Satellite P20-102 - receiver remote not working do not after running recovery CD

Similar Questions

• Satellite P20-404: WLAN is not working

  I wanted to use the adapter wireless network for the first time after a defekt disc and a reinstall. It worked before, but I did not reinstall WLAN right here. Now I don't know how to install it. There is no entry in the network connections that could be my wireless network adapter.

  There should be a built-in Atheros adapter.
  I activated the WLAN-> no light beside the symbol WLAN;
  I FnF8 Switched-> nothing happens, I don't see any unknown hardware in the hardware list.

  Are there opportunities that I don't have a hardware problem?

  Hello

  Are you sure that the WLan worked, before your changed the HARD drive and installed the operating system again?
  I found information that the WLan is optional on Satellite P20-404.
  So I think that some units have been delivered with the wireless network card and others did not.

  It of very strange that the WLan card is not recognized in Device Manager. Usually, if the WLan driver is not installed on the operating system for the wireless network card must be shown as an unknown device.

  I think in your case it s something wrong with the wireless network card or WLan card is not installed.

• Satellite P20-102: Questions about changing CPU

  Hello

  I have a SP20-102 which has a 3.40 Ghz P4 processor. 800 Mhz FSB, 512 KB L2 cache with HT enabled - I think the sSpec is SL793.

  It seems that the cooling mechanism cannot quite in the face of this processor and fan is on a lot, especially when you do any activity of the CPU (for example compile code, etc.).

  I assume that it is possible to replace the processor by another, slower.

  My questions are:

  1. what would be the other CPU compatible with this laptop?

  2. is there any particular CPU should I look out for that will run more cold than the current?

  Thank you

  R.

  Hi Robi

  I have Satellite P20-303 over two years. The camera is awesome and works perfectly. After a year and a half, I noticed that the unit was a little stronger and ventilation was longer on the maximum speed. I removed the plastic on the bottom which cover three events and found a lot of dust and my cat inside s hair. After the dusting and cleaning of the device was not easy again and the use of every day the unit was not strong.

  The physical infrastructure is very well set up and your desire to change CPU is really unnecessary in my opinion. The device, configure on track and enjoy life.

• Satellite C660d-102 Wlan does not appear in Device Manager - which driver?

  My Satellite C660d-102 wlan network adapter does not work it is not displayed in Device Manager...
  Which driver should be used to solve the problem?

  I am using Windows 7 64 bit on it...
  Tried my level best to install the wifi adapter...

  Please help: (...)

  Hello

  Laptop seems to support the Realtek RTL8188CE WLan card.
  You have the Realtek Wlan driver that you can download here.
  http://APS2.toshiba-tro.de/WLAN/

• Satellite P20: WEP key does not fit - only 24 characters

  Salvation; on my satellite p20 there is not enough space to enter a wep key of 26 characters (only 24 places) can someone advise how to configure to accept the 26 characters
  Rgds david

  Hi David

  When you enter your password, only 24 points will be displayed. Please enter the set password and save. When you open it again the number of points will be different again. It is a kind of security features and do not show the actual password length.

• Satellite P10 - sometimes it will not be running

  Hello

  I have a problem with my Toshiba Satellite P10 (bought in 2004).
  Sometimes it will not be running (no air conditioning, no battery) and sometimes the "Shut down" - the dialogue appears as if I had pressed the power button (really, I have not). Then, he died instantly, and I can't turn it on. Rarely turns without touching the power button a few minutes later.

  First, I assumed that the reason was the envelope, but recently the same problem appears despite the case open.

  Finally, I think that the problem is caused by a defective power controller chip. So, I read that I could at least try it deflexing by a hairdryer. This is why I would like to know where the power controller chip is located on the motherboard and how do I recognize it.

  Thanks in advance!

  Sebastian

  Hello

  [If your notebook won power t on sometimes you check out this article: what steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  But I think that no one here can tell you where the power controller is replaced and if you can fix it yourself or not. Here he s only one user to user forum and if you have these technical questions should ask a technician for laptop (authorized service provider) for help. Guys have access to all the databases of Toshiba and can order spare parts Toshiba and it would be no problem for the guys to repair the device for you. ;)

• Satellite P20 PSP26C - touchpad does not work

  Hello...

  My touchpad P20 went down all of a sudden. I've tried everything. Fn + F9 key does not work when I try it will stop the computer.

  I reinstalled the driver several times. I've had enough, so I work with a USB mouse.

  Anyone know how I can retrieve my touchpad. (ALPS)

  Thank you

  Hello

  Eventually he s a hardware malfunction?

  But before that we will offer you a defect of the touchpad, you must reinstall the laptop with the Toshiba Recovery CD delivered to check if this problem could be linked to the software error!

  Usually after installing the recovery CD the laptop will be put back to the factory settings and the whole system should work fine.
  But if this doesn't help then the material could be really defective and a replacement is necessary!

  So check that out!

• Satellite P20-203 combo drive not working properly

  the dvd/cd combo (mast * a uj-811) doesn't recognize any disc. I/o device error. After only a few out of the discs it starts to work without problem until I turn off the laptop. Should I replace it? which is the best choice? do you think that the panasonic 840 correct?
  Thanx

  Hello

  It may be that the disc is broken but you can try to update the firmware. Panasonic is the holding company of the Mat * a, then go to the panasonic and look for a firmware update!

  About changing discs I have no experience, but for as long as I know that only the same drve fit or another tesd readers! With others, you may have problems!

  To bye chris

• Satellite P20: DVD player does not work

  I have a rug * UJ-820 s for a DVD player, but it has stopped working, I put a disc but nothing more to share a bit of ROAR. I looked in the Device Manager, where it says that "the driver may be corrupted or missing. (Code 39) »

  I uninstalled and reinstalled but I still get the same error. Anyone know if there is a update available or if there is something else I should do to address this issue? Thank you.

  Hello

  I noticed that many users on this forum have reported the same issue. It's a very strange question, and I really can't understand why this happen.

  In any case, thanks for the comments.

• Satellite 1900-102: drive will not read discs of backup data after formatting C:

  Help needed desperately, please.
  Formatted my hard drive yesterday as too much evil and adware on computer, it slows down.
  Spending the day together download all udpdates Windows etc.
  CD drive reads audio discs, dvd, program the files on backup disks, utility records...
  ... BUT the habit of reading the data backup discs before formatting, for example, I did. Word documents, power point documents, photos. I get an error message saying: D:\ is not accessible

  any ideas?

  Kevin

  Hello

  I put t know why only this drive doesn t work on you laptop, but if the drive works on another computer then try to create a new backup of data CD and then try to copy the files from the new CD to your Satellite 1900

• resolution of 1920 x 1200 on external screen on Satellite P20 102

  Hello

  I have a SP20-102 and I'm trying so he can display 1920 x 1200 in windows on a screen of LCD external Dell 2407WFP.

  It works fine under Linux, so I know that the machine is capable of it.

  No idea how I can configure Windows to use the 1920 x 1200 resolution?

  R.

  Hello

  I don t know why, but some drivers graphics don t allow to use all the screen resolutions.
  Unfortunately, it doesn't have much to do. If the resolution 1900 x 1200 is not in the list of available resolutions, so you will not be able to use it.

  Maybe another graphic driver would allow you to use this special resolution but I m not 100% sure about this.
  In addition, you should always use drivers Toshiba graphics and if you want to install other graphics drivers IE. Omega drivers so you can do so at you own risk!

• Re: Satellite L670D-102 will start not until after 8 GB RAM Installation

  I went out today and bought the 2 x 4 GB DDR3 ram bars - 8500 the correct ram for my laptop and now I installed the two ram laptop won't start I checked the ram max that can hold the laptop and it is 8 gb that is why I went out a bought the 2 sticks of 4 GB and I had to for this purpose of the 8 GB of ram in total the laptop will not start when the two 4 GB sticks are installed, but when the ram is installed as supplied with the laptop it starts and it starts as if I have the ram that came with the laptop and also one of the 4 GB sticks.

  I'm really nervous as to why it does not work I am 100% sure that ram is good because it starts up with one of them installed aslong as the stock ram is installed, someone knows what the problem please?

  What brand did you buy?
  On this forum you can find many threads where people describe similar problems using the memory modules. Specification is OK but unfortunately work doesn t mobile.

  I can only recommend to use tested 100% and 100% compatible modules.
  Best modules are certainly Kingston modules and 4 GB of RAM for your laptop model KTT KINGSTON part number - 1066 3/4 G (Toshiba PA3677U-1M4G).

  Check it out.

• Satellite P20-761: Windows will not start - it loads agp.sys then freezes

  When I pass my laptop it starts with the Toshiba logo as if commissioning, but then the screen goes black with the following message:

  We apologize for the inconvenience, but windows did not start successfully. A recent hardware of software change might have caused this... etc etc.

  Then I have a list of options to choose from:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good known Configuration
  Start windows normally

  If I have the choice between the options of safe mode the screen goes through a list of files ending with: multi (0) disk (0) partition (1) \WINDOWS\System32\DRIVE.sys, then freezes.

  If I have the choice between the last two options simply, the screen goes black and nothing happens.

  Of I'm desperate is not to lose all the data that I have accumulated on the laptop. Stupid me not a not bother with backups.

  Discs only can I find supplied with the laptop are 'tools and utilities' and 'product recovery dvd - rom '. Seeing that I am not a technical interest, I'm afraid to try just in case I lose all my most important files.

  Help, please! Answers must be plain English as like I said I'm not really technical. Thank you. I cross my fingers.

  Sounds like something wrong with the graphics card or with the graphics driver.

  I think that you have no other choice than to use the Toshiba Recovery CD and attempt to reinstall the OS. I hope that the graphics card doesn t malfunctions.

  It's very sad, because in this case, you will lose the data on the HARD drive.
  Optionally, you can remove the HARD drive and then to connect to little via the USB port on the other computer, then you can make a backup of your data.

• Satellite P20 S203 - Bluetooth does not...

  Just acquired this laptop used and although there seems to be a bluetooth minipci card present when I install the battery Bluetooth I receive the following message appears "Please plug in the bluetooth device button, and then click OK" - doesn't seem to be detecting the module, I checked its seated correctly... ideas anyone? perplexed...

  Thanks in advance...
  Terry

  Take a look on:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/FAQ/bluetoothnotworking.html
  Maybe it can help you find the cause of your problem.

• Re: Satellite A210 - cooling fan will not stop running

  I am owner of a Satellite A210 laptop. I've owned this during 2-3 weeks. Thursday, I noticed that my fan was working very hard, fast and never stop. Before that, he'd come rarely. I restarted the computer and once it came the fan came and does not stop. I left it for 30 minutes and it still continues. I checked down to see if she was overheated and it wasn't. I bought a little chilled out air and breathed he threw the two events, but she still continued.

  Should I take back at the store that I bought and ask if they can fix this problem or is there a solution that I have not found?

  Thank you
  Tyler

  Hello

  Try it please change the option of cooling method in the power settings to see if the cooling fan works more slowly. If there is no difference, you can contact the store and see what they say about it.