Order of installations of Satellite P20

Similar Questions

• Anyone know drivers installation for Satellite A660 - 11 M order

  Someone knows the drivers the order of installation for Satellite a660 - 11 m?

  I have some problem installing Win 7 pro (wlan don't work correctly,
  a few minutes after the start of the computer laptop, neoconservative to run CHKDSK on C: of freezing).

  Reading this forum seems to me that these are not new problems for users of Toshiba.

  Hello

  Where can I find t an installation order on the official website of Toshiba Satellite A660 but as written Akuma, Chipset utility must always be installed everything first and then other pilots.

  But the question is why you n t use Toshiba Recovery disk? It contains a ready to use of images (factory settings). Then you n t need to install additional drivers. ;)

• Order of installation of drivers for Satellite Pro 4600 / Windows 2000

  Does anyone have the installation order of drivers for Satellite Pro 4600 (Windows 2000)? I already found the site to download the drivers ([http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE]), but I don't know in which order should I install them.

  Welcome,

  Floyd

  Hello

  There are not many drivers and utilities, so I recommend starting with Chip Set Utility, Display Driver, Driver Sound, infrared Driver, LAN Driver, Wireless Lan Driver, mouse driver.
  Then follow with common modules and energy-saving, etc.

  Good bye

• Satellite U400 - 138 (PSU44E) - order of installation of drivers for Windows XP

  Hello
  I have the Satellite U400-PSU44E. I had to install Windows XP Professional. Under XP I have problem with installing the drivers. I downloaded Windows XP drivers from the Toshiba web site.

  What is the correct order of installation of drivers for this model?

  Best regards

  Hi mido_92,

  I can give you the order of installation of my Satellite U400 installation and it worked:

  Windows XP SP3
  Windows updates
  Sun Java 2 Runtime Environment
  Intel Chipset driver
  Intel driver
  Audio driver Conexant CX20561
  Driver LAN Marvell 8040/8055
  Synaptics Touch Pad Driver
  Alps Touch Pad Driver
  Conexant Modem driver
  Modem region Select utility
  Intel Wireless LAN driver
  or
  Atheros Wireless LAN driver
  or
  Realtek RTL8187B Wireless LAN Driver
  Chicony camera software
  Bluetooth Stack for Windows by Toshiba
  Software/driver of fingerprints
  TOSHIBA common modules
  TOSHIBA SD Memory utilities
  TOSHIBA ConfigFree
  TOSHIBA Assist
  TOSHIBA Speech System
  CD/DVD Drive Acoustic Silencer
  Toshiba HDD Protection
  TOSHIBA PC Diagnostic Tool
  TOSHIBA Touch ED
  TOSHIBA Hotkey Utility
  TOSHIBA utility
  TOSHIBA control utility
  TOSHIBA Power Saver
  Toshiba zooming Utility

• Order of installation satellite P755-11U own Win 7

  Hello world.

  I want to perform a clean installation of Windows 7 on my laptop and to navigate on the driver page toshiba and forum for the correct order to install drivers & utilities, but without success. Could someone help me please?

  Hello

  May I ask why you n t use disc recovery Toshiba which already contains all the drivers and tools?

  In General, the order of installation is not so important. Just start with the chipset driver installation, then graphics card, LAN, etc.

  Check some similar topics and you can find some useful information and advice. ;)

• External monitor gives strange aspect ration with Satellite P20 XP

  I have a P20-552 (PSP26E-025E9-S4), who is four years and works well with XP Home SP3. For more screen space while editing video I recently bought an external monitor - an Acer X193w. It shows everything what is shown crashed down a little bit, that is to say, but it should show., a circle has a distinctive oval to it.

  It is plugged into my Toshiba with analog cable and the only resolutions that it will give me are 1280 x 1024, 1024 x 768 and 800 x 600 which none do actually correspond to the 1440 x 900 on my Toshiba.

  I tried all the settings that I could find, made sure my BIOS and nVidia are up-to-date and I exchanged a few e-mails with Acer support on the subject. Their support staff is now leading me round in a circle ("it is plug and play," "oh yes, that's sounds wrong", "here is the pilot", "no, we don't give installation instructions" and so on) and still no joy. The screen plug and play perfectly with an another Vista laptop that I have, but I really like to use with my Toshiba faithful.

  Suggestions, please?

  Thank you, Brian.

  Hello Brian

  Sorry, but I believe that there is not a lot, you can do it. It is 19 wide TFT screen and your laptop s video card does not offer good resolution for it. Display modes Satellite P20 cannot offer the resolution 1440 x 900 for external displays.

  * All you can do is try to change the driver display, but on your own risk.*
  Check http://www.laptopvideo2go.com/

• Satellite P20-driver for geforce fx go5200 cannot be installed

  I tried to install the latest drivers from nvidia.com (77.72_win2kxp_english_whql.exe) to upgrade my Satellite P20 - 832 who has a Geforce FX go5200. The installer said it was impossible to find any compatible card on my laptop. I was told 77.72 Nvidia does not support my video card is - it true?
  Thanks in advance.

  Hello

  Drivers for laptops are designed separately. Usually if you want to use the driver for graphics card manufacturer's website there is often a Board use a driver designed by the producer of the laptop. It is very important because mobile cards have lower performance. One reason is the graphics card produces a lot of heat and should not damage other hardware components. I am sure that this driver is designed to protect the graphics card and does not allow that this card works above the limit.

  If you are using another driver for the graphics card there is no limitation, and it can be very dangerous. I am sure that this error message is a kind of protection and don t allow the user to install it on the handheld device because of the protection of graphics card is damaged.

  This isn't a problem of compatibility or something like that.

  Good bye

• Satellite P20-102 - receiver remote not working do not after running recovery CD

  Hello

  I am running Windows Media Center Edition and on my laptop Satellite P20-102.

  I recently needed to run the recovery CD, the process went well except that my box of external remote control receiver provided with my laptop no longer works.

  The box works with XP Media Center Edition and the remote control before I ran the recovery CD. The receiver is detected and installed on the computer when it is connected and recognized in device like a USB Serial Converter Manager. The inner light flashes about 4 seconds. When you press a button on the remote control light both in the housing of the remote control receiver if it receives the signal.

  I guess it's a software problem, I can't find any information on the installation of the receiver or all the drivers for it.

  Any help would be greatly appreciated.

  Kind regards

  Paul

  Hi Paul

  I also P20 but unfortunately without MCE. I can't give you any help, but in my opinion, you should try to contact Toshiba hotline in your country. Maybe it's possible that one phone call can help you manage this matter in the right direction.

• Satellite P20-932 PSP26E - on the motherboard PCI resource conflict

  Hello
  I have a Toshiba P20 932
  REF.: PSP26E-02NH9-GR
  with Windows XP

  In a first step, that the USB port not working, I reinstalled Windows XP with the drivers from the Internet for Toshiba Satellite P20.
  When I start now the following events occur:

  1. Press Start button
  TOSHIBA screen
  Press [F2] for INSTALLATION. Press [F12] to the boot device selection Menu
  1.1 if I press F2 - replace the following screen:
  ? BQ01 BIOS Version V1.10
  CPU = Intel (R) Pentium (R) 4 CPU 3.00 GHz
  ? M 047 system RAM passed
  ? 12K Cache SRAM passed
  System BIOS with a shadow
  Video BIOS with a shadow
  Fixed disk 0:...
  ATAPI CD-ROM:...
  Initialized the mouse
  ERROR
  Conflict of resources - Bus USB PCI controllers on the motherboard
  Bus: 02, device: 00, function: 00

  Press [F2] for installation

  1.1.1. If I press F2 - nothing happens

  1.2. If I press F12: nothing happens

  2. If I press ESC and start the computer, it changes immediately on the screen 2nd with counting / checking of the system's RAM and Cache SRAM... with the same error. and nothing happens if I press F1 to resume or F2 for Setup.

  Then my laptop is not booting and I do not get access to the BIOS! What can I do?

  Dieter cordially

  Hello

  The error indicates that certain devices that are directly connected to the mobo are in conflict and try to share the same resources. This happens usually when the BIOS has been incorrectly installed or the motherboard is a failure.

  In case you would recommend I affecting the default BIOS. But for that you need access to the BIOS, but it seems that it's not possible.

  It seems to be a motherboard problem. You said that the USB ports do not work. Perhaps this is the reason for the error message and question PCI Serial Bus Controller.
  You have USB devices connected to the laptop?
  If so, just unplug the laptop and check again.

  But what to say; If this does not help, I see a lot of options here. In my opinion the mobo must be replaced if it s really a motherboard problem

• Satellite P20-771: Error Message blue screen after the reinstallation of the OS

  I have a portable Satellite P20-771 / Pentium 4 3.40 GHz (800/HTT) / XP Home / 17' with nVidia Geo5700 driver.

  As I had a few problems with the software, and I reinstalled everything using the supplied CD. Unfortunately the canned computer malfunction sent me blue screen errors, which are due (it comes when I sumbit error to Microsoft) to device drivers. I've updated everything (I hope) of the Toshiba page, but I'm not an expert and I'm worried that I missed something or that something has not been loaded in the right order or that the parameter is incorrect.

  I thank in advance for your help

  Roberto

  Hello

  I read in this forum that the Blues screen error message appears due to hardware malfunction or malfunction serious software.
  Usually after installing the new OS since the portable Toshiba Recovery CD should work properly.
  It is not easy to say why the blue screen appears on you laptop.
  Maybe you can post the content of the error message in this forum, and maybe we will find a solution.

• New card 3D Satellite P20 and new application of keyboard

  Hey there,
  I had two questions today.

  I wanted to get a new card for my Toshiba Satellite P20 3D
  I don't want a new laptop since it is my baby.
  My current 3d card is a nVidia Go 5200 32 MB.
  I'm hoping to get 128 MB, although I'll just 64.

  I am also looking for a new keyboard.

  Any links would be appreciated.

  Hi kei.

  You can sometimes increase the amount of allocated RAM tom your graphics card by changing the UMA setting in your BIOS (at least you can with a Phoenix BIOS). If you access your configuration of the BIOS check to see if you can see (usually on the first page of the installation options). My BIOS A30 gives options of 16 MB, 32 MB, 64 Mb (default) and 128 MB.

  For a replacement keyboard, see the following URL: -.
  http://www.laptopbits.co.UK/Database_files/Toshiba_Laptop_Keyboards.htm

  HTH

  HTH

• Can't install NVIDIA GO5200 on Satellite P20 graphics driver

  I uninstalled my NVIDIA driver original because I checked the www.nnidia.com they have the latest version of the driver, so I thought it would be nice.

  But the new driver does not work on my Satellite P20 and now I can't install my old driver because Windows XP keeps coming out with the message "cannot INSTALL THIS NVIDIA GEFORCE GO5200 YEAR DEVICE ERROR OCCURRED DURING THE INSTALLATION OF THE DEVICE ACCESS IS DENIED."

  I need help. I check Microsoft Help and support site, follow through a few examples, but none seems not to work.
  My last option is to reformat and reinstall Windows XP.
  Someone has a gantry solution?

  Hello

  It's no surprise! It of not possible to install the original graphic drivers of the graphics card manufacturing!
  Toshiba use own graphics driver and it are a bit changed due to overheating problems.
  The graphics driver Toshiba control the graphics card temperature level. If the temperature rises to the critical level driver decrease the performance of the card to avoid overheating. Drivers graphic originals don't feature such support!

  That is why it s always advisable to use the graphics drivers Toshiba!

• Satellite P20-304 stops unexpectedly

  I have a laptop satellite P20 304 coming sometimes turns off without warning.
  The screen goes black and the power is off.

  This sometimes happens during a search, but alos is writing a letter. If not necessary a high workload for the laptop.

  Opening vents are free etc. I guess maybe an overheating problem, but wonder if this causes this kind of stop procedere.
  Also - there no poping blue screen or report failure upwards by re-start such as "the system will be re-stored after a major system crash ect.

  No idea what it could be.

  I installed Sandra Sisoft to monitor the temperature, but it only shows me no module to control the temperature,
  respectively, that it does not work.

  My warranty runs out in June, so I want to make sure that I can claim any defect prior to that.

  Thnaks for any input,
  concerning
  Birgit

  Hello

  It's not very easy to say why this laptop stops. It could be an overheating problem or a malfunction of the software. But I tend to overheat.
  Well, the problem of overheating occurs due to her malfunctioning fans or malfunction of the equipment.
  I assume that your warranty is valid, so I recommend you to check your laptop in service partner. Maybe, it can give you a good answer, why this problem occurs.

• Satellite P20 S203: update BIOS after version 1.70

  Hello! I have a Satellite P20 - S203 BIOS is Ver1.70, published on 20/11/2003. I think there pretty outdated now, but there has been no new versions for years and I think that this great computer, despite the old, should be more supported. What I don't understand is why they made an exit for the PSP23E and not for the PSP20E, that make the differences that they should deserve to be updated bios different?

  Does anyone of you know about BIOS versions after 1.70 which allow the laptop to boot from SD cards or removable media? And that the problems of the management of multiple USB devices?
  Thank you

  Hello

  I use P20 over two years, without any update of the BIOS. If your device works well I recommend you to leave. Boot from the SD card is not possible and update the BIOS will not allow this.

  What problem do you have with the USB devices?

• Satellite P20: Possible Solutions to improve my video card

  Hi, I own a Satellite P20, which features:
  3.0 GHz P4 HT
  512 MB of RAM
  internal 60 gb HD
  GeForce FX Go5600 (64 MB of VRAM)

  I am looking for an inexpensive solution to improve or upgrade the specifications of the video to a possible 128 or 256 MB card.
  The price is a problem, but I'm willing to spend more than £600, more if necessary.
  I am only a student in the United Kingdom, but I'm studying Design of games, with my major aspect being 3D art and design.

  Hello

  Usually it of not possible to update the graphics card on the laptop.
  This topic has been discussed a lot of time. Please use the advanced search to search for themes.