Order, powershell, ssh, do not connect the output

Similar Questions

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• We can connect the output of the sensor directly to the DAQ hardware or any interface necessary?

  We can connect the output of the sensor directly to the DAQ hardware or any interface necessary? If so wat kinda necessary interface?

  How to change the sensor output to match entry-level data acquisition?

  If the sensor output beyond daq range is provided. What are its effects? pls answer

  -It depends on your signal and the type of device you have. Your DAQ provides a package of signals? Also, what type of signal you want to measure? You must select DAQ that matches that. Take a look at the following before you start:

  Getting started with NO-DAQmx: Main Page

  And take a look at table 1 in the following article to wire your signal to the right:

  Wiring and considerations of noise for analog signals

  -You will need to use external circuitory to match the input of data acquisition range.

  -You could damage the unit.

  If you have any other questions, please after return. And, don't forget to give more details about your configuration, the hardware and what you're trying to do.

• Windows 7 do not connect the wireless network adapter

  When in Device Manager it is k o workining with all installed software & advance mode: saying activated

  OM

  Original title: windows 7 do not connect the wireless network adapter when in Device Manager, it works with all installed software & advance mode: saying activated

  Hi omsaini,

  Thanks for posting your query on the Microsoft Community.

  Sorry to hear that you have to connect to a wireless network adapter trouble.

  To help you further on this subject, it would have been really helpful for us if you had

  mentioned a few details such as:

  (1) is there an error message you get when you try to connect to the internet?
  (2) is the persistent problem with all browsers installed on the machine?
  (3) what is the brand and the type of the network adapter (whether ADSL or an adapter included)?

  However, there are a few steps that we can try first:

  a. the following link has a very good tutorial on how to install a network adapter on the computer:

  http://Windows.Microsoft.com/is-is/Windows-XP/help/networking/install-wireless-network-adapter
  (Note: the link is for Windows XP but works for Windows thus 7\8)

  b. the following link provides a holistic approach for DIY difficulty on the connectivity of Windows:

  h ttp://Windows.Microsoft.com/en-US/Windows/Network-Connection-Problem-Help#Network-Problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  c. also, you can visit the following links as well:
        http://Windows.Microsoft.com/en-us/Windows/cant-find-wireless-network#1TC=Windows-7
  And http://windows.microsoft.com/en-us/windows/cant-connect-to-network#1TC=windows-7

  I hope this helps. Please contact us if you encounter any problem.

• APX1099 process does not respect the "output Destination.

  Hi friends!

  I have run the APX1099 process to print COPY B 1099 files and I'll put the 'output destination' until I run it:

  P.S. I have administrative privileges for this directory.

  

  But the files are generated in a different directory and I can not find where this directory has been created (\appserv\prcs\psdev\files\XMLP). The process does not have the 'output destination' that I put forward.

  Does anyone have an idea what could be causing this problem?

  P.S. The output location in report definition routine is defined as "all":

  

  Thank you very much for your help!

  Kind regards

  Tarsio Alvares

  Tarsio Alvares based on code, I see in the App Engine, writing of file is not managed.

  

  You can see that OutDestType = 6 (Web) and % OutDestType = 3 (printer) are dealt with. Technically, should also have some code for % OutDestType = 2 (file) to cover for the file option.

  You will need to write the following code to operate temporarily. Moreover, wear it like a SR with Oracle that this appears to be a delivered report and should be able to print to file.

  If OutDestType = 2 Then %

  & REPORT_DEFN. OutDestination = FilePath %;

  End - If;

  As follows:

  

  Let us know if that helps. Once I added this code, it seems to work very well when I'm printing to a file. Thank you!

• Hi, I can't download the lightroom application - it is not connect the CC

  Hi, I can't download the lightroom application - it is not connect the CC

  Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

• Photosmart c4780 - osX 10.8.4. -printer will not connect the wireless

  printer works fine on usb but not connect the wireless and I need wireless to relocating my printer

  SSID on iMac and printer is different

  How can I likely SSID on printer?

  Finally, I managed to connect my printer to managers using the HP support website. But I needed several attempts

  Thank you all for the help

  Yvon

• problem with ghostscript ["Distill" did not produce the output file]

  Hello
  
  We try to convert the files to PDF using ghostscript.
  The steps that I followed by installing the Distiller
  
  First, I installed gs8.64 and configure distiller
  Refinery engine server-> Conversion Settings-> third-party Application-> Distiller Settings-> options->
  Use GhostScript and the path to install dierctory under C:/Program Files/gs/gs8.64/
  Installed according to the pdf printer
  Conversion-> primary redention web settings-> convert to PDF using third-party applications
  
  Server details:
  CS: 10gr 3
  Ghost script 8.64
  
  Please find details of newspapers below
  
  Error log...
  Copy c:/ucm/server2/vault/~convert/idc/2/2.txt to c:/ucm/server2/vault/~convert/idc/2/temp.ps
  Waiting for exclusive access on c:/ucm/server2/vault/~convert/idc/2/temp.ps
  Get exclusive access to c:/ucm/server2/vault/~convert/idc/2/temp.ps
  Waiting to distill
  Look for the c:/ucm/server2/vault/~convert/idc/2/temp.pdf file does not have
  "Distill" did not produce the output file 'c:/ucm/server2/vault/~convert/idc/2/temp.pdf '.
  Exception type is "java.lang.Throwable". Details
  An error has occurred. The stack trace below shows more information.
  
  ! $Copying c:/ucm/server2/vault/~convert/idc/2/2.txt to c:/ucm/server2/vault/~convert/idc/2/temp.ps < br > waiting for exclusive access on c:/ucm/server2/vault/~convert/idc/2/temp.ps < br > obtained exclusive on c:/ucm/server2/vault/~convert/idc/2/temp.ps < br > access pending on distilled < br > check for the c:/ucm/server2/vault/~convert/idc/2/temp.pdf file has no < br > 'distilling '. did not produce the output file 'c:/ucm/server2/vault/~convert/idc/2/temp.pdf '. < br >! syExceptionType, java.lang.Throwable
  java.lang.Throwable
  at intradoc.common.IdcLogWriter.doMessageAppend (unknown Source)
  at intradoc.common.Log.addMessage (unknown Source)
  at intradoc.common.Log.errorEx2 (unknown Source)
  at intradoc.common.Log.errorEx (unknown Source)
  at docrefinery.agent.Logger.logError(Logger.java:138)
  at docrefinery.convert.StepHandler.executeStepByName(StepHandler.java:140)
  at docrefinery.convert.ConversionDriver.processSteps(ConversionDriver.java:231)
  at docrefinery.convert.ConversionDriver.convertDocument(ConversionDriver.java:144)
  at docrefinery.convert.ConversionDriver.processSubConversion(ConversionDriver.java:165)
  at docrefinery.convert.StepHandler.executeStepByName(StepHandler.java:109)
  at docrefinery.convert.ConversionDriver.processSteps(ConversionDriver.java:231)
  at docrefinery.convert.ConversionDriver.convertDocument(ConversionDriver.java:144)
  at docrefinery.queue.PreConvertedRefineryQueueMonitor.handleCurrentQueueItem(PreConvertedRefineryQueueMonitor.java:204)
  at docrefinery.queue.PreConvertedRefineryQueueMonitor.monitorRefineryPreConverterQueue(PreConvertedRefineryQueueMonitor.java:125)
  to docrefinery.queue.PreConvertedRefineryQueueMonitor$ 1.run(PreConvertedRefineryQueueMonitor.java:93)
  at java.lang.Thread.run(Thread.java:595)
  
  Conversion completed - step PostscriptToPDF forced conversion conversion due to the error engine failure: 'Distil' did not produce the output file 'c:/ucm/server2/vault/~convert/idc/8/temp.pdf '. ». Exception type is "java.lang.Throwable".
  
  
  Please suggest me where I'm wrong...
  
  Thanks in advance,
  
  Prasad V.

  Hello

  This pf ghostscript version has some problems with conversions and I saw what happens sometimes. I recommend you go to 8.63 if available and the restest to see if the conversion fails

  Thank you
  Srinath

• can I connect the outputs analog of a DAQ configuration in series to have the highest voltage source?

  Hello guys,.

  My question is provided in the topic, you have an idea about that? your help is appreciated.

  ELA

  Hi Ela,

  For almost all devices supported by DAQmx, you can't. When all AO channels have the same motive, connecting them in series would be short the output channel on the ground, which is bad.

  However, there is one exception: the SCXI-1124 module has channel-to-channel isolation, which allows channels to be cascaded to output voltages: I can cascading the output voltage of an SCXI-1124 module?

  With channel-to-Earth isolated peripheral (such as NI 926 x or NI 623 x), you can cascade multiple devices together, but not multiple channels on the same device.

  Brad

• SSH does not connect remotely

  I have a pix 501 at a remote site. This isn't a vpn, it's a secure via a reliable LAN network. everything works fine apart from SSH access to the firewall.

  Debug ssh, see the following:

  No group of translation found for tcp source 10.4.4.34/1727 dst inside:10.70.128.1/22

  inside subnet is 10.70.128.0/26

  inside the interface address is 10.70.128.1

  im not using the no nat statement:

  NAT (inside) 0 0.0.0.0 0.0.0.0

  SSH statements:

  SSH 10.4.4.34 255.255.255.255 inside

  management-access inside

  Any ideas why I can access the firewall.

  Hello Michal,

  It seems that the correct orders.

  If the 10.4.1.32 address is inside, you should be able to access the PIX of him.

  If this address belongs to the outside network (and you use within levels of Outdoor/Indoor security according to best practices - > outside) you will not be able to access the PIX inside interface. You can access the PIX inside interface from outside, only through the tunnel.

  It will be useful.

  Best regards

  Eugene

• More prompt not appearing is not on the output of the console with Hyperterminal

  Hello

  When connecting a PC running hyperyterminal on the console of an old Pix 515 firewall port that the output of all commands if poster in a raw without the ususal calls to <--more-->.

  With some PCs, the output is blurred as soon as she leaves the main hyperterminal window, which prevents the fast visualization of the configuration.

  Is this normal?

  Thank you for your help.

  This is possible if someone has defined the lines in the pager on 0. This indicates the PIX to scroll through all the outputs without the prompt '- plus -'. Deliver a "cl"pager"on the PIX and see if it does not help.

  Scott

• No audio out headphones don't connect the output for self-powered satellite speakers or headphones

  The laptop of ACER3680 has and the service through the audio output headphone rare opportunity, but seems to have standing to close. Goes same for self powered satellite speakers that worked at the beginning when new, but as with the helmet seems to be permanent stop. The devices(headphones,speakers) were attached to another laptop and work very well here, but not on the 3680 Acer with Windows XP Media Center Edition. The other laptop where they work is an Acer 5315-2681 with Windows Vista Home Basic. I suspect a driver issue, but multiple downloads have not solved the problem. I was told that there may be a conflict between Acers and Windows embedded audio settings, but I don't know where to look to remove the conflict, help me pleeeeeeaasssee.

  Hi Raif1945,

  You receive an error message while you try to use your headset or speaker amplified satellite auto?

  Please try to download the audio drivers for Acer 3680 Laptop in the link provided and check if it helps:

  http://support.Acer-euro.com/drivers/notebook/as_3680.html

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• does not connect the adapter WiFi AC600 on Win10

  I received the AC600 wifi card and it will not connect to or even show our connection to the internet on my windows laptop 10 5g. It will show the connection 2.4 g, and my laptop has with or without the adapter plugged. I downloaded the disc, I rebooted the router and the computer. He said that all the drivers are up to date. My phone is connected to 5g, so I know that's not the router.

  You have a different SSID for 2.4 Ghz and 5 GHz signals.

  You are running the latest drivers for your version of Windows 10?

  To install the driver:

  1. Download the zip file of the driver on the Linksys support site
  2. Extract the files
  3. Right click on the INF (netrtwlanu.inf) and choose install

• WRT54GL does not connect the new cable Modem

  Hello, I hope someone can help me. I just changed internet providers and my router does not work with the new modem they proived. I had been with ATT and has configured the modem/router ATT to act as a pass through my WRT54GL. Now, when I connect my new modem (which is also a wireless router) to the WRT54GL, I get no connection on the Linksys. However, if I plug in my modem att, resume service (I've not turned my old Internet again until I get this resolved). I tell myself that some setting prevents the WRT54GL to connect but not sure how to determine who it is: I'm not very well informed in this area and only followed a guide online when I configured the router to worek with ATT modem. I'm hoping to avoid resetting the WRT54GL to the deault factory because my old model Roku connects and I cannot change the network, it connects to due to losing the physical remote control. If anyone has any suggestions or can help me trouble shoot, I would really appreciate it!

  HI idkidd,

  You can disable the Wi - Fi modem to avoid any conflict on your Linksys router. And for the WRT54GL work with the new modem, you must reconfigure. The router might still be trying to remember the previous modem settings.

  Try these steps:

  * Connect the computer directly to the modem and check the IP address (Windows) (MAC OSX )

  Note the IP address

  * Now, unplug the modem from the computer

  * Connect the computer to the Ethernet/LAN router (leave the disconnected modem) ports

  * Determine the IP address of the computer, get the router. Then, compare it to the IP address, you have the modem

  * If you get the modem 192.168.1.x and is also the router 192.168.1.x, which means that there is a conflict of IP address

  You can use this link on how to set up the router again with the new set up a router with DSL Internet service Linksys modem

  I hope that these AIDS!