Order still stuck on the processing page!

Similar Questions

• DeskJet 710C still not eject the last page

  Recently I've stepped over XP 12 Xubuntu. During all seemed to install and my deskjet 710 C was acknowledged (USB configuration). However the printer still not eject the last page, when I use the color cartridge and the last lines do not print correctly. (Black and white is fine)

  (The printer will also print colors wrong of a jpg file that has been inserted into a document in pdf, but I don't know if that is related).

  In addition she also will not eject the last page when another computer on my network printing through sharing. (Last page does not eject if I try to print from another computer, either in color or black and white).

  It is perhaps interesting to note that the paperformat by default after that installation has US letter, while I use A4. I tried to print after changing to A4 and after having changed to A4 and reboot...

  Help, please...

  Thanks in advance.

  Kind regards.

  Victor.

  Found 2 low-tech solutions:

  I used an old parallel cable and printing has managed since then!

  The problem of color was a cartridge empty, followed by a new but default cartridge.  The third cartridge worked.

  I can print everything from anywhere in my network now.

• My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  HP Pavilion D7, Windows 7, all parameters are good, network connected, all permit

  Hi ashkin1975,

  Please disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

  From the front of the printer: configuration > network > network by default.  Now, in the same network menu, run the Wireless Setup Wizard.

• Adobe story does not load. Once the program has accepted my password, it is stuck on the "loading" page

  Help! I can't access anything in adobe story. He is perpetually stuck on the loading page. I tried to delete my history and using a private browser page. Nothing works.

  Hello

  Maybe that's a problem with Flash Player or the browser. First upgrade to the latest version of flash player. You can install the last being here: Adobe Flash Player install for all versionshttps://get.adobe.com/flashplayer>. Then try to connect again. ? You can also try another browser to see if it is the problem?

  Thank you!

• Thunderbird is stuck on the start page of mail (Mac, Mavericks)

  Thunderbird has been working well on my Mac, but after the last update + restart, it seems to be stuck on the mail start page. Here is a screenshot: http://i.imgur.com/gKFjEaH.png

  When I click on 'read messages', it is said so "host contacted, the connection information," has no effect. I tried to drag the window from left to right to see if something is missing (it is not), see > > records > > all (it is already) and go > > folder > > my e-mail address > > Inbox (nothing happens).

  He can still send messages without a problem. I can't get to the Inbox.

  Any other ideas? Is this some sort of bug? Very much appreciated.

  Given that you cropped the image, I have to ask. The pane in what folders should appear seems to be present. You say that it's completely empty? Not even a single entry?

  If so,.
  Restart Thunderbird in the Help menu with the disabled modules and see if that solves the problem.

  Then, open the profile folder (there is a button in the troubleshooting information in the Help menu to do it.) close Thunderbird and delete or rename the files to panacea.dat ANDS foldertree.json

  If who disobeys, repeat and delete the session.json file. The first two are simply cache files. The last one contains some parameters of the interface as the reading pane is enabled or disabled and what tabs are open. Really, I don't think that it is an issue, but that he loss of settings is only slightly inconvenient if the other two don't work.

• I stuck on the configuration page

  Hello

  Number of my friends have problems with his laptop, he cannot open his laptop, so he asked me to help him find a solution. It went down in a hotel, the last days and the hotel changed internet provider yesterday, for my friend can't go online and when it restarts his laptop, he goes to the configuration pages saying "progress 0%" and it just stay there forever. He tried to go into safe mode, but the same problem, it just stuck on this page, and he cannot open his laptop. He's got an Asus laptop with windows Vista Home premium.

  You have any ideas what to do or what is the problem?

  Any suggestion is welcome

  Thank you in advance.

  Hello Valpapa,

  Thank you for your message.  Your friend is coming to have his records with him?  If so, he must perform a Startup Repair.  Please let us know the status so that we can help you / him extra.

  See you soon

• Acer aspire one stuck to the charger page

  My netbook gets as far as the windows loader page. The keyboard is unresponsive, as are the usb ports. None of the forum answers work so much they seem to assume that the keys work

  Hello

  all I can suggest is F8 at startup to boot options

  or Alt + F10 at startup start you the process of recovering back to factory settings

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the keys Alt and F10 repeatedly.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the system recovery application is loaded, follow the instructions to reinstall the operating system.

  but you say that no keys don't work

  I suggest you contact acer

  http://support.Acer.com/us/en/default.aspx

• Case statement in the process Page

  Request Express 3.2.1.00.11

  I put the following code in an anonymous block (will return no error) for a process Page;

  BEGIN
  INSERT
    INTO DAD_ASSESSMENT_REQUEST
  ( tenure_id
  , client_id
  )
  VALUES
  ( :P10101_TENURE_ID
  , :P10101_CLIENT_ID 
  );
  END;
  

  But when I put a statement case it throws the following error;

  1 error has occurred
  ORA-06550: line 7, column 3: PL/SQL: ORA-01747: invalid user.table.column, table.column, or column specification ORA-06550: line 3, column 1: PL/SQL: SQL Statement ignored
  

  BEGIN
  INSERT
    INTO DAD_ASSESSMENT_REQUEST
  ( tenure_id
  , client_id
  , (CASE 
     WHEN (:P10101_MEASURE_OPTION = 'AREA') THEN estimated_area_ha 
     WHEN (:P10101_MEASURE_OPTION = 'LINE') THEN estimated_length_km 
   END)
  )
  VALUES
  ( :P10101_TENURE_ID
  , :P10101_CLIENT_ID 
  , :P10101_X
  );
  END;
  

  Why is this code not work and it is possible to use a case statement in a Page Apex process

  Concerning

  Ben

  Benton says:

  Request Express 3.2.1.00.11

  I put the following code in an anonymous block (will return no error) for a process Page;

  1. BEGIN
  2. INSERT
  3. IN DAD_ASSESSMENT_REQUEST
  4. (tenure_id
  5. client_id
  6. )
  7. VALUES
  8. (: P10101_TENURE_ID)
  9. ,: P10101_CLIENT_ID
  10. );
  11. END;

  But when I put a statement case it throws the following error;

  1. 1 error has occurred
  2. ORA-06550: line 7, column 3: PL/SQL: ORA-01747: specification user.table.column, table.column or invalid column ORA-06550: line 3, column 1: PL/SQL: statement ignored
  1. BEGIN
  2. INSERT
  3. IN DAD_ASSESSMENT_REQUEST
  4. (tenure_id
  5. client_id
  6. (CASE
  7. WHEN (: P10101_MEASURE_OPTION = 'SPACE') THEN estimated_area_ha
  8. WHEN (: P10101_MEASURE_OPTION = 'LINE') THEN estimated_length_km
  9. END)
  10. )
  11. VALUES
  12. (: P10101_TENURE_ID)
  13. ,: P10101_CLIENT_ID
  14. ,: P10101_X
  15. );
  16. END;

  Why is this code not work and it is possible to use a case statement in a Page Apex process

  Of course, it is possible to use a CASE statement or expression (it is the latter) in a page APEX process. However, it is not possible to use an invalid syntax while doing so. Part of a clause INSERT INTO can contain only static column names.

  In general the SQL expressions (and also the bind variable, another cause frequent errors of syntax) can be used only in

  • the projections of the SELECT queries and subqueries
  • the right side of the disposals in the SET update clause
  • the lists of VALUES of INSERTs
  • WHERE clause predicates

  ReemaPuri wrote:

  Try this

  INSERT

  IN DAD_ASSESSMENT_REQUEST

  (tenure_id

  client_id

  estimated_area_ha

  estimated_length_km

  )

  VALUES

  (: P10101_TENURE_ID)

  ,: P10101_CLIENT_ID

  , (SELECT CASE WHEN: P10101_MEASURE_OPTION = 'SPACE' AND THEN: P10101_X)

  OTHERWISE, NULL END OF DOUBLE)

  , (SELECT CASE WHEN: P10101_MEASURE_OPTION = 'LINE' THEN: P10101_X)

  OTHERWISE, NULL END OF DOUBLE)

  );

  It's a good idea, but it can be simplified, eliminating unnecessary subqueries:

  insert into dad_assessment_request (
      tenure_id
    , client_id
    , estimated_area_ha
    , estimated_length_km)
  values (
      :p10101_tenure_id
    , :p10101_client_id
    , case
        when :p10101_measure_option = 'AREA' then :p10101_x
      end
    , case
        when :p10101_measure_option = 'LINE' then :p10101_x
      end);
  

• CC 2014 Illustrator will not open, gets stuck on the loading page

  My CC 2014 trial Illustrator will not open.

  He gets stck on the next page to load...

  

  I restarted my computer, out of the creative cloud, done all the updates, but still no progress.

  Suggestions for re - starting my illustrator would be more than welcome!

  Thank you

  Problem solved by session connect. Thanks a lot WENDY for the logon session. I appreciate really.

  The reason was "Duplicate fonts" that have been installed on the machine and fix policies duplicated using the application book fonts from MAC OS solved the problem.

  Kind regards

  Rambour

• Disable the process Page

  I have an APEX 4.0.1 page that has a page process that sends an e-mail alert. Users want the alert. I need to disable this process from page but I want to keep the process in the application for documentation purposes and possibly allow if needs change. What good and setting must be set to disable the process from the page.

  Define the Condition of the process to '' never. ''

• Conditional navigation based on the process page

  Hello
  I need a page to be redirected to another page based on a PL/SQL code. (ie), the landing page is determined by the process of PL/SQL. How can this be achieved?
  Kind regards
  Vignesh

  Vignesh salvation,

  Create a branch of type 'DIRECTION on FUNCTION RETURN PAGE' on your page.

  Sunil Bhatia

• Error ORA-01008 on the process page

  Hi all
  
  I get a ' ORA-01008: not all variables bound "error when saving a process in a page. Here is an overview of the process. All bind variables are used in other processes on the same page with no problems.
  

  DECLARE
  I_EMAIL_SUBJECT      VARCHAR2(100);
  I_EMAIL_BODY         VARCHAR2(4000);
  I_EMAIL_RESULT       NUMBER;
  I_PROCESS_NAME       VARCHAR2(100)  := 'INPUT - Cancel Form';
  
  I_FORM_NUMBER        NUMBER  := TO_NUMBER(:P12_IFORPSP_KEY,'999999');
  I_FORM_VERSION       NUMBER  := TO_NUMBER(:P12_FORM_VERSION,'999999');
  
  I_FUNC_RETURN        VARCHAR2(400)  := NULL;
  
  E_CUSTOM_ERROR       EXCEPTION;
  I_ERROR_MSG          VARCHAR2(4000);
  
  BEGIN
  
     BA_HR_IFO_util_pkg.add_debug_line('-- START --',I_PROCESS_NAME);
     
     --------------------------------
     -- Change WF Step to 'Canceled'
     --------------------------------
     BA_HR_IFO_util_pkg.add_debug_line('Set WF Step to Canceled ',I_PROCESS_NAME);
     -- The function below is triggering the error
     I_FUNC_RETURN := BA_HR_IFO_util_pkg.update_wf_step(p_form_no  => I_FORM_NUMBER,
                                                        p_form_ver => I_FORM_VERSION,
                                                        p_created_by => TO_CHAR(:P12_CREATED_BY),
                                                        p_step_status => TO_CHAR('Canceled'),
                                                        p_next_step_name => TO_CHAR('Canceled Form'),
                                                        p_flex_hiring_freeze => TO_CHAR(:F103_FLEX_HIRING_FREEZE));
     IF I_FUNC_RETURN <> 'S' THEN
        -- Set ERROR msg
        BA_HR_IFO_util_pkg.add_debug_line('Error '||I_FUNC_RETURN,I_PROCESS_NAME);
        I_ERROR_MSG := 'Error: '||I_FUNC_RETURN;
        RAISE E_CUSTOM_ERROR;
     END IF;

  I am using Oracle 11g, APEX 3.2.1
  
  The function is declared on a package in the same pattern. All the parameters of the function are included. The error seems to be when you call the function. However, I have a use this function and bind variables in other procedures.
  
  This is my first post. I hope I included enough information.
  
  Thanks in advance for your help
  
  Carlos

  You can try something like:

  DECLARE
  ...
  I_CREATED_BY      varchar2(100); -- enter correct size here
  I_F103_FLEX_HIRING_FREEZE varchar2(100); -- enter correct size here
  
  BEGIN
  ...
  
  I_CREATED_BY  := v('P12_CREATED_BY');
  I_F103_FLEX_HIRING_FREEZE := v('F103_FLEX_HIRING_FREEZE');
  
     -- The function below is triggering the error
     I_FUNC_RETURN := BA_HR_IFO_util_pkg.update_wf_step(p_form_no  => I_FORM_NUMBER,
                                                        p_form_ver => I_FORM_VERSION,
                                                        p_created_by => I_CREATED_BY,
                                                        p_step_status => 'Canceled',
                                                        p_next_step_name => 'Canceled Form',
                                                        p_flex_hiring_freeze => I_F103_FLEX_HIRING_FREEZE);
  
  ...
  

  Probably, it helps.

  Lev

• Display error message when a condition in the process page returns false

  Hello
  
  I doubt by displaying the error message in a page. In my treatment of the page, I have a process that is assosiated with
  
  a press the button. In the process, I have an 'if' condition and insert in a table when the "If" condition returns true. If
  
  It returns false that I need to display an error message like "cannot insert a value. I tried to give him in the error of process
  
  message, but it is not displaying when the if condition fails. Help, please
  
  
  Thank you
  
  TJ
  
  Edited by: tj2010 Oct 6, 2009 21:25

  Hello

  Have you tried

  If condition = true
  then
  insert into the table;
  on the other
  apex_application.g_print_success_message: = "your Message here";
  end if;

  Make sure that the branch on the page that is triggered after your process has the "success of process message includes" checked.

  Concerning

  Paul

• Call the process page when clicking on a link to report

  Hi all
  I want to call a process of conditional page when clicking on a link to report;
  That is to say the process runs only if the user clicks on the report link.
  How can I do this?
  
  Thanks for your help.
  
  Concerning
  Ozzie

  Hello

  Yes, if you use the column change attributes report, in the section "links" column you can assign values to some articles.

  But if you only need to apply, you should probably use URLS like target and a javascript:doSubmit('REQUEST');.

  Kind regards
  Andrea

• Preview.app stuck on the first page of the PDF in single page mode

  I regularly Preview.app view PDF files and want to use the "Single Page" function to display an entire page at one time. I have 'Single Page' display set as the default behavior.

  Lately when I open a PDF file, they properly open the first page, but I am unable to navigate to another page via the drop-down page, touch up/down arrow. If the PDF file has a table of contents, I am able to go beyond the first page through it and then proceed to navigate normally. If it is not a table of contents, the only solution is to continuous scrolling mode and continue to navigate beyond the first page.

  It's very annoying! Unfortunately, I can't remember where this started happening. It could be when I upgraded to MacOS Sierra, but I can't confirm.

  Everyone else see this behavior?

  Hold down the Option/ALT key, then use the cursor to the TOP or to the BOTTOM of the key.