Order of the analogue channels 2D DBL NChan NSamp VI

Similar Questions

• Digital TV does not detect the analogue channels

  new digital tv (26AV700A) captures all the available channels, analogue channels in particular. our previous analog tv picked up all the analogue channels when it is connected to the same antenna.

  finished installing (Assistant) and auto scan which finds some of the similar, but not all.

  the menu of configuration, channels submenu, lack two menu items specified in the manual of the TV - both refer to analog channels, IE and

  It seems that some analog key functions are missing - is there a setting that turns the whole thing analog power?

  Hello

  I don t think you will get the right answer here because it is a forum for Toshiba portable computers/computers and all the stuff that has something to do with it.
  If you have some problem with the TV I recommend you to contact your dealer in TV shop. They specialise in these issues and I hope they can help you with this.

  My friends also Toshiba TV and in the settings there is option where you can activate channel scan for channels analog, digital or both of them. There is also the option of quick analysis. Everything is described in s operating manuals.

• Channel showing incorrect programming once the service provider has changed the order of the range Guide

  Guide for Media Center channel problem

  I run vista with the latest version of media center.  My kansas city local cable provider has changed the alignment of channels.  Thus, for example, channel 69 used to be channel history but now 27 is historic canal.  The guide and registration for Media Center shows now incorrect channels and registrations.  I tried the guide update and registration, but it still shows old data.  My cener media shows that it gets data from zap2it.  I got their number and called.  Looking at their site they show the right channel of the station link.  According to them, microsoft is a customer of thiers and regularly updates the info.  So my question is how to get microsoft update so that I can get the right channels to save?

  Both Pitter and bariley:
  in particular, given that your lists as Zap2It are correct, you must submit a Guide data quality feedback form to http://thegreenbutton.com/dqs/Default.aspx (these are sent directly to the persons concerned to the millisecond).

  For Pitter:
  Be a CableCARD card user, you are reliant on two updated data Guide to day, and on your cable company sends a card channel updated timely (and, it varies depending on how it works, as the case may be, you may or may not have a Tuning adapter)
  If you do not have a TA, there is a 'clear channel map' function in the web interface of the InfiniTV4.  If you don't have a TA (or two), then you should do a power reset on him (them), to force them to download a new map.

  HTH,
  Chris

• Toshiba 32W1333DN: name of moving/deleting/edit buttons for the missing channels

  Hello

  I just bought 32W1333DN in Sweden.
  But I can't change the position of the channels in the channel list.

  Both the Quick start guide that comes in the box with the TV and the online manual has pictures and details on how to move/remove the channels and change the names of channel in the channel list.

  I'm supposed to go in
  Menu->-> Edit Channel List channel list.

  Once there, I select channels and perform tasks by selecting the buttons.

  But these buttons aren't where I watch my TV.
  Instead of the buttons for * OK * / * Move * / * remove * / * change name * / * lock * I've * OK * / * lock *.

  What is going on?

  In settings, version of the program is * V.2.1.4A * and upgrade software * V.2.1.9x *.

  Hello

  Please take a look in the user manual
  [Manual Toshiba 32W1333 | http://www.toshiba-om.net/LCD/PDF/English/W1333-32-English.pdf]

  Page 17 provides information on the list of chains, sorting programs and program locking.

  For example, to move the only channel in the list, you must do the following:
  Channel order can be changed according to your personal preferences.

  SELECT the main key channels list menu, then press OK.
  Select modify the channel list to manage all channels. Use upward or downwards and the OK button to select Edit list of strings.
  The Move option in the channel button list and press OK.
  Change number of screen will be displayed. Enter the desired channel number using the number keys on the remote control. If there is a channel previously stored on that number, a warning screen will be displayed. Select Yes if you want to move the channel and press OK.
  Selected channel is now moved.

• Change to error in the export file in the order of the elements in the array of construction

  Hello world

  Some time ago I wrote a vi file that performs the following operations:

  As a first step, it initializes a camera and chooses a region of interest (ROI). Data on the return on investment will be eliminated.

  Then he raster scan engine stage in x and y axis, in bidirectional mode (meaning that x alternating between sweeping left to right and from right to left as is inreased).

  For each point of the analysis, the spectrum is collected, which is then integrated into lambda to give an idea of the total intensity.

  Then the intensity is plotted, as well as the spectrum at each point.

  The final results are exported to a text file.

  The problem:

  If I reverse the order of the son in the 'build' table prior to exporting the file, place the Total Count (intensity) wire instead of thread of the spectrum, the export file fails. By "fails", I mean it's the .txt file contains characters that resemble Chinese!

  Why is this?

  I enclose my .vi, as well as two screenshots that show the problem.

  Hooovahh wrote:

  Such a small change, should not have such a strange result.  I advise to use some debugging tools like highlight the enforcement tools, probe and breakpoint to see what data is when it runs.

  http://www.NI.com/gettingstarted/labviewbasics/debug.htm

  The Source is in 2011.  I see an opportunity and a potential work around certain things to try.

  1. take the following steps
  
  
  • Select each stacked sequence right click and "convert flat sequence.
  
  
  • Select each flat sequence and delete the sequence

  It could simply fix it by itself you want to turn auto-growth on surrounding structures

  2 allows to observe the data in the table build

  • For all wires that are sgl heading construction table insert a dbl and a copy of Allways

  What I suspect LabVIEW is incorrectly re-use of buffers for the inhabitants of sequence

• PCIe-6259 anallog effect of clipping (perhaps overvolting) on other analogously in the input channels?

  Curious to know if the cutting/possible ovevolting on one of the analog channels would affect the performance of other similar channels. I have two systems, one where signals don't clip and the other channels are still operable. The other has some problems of cutting (which fade eventually btw) on some of the ins anlog. One with the cutting on other channels are apparently unusable while those who did no cropping entry seems to be well.

  I seem to be affected by a situation in which hanging on an analog channel makes so that other analog channels do not work.

  Curious to know if I can see what is expected?

  Anyone have an overview here?

  This is how it is supposed to work?

  We do not guarantee that all channels will work normally when you're in a State of fault/over-voltage.

  Since it is a MUX architecture'ed, that the channels are analyzed in order in the amplifier of shared instrumentation and ADC.  If the instrumentation amplifier is on track for channel 0 (for example), it will take some time to recover from this error after the next channel is enabled in.  This can cause a number of incorrect following channels (possibly indicated as being on track).

  Of course, we do not recommend to use this device in an error condition. When you said "analog channels does not" what do you mean?  The data on track?

  Some things that might help:

  -Slower sample which allows more time to settle the instrumentation amplifier

  -Skip the chain incriminated in the scan list

  -Make sure that the offending channel is set to the widest range of voltage (+/-10 v)

• USB-6008 LABVIEW 8.2. SINGLE CHANNEL WITH DBL INPUT VOLTAGE OUTPUT COMPARISON

  I AM WRITING A PROGRAM THAT USES A SIMPLE USB-6008 ANALOG INPUT CHANNEL. I WANT TO READ CONTINUOUSLY THE VOLTAGE FOR 60 SECONDS. I WANT TO COMPARE A TENSION FOR THE PREVIOUS OF THIS SAME CHANNEL VOLTAGE, MAINLY FOR THE PERIOD OF TIME MAX VOLTAGE GIVEN, THEN GET A FINAL VOLTAGE READING. THE OUTPUT OF THE VI IS A DBL. I WANT ONLY TWO TENSIONS OF EXPORT TO EXCEL. TO SAVE TIME, I KNOW HOW TO EXPORT. CAN SOMEONE HELP ME WITH THIS ONE.

  VI needs an register shift related to the Max & Min function. The current value would be the entrance is and the entrance of x is the left shift register. The max value gets wired for the shift register to the right. Don't forget to initialize it. The output of the shift register is the max you would write and the value of the DAQmx Read out of the loop of wire will give you the last reading.

  Your waiting for 45 seconds makes no sense since you said that you wanted to read continuously. You also said that you wanted to read 60 seconds and all this logic is missing. A simple function of time elapsed, it's all you need.

• Add DAQmy Read data (analog 1-d NChan NSamp Wfm) to the shift register

  I have problems when you try to add Reading of DAQmy (analog 1 Wfm NChan NSamp d) data to the registry to offset inside the structure of cases the timeout event. DAQmy Read data 1 d table 3 waveforms (I use 3 channels). I tried with build table (also with additional and for loop, to generate the data for each channel separately), but without success. Suggestions, ideas?

  As I am having some problems attach file .vi, I posted a link where to get the files zip package:

  https://DL.dropboxusercontent.com/u/12580896/vibration_meas_V7.zip

  
  

• Graphical representation of the different channels separately

  I'm a VI design that acquires data from 3 different channels (voltage). The data from each of these channels must be converted separately (user-defined) in other quantities (say, pressure, temp and force). Am I voltage data acquisition and using the formula with coefficients powered by user to convert the data.

  However, I would like to be able to store the data of the amd chart separately. In the above procedure, the signals of all channels are under conversion. I want each channel to undergo a conversion specific and graphic and store the data for each channel separately. How can I do this? Please suggest.

  Thank you

  Dheeraj salvation,

  The order of the signal depends on the order of the DAQ chain that you configure. I think that the signal of channel (ai0) 0th will be available in the branch above the page which is the tension in your case.

  You can mark it as a solution if your problem is resolved so that others can also get help on the wire later. Do not hesitate to ask if you have more doubts.

  Kind regards

  Amine31

  (Bravo to give good answers, mark it as a Solution If your problem is resolved)

• Why the continuous measurement and Logging in LabVIEW 2012 Project uses strings instead of Enums and orders from the queue?

  Hello!

  I noticed that the continuous measurement and a project in LabVIEW 2012 Logging using chains instead of enums and orders from the queue. I wonder if there is a good reason for it?

  Kind regards

  Anguel

  First, string vs enum debate is probably the version of LabVIEW vim vs emacs. There are good arguments on both sides, and I doubt that there is always a "winner".

  A brief summary of our reasoning for the current state of the project examples:

  1. We used enums for the state machine because it is self-contained. A state machine will never tell himself to enter a State, he does not know. Knowing (as the programmer) all possible States with the help of an enum allows you to enlist the compiler in order to help us avoid mistakes to change the time (because you can't quite out an enum and LabVIEW can be said if you are not covering all cases to a structure of the case, etc..).

     Enums provide greater protection and rigidity by ensuring all withdrew at the time of publishing. This is often the 'default' recommendation that we do.

  2. We used strings for messages in queue manager because the producer of message and the message handler could be independent processes that are reused or traded. Channels avoid the need for the compiler to be able to connect the orders and push this responsibility to the programmer. This allows you to develop some sub-components independently as long as you agree to a series of channel commands that you can manage - you need not to share a file 'messages.ctl' or 'states.ctl '. It is conceivable a loop of message management a message it does not, how you can decide to either silently ignore it or will trigger an error (as we do in the model). The strings make it also easier if you want to swap the queues of LabVIEW outside by a TCP implementation for network vacilitate or intra-Processuse communication where the other end may or may not be written in LabVIEW.

     Channels to provide more flexibility (that is, you can add new commands to an existing via plugins system, you can pass parameters as part of the string, etc.) at the expense of pushing her potential errors at run time and to put more responsibility on the programmer.

  3. The actor's gifts frame a 3rd option - using classes such as messages. For me, it combines many of the advantages of these two enumerations (strictly typed, change errors) and strings (flexible and scalable), but with the disadvantage of being somewhat less transparent (you understand OO, be comfortable to navigate through a multitude of screws, legacy of understanding, etc.).

  I don't know there are other reasons, others to the breast OR had or seen as we validated models and examples of projects in-house, but here are my reasons. We know that we can not design for each situation there - our goal is to get useful models against new users to make them aware of what well thought LabVIEW programs are similar to experienced users know their applications better and I hope they do not hesitate to change what we provide or create their own designs, when they feel it's necessary. (On a side note, please share what you come up with - a community of experts sharing models would be really useful to us all LabVIEW users).

  Best regards

  Simon

• Mixing of the audio channels in CS5

  I have some video clips in which each of the two subjects was separately mic'd the microphones were fed to the camera via a splitter, audio to put a topic on the left channel and the other on the right. both are on the same stereo track.  I want to mix the channels so that each is heard on both channels (it's boring to always hear a topic by a speaker and the other through the other speaker).  Is there a way to do this in Premiere Pro?  I hope I don't need mud autour with separate audio in Soundbooth.  Thank you.

  You duplicate tracks in order to have two same then add filling allow one and right padding to the other. Could you post a screenshot of your cs5 change audio options.

• Order of the RMAN file

  In what order does not save rman and recover the data files?

  Is it by # of changes with the last ts df system?

  Thank you!

  -Ken

  Question:

  Assuming that a single channel and filesperset = 1, what order RMAN selects data backup files?

  Answer:

  The order of the files is random. The file names are read from V$ DATAFILE view and because of the bug of the performance, the clause ORDER BY FILE # is deleted, as a result, the query may return file No. in random order.

• Is _ there a way to adjust orders key for switching channels in curves?

  Is _ there a way to adjust orders key for switching channels in curves?

  By that I mean < command > + 1 for cyan, < command > 3 for etc. cyan + magenta etc as Photoshop CS3 rather than < option > 2.

  It's got to be a way under Edit-> keyboard shortcuts - but I can't!

  Thank you

  Hugh

  Hi Hugh,.

  You are in the right place for CS5. For CS4, you will need a plugin option (let me know if you need the location).

  Kind regards

  Steve

  

• Alphabetical order of the music on the new iphone ios10

  I just downloaded the 10 for iphone ios and my downloaded music is now alphabetically by artist when I click on the songs. Is there a way I can fix this so that it is in alphabetical order by the name of the song instead?

  Thanks for any help.

  Go to settings > music > songs of sorting & Albums and select by title.

• Automatic filling of the order of the day

  Hello

  I am trying to automatically fill in an 'order of the day"a"graphical task"as pictured below.  When the date of the order of the day is changed, I would like to as tasks and details of my task card to automatically fill in the order of the day.  Any ideas what formula that I use to get this working?  I worked on it for a few days now, but I can't seem to find the right combination of formulas to make it work.

  

  Thank you

  David

  This can do the trick:

  

  Add a column in the list of tasks as shown above - this column should be the column A now.

  A2 = if (AND (B2 = agenda: $ 1, COUNTA(B2:D2) > 2), MAX $B ($A$ 1: A1) + 1, "")

  It's shorthand dethrone select cell A2, and then type (or copy and paste it here) the formula:

  = IF (AND (B2 = agenda: $ 1, COUNTA(B2:D2) > 2), MAX $B ($A$ 1: A1) + 1, "")

  Select cell A2, copy

  Select cells A2 at the end of the column, paste

  now in the table "Agenda" I suggest merge is NOT the cells in the first row.  My example suppose you follow this advice, and there are two lines:

  -Enter the date in cell B1

  A3 = IF ((LIGNE () −2) ≤MAX(Task Chart::A), LINE (−2), ' ')

  B3 = IF (A3 = "", "", VLOOKUP (ROW (−2, Task Chart::A:D, 3, 0)) ")

  Select cell B3, copy

  Select cell C3, dough

  Select cells A3 to C3, copy

  Select cells A3 at the end of the C column, paste

  now change the text you have in cell B1 of table "Agenda" as needed.