Orders for ASA

Similar Questions

• authorization order for ASA

  Hi all

  I configured the ASA firewall for permission to order with ACS. For users with the privilege level 15 it works very well. But when I connect with users with privilege level 0, first when I enter the user name and password, it will enter into enable mode. But after that when I put the enable password is not working.password does not work. I configured to use the option of password PAP even in the turn of ACS section for the user. Also is it possible in ASA, is this possible when the user enters the user name and password, it could directly log in exec mode rather than the mode and assign the privilege to the user as configured in the ACS user configuration.

  Thanks in advance

  ANVAR

  You can try a

  Debug aaa approval

  Dan

• GANYMEDE for ASA 5550

  Hello

  How to configure Ganymede for ASA 5550 with acs4.2. I have two asa, one is active and others in mode. pls tell me how to set up. I couldn't find any good docs either.

  Thank you.

  Hi Gavin,

  Here is the sample config for ASA's telnet authentication from Tacacs: username admin password xxxxx privilege 15 aaa-server TEST protocol tacacs+ aaa-server TEST (inside) host x.x.x.x  yyy   [x.x.x.x is the ip address of the tacacs server and is reachable from the inside interface and yyy is the shared secret key.] aaa authentication telnet console TEST LOCAL   [This will send the telnet authentication request to the tacacs server first and if it is not reachable then use the local database of the ASA] aaa authentication ssh console TEST LOCAL    [same as above but for ssh session] aaa authorization exec authentication-server    [this enables exec authorization for the telnet and ssh sessions.] 
  aaa authentication http console TEST LOCAL [for HTTP]
  order of accounting AAA TEST [this helps accountants of the order for all orders entered in the telnet or ssh session.]  On the Ganymede server we need to add this ASA as a RADIUS client with shared secret key yyy.
  
  You can find more details: -.
  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/mgaccess.html#wp1042026
  The GBA, you need to add ASA as device under config network with Protocol Ganymede.
  Thank you
  Vinay
  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.
  		   

• Specials on large order for photo books

  Hello

  is there a discount when you order a large order for photo books?

  Thank you

  ******

  < email published by host >

  You can not order more books in iPhoto. Do you mean with Photos.app?

• A good day! Make an order for the iPhone to your site, the provision of the code ' reservation number is: B2 * Q0A "many skills information. It is impossible to confirm the order. What is the problem?

  A good day!

  Make an order for the iPhone to your site, the provision of the code ' reservation number is: B2 * Q0A "many skills information. It is impossible to confirm the order. What is the problem?

  It is a support so nobody user forum here can help you. Maybe if you release with Apple itself.

  http://www.Apple.com/contact/

  There are links here to the online store.

• Trying to open iTunes to download music, but iTunes needs to not be a compatible mode in order for me to open iTunes

  Original title: itunes

  Hi I'm new this update from Microsoft. I am trying to open iTunes to download music but the iTunes must not be a compatible mode in order for me to open iTunes, I tried lookin for the mode in the settings but not able to find it. If someone could help me, please do.

  Hello

  ITunes is Apple's software.

  And we know nothing on your computer.

  Read this, and if it does not help, contact Apple.

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows 7»

  https://support.Apple.com/en-AU/HT204275

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• BlackBerry Smartphones AT &amp; T cancelled my order for the PRIV

  AT & T just sent me to say that my order for the PRIV was cancelled "due to an unexpected problem in the system."

  Bad luck.  No telling how long I have to wait before AT & t won't support the PRIV.  This week I'll call Customer Service, but I don't expect the rep to know anything.

  Carol Byrd

  I suggest you go to the AT & T website and go through the process of order, but on page two, bottom left, search for AT & T local who have the device. Then exit the screen, go to the local store and buy.

  That's what I did

• How to change the boot order for the applications to the taskbar?

  When I moved to W7, software of my trackball wouldn't work and Kensington wouldn't fix, so I moved to a conventional mouse. I recently bought a better mouse and it has its own software. The software works very well, the problem is that it starts towards the end of the boot sequence. I would like to start earlier. The problem is that all the research I've done changing the order of departure come back with how to change the order of display in the taskbar.

  How can I change the boot order for the applications to the taskbar for the software for the mouse, boots earlier in the list?

  Windows does not have native to adjust the boot order, but there are third party solutions. See

  http://www.howtogeek.com/52043/how-to-control-the-order-of-startup-programs-in-Windows/

• Cisco Anyconnect/WebVPN license for ASA 5510

  Hello

  Someone could please check the licenses for ASA 5510 attachment and let me know. We currently have ASA 5510 with basic license. According to the table attached under VPN sessions, he mentions that "250 combined SESSIONS IPSec and WebVPN" and to "Max box of WebVPN Session" it is mentioned that 2nd meeting, exceeding that we must buy license optional webvpn. While we the 250 combined license for IPSec and webVPN. We must purchase additional anyconnect license to set up remote access for users who want to use the internal resources from outside the network. OrElse, we don't have to purchase license and can configure webvpn/anyconnect of existing combined license existing users basic ASA license? Waiting for your response. Thank you.

  You are welcome.

  1 Yes

  2 AnyConnect requires no Java, but it can he use when connecting to one AnyConnect SSL VPN client and launch the Web browser option start Java-based. There was a bug with the AnyConnect old versions had later who should have addresses. You also have the option to launch via IE and using ActiveX or simply throw AnyConnect directly - neither of these two methods require Java.

  Here is a document TAC on the Java questions if you want more details.

  Please take a moment to note the useful messages and mark your answers questions.

• Trying to download my newly purchased Adobe Photoshop elements 14, after clicking on int o 'my account' and 'My orders', the installation guide tells me to click on the order for more information on the product and which works fine as well. However the ne

  Trying to download my newly purchased Adobe Photoshop elements 14, after clicking on int o 'my account' and 'My orders', the installation guide tells me to click on the order for more information on the product and which works fine as well. However, the next step where I press the download button is not possible, because the download button is not there... What should do? Also when I press the "see the recent downloads" and the error message is displayed.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Hello... I haven't done or don't remember having orders for Bill sent me

  Hello... I haven't done or don't remember having orders for Bill sent me

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• I ordered for the photography of Cc plan but I can't seem to use Lr mobile app because would it every time when I logged in trial version

  I ordered for the photography of Cc plan but I can't seem to use Lr mobile app because would it every time when I logged in trial version

  Hi warayutk,

  Where have you bought the subscription type?

  If you have an educational subscription of the CC, then Lightroom Mobile is not included. Please visit: mobile Lightroom not available for education memberships | Kivuto

  I hope this helps.

  ~ UL

• I had order for package of photography for annual, monthly plan paid... initial amount .and already deducted from my bank account but I havnt got emails or links to the license... keys pls let me know how it works?

  I had order for package of photography for annual, monthly plan paid... initial amount .and already deducted from my bank account but I havnt got emails or links to the license... keys pls let me know how it works?

  Hi John,.

  There is no serial number associated with Adobe CC.

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

• Just place an order for Photoshop and Premiere Elements. I ordered in error windows version. I need to change the Mac version. How?

  Just place an order for Photoshop and Premiere Elements. I ordered in error windows version. I need to change the Mac version. Already obtained serial numbers, but I have not downloaded anything. I called the customer service that they me transferred to HIM and HE asked me to go to the cat. Chat is always busy. How can I change the version before you download?

  Javifran1234,

  To cancel or change orders online, please visit this link:

  Cancel or change orders online

  Guinot

• As a gesture of goodwill, we can help you with the upgrade for PSE 13. We ask you to place the order for Adobe Photoshop elements 13 upgrade and then provide you with the serial number of the full version for the same product against the new upgra

  I have RECIVED YEAR EMAIL FROM ADOBE AS: as gesture of goodwill, we can help you with the upgrade for PSE 13. We ask you to place the order for Adobe Photoshop elements 13 upgrade and then provide you with the serial number of the full version of the product, even against the new order of upgrade"IS this UPGRADE FREE AND CE WHO SHOULD DO, HOW can I HAVE THIS UPGRADE?

  HOW I CAN PLACE THE ORDER AND IS IT FREE?