Oracle to Windows Server 2008 R2-based system IA64 Itanium

Similar Questions

• Creation of domain to 0% - Oracle 11g - Windows Server 2008 64 bit PFRD

  1.i want to install and configure Oracle FMW version 11.1.1.2.0 in Windows server 2008 64 bit.
  
  2.i have followed the steps too as described here in these links two forum:
  1.http://CN.forums.Oracle.com/forums/thread.jspa?threadID=2245015
  2.creation area at 0% - Oracle PFRD 11 g - Windows Server 2008 64-bit
  
  3.I give my installtion No...
  
  I installed the JDK: 1.7.0.
  I have correctly installed web logic version wls1035_generic.jar.
  I also installed the version 11.1.1.2.0 FMW using all four disks (installation and donot set up).
  I also installed the fix 11.1.1.3.0 version.
  But when I am trying to run config.bat then it stops in the field of the creation to 0%, nothing happens, process sleeps:
  He created the field of size 9,23 mb and it displays "DOMAIN CREATION FAILS" after a long period of approximately 900 min.
  
  
  I also checked the path... It contains no special characters.
  
  
  
  Any ideas?

  You did not follow the instructions in the other links. Not at all. If you did, you would know:

  First of all, you need to use JDK 1.6
  Second of all, you have to match to the FMW WLS version you want to use (you should use 11.1.1.4, is told by the way).

  You should:

  (1) install JDK 1.6
  (2) installation of WebLogic 10.3.4 (or, if you want to use FMW 11.1.1.3, install WLS 10.3.3)
  (3) install FMW 11.1.1.2
  (4) install 11.1.1.4 patch (or 11.1.1.3)
  (5) proceed with your configuration.

  John

• Oracle on Windows Server 2008 64 bit R2 client

  Hello, we are using Oracle 11 G R2 database engine has. For the demand side, we expect to run the application on Windows Server 2008 R2 64-bit, we watched to get the app to Oracle client on this platform and look there is no client available yet.
  Anyone know when a customer Oracle will be available on this platform?

  Unless you are in the official beta program (and I don't think they are registered new beta sites to this date), there is a public release until the publication of the production assuming that Oracle continues their common practice.

  You will get errors during installation, but you should be able to tell the installer to ignore them. You can also run the Setup program with the indicator - ignoreSysPrereqs in order to bypass the prerequisite check during the installation.

  Obviously, it's a bit out of my pay grade, but I'd be nervous about having a release date scheduled for your product until the 11 g R2 client is potentially available. It was me, I would make sure that I had a backup plan to be able to deliver the first version of the application on an earlier version of Windows which is certified with the 11g R1 client.

  Justin

• SP1_ Windows Server 2008 R2 operating system error

  Server rebooted automatically and we get the error

  Failure of the operating system (control bug of Windows, STOP: 0x000000C2 (0x000000000000109B, 0x000000000000000C, 0 x 0000000000000007, 0xFFFFFA8040DCCCA0))

  

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Client installation fails on Windows Server 2008

  Hello
  
  I'm trying to install client Oracle on Windows Server 2008, I downloaded the correct version of the client, but cannot go beyond the verification of prerequisites.
  
  I have loaded down the following file on the Oracle site, which corresponds to the version of our database
  
  11107_w2k8_x64_production_client.zip
  
  I get the following error
  
  Full version. The result of this review is: failure of < < < <
  Problem: Oracle Database 11 g is not certified on the current operating system.
  Recommendation: Make sure that you install the software on the correct platform.
  
  Anyone know why I get this?
  
  Thank you...

  GR 11, 1 client material only is not supported on Win 2008 R2 - pl use client software of 11 GR 2

  See these Docs MOS

  1199616.1 - 11.1.0.7 client cannot be installed on Windows 2008 R2 or Windows 7
  867040.1 - management representation statement: Oracle Database 11g Release 2 - Microsoft Windows 7 and Windows Server 2008 R2

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e16774/TOC.htm

  HTH
  Srini

• LAN driver for Satellite L505 - 10Z PSLS3E on Windows Server 2008

  Hello world

  We hope to find a solution for my case.

  I have Toshiba Notebook (PSLS3E-L505-10Z) and installed Windows server 2008 on it, but I can't find the driver Lan for this OS. Could guide you please solve me this problem, because I lost a lot of time to research on the toshiba Web site and with no valid result realtek Web site.

  Thank you

  Hello

  Windows Server 2008 is based on a Vista/Win 7 OS.
  It s like the same situation 5 years ago. Win 2003 server was based on Win XP and all the drivers Win XP are compatible with Win 2003 server.

  If you are using Windows Server 2008, then you should try the Vista/Win 7 drivers!

  Good bye

• Not available on Windows server 2008 r2 64 error ORA-01034 DBCA Oracle

  Hi all
  
  I installed oracle 11.2.0.1 on my system operating system Windows server 2008. Then after that through DBCA I created the database while I had oracle ORA-01034 is not available. If any body knows how to solve it please answer me.
  
  Thank you and best regards,
  Arya

  Hi Arya,

  SID and ORACLE_HOME value correctly.

  --
  Bala :)

• Oracle 10g to install on Windows server 2008 R2 (6.1)

  Hi all
  
  I am trying to install Oracle 10 g on windows Server2008 R2 (6.1), but it gives an error that OS is not supported. I tried to install below version.
  
  Oracle Database 10g Release 2 (10.2.0.4.0)
  Enterprise/Standard Edition for Microsoft Windows Vista x 64, Windows Server 2008 x 64,
  Microsoft Windows Server 2008 R2 x 64, Windows 7 x 64
  
  But it fails with the error that OS version 6.1 is not supported. On the download page, does it say for 10.2.0.5 patch of My Oracle support for windows server 2008 R2, I patch p8202632_10205_MSWIN - x 86-64 but it requires an oracle pre-installed home.
  
  So, how can I install Oracle 10 g 10.2.0.4 don't settle and the patch requires a previous installation?
  
  The reason why I want to install Oracle 10 g is our Java application is running in production on JDK 1.4 and Oracle 11 g provides not for JDK 1.4 JDBC driver, there is a JDBC driver for Oracle 11 g that can work with JDK 1.4?
  
  Thanks in advance for the help.
  
  Best regards!
  
  Irfan

  simpler is to use IgnoreSysPrereqs - key to avoud system check.
  more complex - locate the file oraparam.ini under your dstributive db installation directory and edit the string

  Windows = 5.0, 5.1, 5.2, 6.06.1

• ORACLE_HOME in Oracle RAC 11g (Windows Server 2008)

  Hello
  
  I've got 2 two nodes in a RAC Oracle 11 g in Windows Server 2008. Oracle software is installed in directory.
  
  I realized that it has not been set ORACLE_HOME path. In the properties-> advanced-> Environment Variables, I see that ORACLE_HOME is empty.
  
  -Which way would be the ORACLE_HOME: C:\app\bd\product\11.2.0\dbhome_1
  -You have set up the same in the two nodes?
  
  Thank you

  I realized that it has not been set ORACLE_HOME path. In system-> Advanced-> Environment Variables properties, I see that ORACLE_HOME is empty.

  its normal behavior

  -Which way would be the ORACLE_HOME: C:\app\bd\product\11.2.0\dbhome_1

  If you have installed this location, Yes

  -You have set up the same in the two nodes?

  in fact, you don't have HAVE to, its not need at all

• Oracle 10 express edition on windows server 2008

  I installed oracle 10 (10.2.1015) on Windows server 2008
  but unable to log on
  
  getting error as
  
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  
  also the default browser not opening
  Please help me

  Salvation;

  I'm not sure 10 XE certified with win server 2008

  Please see:

  http://download.Oracle.com/docs/CD/B25329_01/doc/install.102/b25143/TOC.htm#CIHFEBGE
  Operating system one of the following 32-bit Windows operating systems:

  Windows 2000 Service Pack 4 or later

  Windows Server 2003

  Windows XP Professional Service Pack 1 or later

  "" I suggest, I suggest you close your thread here any change of State of thread to answered and move it to * Forum Home "database" Oracle Database 10 g Express Edition *.

  Respect of
  HELIOS

• probolem on install 10gr 2 on windows server 2008 based on itanuim

  I want to install 10 g 2 on windows server 2008 based on itanuim, but meet problem on jdk and Yes
  
  to: Windows server 2008-based the itanuim (or 2003 focused on the itanuim, same question as 2008)
  database: oracle 10.2.0.1 windows itanuim
  
  1 when run setup.exe
  
  In the dos window:
  From Oracle Universal Installer...
  
  No prerequisite doesn't check found in oraparam.ini, no prerequisite checks wi
  he be executed.
  Preparations for the launch of Oracle Universal Installer from C:\user\OraInstall2009-08-11-21043pm. Please wait...
  
  There is a wait of 10 seconds, and then the window close?
  
  2 I am looking metalink find it is a bug on the version of the jdk installation required patch 5391050
  so I download the patch from metalink, but, when I run setup.exe, on the screen, a display of question
  
  'The unknown errors, pls provide follow-up to oracle technology messages '.
  
  unkown
  unkown
  unknown '.
  
  
  then press enter return windows interface
  
  
  should I install jre before installing oracle?
  
  What can I do?

  There is a lot of confusion as a result of your messages.

  If you want Oracle 10.2.0.1 for Windows 2003 server running on the Itanium architecture, here is the link.

  http://www.Oracle.com/technology/software/products/database/Oracle10g/htdocs/10201winsoft64.html

  If you want Oracle 10.2.0.1 for Windows 2008 server running on Itanium architecture *, it is not available from now *.

  Patchsets, upgrade to 10.2.0.3.0 or 10.2.0.4.0, are available on http://metalink.oracle.com

  Hope says.

  If you are facing problems installing 10.2.0.1 on Windows 2003 server on architecture, Itanium, please post the error messages.

• How should I / can I install Windows 8 policies on a Windows Server 2008 system.

  Hello

  I am currently working on a customer's server that is running Windows Server 2008 R2. They are trying to upgrade their machines to Windows 8.

  The problem they have is that they don't want all the extra tiles on metro screen, so I exported a model of how they want it to look. The problem I have at the minute is to install Group Policy settings 8 windows on their server, so that I can put the filter pattern of departure for all machines in the domain.

  How to properly install Windows 8 strategies on the system? I downloaded them as files admx on the MS site ready to go, but it is not as simple as I thought.

  Thanks in advance,

  Kaelan. IARC - Smith

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• FoxPro9 is compatible with Windows Server 2008 R2 as operating system?

  FoxPro9 is compatible with Windows Server 2008 R2 as operating system?

  Try the FoxPro Forum

  http://social.msdn.Microsoft.com/forums/en-us/home?Forum=visualfoxprogeneral

  Don

• Windows server 2008 standerd edition I m shows no icon of system after virus infection can u help me for this

  Windows server 2008 standerd edition I m shows no icon of system after virus infection can u help me for this

  Colinet

  Hi DilipkumarShah Comeau,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Forum TechNet (Windows Server)

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• I am trying to install Windows Server 2008. When I get to the part where I should choose where the operating system is to be installed, it is blank.

  I am trying to install Windows Server 2008. When I get to the part where I should choose where the operating system is to be installed, it is blank. He told me 'No device found drivers. We see the SATA HDD in BIOS, and if I browse for the drivers, the driver is displayed. I used the command line packaged with the installer to format the drive, just to be sure. It is formatted in NTFS.

  original title: can not select the HARD drive to install on

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads