Order a swf form another

Similar Questions

• Please help me. How can I unlock my administrator account while accessing this form another hard drive. ?

  Please help me. How can I unlock my administrator account while accessing this form another hard drive. ?

  Please help me...
  I use windows xp svc pack 3. some how it gets corrupted now and all my important data is in the folder my documents on my desk. I got my account with a password. I tried to repair my widows through the recovery console, but I was unable to open a session in my Windows through this procedure just stuck computer is there. even when I tried to fix it through the installation of windows, Setup also stuck on the step where it says "in search for earlier versions of windows."
  now, I tried to copy the data by accessing another operating system on another hard drive but when I opened my account administrator located in the documents and settings folder, it says access is denied. I really need that data on these files is very important to me.
  If you have an administrator password in windows, then the recovery console would need in order to log in the disk system, i.e. the c prompt.

   

  If you tried to do a repair with the cd, then it may not have worked if your cd is the sp2 version of windows on your computer has been updated to sp3 version.  for the sp2 of xp cd works, you will need to uninstall the update to sp3 via Add/Remove programs.

   

  so, now that you have enslaved the hard drive on another computer, you will need to do is try to take ownership of the files/folders:

   

  http://www.bing.com/search?q=how+to+take+ownership+of+folders&src=IE-searchbox&form=IE8SRC

   

  
  --
  db·´¯`·...¸><)))º>

  .

  "honeymtrk" wrote in message news: d1c5394d-1aad-4f12-bd12-bc4b485bc596...

  Please help me. How can I unlock my administrator account while accessing this form another hard drive. ?

  Please help me...
  I use windows xp svc pack 3. some how it gets corrupted now and all my important data is in the folder my documents on my desk. I got my account with a password. I tried to repair my widows through the recovery console, but I was unable to open a session in my Windows through this procedure just stuck computer is there. even when I tried to fix it through the installation of windows, Setup also stuck on the step where it says "in search for earlier versions of windows."
  now, I tried to copy the data by accessing another operating system on another hard drive but when I opened my account administrator located in the documents and settings folder, it says access is denied. I really need that data on these files is very important to me.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Flash as2 cross subject to access the SWF from another server domain

  I have question cross-domain, how do I access the .swf from another swf file without using System.Security.allowDomain() in the swf file, which we are called.

  I use 2 domains and I have 2 files swf is a.com (a.swf) and another is of bcom (b.swf) I want to access the file the a.swf b.swf frames, if I use the system.Security.allowDomain() in b.swf file I can access executives. But without using this way I can access the file from another domain.

  Because I have a risk to change the file b.swf so I vant to go without changing the file b.swf is any other wey to access frames of the file the file a.swf b.swf. Please someone help me solve this problem.

  use a local executable (such as php) to load the b.swf and send it back to a.swf.  for example:

  loadSWF.php:

  <>

  $fh = fopen ("www.b.com/b.swf", "r");

  Header ("Content-type: application/x-shockwave-flash");

  fpassthru ($FH);

  ?>

  a.fla:

  var target_mc:MovieClip=this.createEmptyMovieClip("target_mc",this.getNextHighestDepth());

  target_mc.loadMovie ("loadSWF.php");

• Complete loss of the tab order in the form

  I got a MS Word document (2003) I have open in my MS Word 2010 and saved as a .pdf document.  Then I open the .pdf file in Acrobat Pro v 9.4.7 and used the forms tools to create a form to fill out.  My order of tab shows exactly as I want it to perform.  I close the form.

  I can open this form on my computer - using the TWO Adobe Acrobat Pro AND Adobe Reader 9 (v 9.4.7 also) and the form performs exactly as I intend to.

  However, when I tested it by work colleagues, the form of tab does not perform as expected.  They use Adobe Acrobat Pro v 8.1.3 and Acrobat Reader v 9.0.0.

  Can someone help me understand why this is happening and how I can fix this problem?  Me and one of our developers have spent hours on this and can even lead to the root of the problem and still less resolve the problem.

  Thank you!

  Susan

  It's weird. I don't see the same things you do. The tab order works very well for me in Acrobat (9.4), Reader (9.4) and player (10.1.1).

  When I converted it to an XFA form opening in LiveCycle Designer (8.2.1), the tab order is correct. Note that when you do so, it comments on all the JavaScripts and makes other changes and translates a file of nearly 7 times more.

  A test, try to change the tab order of the form v1 'Order of the lines' in Acrobat and save to a new file. Does make a difference? It would also be interesting to see what happens if the user updates to the latest version of the player.

• Animation is not working when I insert a swf into another, buttons

  I'm new and I'm having a little trouble with loading

  one swf in another for a program principal and preloader.  If you open flashSite.fla or the swf file, everything works, but when I load it into a container of preloaderMomSite mc, the animated buttons no longer work.  If someone could take a look, I know what I'm doing wrong. All the files are located on the same directory.

  Thank you

  Dennis

  As you load another SWF file into your main root timeline and you want to transfer control to the loaded SWF file you call set on the container that hosts the loaded content, since you are using _root. Like this:

  myMCLMain.loadClip ("flashSite.swf", "container2");

  container2._lockroot = true; Add this line after loadClip

  Or you can remove the _root in the loaded SWF file.

• Tab order in the form of the ADF

  Hello
  
  Everyone knows how to set the tab order in a form of the ADF?
  I use Jdeveloper 11.1.1.0.2.
  
  Thank you
  
  Rikke

  I guess you can't set the tab order. The tab order is defined by the sequence of elements in the tree of components.

  Timo

• Can Tecra S10 - I order a recovery to another disk?

  Someone knows how to change the language of Windows 7 on a Tecra S10?
  Can I just order a recovery disc Englsih from here:
  [https://backupmedia.toshiba.eu/landing.aspx]

  If so, what is the price of these discs?

  The PC has a license for the preinstalled Windows 7 Pro 32 bit German, and I need it in English.

  Hello

  I doubt that this will be possible.

  You can order the recovery disk only with the same Windows operating system which was preinstalled on your laptop.

  If you need a different language of Windows or another version of windows, then you will need to purchase an original MS Windows disc.

  This means that you will get the new clean operating system, drivers may be downloaded from the page of European driver of Toshiba.

• using a vi in order to exploit one another vi

  I have several vi that work well independently.  I would write an Executive that will start them, because some of their buttons to press, and when the results are complete, close them and run another vi.

  The function keys in vi mainly use latch... mode causing the events occur in order for the vi to operate.

  Is it necessary to modify the vi by installing another button to cause the same events?

  Is there a simple example of this somewhere.

  I'm not interested in rewriting the vi working

  Thank you

  Hummer 1

  Something like this (LV85)?

  Jean-Marc

• can a field on an update of the top form another field in the same form

  I need to update a value of text field with a drop down value of the same shape.  Is this possible?

  Emre is correct, that you can do only with a formula. Note If you use a string PD type, the formula will display the value not on its label. This is useful if you want the label to be something that is easy to use, but the value can be a code or an abbreviation that is used elsewhere.

  Also an Emre says the formula field will be read-only, but can concatenate the value of the RFP by another string (entered manually, already on the form, of an another PD,...) implement a longer string. This type of approach is sometimes used to define the structures of coding for the elements.

  If you have an integer PD, then you can have the Boolean logic built into the form. Let's look at an example. You have an amount field that you want to split and or show it is Capital or a time-based fees. You can set the following configuration:

  • Amount: currency
  • Type: Costs of Capital (1), (2) [Note: If no value is selected, it will evaluate as a 0]
  • Amount of capital = Type * (Type 2) * amount
  • Fees = Type * (Type - 1) * amount / 2

  The results are:

  • If nothing is selected, the Type is 0, and the other two amounts are 0.
  • If the Capital is selected, the amount of Capital will be defined (1 * 1 * amount) and the amount of spending is 0.
  • If the expenditure is selected, amount of expenditure will be defined (2 * 1 * amount/2) and the amount of Capital is 0.

  This logic can be extended to any number of options of PD, but the logic is quite complicated, and it's basically hard. If you want to change the options later, then this is a great company to make the change.

• Change the tab order in a form without change or move the fields here and there

  Hi all

  I did a complex questionnaire and is almost complete. Now the problem is that when I converted this file from Word, many fields have been detected automatically and their tab order / numbering has been enabled by Acrobat itself. The remaining fields in the form (in different places) were created by myself. Now in the tab order, automatically detected fields are priority and areas that I created, are much different from the corresponding fields in the Numbering tab. For your understanding, I am including the screenshot too. Please see the Numbering tab in the image after field # 7, there are field n ° 28, then area # 26 and then field # 29, which is not the way it should be.

  

  Please indicate any solution (if there is) on your as soon as possible.

  Thanks in anticipation!

  Have you opened the 'Pages' navigation panel and looked at the options on the page?

  There should be a series of options such as 'Row', 'Column' or 'no '. Select the 'line' and see if the shape tablets as you want.

• Imported video does not show what moving published file swf to another location

  I wonder if there is something I need to do for the video file imported to embed in the swf file. When I move the file published to another location, the video does not show. When it is played in the same location as the fact that publication, he plays very well. When I move the video file to the same location as the swf file that is published on another computer, it does not seem to see it. I don't know how to solve this problem. Looking for suggestions. Thank you!

  Got it, thanks again! I actually got to work by converting the mov to flv and video integration.

• Order of the form fields and the name (without CB) in Email

  Hi fans of Muse.

  I have little problem set. order of fields in form of Muse and naming in the submitted e-mails.

  There is a simple form (for a subscription to the newsletter) with 3 fields (tags are off): name, surname and email address.

  Muse site is not hosted on BC and everything works fine (emails sent, name and email are delivered) except these things:

  1. the subject of the email subject is "submission of form XY. Is it possible to change the subject?

  2. in the presentation of muse, I have 1 the name field (for the first name), then a single line filed for the name field, then the email field.

  But the delivered mail reads as:

  Name: XY (First name)

  Email: email

  Custom: XY (family name)

  Is it possible to change the order and rename the fields correctly?

  Thanks in advance

  CPT Hoschi

  The label used in the enamel, is the same thing as the label used in the form of Muse, even if the label is hidden, so you can change your last label of the name "custom" for "last name" field and which should improve the email you get.

  In regard to the order of the fields in the email doesn't match not in order on the page, I think it's a bug of Muse. Muse currently generates e-mail based on the order of the fields in your form, rather than the order from top down. You should be able to affect the order of fields in the e-mail by selecting the individual form fields and choosing "send to back" or "leading" in the menu object.

• Security error: file (call a SWF from another directory)

  I have a program that loads another swf that resides in a different directory.  In this 2nd swf, I need to create a new file object by calling new File (filename);  This generates a security error.  If the two programs are in the same directory, it works fine.

  Is there any solutions to this?

  Thank you!

  If the loaded SWF file is outside the application directory, it is deposited in a different security sandbox and will not have access to the filesystem API - where the security error. (This works when the two rulers are in the same directory, because the two sovereigns are then in the application security sandbox). Note that loading a SWF in a subdirectory of the application should work without a security error.

  The best way to solve the problem is to use the property of the parentSandboxBridge object LoaderInfo associated with the loaded SWF file. You can make a function for the creation and writing of data to the new file to the loaded SWF file. This technique allows you to control exactly what functions the loaded SWF has access to.

  You can also "import" a SWF no application in the field of application security by loading with Loader.loadBytes () method when setting the property allowCodeImport of the LoaderContext object true past. Don't forget to consider the implications in this way, however, given that this SWF essentially runs with the same privileges and permissions as your main application - and can access all the information stored by the application in memory or on 'drive '. As you load a SWF in this way is either remotely or in a location of system files that are accessible by other applications more often, the possibility that the SWF file has been modified by a malicious entity is a real threat that you should take very seriously.

• How to call the SWF in another swf file using xml

  HII,

  I am facing a problem to call a SWF via xml when the loaded xml file it asks another swf file that includes a new xml file. now, if I call this nested swf calling without xml it works but in case of xml, it does not show the result. I confused Mr. how to nested xml file call done in as2/as3. I need some logic. Thanks in advance

  This is the forum of AS3 and your assignment involves AS2 code.  You should repost in the AS2 forum...

  http://forums.Adobe.com/community/Flash/flash_actionscript

  Aside from that, your problem may lie in the following lines...

  _root.createEmptyMovieClip ("sub_container1", 1);
  loadMovie (. attributes.url sub_SWFPath [1], "sub_container1");

  You create the new movieclip, sub_container1, in the _root, but you do not assign the loadMovie to load in the same movieclip (unless you have a _lockroot = true in your sub - swf).  In all cases, you should repost in the AS2 forum to continue troubleshooting.

• Send one swf to another variable

  Hi eo,

  I have an embeded swf in HTML, a preloader that loads another, the same site.

  Now, HTML go to the swf preloader a variable that specify if users choose to skip the intro of the second SWF:

  "" < param name = "movie" value = "... /IMG/preloader.swf <! - skipintro - >" / >

  There is a way to pass this value between the preloader and the loaded swf file? Maybe to a a static proprierty?

  Thank you

  Yes, the child has access to all of the public properties and methods:

  within the scope of the child

  MovieClip (parent) .pubilcFunction ();

  MovieClip (parent) .publicVar;

  trace ("inChild:" + MovieClip (parent) .sw);