Oralce B2B cannot delete the XML file ftp 10g

Similar Questions

• Extractdion failed, cannot delete the output file

  I have Windows Pro 8, 64-bit, 8G of RAM.

  When you try to install the drivers of HP, I get the following error.  Extraction failed, cannot delete the output file.  I get the same error using the download I used to use with Win 7 and a new download from the HP Web site.  I have also tried to run the program as an adminitratior and get the same error message.

  I managed to do the work.  I found on my C drive the location of the files when extracted and run the installation program from there.

• CANNOT OPEN OUTPUT FILE, CANNOT DELETE THE OUTPUT FILE

  Try to patch effect for Deskjet 722C for Windows 7.  Not able to replace the existing .dll files.  Error messages: could not open the output file, cannot delete the output file.

  Thank you for your response.  I found these solutions but still had problems.

  However, I was able to bypass Windows with a DOS command that did the trick.

  C:\Windows\System32>copy C:\temp\hpvdb720.dll C:\windows\system32\spool\drivers\x64\3

• Cannot delete the plist file system.

  My Time Machine is not automatically back up my drive. He worked for some time (don't know why) and then stops working automatically. I tried to implement the procedure laid down by Linc Davis, delete the file com.apple.TimeMachine.plist, but make the message: 'com.apple.TimeMachine.plist' cannot be changed or deleted because it is required by OS X.  I tried to change the permissions in the file information window to include Administrator Read and Write (only has this permission system. Which translates the message: "the operation cannot be performed because you don't have the necessary authorization."

  Using the terminal window and sudo rm command produces the same message.

  I do a backup manually through the system preferences window, but it shows immediately that a backup disk has not been selected. Next time, I select the backup disk, perform a manual backup. Repeat the next time, I have run a manual backup.

  10.11.1 on new iMac, retina 5 K with 16 GB of memory running. Has made a migration to this previous computer Mac Pro 10.7.5.

  Also the Time Machine backup drive icon backup weather icon to see the Machine. Relaunch the Finder does not fix issue.

  Question: How can I delete the plist file?

  Thanks in advance for any advice.

  A bug in OS X 10.11.1 prevents automatic backups that happens when a desktop Mac (iMac, Mac mini or Mac Pro) is connected to a UPS (UPS) with the USB feature.

  Please, back up all data before proceeding.

  First, check the App Store for a later update to OS X. If it is available when you read this review, install it and see if the problem is resolved. I speak not beta versions.

  Otherwise, you can work around the bug as follows.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please triple - click anywhere in the line below on this page to select:

  sudo defaults write /Library/Preferences/com.apple.TimeMachine RequiresACPower 0

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal.

  Restart the computer and test.

  (Credit for this solution for chrfr of logicielmac.com).

• Cannot delete the XML tag

  Hi all! Working in InD CS6 in Windows 7.

  I have a XML element in a document that I can't do anything with and who does not appear to be associated with what in the file of the InD. The red line is pointing to it on the Panel Structure in the image below. Note the X through its icon.

  

  The XML is added to the InD file by mapping tags to styles using the Load... button on the dialog box map tags to Styles and 'import' of another document of the InD.

  When right clicking this item in the Structure of Panel and selecting go to point the current selection goes, but then nothing else happens. Or to delete this in the Panel of Structures . I had a similar problem, a bit a go where I somehow finished with elements in the XML file that were not associated with what anyone in the document. Had those text display in the Structure Panel after the name as shown above, but, even once, go at them will not anywhere. I hadn't studied at the time because I could simply remove it from the structure.

  With this element, however, I can't get rid of it without marking not any frame.

  So, I guess I really questions. It's this thing! How the hell he get there? And is there a better way to remove it rather than not tagging any of the frame and have to re - mark all content.

  EDIT: Just found out that using the trash on the pallet Structure to remove the parent of the problematic element, indeed, removes as problematic. Before him, I was just not marking the parent who has transferred only the problem child (like these word games) for the previous parent.

  Thanks for reading this way-too-long-post.

  All the best,

  Ken

  OK (he said with a blush to cheeks) I get noticed something in common, I didn't before posting.

  Page to which cchimi kindly provided a link described icon as a part empty, and it is attached to an empty block. However, it is not only an empty block.

  What happened in our file, is that the script containing the tag with an anchor marker tag xml that InD apparently do not like much. Type of logic, really.

  Now, I may be cracking, but with a single instance of the element of 'bad' I thought THAT I could see the empty element in the story discovers with the anchor to a few characters on. I selected the anchor and dragged back between the start and end code and icon of the item has changed and he returned 'alive', I was able to handle it. For most other troublesome elements, however, sinpy AND marking a marker of the anchor, the XML tag does NOT display in story mode. The element gets the empty icon when you simply tag the anchor marker, in this case it is an anchor for a rule.

  Hope this might help someone, someday.

  Thanks again for reading.

• Cannot delete the downloaded file.

  I made a simple upload form and try to use the cffile to download, rename, and delete the original file. Thus, the process goes like this.

  Step 1: The user will browse their computer to capture the image they would like to download (ex: picture1.jpg). then click on the button transfer.

  Step 2: Use a cffile which would be to download the file. (picture1.jpg)

  Step 3: Other cffile to rename the original to the user ID picture that I have in the database. (renamed in 1 ".jpg")

  Step 4: Then another cffile to delete the original picture file, so there is only 1 picture, which is that of the renowned cffile. (on server, deleted picture1.jpg 1.jpg)

  hope that makes sense. Here's the code I used to try to get there.

  I always get an error on the part of remove code.

  = Download form =.

  < cfform enctype = "multipart/form-data" method = "post" >

  < h1 > photo download form < / h1 >

  < cfinput type = "file" name = "fileUpload" required = "Yes" message = ""-must add file! "/ >"

  < cfinput type = "hidden" name = "UserID" value = "#URL. User #">"

  < cfinput type = "submit" name = "file_submit" value = "Upload File" / > < br / >

  < / cfform >

  < isDefined ("fileUpload") cfif >

  < cffile action = "upload".

  fileField = "fileUpload".

  destination = "C:\ColdFusion9\wwwroot\website\pimages".

  accept = "image/jpg, image/jpeg, image/pjpeg.

  nameconflict = "makeunique" >

  < font size = "+ 1" > the file has been downloaded. < / make >

  < cffile action = "Rename".

  source = '#FORM. "FileUpload".

  destination = "C:\ColdFusion9\wwwroot\website\pimages\ #FORM. "UserID # .jpg" >

  < cffile action = 'delete '.

  file = 'C:\ColdFusion9\wwwroot\website\pimages\ #FORM. FileUpload #">"

  = Download form =.

  K0rrupt wrote:

  So now my question is this. Is it possible that I can remove 'everything' in the C:\ColdFusion9\wwwroot\website\temp_images\ if I had to make another file of cfm for this function?

  Make sure that some files are in C:\ColdFusion9\wwwroot\website\temp_image. Then complete the following test beforehand.

  This lets you see how ColdFusion stores the directory as a query object. The code that you need follow.

  is the deletion of files in the directory

• Cannot access the XML file on localhost.

  Type localhost or 127.0.0.1 in any browser on a Macintosh (os 10.5) does not have access to the host computer.

  The following Actionscript code generates the following error:

  var XMLURL:URLRequest = new URLRequest ("http://localhost/quoteRotator/quotes1.xml");

  Error opening URL ' http://localhost/quoteRotator/quotes1.XML '

  #2044 error: Unhandled IO error...

  How can I access the XML file using Actionscript 3?

  Thanks for your help.

  use:

  var XMLURL:URLRequest = new URLRequest("quotes1.xml");
  

• Cannot delete the folder/files off computer/Explorer

  Hello

  having a problem with a program. (ITunes). Tried to fix without success, so I removed the program (actually had to remove a lot of different things as suggested by ITunes) after removing everything (in order) from my control panel. (Add/Remove Programs) I was told to go in Solution Explorer and manually delete all the folders/files always on comp...

  Here's the problem; Some of the folders I have to delete tell me I don't have permission to do so! I am the administrator, but still it tells me I can't do this! I tried to change the security settings, but cannot be done. I don't have ownership of these records.

  Everything I need to delete are c; Prgram Files. I manually entered any program that I could not access some years and changes to the security setting, but I noticed that all the program files security settings could NOT be changed.

  HOW to remove these files? I'm sure that if I leave when I re - install ITunes I'm having problems... Please help as Ive tried everything I can think of!

  Hello

  having a problem with a program. (ITunes). Tried to fix without success, so I removed the program (actually had to remove a lot of different things as suggested by ITunes) after removing everything (in order) from my control panel. (Add/Remove Programs) I was told to go in Solution Explorer and manually delete all the folders/files always on comp...

  Here's the problem; Some of the folders I have to delete tell me I don't have permission to do so! I am the administrator, but still it tells me I can't do this! I tried to change the security settings, but cannot be done. I don't have ownership of these records.

  Everything I need to delete are c; Prgram Files. I manually entered any program that I could not access some years and changes to the security setting, but I noticed that all the program files security settings could NOT be changed.

  HOW to remove these files? I'm sure that if I leave when I re - install ITunes I'm having problems... Please help as Ive tried everything I can think of!

  ===============================================
  Sometimes, you can rename a file, then delete it.

  Sometimes, you can move a file and then delete it. at the office, for example.

  Sometimes, you can remove a file after you restart your computer.

  Sometimes, a file otherwise undeletable may be deleted in Mode without failure.

  And... the following freeware can usually remove anything:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Unlocker
  http://www.filehippo.com/download_unlocker/

  Good luck...

• Huge problem, cannot delete the WAV file.

  I have the WAV file on my desktop that I can't move, delete, rename or the properties view.  It is a way by using 100% of my CPU and slow down at all.

  Whenever I try to delete it, it says "preparing to recycle...". "and never finished.

  I'm about to reinstall my operating system because I don't know any other solution.

  Hello

  Run the check point kill too extreme.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot delete the pdf file in windows 8

  When I try to delete a pdf file, the computer starts but then a message that displays "the action cannot be completed because the file is open in another program."
  However, I do not think it actually is. I uninstalled the w.8 then reader app, which is impossible.
  I've only had the phone for two months now and it has been included with the free norton antivirus all the time, so I think that
  It is unlikely that there are malicious software on the laptop.
  Someone has an idea what can do and how I can fix?
  Thank you very much!

  HA, this is a great bug...

  Don't forget to mark your post as answered also, thanks for the tidbit of info, I think I have encountered this bug of Windows too

• Cannot delete the program files x 86

  Hello
  I upgraded from Windows Vista to Windows 7 32 bit 64 bit.

  This is still a Program Files x 86 folder that I am trying to get rid. I managed to remove most of the files, and I was able to change the permission of owner so I can delete some other files.

  However, no matter how I change ownership and permission, I am unable to remove Adobe files and common files.

  Thanks for your suggestions, tips.

  You still need the x 86 folder.  If it was the 32-bit "remains", he would have the x 86 in the name of the folder.  This file is required and is used by many points of 32 bits, which are present in the base 64-bit OS, as objects of assistance of the browser plugins like flash and all the 32-bit programs you run (as all programs in the world, almost, like email clients, email programs, media players, etc.).

  Do not delete this folder.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• Cannot delete the temporary file: msdtadmin, that was detected as virus of McAfee quick clean scan

  Original title: msdtadmin

  Assistance of McAfee quick clean I found all the files except msdtadmin can t be deleted.  What HRT and how do I get rid of him?  What is it? I am using Windows 7 32 bit OS.

  Hello

  Where is the location of the file: msdtadmin?

  Virus can spoof like Windows files/folders and can affect the computer.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run Microsoft Safety scanner and check if there are any threats found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Try the following steps to take possession of the msdtadminand then try to delete the file and check if it helps.

  Follow the steps to take possession of the file/folder:

  1. Open Windows Explorer and locate the file or folder you want to take charge.
  2. Right-click on the file or folder, click Properties, and then click the Security tab.
  3. Click Advanced, and then click the owner tab.
  4. Click Edit, and then do one of the following:
     • To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.
     • To change the owner to a user or group that appears in the area of change of ownership to , click the new owner.
  5. (Optional) To change the owner of all subcontainers and objects in the tree view, select the check box Replace owner of subcontainers and objects .

  For more information, visit this link: http://technet.microsoft.com/en-us/library/cc753659.aspx

  Method 3:

  Try to remove the file in safe mode and check if it helps.

  Boot safe mode in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Hope the information is useful.

• Cannot delete the .lck file and I have administrator access. Windows 7 Professional

  Trying to open a file with 3 Expressions .dwt and a lck record prevents my opening. TPL. tried to delete the file lck and messages said I must have administrator access. I signed as editable. I'm the only person who has used this system and I checked my status and he says: I am the administrator.  Thanks for the help.

  Smitty

  Hello

  Thanks for posting the question. I've surely you will help find a solution on the issue.

  1. what exactly is the problem you are having?

  2. What is the full error message?

  3. Once you get this error?

  Provide the full about the question error message so that we can help you.

• CANNOT DELETE the LARGE FILE - Windows Explorer hangs

  Windows 8

  I made a very large pdf by mistake (14 GB) and now I can't do anything with it. Can not open, delete, move...

  I tried to delete the entire folder where it is located, but also that Windows Explorer crashes.
  I checked the disk for errors, and everything is OK.
  I tried to permanently delete without moving to the trash, as I understand it the trash can sometimes accept very large files. I can highlight the file, but as soon as I click the button remove Ribbon, or right-click, or try to do something with it, Windows Explorer crashes again.
  I have rather a small disc on this machine SSD, and I need this space to the rear...
  Can't think of anything else to try...
  Best regards, K

  Try to remove the file from a command prompt. You can shift right click a folder to see an option "open command window here", which will automatically open the command prompt in the appropriate folder. There is also an "open command prompt here" option on the file menu. If necessary, you can simply open a command prompt and use the cd command to go to the appropriate folder. (.. leave a folder, / to go to the root). Note that the led, remove and erase commands don't send files to trash either.

  Another thing you can try is crushing the PDF file. Type something in a program that is able to save to PDF and try to save it on this PDF. Please tell me if you receive errors overwhelming, because they can help to find out what is the problem. If you have any program capable of PDF, simply typing things into Notepad and overwrite the PDF file with it. (in the Save in drop-down menu, you can select "all files")

  The entry in NTFS, indicating the presence of this 14 GB file is maybe damaged. The disc may have recorded the location of the bad file, or the 14 GB file may not even be there. You can plan to run the chkdsk utility. It flows better in an administrator command prompt. If you are prompted to do so, you should probably run chkdsk /f. I don't know what the side effects might arise from running chkdsk on an SSD, so proceed at your own risk. (I tried to do a search, and all that I could find is that nothing else than / f should not be run on an SSD)

• Cannot delete the VM files from the browser to store data

  Hello

  We have ESX 3.5 Update2

  I have deleted a VM disk by using Infrastructure Client 2.5, but cannot delete browser data store.

  What is wrong and how to fix this?

  Restart the agents on the ESX host management and try again

  service mgmt-vmware restart