Oracle Virtual Directory - store Local adapter creation

Similar Questions

• Oracle Virtual Directory for SSL configuration

  Hello experts, can you please help me understand whether a typing error in Oracle Enterprise Deployment guide for IDM http://docs.oracle.com/cd/E25054_01/fusionapps.1111/e21032/toc.htm#BEGIN, port of the OID is mentioned in Oracle Virtual Directory for SSL configuration - section 9.4.2.2. Why port ODI?
  
  The guide mentioned how to configure OID for SSL in section 7.4.3.2 and here he mentioned port 389 OID! For example, during Setup for OVD, is not that we are supposed to talk about port OVD. Please help me clarify this confusion. BTW, in many places, the guide says clearly, if you have OVD, you mention port OVD here...
  
  Thank you
  Jyothi

  Specify the port OVD. I think that by default it's 6502.

  Kind regards
  GP

• Oracle Virtual Directory 10.1.4.3

  Hello
  
  What all the backend directory servers and database servers are certified to work with Oracle Virtual Directory on linux redhat AS4 10.1.4.3?
  
  I tried to look for more information on this, but could not do. What I've found is the following: http://www.oracle.com/technology/software/products/ias/files/idm_certification_101401.html#BABCABFC
  
  He talks abt 10.1.4.0.x, but there is no mention of 10.1.4.3
  
  Pointers would be welcome.
  
  Thank you.

  Hi Daniel,.

  MetaLink (notes 778969.1) points to the same document for 10.1.4.3 certification as well.

  -Vinod

• Oracle Internet Directory Config error Linux x 64 java.lang.NoClassDefFoundE

  Hello
  
  I'm configuration (v11.1.1.2) identity management product, the installation was very well made. I started to configure it using the config.sh script. I chose to create a new weblogic domain and selected to configure OID and OVD.
  
  I am running Red hat linux 5.4 x 64 bit OS.
  
  I gave all the parameters configuration, such as requested and if failure at the stage where it creates the Oracle Internet Directory store with the error in the log below:
  [2011-02 - 02T 18: 20:29.969 + 00:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM EVENT CONFIG] onConfigurationStatus-> ab274dda-a540-4666-bc1b-9d367b26b3b9 StatusMsg: {0} creation ASComponent.
  [2011-02 - 02T 18: 20:29.969 + 00:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] reportStartConfigAction: EXIT...
  [2011-02 - 02T 18: 20:29.969 + 00:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] beginning to create the component
  [2011-02 - 02T 18: 20:30.057 + 00:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] Action for the oid1 is to CREATE
  [2011-02 - 02T 18: 20:30.057 + 00:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] trying to create the oid1 component
  [2011-02 - 02T 18: 20:30.447 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] OID onCreate... [[
  
  ]]
  [2011-02 - 02T 18: 20:30.466 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] not a DB CARS: 10.23.74.119:1521:RMG
  [2011-02 - 02T 18: 20:30.467 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] DB connection string: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.23.74.119) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = RMG)))
  [2011-02 - 02T 18: 20:30.885 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] SCHEMA_VERSION_REGISTRY Control Panel...
  [2011-02 - 02T 18: 20:30.894 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] Version of the schema OID: 11.1.1.3.0
  [2011-02 - 02T 18: 20:30.911 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] Num of OIDs: 1
  [2011-02 - 02T 18: 20:31.029 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] TO validate input parameters
  [2011-02 - 02T 18: 20:31.097 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] Ports: nonssl = 3060 ssl = 3131
  [2011-02 - 02T 18: 20:31.097 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] directory specific OID creating
  [2011-02 - 02T 18: 20:31.098 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] JPS Files already exist: oracle.as.config.ProvisionException: Dest file (/ opt/oracle/middleware/asinst_1/config/JPS/jps-config-jse.xml) already exists.
  [2011-02 - 02T 18: 20:31.098 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] files already exist: oracle.as.config.ProvisionException: Dest file (/ opt/oracle/middleware/asinst_1/config/JPS/system-jazn-data.xml) already exists.
  [2011-02 - 02T 18: 20:31.674 + 00:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] []
  java.lang.NoClassDefFoundError: oracle/security/xmlsec/util/Base64
  to oracle.security.jps.internal.common.util.JpsCommonUtil. < clinit > (JpsCommonUtil.java:212)
  at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:155)
  at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:166)
  to oracle.iam.management.oid.install.wls.OIDComponentHelper$ 1.run(OIDComponentHelper.java:396)
  at java.security.AccessController.doPrivileged (Native Method)
  at oracle.iam.management.oid.install.wls.OIDComponentHelper.setCredInCSF(OIDComponentHelper.java:389)
  at oracle.iam.management.oid.install.wls.OIDComponentHelper.setPasswdsInCSF(OIDComponentHelper.java:361)
  at oracle.iam.management.oid.install.wls.OIDComponent.onCreate(OIDComponent.java:177)
  at oracle.as.config.impl.OracleASComponentBaseImpl.createComponent(OracleASComponentBaseImpl.java:596)
  at oracle.as.config.impl.OracleASComponentBaseImpl.create(OracleASComponentBaseImpl.java:105)
  at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:144)
  at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
  at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
  at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
  at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
  at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
  at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
  at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
  at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:861)
  at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
  at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
  at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
  at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
  at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
  at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: java.lang.ClassNotFoundException: oracle.security.xmlsec.util.Base64
  at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionClassLoader.loadClass(StandardConfigActionClassLoader.java:75)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
  at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
  
  Help, please.
  
  If necessary, I can post the full log... but his very large... So just post newspapers around the error message...
  
  Published by: 833360 on February 2, 2011 10:59

  Hello

  Few things to check.

  What is the JDK/JRE Version.
  What is the version of WLS?
  From the error lines, I can see THAT RCU Version is 11.1.1.3.

  If the WLS version is 10.3.3, so it is not supported with IDM 11.1.1.2.

  Suggestions: update IDM to 11.1.1.3 and configure it. Here are the steps.

  -Cancel the Configuration Wizard, delete the directories of domain Instance ACE and WebLogic OR if it's on the virtual machine, you can return to the previous snapshot.
  -Update IDM in 11.1.1.3
  -Execute config.cmd or confg.sh

  Let me know the result.

  Thank you
  GK

• virtual directory mapping

  I posted this here and not yet in the forum of weblogic.
  
  Use the current version of jdeveloper, adf.
  
  I read the posts on the forum of weblogic and followed the solution, but I get a 404 not found error.
  
  I want to deploy all the PDFs in the directory c:/Pdf.
  
  I use golink with destination http://localhost:7001 / bissell.pdf
  
  If I deploy in default location of the document, it works well.
  
  When I deploy in c:/Pdf I get a 404 error.
  
  The reason why I posted this here is, I don't know if ADF creates problems, I do not think that Yes, but...
  
  If there is no step that I missed, please let me know.
  
  
  Chuck
  
  
  WebLogic.Xml
  
  <? XML version = "1.0" encoding = "windows-1252"? >
  -weblogic-web-app xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://www.bea.com/ns/weblogic/weblogic-web-app http://www.bea.com/ns/weblogic/weblogic-web-app/1.0/weblogic-web-app.xsd" xmlns = "http://www.bea.com/ns/weblogic/weblogic-web-app" >
  -security-role-assignment >
  valid users - < role name > < / role name >
  users of < SPN > < / main-name >
  < / security role assignment >
  -< virtual directory mapping >
  < local path - > c:/Pdf < / local path >
  *.PDF < url-pattern > < / url-pattern >
  < / Directory virtual-mapping >
  UMASS < context root > < / root context >
  -Library-ref >
  < name of the library - > adf.oracle.domain.webapp < / library name >
  < / library-ref >
  -Library-ref >
  < name of the library - > jstl < / library name >
  specification of the < version > 1.2 < / specification-version >
  < / library-ref >
  -Library-ref >
  JSF < library name > - < / library name >
  specification of the < version > 1.2 < / specification-version >
  < / library-ref >
  < / weblogic-web-app >

  The virtual directory that you associate is a part of the Web application, if you need to access it in the root of the Web application. If the root of the application context is UMSASS (as your weblogic.xml States), try the following:

  http://localhost:7001/UMass/bisell.PDF

  Dimitar

• With the help of deployment plan to change the virtual directory mapping

  Hi all
  Have anyone tried this before?
  I have a deployment plan to add the virtual directory to my descriptors of weblogic as follows:
  
  Inside tag <>variable-definitions:

   <variable> 
        <name>LocalPath</name>
        <value>C:/</value>
      </variable> 
      <variable>
        <name>VirtualPath</name>
        <value>/Temp/*</value>
      </variable> 

  Then, to add the virtual directory to weblogic.xml in:

  <module-descriptor external="false">
        <root-element>weblogic-web-app</root-element>
        <uri>WEB-INF/weblogic.xml</uri>
        <variable-assignment>
           <name>LocalPath</name>
           <xpath>/weblogic-web-app/virtual-directory-mapping/local-path</xpath>
        </variable-assignment>
        <variable-assignment>
           <name>VirtualPath</name>
           <xpath>/weblogic-web-app/virtual-directory-mapping/url-pattern</xpath> 
           <operation>add</operation>
        </variable-assignment> 
      </module-descriptor>

  But I have this error:
  "

  C:\Users\Napoleon\AppData\Roaming\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\upload\ReviewApp\app\planplan.xml:0 error VALIDATION PROBLEMS FOUND: problem: cvc-complex - type. 2.4 c: expected element" url-pattern @http://xmlns.oracle.com/weblogic/weblogic-web-app' before the end of the virtual-directory-mapping element content @http://xmlns.oracle.com/weblogic/weblogic-web-app:< C:\Users\Napoleon\AppData\Roaming\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\upload\ReviewApp\app\planplan.xml >

  I also tried to use the XPath for model url as follows:
  /WebLogic-Web-app/virtual-directory-mapping/[local-path="C:/"]/URL-pattern < xpath > < / xpath >
  
  But I have the same error. The <>url-patter item is not added correctly to the virtual directory mapping tag.
  
  It is supposed to work. Someone has done this before? or is this a bug of the deployment plan.
  
  Thank you very much.
  
  Concerning
  
  K.

  Hello

  It seems that in the new WLS10.3.2 weblogic.xml XSD order of * "url-pattern" * and * 'local-path' * is changed then the secuence of Xpath is changed... This means that now you must try with following... What has worked for me in WLS10.3.2:

  
  
  MyVirtualDirEAR
  
  
  LocalPath
  C:\DELETE\MyImages
  
  
  VirtualPath
  / Temp / *.
  
  

  
  VirtualDirWebApp.war
  war
  
  WebLogic-web-app
  WEB-INF/weblogic.xml
  
  WeblogicWebApp_WorkManagers_12789279799714
  WebLogic-Web-App/Work-Manager
  
  
  firstNode
  WebLogic-Web-App/Virtual-Directory-Mapping
  Add
  
  
  
  
  
  VirtualPath
  /WebLogic-Web-app/virtual-directory-mapping/URL-pattern
  Add
  
  
  LocalPath
  /WebLogic-Web-app/virtual-directory-mapping/[URL-pattern="/temp/*"]/local-path
  Add
  
  
  
  
  
  
  C:\VirtualDirectory_MappingApp
  

• virtual directory mapping does not

  G ' Day,.

  Running the installation zip (development version) WL12.1.3 on my windows 7 dev laptop and trying to get the virtual directory mapping directive work in weblogic.xml.

  I have the following defined in weblogic.xml:

  <virtual-directory-mapping>
          <local-path>C:/htdocs/gocnrsdpgdc/static</local-path>
          <url-pattern>/static/*</url-pattern>
      </virtual-directory-mapping>
  

  My context root is on: / inet-inet/gocnr-sdpgdc/10

  Trying to pull in static files using the following URL in my application results in a not found error:

  /INET-INET/gocnr-sdpgdc/10/static/content/HTML/test.html

  Any ideas? Security restrictions preventing access to the file outside of the app container system perhaps WL?

  Hello

  I just quickly tested on WebLogic Mac 12.1.3 and it seems to work perfectly well. I used the demo attached here:

  Article:

  Mapping of virtual directory in WebApps

  http://middlewaremagic.com/WebLogic/?p=790

  Source code:

  https://github.com/jaysensharma/MiddlewareMagicDemos/tree/master/WebLogic/General/WLS12c_Virtual_Directory_Demo

  I suspect you should use the slash reverse rather oblique inside of the

  2. C:\htdocs\gocnrsdpgdc\static   
  3. static / / *.

  Can you please try with the above to see if it works.

  NOTE: there are two 'static' in your PATH with the setting above are your JSP taking care of this?

  If not then I guess you should use the as follows: (without 'static') else WebLogic will search in the "C:/gocnrsdpgdc/htdocs/static/static/content/html/test.html '

  C:\htdocs\gocnrsdpgdc

  If you do not want to change the as above, then try using the URL as http://localhost:7001/inet-inet/gocnr-sdpgdc/10/content/html/test.html ("static" is removed from the URL as it is already included in the)

  Concerning

  Jay SenSharma

• What is the best way to backup of virtual machines on a standalone ESX with the data store local

  Hello

  I want to save the virtual machines on a host ESX autonomous. and all of these virtual machines is the local data store.  What is the best way to save these virtual machines in this situation?

  And probably we don't provision VTL on the local data center, so it is possible to use VCB to backup? And VCB is a good choice compared to the traditional method that installs the backup client in each virtual machine?   Because I think that in this situation with the data store local, it cannot not reduced the load on ESX hosts and network overhead can be avoided.

  Thank you!

  LAN

  > 1. VCB usable remote tape library? I mean it's not local library and uses the tape library to another network data center.

  VCB is completely unrelated to the tape library, it is a framework, not a backup solution. If your standard backup software can work with the remote tape library you can try it to ungrateful with VCB.

  > 2. what the difference bwteen hot - added NBD and modes if there is that an ESX host with store data local and want to use a virtual machine like VCB proxy? I think that they are the same: the VCB proxy read data through the I/O of the ESX host stack in this situation.

  NBD works on network and the backup traffic goes through the service console connection. Hot add uses special machine for assistance to connect vmdk to and uses of e/s disk stack instead of e/s network.

  > 3. Veeam Backup is free software?

  No, it isn't.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• The ADF Application virtual directory mapping

  I have under entry in my weblogic.xml file and everything works fine.  I want to read < local-> file path of properties so that I need to keep separate for each environment or local weblogic.xml. My production environment (linux) image location is/home/mywork/MyImages

  Is there a way? How can I do?

  < virtual directory mapping >

  C:\JDeveloper\mywork\MyImages < local path > < / local path >

  Dim < url-pattern > / * < / url-pattern >

  < / Directory virtual-mapping >

  Hi me26,.

  You can get this creation of a deployment plan where, at the time of the deployment, you can override this property with a value of the customized environment.

  Follow this link: deployment plans created with Oracle WebLogic. Java Code geeks

  Best regards

• How to create the virtual directory forms 12 c map

  Hi all

  I followed the link to create a virtual directory in 12 c forms, but he failed below.

  https://docs.Oracle.com/middleware/1221/formsandreports/deploy-forms/basics.htm#FSDEP146

  I want to create the virtual directory in ohs1 http server for accessing it via the http server port and the port of Forms Server.

  I want to access the URL like this http:/127.0.0.1:7779/forms/excels/abc.xlsx and http:/127.0.0.1:9001/forms/excels/abc.xlsx.

  Oracle HTTP Server > Administration > Configuration advanced in this i have not seen any forms.conf in the URL of web logic em.

  
  

  I added to forms.conf but it is not accessible. path $DOMAIN_HOME/config/fmwconfig/components/OHS/instances / < NAME of the OHS INSTANCE > /moduleconf/forms.conf

  AliasMatch genres / excels / (. *) "D:\My_dir\$1".

  WLExcludePathOrMimeType /genres/Excel /

  Please review...

  You can use SST to virtual mapping. Simply add these lines to forms.conf:

  RewriteRule ^ / forms/myfiles / (. *) /workaroundmyfiles/$ 1 [PT]
  AliasMatch ^ / workaroundmyfiles / (. *) ""C:\someDirectory$1 ".

  Concerning

• R12 post-installation checks fail with RW-50015 for HTTP, help, virtual directory, JSP Page and Login Page

  Hello

  I try to install EBS R12 for three weeks with the same result (after five fail post-installation verification).

  I tried to install Oracle Linux 5.8 32 bit and Oracle Linux 5.8 64-bit but end result is the same. When I installed Linux oral, I chose all the option packages. I also used the latest version of RapidWiz as suggested by some posts on the forum (and also in response to my other post by Hussein).

  Each installation attempt failed with the following text:

  (x) HTTP                                      (x) Help Page

  Virtual directory (x) (x), JSP

  Login page (x)

  It failed with "RW-50015: error".

  =========

  HTTP

  ====

  check the URL = http://prod.ebs1.com:8000

  RW-50015: error:-HTTP listener does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==========

  Help page

  =========

  check the URL = http://prod.ebs1.com:8000/OA_HTML/help

  RW-50015: error:-Help Page does not. The service may not be started on the port again. Please check the service and use the button try again.

  ========

  Virtual directory

  =================

  RW-50015: error:-Http virtual directory server is not responding. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  JSP

  ===

  check the URL = http://prod.ebs1.com:8000/OA_HTML/jtfTestCookie.jsp

  RW-50015: error:-JSP does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  Login page

  ==========

  RW-50015: error:-Login Page does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  I did find a lot of information to solve this problem.

  Help, please!

  Best regards

  Well, I must fix it in next (trying to start Apache (adapcctl.sh) casts a ' error while loading Shared Libraries: libdb.so.2' on RedHat Linux 5 (Doc ID 879522.1)).

  Once you run the commands in the MOS Doc, stop and start the services than those mentioned above and it should seem so

  Thank you

  Hussein

• Beginning Oracle Internet Directory failure... server context is null

  I try to install Oracle Internet Directory on RHEL5 64 bit for the first time.
  
  The database (11.2.0.3), Weblogic (10.3.6) and OID (11.1.1.6) have everything installed OK, and I run the config.sh script.
  
  I said 'Create the schema' and enter SYS credentials. The installation is fine, but fails to "Start Oracle Internet Directory" at the stage of the component to configure.
  
  I see in the oraInventory/log/install-xxxxx.log

  [2013-01-04T14:15:54.362+13:00] [as] [WARNING] [] [oracle.as.config] [tid: 12] [ecid: 0000Jk314pw3n3kxOw7ECd1GtYLj000003,0] Failed to start component oid1[[
  oracle.as.config.ProvisionException: HTTP status code = 400 : The request parameters did not match any components
          at oracle.as.config.impl.OracleASComponentBaseImpl.manageProcess(OracleASComponentBaseImpl.java:943)
          at oracle.as.config.impl.OracleASComponentBaseImpl.start(OracleASComponentBaseImpl.java:1062)
          at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:153)
          at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
          at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
          at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:364)
          at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
          at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
          at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
          at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
          at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:951)
          at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
          at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
          at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
          at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
          at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
          at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
          at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
          at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
          at java.lang.Thread.run(Thread.java:662)

  and in the oraInventory/log/install-xxxxx... file,...

  ...
  ...
  ...
  Repository Creation Utility - Creating Tablespaces
  Validating and Creating Tablespaces
  Repository Creation Utility - Create
  Repository Create in progress.
  Percent Complete: 0
  Percent Complete: 35
  Percent Complete: 29
  Percent Complete: 91
  Repository Creation Utility: Create - Completion Summary
  Database details:
  Host Name                       : localhost
  Port                            : 1521
  Service Name                    : OID.CTRU.AUCKLAND.AC.NZ
  Connected As                    : sys
  Prefix for (non-prefixable) Schema Owners : DEFAULT_PREFIX
  RCU Logfile                     : /u04/app/oracle/Middleware/Oracle_IDM1/rcu/log/rcu.log
  Component schemas created:
  Component                       Status  Logfile
  Oracle Internet Directory               Success /u04/app/oracle/Middleware/Oracle_IDM1/rcu/log/oid.log
  
  Repository Creation Utility - Create : Operation Completed
  -------------------------------------------------   RCUUtil createOIDRepository status = 0-------------------------------------------------   progress in calculate progress25
    AdminServer port is 7001
    trying to connect to oracleidir.ctru.auckland.ac.nz 7001
    Successful
    getDomainRuntimeMBeanServerConnection ...
    Connecting to Domain runtime ...
    trying to connect to oracleidir.ctru.auckland.ac.nz 7001
    Successfully connected to the Domain Runtime ...
    trying to connect to oracleidir.ctru.auckland.ac.nz 7001
    Successful
    MBean Server Connection is :javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection@1dd9505
  oracleidir.ctru.auckland.ac.nz 7001
  Instance asinst_1 already exists, continuing with component creation
  /u04/app/oracle/Middleware/Oracle_IDM1  /u04/app/oracle/Middleware/asinst_1  asinst_1
  oracle.as.config.ProvisionException: Error Starting OID
          at oracle.iam.management.oid.install.wls.OIDComponentHelper.temp_startOID(OIDComponentHelper.java:1980)
          at oracle.iam.management.oid.install.wls.OIDComponent.postCreateConfig(OIDComponent.java:325)
          at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:145)
          at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
          at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
          at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
          at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
          at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
          at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
          at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
          at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:874)
          at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
          at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
          at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
          at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
          at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
          at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
          at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
          at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
          at java.lang.Thread.run(Thread.java:662)
  Caused by: oracle.as.config.ProvisionException: OID server context is null
          at oracle.iam.management.oid.install.wls.OIDComponentHelper._isOIDSrvUp(OIDComponentHelper.java:2050)
          at oracle.iam.management.oid.install.wls.OIDComponentHelper.temp_startOID(OIDComponentHelper.java:1970)
          ... 19 more

  Is anyone able to point me in the right direction as to the cause of this?
  
  I notice that Metalink ID: "FMW 11g Oracle Internet Directory Configuration process Fail: Error Creating Ascomponent Oid1 [1289015.1 ID]" refers to IPV6. " I only have IPV4 enabled. For OID is mandatory IPV6?
  
  Thanks in advance.

  Hello

  I recommend you to run RCU (11.1.1.6) and to create the schema and configure.

  Kind regards
  Raghav.

• Get the data from a virtual computer store

  I'm looking to get the data from a virtual computer store, but format to be used with vmrun.  My current vmrun statement is:

  vmrun t CR h < IPAddress > https://: 443/SDK u & lt; username & gt; Pei & lt; password & gt; runProgramInGuest "[& lt;. datastorename & gt;] & lt; datastorefolder & gt; / & lt; virtualmachinename & gt;. VMX' c:\myscript.bat

  The idea is to replace & lt; datastorename & gt; given with the name of the LUN that is running on a virtual machine.  In this case, I'm running my statement vmrun from inside a script PowerCLI.  I can use a variables powerCLI, if the vmrun instruction can take and use all escape sequences are needed to adapt the format vmrun to this argument.

  That is right.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Virtual Directory Web.show_document

  Hello
  
  I want to show a document (pdf) that is located on the application server.
  I know that I can use web.show_document, but the question is where I set virtual directory 11.1.2 forms.
  I installed WebLogic, is there anywhere on weblogic where I can open a file in the GUI and set?
  
  Secondly, what should I put in the file to set my virtual directory.
  
  I looked on support.oracle.com and they have some examples but is for Forms 10g and the file they want me open is orion - there is no web.xml in 11.1.2.
  
  So, how can I do this in 11.1.2 forms.
  
  Thank you
  Laba

  You use the standard port defined for your application on Forms. For example, if you have the port 8888 defined, you need to use URL: http://: 8888/my_reports /.

  Craig...

• Virtual directory in the background header image region does not

  I created a region of the head of the region that needs the background image to repeat vertical as horizontal, so that the class has been changed to include repeat them instead of horizontally.
  
  So I replaced class t20RegionHeader with this:
  
  {.t20RegionHeader}
  vertical-align: center;
  make-weight: normal;
  do-size: 9pt;
  make-weight: bold;
  color: #343434;
  background-image: url(/i/hdingBar-BG.gif);
  background-repeat: repeat;
  text-align: left;
  padding: 1px 8px;
  white-space: nowrap;
  border: 1px solid #a3bed8
  }
  
  I put "/ i /" in the url of the background image bacause I am referencing an image in the virtual directory, but it did not work. Help, please!
  
  I have it on APEX. ORACLE.COM:
  
  Workspace: RGWORK
  User: TESTER
  Password: test123
  Application: CreativeTest 41237
  Page: 11
  
  APEX: Application Express 4.0.2.00.07
  DB: Oracle 10.2.0.4
  
  Robert
  http://apexjscss.blogspot.com

  sect55 wrote:
  VC,

  Because the image itself does not exist on the specified path, this is the url that apex is trying to download the image http://apex.oracle.com/i/hdingBar-BG.gif
  
  Please make sure you specify the correct image path
  

  hdingBar-BG is an Oracle supplied image located in the folder of Oracle home\http10g\Apache\Apache\images\themes\theme_20 is why I reference with the image according to the Oracle documentation prefix determines the virtual path, the Web server uses to point to the images directory distributed with Application Builder.) -- /i/

  If your path should be present

  /i/themes/theme_20/hdingBar-BG.gif
  

  Check your application now