWEEN 0 AND 1, THEN ' 0 - 1 days
WHEN (to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 *: SYSDATE_UTS, ' mm/dd/yyyy'), ' mm/dd/yyyy'))-(to_date (to_char (+ to_date('19700101','yyyymmdd') + 1/86400 * REPORTED_DATE, ' mm/dd/yyyy'), ' mm/dd/yyyy')) BETWEEN 2 AND 4 and THEN 2-4 days
WHEN (to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 *: SYSDATE_UTS, ' mm/dd/yyyy'), ' mm/dd/yyyy'))-(to_date (to_char (+ to_date('19700101','yyyymmdd') + 1/86400 * REPORTED_DATE, ' mm/dd/yyyy'), ' mm/dd/yyyy')) BETWEEN 5 AND 9, THEN 5-9 days
WHEN (to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 *: SYSDATE_UTS, ' mm/dd/yyyy'), ' mm/dd/yyyy'))-(to_date (to_char (+ to_date('19700101','yyyymmdd') + 1/86400 * REPORTED_DATE, ' mm/dd/yyyy'), ' mm/dd/yyyy')) BETWEEN 10 AND 19, THEN 10-19 days
WHEN (to_date (to_char (to_date ('01011970 ', 'ddmmyyyy') + 1/24/60/60 *: SYSDATE_UTS, ' mm/dd/yyyy'), ' mm/dd/yyyy'))-(to_date (to_char (+ to_date('19700101','yyyymmdd') + 1/86400 * REPORTED_DATE, ' mm/dd/yyyy'), ' mm/dd/yyyy')) > 20 THEN ' Days 20 + ".
ANOTHER "UNKNOWN".
END AS AGE_GROUP
OF IncidentDataBase
and the STATE not in (4,5,6)
and rownum<>Table stores IncidentDataBase the "dates" in the number of seconds since the epoch unix?
-
How to put in Spanish, ESN CP1252, oracle character set WE8MSWIN1252
Select * from NLS_DATABASE_PARAMETERS
database character set is
Select * from NLS_INSTANCE_PARAMETERS;NLS_CHARACTERSET AL32UTF8 NLS_NCHAR_CHARACTERSET AL16UTF16 NLS_LANGUAGE AMERICAN NLS_TERRITORY AMERICA
How to put in Spanish, ESN CP1252, oracle character set WE8MSWIN1252PARAMETER VALUE --------------------------------- --------------------------------- NLS_LANGUAGE SPANISH NLS_TERRITORY SPAIN
Please suggest.
Thank you in advanceIs it really OK to convert AL32UTF8 WE8MSWIN1252?
AL32UTF8 NLS_CHARACTERSETTO
WE8MSWIN1252 NLS_CHARACTERSET
Please suggest
-
Hello World ^^
I just downloaded Oracle XE and migrated my database from MySQL to Oracle successfully.
And I'm doing/reviewing my application now especially the query syntax.
I am facing a problem, I have a request in the form below in MySQL and it works fine but when I tried it at the Oracle XE database, it cannot run :( So I'm asking for help here, I have already searched on the internet but had no luck.
SELECT A.INVOICEDATE,
*@Step1:=cast (adddate (A.INVOICEDATE, A.TERMOFPAYMENT) as date) AS STEP1, *.
*@Step2:=if (@step1 > CURDATE (), A.TOTALAMOUNT, 0) AS STEP2, *.
*@step3:=if (@step2 <>0,0,IF(DATEDIFF(CURDATE(),@step1) < = 30, A.TOTALAMOUNT, 0)) AS step 3,
T_invoice FROM has
WHERE A.STATUS = 'Open'
I can conclude the problem is based on the variable declaration in Oracle, but I still can't understand.
What I do in MySQL, it's that I want to fill the variable with the expression/logic so I can use 'than' variable more later in the other part of the query output syntax.
I used variables to be filled by value due to I can't use / select ALIAS later in the other party.
So please help to convert to Oracle query syntax. Thank you.Oracle and MySql are two different animals. You need to learn SQL and Oracle's PL/SQL.
Your SQL
SELECT A.INVOICEDATE, @step1:=cast(ADDDATE(A.INVOICEDATE,A.TERMOFPAYMENT) as date) AS STEP1, @step2:=IF(@step1>CURDATE(),A.TOTALAMOUNT,0) AS STEP2, @step3:=IF(@step20,0,IF(DATEDIFF(CURDATE(),@step1)<=30,A.TOTALAMOUNT,0)) AS STEP3, FROM t_invoice A WHERE A.STATUS='Open'
Can be writern as
select invoicedate, step1, step2, case when step2 = 0 then case when sysdate-step1 <=30 then A.TOTALAMOUNT else 0 end end AS step3 from ( select A.invoicedate, A.invoicedate+A.termofpayment step1, case when (A.invoicedate+A.termofpayment) > sysdate then A.totalamount else 0 end as step2, from t_invoice A where A.status = 'Open' )
-
Character set not supported: oracle-character-set-560
Hello
I created a page and his works fine. In a different database when I create a page occurs as error
Character set not supported: oracle-character-set-560
Thanks in advance,
RoselyneHello
Check the thread... Unsupported character set: oracle-character-set-46?-pls help!
It has the solution for this...
Thank you
Gerard -
Behavior inconsistent performance Oracle query
Consider the following query:
SELECT * FROM ( SELECT ARRM.*, ROWNUM FROM CRS_ARRANGEMENTS ARRM WHERE CONCAT(ARRM.NBR_ARRANGEMENT, ARRM.TYP_PRODUCT_ARRANGEMENT) > CONCAT('0000000000000000', '0000') ORDER BY ARRM.NBR_ARRANGEMENT, ARRM.TYP_PRODUCT_ARRANGEMENT, ARRM.COD_CURRENCY) WHERE ROWNUM < 1000;
This query is performed on a table that has 10 000 000 entries. While running the query Oracle SQL Developer or my application it takes 4 minutes to run! Unfortunately, it's also the behaviour within the application I am writing. Change the value of 1000 to 10 has no impact, which suggests that he made a full table scan.
However when the squirrel running the query returns within a few milliseconds. How is that possible? Explain plan generated in squirrel gives:
But a plan different explain is generated in Oracle SQL Developer, for the same query:
No idea how this difference in behavior is possible? I can't understand it. I tried with JPA and raw JDBC. In the application, I need to parse through 10 000 000 records and this query is used for pagination, so 4 minutes of waiting is not an option (which would take 27 days).
Note: I use the same Oracle jdbc driver into a squirrel and my application so it's not the source of the problem.
I also posted this to other web sites, for example
http://StackOverflow.com/questions/28896564/Oracle-inconsistent-performance-behaviour-of-query
OK - I created a test (below) case and got the same exact results you did 'test' - a FFS using SQL index * more. I then tested with SQL Developer and got the same results. You are 100 billion sure that you did not have two databases somewhere with the same name?
SQL> create table crs_arrangements 2 (nbr_arrangement varchar2(16) not null, 3 product_arrangement varchar2(4) not null, 4 cod_currency varchar2(3) not null, 5 filler1 number, 6 filler2 number); Table created. SQL> alter table crs_arrangements add constraint crs_pk primary key 2 (nbr_arrangement, product_arrangement, cod_currency); Table altered. REM generate some data SQL> select count(*) from crs_arrangements; COUNT(*) ---------- 10000000 SQL> exec dbms_stats.gather_table_stats('HR', 'CRS_ARRANGEMENTS', cascade=>true); SQL> ed Wrote file afiedt.buf 1 explain plan for 2 SELECT * FROM 3 ( SELECT ARRM.*, ROWNUM FROM CRS_ARRANGEMENTS ARRM 4 WHERE CONCAT(ARRM.NBR_ARRANGEMENT, ARRM.PRODUCT_ARRANGEMENT) > CONCAT(' 0000000000000000', '0000') 5* ORDER BY ARRM.NBR_ARRANGEMENT, ARRM.PRODUCT_ARRANGEMENT, ARRM.COD_CURRENCY) WHERE ROWNUM < 1000 SQL> / ------------------- | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | -------------------------------------------------------------------------------- ------------------- | 0 | SELECT STATEMENT | | 999 | 55944 | 112 7 (0)| 00:00:14 | |* 1 | COUNT STOPKEY | | | | | | | 2 | VIEW | | 1000 | 56000 | 112 7 (0)| 00:00:14 | | 3 | COUNT | | | | | | | 4 | TABLE ACCESS BY INDEX ROWID| CRS_ARRANGEMENTS | 500K| 17M| 112 7 (0)| 00:00:14 | |* 5 | INDEX FULL SCAN | CRS_PK | 1000 | | 13 0 (0)| 00:00:02 |
However, as noted earlier in this thread:
alter session set NLS_SORT = FRENCH; | 0 | SELECT STATEMENT | | 999 | 55944 | | 202 85 (1)| 00:04:04 | |* 1 | COUNT STOPKEY | | | | | | | | 2 | VIEW | | 500K| 26M| | 202 85 (1)| 00:04:04 | |* 3 | SORT ORDER BY STOPKEY| | 500K| 17M| 24M| 202 85 (1)| 00:04:04 | | 4 | COUNT | | | | | | | |* 5 | TABLE ACCESS FULL | CRS_ARRANGEMENTS | 500K| 17M| | 155 48 (1)| 00:03:07 |
Can you check your preferences of SQL Developer under database-> NLS and ensure that sorting is set to BINARY? I wonder if either he is on something else in SQL Developer or maybe your by default, the database is not BINARY and squirrel is assigning BINARY when connecting.
-
Oracle query sort by case-sensitivity
Hi all
I use the oracle 11g database.
My use case is that I have a table with the following values
Name table - test
product id productsortdescription H58098 ACETAMIDOHYDROXYPHENYLTHIAZOLE 043994 Alloy .MM.INTHICK
My query is
select * from test order by productsortdescription;
This query gives the result as it is like
product id productsortdescription
H58098 ACETA
product id productsortdescription
H58098 ACETA
produit id productsortdescription
H58098 ACETA
product id productsortdescription
H58098 ACETA
product id productsortdescription H58098 ACETAMIDOHYDROXYPHENYLTHIAZOLE 043994 Alloy .MM.INTHICK
MIDOHYDROXYPHENYLTHIAZOLE
043994 alloy. MR. INTHICK
but early output/outcome should be as below:
product id productsortdescription
043994 Alloy. MR. INTHICK H58098 ACETAMIDOHYDROXYPHENYLTHIAZOLE
like all and ACE in productsortdescription
l is in a small suitcase to C.
The NLS Session parameters are as follows
SELECT * from NLS_SESSION_PARAMETERS;
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS.,.
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI. SSXFF AM
NLS_TIMESTAMP_FORMAT-DD-MON-RR HH.MI. SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI. SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI. SSXFF AM TZR
NLS_DUAL_CURRENCY $
BINARY NLS_COMP
NLS_LENGTH_SEMANTICS BYTES
NLS_NCHAR_CONV_EXCP FAKE
Please, help me in this scenario.
One option is to use the NLSSORT function. Most of the ASCII character set defines the sort lowercase before uppercase but EBCDIC kinds of lowercase before uppercase. So you can use
with t as)
Select the id "H58098", "ACETAMIDOHYDROXYPHENYLTHIAZOLE" union str double all the
SELECT id, ' 043994 ',' alloy. Mr. INTHICK' double str
)
SELECT id, str
t
NLSSORT order (str, 'NLS_SORT = EBCDIC')
;ID STR
------ ------------------------------
043994 alloy. MR. INTHICK
H58098 ACETAMIDOHYDROXYPHENYLTHIAZOLE
Of course, if your strings can contain non-alphanumeric characters, you should check that the sort of EBCDIC order is acceptable for them as well. To check this, you can use something like
with t (str, ascii) as long as)
Select chr(level+32), level + 32 double connect by level<=>=>
)
Select str, ascii from t by NLSSORT (str, 'NLS_SORT = EBCDIC')
;
or simply do a search of the internet on EBCDIC. You can also substitute other kinds of language for EBCDIC and see if any of them meet your needs. See Appendix A of the Guide to support globalization for the list of valid values for NLS_SORT.
You say that you are on 11g - if you want to say 11.2.x, then you can use the listagg function to get a more compact view of the sort order:
with t (str, ascii) as long as)
Select chr(level+32), level + 32 double connect by level<=>=>
)
Select listagg (str) in the Group (order by NLSSORT (str, 'NLS_SORT = EBCDIC')) as EBCDIC_order
t
;
EBCDIC_order
----------------------------------------------------------------------------------------------. <(+|&!$*);- %_="">?': #@'="abcdefghijklmnopqr~stuvwxyz[^]{ABCDEFGHI}JKLMNOPQR\STUVWXYZ0123456789
Kind regards
Bob
(+|&!$*);-> -
Hi all
My env is: oracle 10 g 2 on RHEL4.0, Dell power edge 7 series.
My Q? is
is - the AWR report useful to see why the slow query exec?
Initially this setting must be considered for adjustment for a particular query.
Kind regards
KKMany things come into play with regard to tuning.
Initially this setting must be considered for adjustment for a particular query.
I always start with the execution plan.
These discussions could help you understand about what you can do:
When your query takes too long: when your query takes too long...
How to post a SQL tuning request: HOW TO: post a request for tuning SQL - model poster statementIn addition, you need to explore the
Oracle® Database Performance Tuning Guide: http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/toc.htm
and do some research on this forum and http://asktom.oracle.com should give you more ideas. -
How Oracle query space on versions
Hey Geeks,
I'm doing a spatial query to find the intersection of polygons.
But the scenario is, for the new user there will be a new version under his name, then he creates features in bentley map and post in Oracle Server.
Then I need to make the query to find those who intersect but only entities newly created version.
SELECT c.RECORD_ID FROM VW_LYR_STES c, T_LYR_LND p WHERE c.case_id = 'ABCD019034. '
AND SDO_RELATE (c.GEOM, p.GEOM, 'mask = anyinteract') = 'TRUE '.
Any ideas on how to achieve this, queries on the particular version.
Thanks in advance,
Ken
With Workspace Manager you shouldn't really be query the table LT - you should go through the view of high - T_LYR_STES in your case. You can query the underlying table for the LT, but it's a bit nebulous art. I use Workspace Manager for years and I've never asked the LT table directly if trying to debug some weird data scenarios. In the normal course of events, you always pass by the view.
If the user has not yet merged to the workspace, then you should go to this area of work and request here. For example
execute dbms_wm.goToWorkspace('
); SELECT c.RECORD_ID FROM VW_LYR_STES c, T_LYR_LND p WHERE c.case_id = 'ABCD019034' AND SDO_RELATE(c.GEOM,p.GEOM,'mask=anyinteract') = 'TRUE'; -
Oracle query performance.
In one of my oracle procedure, I make the following query.
Select plate in amountA from Table1 where Bill_id = billId and CATEGORY = 'A ';
Select plate in amountB from Table1 where Bill_id = billId and CATEGORY = 'B ';.
Select plate in amountC from Table1 where Bill_id = billId and CATEGORY = 'C ';
I want to improve this code block. I want to make a single request and get the result.
SELECT
(Select sum(amount) into amountA from Table1 Where Bill_id=billId and CATEGORY='A') AS x1,
(Select sum(amount) into amountB from Table1 Where Bill_id=billId and CATEGORY='B') AS x2,
(Select sum(amount) into amountC from Table1 Where Bill_id=billId and CATEGORY='C') AS x3Can be a solution, but I not wish on it.
Is there a better approach?
Select sum (decode (category 'A', amount, 0))
sum (decode(category,'B',amount,0))
sum (decode(category,'C',amount,0))
in amountA
amountB
amountC
FROM table1
where bill_id = billid
and the category ('A', 'B', 'C');
-
Hello
I have an EMP table with User_Id, ENO, Org_ID and Dept_ID columns.
Now, I would like to insert values into the table EMP using under conditions.
Insert into EMP (user_seq.nextval,
(select empno from employee where empno in (...) (empnumbers),
(select org_id in organizations where nom_org = "XXXXXX"),
(sélectionnez dept_id dans DEPT où dname dans ("MANAGER", "ANALYSTE", "VENDEUR")))
Please provide to give me the query for the prescription above.
Thank you.
969952 wrote:
No, not like that... Please take a look here...
Select USERS_SEQUENCE. NEXTVAL, e.emp_id, o.org_id, d.div_id, d.div_code, d.div_dscr
e users, office_codes o, d div
where e.div_id = d.div_id
and e.org_id = o.org_id
and d.div_dscr ("management SERVICES",
"cloud Services"
"Production Support");
O/P:
{code}
NEXTVAL EMP_ID ORG_ID DIV_ID DIV_CODE DIV_DSCR
27704 00005688 1 1 CS Cloud Services
27705 00007164 1 1 CS Cloud Services
27706 00015970 1 1 CS Cloud Services
27707 00007971 1 1 CS Cloud Services
27713 00031832 1 2 MS Management Services
27714 00026775 1 2 MS Management Services
27715 00016297 1 2 MS Management Services
27716 00029158 1 2 MS Management Services
27726 99988547 1 3 PS Production support
27727 00033034 1 3 PS Production support
27728 00006303 1 3 PS Production support
{code}
2. select * groups;
O/p:
GROUP_ID GROUPNAME
18 CS
14 MS
15 PS
Group_id is the primary key columns.
Now we're getting somewhere!
'Re missing you the groups table definition.
so I'm going to "guess" (again).
CREATE TABLE groups AS select 18 group_id, 'CS' group_name from dual union all select 14 , 'MS' from dual union all select 15 , 'PS' from dual ;
We then take your query and result set:
and a little more continue to massage the data in what you want (that is to say the END result):
WITH div AS ( select 27704 nextval, '00005688' emp_id, 1 org_id, 1 div_id, 'CS' div_code, 'Cloud Services' div_dscr from dual union all select 27705 , '00007164' , 1 , 1 , 'CS' , 'Cloud Services' from dual union all select 27706 , '00015970' , 1 , 1 , 'CS' , 'Cloud Services' from dual union all select 27707 , '00007971' , 1 , 1 , 'CS' , 'Cloud Services' from dual union all select 27713 , '00031832' , 1 , 2 , 'MS' , 'Management Services' from dual union all select 27714 , '00026775' , 1 , 2 , 'MS' , 'Management Services' from dual union all select 27715 , '00016297' , 1 , 2 , 'MS' , 'Management Services' from dual union all select 27716 , '00029158' , 1 , 2 , 'MS' , 'Management Services' from dual union all select 27726 , '99988547' , 1 , 3 , 'PS' , 'Production Support' from dual union all select 27727 , '00033034' , 1 , 3 , 'PS' , 'Production Support' from dual union all select 27728 , '00006303' , 1 , 3 , 'PS' , 'Production Support' from dual ) select * from div d, groups g where d.div_code = g.group_name;
NEXTVAL EMP_ID ORG_ID DIV_ID DI DIV_DSCR GROUP_ID GR
---------- -------- ---------- ---------- -- ------------------- ---------- --
27704 00005688 1 1 CS Cloud Services 1 CS
27705 00007164 1 1 CS Cloud Services 1 CS
27706 00015970 1 1 CS Cloud Services 1 CS
27707 00007971 1 1 CS Cloud Services 1 CS
27713 00031832 1 2 MS 2 MS management services
27714 00026775 1 2 MS 2 MS management services
27715 00016297 1 2 MS 2 MS management services
27716 00029158 1 2 MS 2 MS management services
27726 99988547 1 3 PS Production Support 3 PS
27727 00033034 1 3 PS Production Support 3 PS
27728 00006303 1 3 PS Production Support 3 PS
11 selected lines.
Now, we just need to push in the table - I prefer MERGING at this point... I find the easiest to use syntax.
Select * from groups;
GROUP_ID GR
---------- --
18 CS
14 MS
15 PS
MERGE INTO groups old USING ( WITH div AS ( select 27704 nextval, '00005688' emp_id, 1 org_id, 1 div_id, 'CS' div_code, 'Cloud Services' div_dscr from dual union all select 27705 , '00007164' , 1 , 1 , 'CS' , 'Cloud Services' from dual union all select 27706 , '00015970' , 1 , 1 , 'CS' , 'Cloud Services' from dual union all select 27707 , '00007971' , 1 , 1 , 'CS' , 'Cloud Services' from dual union all select 27713 , '00031832' , 1 , 2 , 'MS' , 'Management Services' from dual union all select 27714 , '00026775' , 1 , 2 , 'MS' , 'Management Services' from dual union all select 27715 , '00016297' , 1 , 2 , 'MS' , 'Management Services' from dual union all select 27716 , '00029158' , 1 , 2 , 'MS' , 'Management Services' from dual union all select 27726 , '99988547' , 1 , 3 , 'PS' , 'Production Support' from dual union all select 27727 , '00033034' , 1 , 3 , 'PS' , 'Production Support' from dual union all select 27728 , '00006303' , 1 , 3 , 'PS' , 'Production Support' from dual ) select distinct d.div_id, g.group_id, g.group_name, g.rowid growid from div d, groups g where d.div_code = g.group_name ) new ON ( old.rowid = growid ) WHEN MATCHED THEN UPDATE SET old.group_id = new.div_id;
3 lines merged.
GROUP_ID GR
---------- --
1 CS
2 MS
3 PS
It when you give us something to work with, we can generate results
-
Hierarchical Oracle query help needed - path between the crux of two brothers and sisters
I want to find the path between two nodes of oracle hierarchical Table.
Consider the following case-
NodeId - ParentId
=============
1 > > > > > > 0
2 > > > > > > 1
3 > > > > > > 2
4 > > > > > > 3
5 > > > > > > 0
6 > > > > > > 5
Here I want to query the database table that if there is a path between nodes 3 and 5?
The previous query you provided work upwards to the root node.
Here is my expected result, 3-> 2-> 1-> 0-> 5
Yet once if I have a query in the table to get the path between 1 and 3, I want to get out of the way - next
1-> 2-> 3
Therefore, the query works in both cases. Where ADI root can act as an intermediate or no node.
Can you please guide me how I can get it?
Thank you.Hello
user13276471 wrote:
I want to find the path between two nodes of oracle hierarchical Table.Consider the following case-
NodeId - ParentId
=============
1 >>>>>> 0
2 >>>>>> 1
3 >>>>>> 2
4 >>>>>> 3
5 >>>>>> 0
6 >>>>>> 5
Here I want to query the database table that if there is a path between nodes 3 and 5?
The previous queryWhat application is this? If you're referering to another thread, then post a link, such as {message identifier: = 10769125}
you provided work upwards to the root node.
Here is my expected result, 3--> 2--> 1--> 0--> 5
Yet once if I have a query in the table to get the path between 1 and 3, I want to get out of the way - next
1--> 2--> 3Therefore, the query works in both cases. Where ADI root can act as an intermediate or no node.
Can you please guide me how I can get it?
I think you want something like this:
WITH bottom_up_from_src AS ( SELECT nodeid , parentid FROM table_x START WITH nodeid = :src_nodeid CONNECT BY nodeid = PRIOR parentid ) , bottom_up_from_dst AS ( SELECT * FROM bottom_up_from_src UNION ALL SELECT parentid AS nodeid , nodeid AS parentid FROM table_x WHERE nodeid NOT IN ( SELECT nodeid FROM bottom_up_from_src ) START WITH nodeid = :dst_nodeid CONNECT BY nodeid = PRIOR parentid ) SELECT :src_nodeid || SYS_CONNECT_BY_PATH (parentid, '-->') AS display_path FROM bottom_up_from_dst WHERE parentid = :dst_nodeid START WITH nodeid = :src_nodeid CONNECT BY nodeid = PRIOR parentid ;
This will show how you can get it from: src_nodeid at dst_nodeid, moving to the top or to the bottom of a hierarchy at a time step. This will work regardless of the fact that
- : src_nodeid is the ancestor of the: dst_nodeid, or
- : src_nodeid is a descendant of: dst_nodeid, or
- both: src_nodeid and: dst_nodeid are the descendants of another node (e.g. 0).
- : src_nodeid is the ancestor of the: dst_nodeid, or
I hope that answers your question.
If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.
Explain, using specific examples, how you get these results from these data.
Always say what version of Oracle you are using (for example, 11.2.0.2.0). It is always important, but particularly so with CONNECT BY queries, because each version since Oracle 7 had significant improvements in this area.
See the FAQ forum {message identifier: = 9360002}
Regarding the oracle character set change of EE8MSWIN1250 to AL32UTF8
HelloToday I changed EE8MSWIN1250 in AL32UTF8 characters in oracle 10.2.0.1, who does not, here is the summary of the analysis please give me best suggestion how I can go a head with it.
Database scan summary report
Started on time: 2012-01-12 20:50:20
Elapsed time: 2012-01-12 21:20:54
Time to end started process ID
---------- -------------------- --------------------
1 2012-01-12 20:54:39 2012-01-12 21:19:57
2 2012-01-12 20:54:39 2012-01-12 21:20:20
3 2012-01-12 20:54:39 2012-01-12 21:20:37
4 2012-01-12 20:54:39 2012-01-12 21:19:57
5 2012-01-12 20:54:41 2012-01-12 21:19:56
6 2012-01-12 20:54:39 2012-01-12 21:20:43
7 2012-01-12 20:54:40 2012-01-12 21:19:56
8 2012-01-12 20:54:40 2012-01-12 21:19:57
9 2012-01-12 20:54:41 2012-01-12 21:19:57
10 2012-01-12 20:54:42 2012-01-12 21:19:56
11 2012-01-12 20:54:41 2012-01-12 21:20:39
12 2012-01-12 20:54:42 2012-01-12 21:19:57
2012-01-13 12 20:54:41 2012-01-12 21:19:56
14 2012-01-12 20:54:42 2012-01-12 21:19:57
15 2012-01-12 20:54:40 2012-01-12 21:19:57
16 2012-01-12 20:54:42 2012-01-12 21:19:56
17 2012-01-12 20:54:40 2012-01-12 21:19:56
18 2012-01-12 20:54:43 2012-01-12 21:19:56
19 2012-01-12 20:54:40 2012-01-12 21:20:49
2012-01-20 12 20:54:42 2012-01-12 21:20:52
21 2012-01-12 20:54:40 2012-01-12 21:20:21
22 2012-01-12 20:54:42 2012-01-12 21:19:57
23 2012-01-12 20:54:40 2012-01-12 21:19:56
24 2012-01-12 20:54:43 2012-01-12 21:19:56
25 2012-01-12 20:54:41 2012-01-12 21:19:56
26 the 2012-01-12 20:54:43 2012-01-12 21:19:57
27 2012-01-12 20:54:41 2012-01-12 21:19:56
28 2012-01-12 20:54:43 2012-01-12 21:19:57
29 2012-01-12 20:54:42 2012-01-12 21:19:56
30 2012-01-12 20:54:43 2012-01-12 21:19:57
31 2012-01-12 20:54:43 2012-01-12 21:19:57
32 the 2012-01-12 20:54:43 2012-01-12 21:19:57
---------- -------------------- --------------------
[Size of the database]
Tablespace used free total Expansion
------------------------- --------------- --------------- --------------- ---------------
SYSTEM OF 693, M 50, 26, M 50, 720, 00M 1, 06M
UNDOTBS1 59, 50M 1 150, 50M 1 210, 00M, 00K
SYSAUX 438, 19M 11, 81M 450, 00M 8 M 62
TEMP, 00K, 00K, 00K, K 00
3 USERS, 13M 1, 00M, 88M 5, 00K
EXAMPLE OF 77, 38M 22, M 63, 100, 00M 108, 00K
PDESRV 2 771, 25 M 228, 75 M 3 000, 00 M 758, 03 M
PDEVEGY 1 394, 06 M 105, 94 M 1 500, 00 M 3, 73 M
PDEREN 1 270, M 63, 229, 38 M 1 500, 00 M 3, 89 M
------------------------- --------------- --------------- --------------- ---------------
Total 6 707, 63 M 1 777, 38 M 8 485, 00 M 775, 42 M
Most CLOB size is 3982807 bytes
[Database scanning settings]
Value of the parameter
------------------------------ ------------------------------------------------
CSSCAN Version v2.1
Instance name pdent
Database Version 10.2.0.1.0
Comprehensive analysis of database type
Analyze the data TANK? YES
Character set of database EE8MSWIN1250
FROMCHAR EE8MSWIN1250
TOCHAR AL32UTF8
Analyze the NCHAR data? NO.
Size of buffer extraction table 1024000
Number of process 32
Convertible data capture? NO.
------------------------------ ------------------------------------------------
[Scanning summary]
Some character in the data dictionary data are not convertible to the new character set
Some type of character application data are not convertible to the new character set
[Summary of the Data Conversion dictionary]
Immutable data type Convertible truncation with loss
--------------------- ---------------- ---------------- ---------------- ----------------
VARCHAR2 5 888 961 19 608 0 0
CHAR 1 097 0 0 0
LONG 311 066 579 0 0
25 204 1 901 0 1 CLOB
VARRAY 22 366 0 0 0
--------------------- ---------------- ---------------- ---------------- ----------------
6 248 694 22 088 0 1-total
Total in % 99 648 0,352% 0.000 0.000%
The data dictionary cannot be migrated safely using the CSALTER script
[Application summary of data Conversion]
Immutable data type Convertible truncation with loss
--------------------- ---------------- ---------------- ---------------- ----------------
8 246 189 1 248 156 800 VARCHAR2 0
CHAR 1 024 547 0 0 0
LONG 18 639 30 0 0
CLOB 615 152 7 410 0 0
VARRAY 2 019 0 0 0
--------------------- ---------------- ---------------- ---------------- ----------------
Total 9 906 546 1 255 596 800 0
Total 88 745 11 248 0.007 0.000% percentage
[Cabriolet, truncated and distribution data with loss of Table]
I stuck half as the summary is too long, I'm very new please help out me.
Thanks and greetings
Flo
-------
It seems that Data Dictionary has some convertible entries. you need to fix this all the objects individually as suggested in metalink Note 258904.1
Application object has a truncation and entered convertible. For truncation entries, you must increase the size of the column of the completed columns as shown in the .err log file. For convertible entries, you must perform the export/import. Note 1283764.1
some doubts in the conversion of oracle query
I have to convert the following query in ms access to oracle.INSERT INTO the Bill (Reffacture, InvoiceDesc)
Select a_Invoices! [Ref provider] & "-" & Trim (a_Invoices! [invoice No.]) & "Q" & DatePart ("q", [invDate]) & "-" & DatePart("yyyy",[invDate]) & "SB" as Reffacture.
Trim (a_Invoice_Desc! [Invoice line Description]) AS a Expr4
Of a_Invoices a_Invoice_Desc INNER JOIN
WE (a_Invoices. [Ref provider] is a_Invoice_Desc. [Ref provider])
AND (a_Invoices. [Invoice No.] is a_Invoice_Desc. [Invoice No.)]
WHERE (((a_Invoices. [<>ACK GL account]) »--- »)) ;
for the quarter, I tried with select to_char (to_date ("PRVBTOT", "dd/mm/yy '"), 'Q') as quarterdate of "a_Invoices" - it worked, but how to combine all the
Hello
882431 wrote:
Thanks for the input... I have another doubt based on the dateI have a date stored in a field of type varchar, n'm copy in the date field
For example: ' 18/4/2011 0:0:0.0' varchar field is, I tried with "' 2011/4/18 as yyyy/mm/dd ', I can add hh: mm: for the moment (I wasn't looking this), but there is one.0, can someone please tell me how shud convert it..." Sorry if asking a basic question, I already searched but to no avail.
DATEs do not include fractions of a second. If you don't mind losing fractions of a second, you can simply remove them before pass the string to TO_DATE, like this
TO_DATE ( REGEXP_REPLACE ( varchar2_column
, '\.[0-9]*$'
)
, 'YYYY/MM/DD HH24:MI:SS'
)
REGEXP_REPLACE will remove the decimal point and any numbers after him. If the string does not contain a decimial, it is correct: REGEXP_REPLACE returns the immutable string in this case.
If the fraction of a second is important, use a TIMESTAMP instead of a DATE column (and use the TO_TIMESTAMP instead of TO_DATE function).
simple oracle query does not not in cf9
When running in oracle 10 g, this query returns correctly a line:
WITH myResults AS
(
SELECT 1 AS MonNiveau, "someString" AS myData
OF the double
)
SELECT *.
OF myResults;
Returns:
MONNIVEAU | MYDATA |
1 | someString |
When put inside a cfquery in a cf9 page, returns nothing.
< cfset qryRan = "false" >
< isDefined ('myQry.recordCount') cfif >
< cfset qryRan = "true" >
< / cfif >
Qry: < cfoutput > #qryRan # < / cfoutput >
Returns:
Qry: false
Yes, the query always had the name the value attribute
It was certainly the oracle driver, I install v10.1 in parallel with 8.1, recreated my datasources and everything works fine now
Thanks for the reply
Maybe you are looking for
-
Replacing the battery on Portege Z830 - 10H
I have a Portege z830 - 10: 00 for a few months. It's battery has already lost 15% of capacity, and I think it is inevitable that the battery will be neet to replace sooner or later. You know, if I am able to replace the battery myself (as in the lar
-
041wn for laptop HP 15: disabled code
I forgot the password to powered and keep getting a disabled system code 84888896 Help!
-
Enter the power on password administrator password - don't know system off code 60474922 Need code of the entry. Thank you
-
Transfer of iPhone 4s to Z5 Compact bookmarks
Using Bridge Sony for Mac I've uploaded most of my content, but not of bookmarks or Notes. Can anyone help with this please? Peter
-
View and edit all keyframes in nested compositions
I'm looking for a way to view and edit all the keyframes in nested compositions. I want to do because it will allow me to edit all events taking place at the same time, and it's a little embarrassing open each composition to edit keyframes. Is it pos