Organize the hexadecimal data / USB interface

Hello

I implemented a program that send BCD codes on a microcontroller (PIC16F877) (transmission of 8-bit each) via the USB port. Due to synchronization problems, data are transmitted continuously. I can receive the data on labview. However, I cannot read the data all the time and therefore the data read aren't on the right order. I added a starting framework to my data and I would like to know how I can move my bytes to organize them in the right order (Frame/Data1/Data2 /...)? (Perhaps using a loop with a comparison)

So how can I select only some bits? Do I have to reset the other bits?

I hope that I was clear enough. I'm quite a beginner with labview (started a few weeks ago)

Thank you

Hello

Information read in the buffer are types of channels. To work on the BCD code, I probably have to change it to a byte array and then decode byte by byte. But it does not work. The translation is wrong. Do you have any idea why?

I have attached my VI. This is just a test code that I will implement after on my VI read the USB input

Tags: NI Hardware

Similar Questions

  • organize the output data

    Hello world

    I have the following table

    CREATE TABLE TESTMANY

    (

    ITEM_CODE VARCHAR2 (20 BYTE) NOT NULL,

    ITEM_YEAR NUMBER 4 NOT NULL,.

    ITEM_NEW_CODE VARCHAR2 (20 BYTE) NOT NULL,

    ITEM_NEW_YEAR NUMBER 4 NOT NULL

    );

    Insert into TESTMANY

    (ITEM_CODE, ITEM_YEAR, ITEM_NEW_CODE, ITEM_NEW_YEAR)

    Values

    (24 X', 2009, 15 'V', 2007);

    Insert into TESTMANY

    (ITEM_CODE, ITEM_YEAR, ITEM_NEW_CODE, ITEM_NEW_YEAR)

    Values

    ("32F", 2004, "30 YEARS", 2003);

    Insert into TESTMANY

    (ITEM_CODE, ITEM_YEAR, ITEM_NEW_CODE, ITEM_NEW_YEAR)

    Values

    ("54W", 2004, 56 P', 2002);

    Insert into TESTMANY

    (ITEM_CODE, ITEM_YEAR, ITEM_NEW_CODE, ITEM_NEW_YEAR)

    Values

    ("54W', 2004, ' 70 D ', 2002").

    Insert into TESTMANY

    (ITEM_CODE, ITEM_YEAR, ITEM_NEW_CODE, ITEM_NEW_YEAR)

    Values

    ("54W', 2004, '65J", 2002);

    Insert into TESTMANY

    (ITEM_CODE, ITEM_YEAR, ITEM_NEW_CODE, ITEM_NEW_YEAR)

    Values

    (61 X', 2009, 15 'V', 2007);

    COMMIT;

    The data look like this

    Header 1 Header 2 Header 3 Header 4
    61 X20094532010
    34920094532010
    446200465J2012
    446200460%2012
    32F20042022012
    44620044612013

    You can see is 15v to 2 ranks to the point that I can see 15V 51 X and 24 X.

    and 54W linked with 65J, 70 d abd 56 p.

    the result of the will, I want that she, like one to many

    Header 1 Header 2 Header 3 Header 4
    45320077192009
    3492009
    54W200465J2012
    60%2012
    56 P2013
    22'20042022012

    see how to watch now, one to many not need to repeat the code.

    How do you do?

    Thank you

    SQL>  SELECT Nullif(header1, Lag(header1, 1)
  2                           over (
  3                             ORDER BY header1)) header1,
  4         Nullif(header2, Lag(header2, 1)
  5                           over ( partition by header1
  6                             ORDER BY header1)) header2,
  7         header3,
  8         header4
  9  FROM   (SELECT CASE
 10                   WHEN cnt > 1 THEN item_new_code
 11                   ELSE item_code
 12                 END           header1,
 13                 item_year     header2,
 14                 CASE
 15                   WHEN cnt > 1 THEN item_code
 16                   ELSE item_new_code
 17                 END           header3,
 18                 item_new_year header4
 19          FROM   (SELECT item_new_code,
 20                         item_new_year,
 21                         item_code,
 22                         item_year,
 23                         Count(item_new_code)
 24                           over (
 25                             PARTITION BY item_new_code
 26                             ORDER BY item_new_code) cnt
 27                  FROM   testmany)) /* Make modification to display in desired order */
 28  ;

HEADER1                 HEADER2 HEADER3                 HEADER4
-------------------- ---------- -------------------- ----------
15V                        2009 24X                        2010
                                61X                        2010
32F                        2004 30S                        2012
54W                        2004 56P                        2013
                                65J                        2012
                                70D                        2012

6 rows selected.

SQL>

  • Sampling frequency for the output of an acquisition of data USB-6211 card?

    Hello-

    I use a CGI CMOS FireWire camera to read an interference figure, then using a transformed of Fourier transform spectral interferometery (FTSI) phase recovery simple algorithm to detect the relative phase between the successive shots.  My camera has a linear 28 kHz scan rate, and I programmed my phase retrieval algorithm take ms ~0.7 (of a trigger of camera at the exit of the phase). I use the live signal to control a piezoelectric stack, by sending a voltage single sample to the analog output of a data USB-6211 acquisition card.

    Send this output voltage increases the time of my loop 4 m, I would really like to achieve a 1 kHz or better sampling rate. Is the problem with my DAQ card or with the processor in my computer? The DAQ cards of NOR can support these speeds?

    Thank you

    -Mike Chini

    Hey Mike,

    With USB, your loop rate will be around or under 1 kHz, even on the best of the systems. USB has a higher latency and less determism PCI and PCIe. You can get rates AO one much better sample on a PCI card, potentially a PCI-6221. We have a few HAVE points of reference for targets of RT for PCI, / AO in a loop, you should be able to get similar performance in Windows, but if you do a lot other treatments may suffer from your local loop rates.

    Hope this helps,

    Andrew S

  • my project writes the data from the accelerometer on USB but variable shared do not communicate with modbus

    Hello

    I have a program that reads input 3 off 9234 modules on a cRIO, the idea of the program is to read that data and save it in a bin on a disc file hard usb connected, the program uses also the shared variables to connect signals max since the 9234 then send thm to a modbus slave, my problem is that I'm now the exact data on the USB key that I do not get anything It's the modbus link down, I attach the program for you to see, all shared variables are on the loop speed low rt, any help would be grateful.

    Thank you very much

    Jason

    Hi Tori,

    Thanks for the reply I found the flaw that it's on the FPGA 9234 principal, max run-up was forced instead to adapt to the source, now that I've adapted to the source, it works, thank you for taking the time to look at and answer.

    Kind regards

    Jason

  • IAM using windwos vista I try to copy a data file to my wile pc usb port copy the cry of power dwon ofter that I do not find the fine in usb and my pc so how do I get this file back

    IAM using windwos vista that I try to copy a data usb port on my pc wile file copy the cry of power dwon ofter that I can't find the fine in usb and my pc so how do I get that file back please answer me

    Hello

    This program allows you to search for and attempt to recover the file to your C: drive and / or your USB Flash drive.

    http://www.Piriform.com/Recuva

    See you soon.

  • Having a problem installing the software for cable data usb for sagem myc5-3 laptop anyone can help

    I have a sagem myc5-3 laptop and recently bought a data usb cable to enable me to download pictures from my phone, but the software will not be installed correctly. I have windows Vista.

    Someone has an answer to this problem?

    Hello

    1. do you get any error code or error message?

    2. you have the driver software of the Sagem MY C5-3?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Temporarily disable the security software and check if it helps.

    Disable security software:

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:

    Try the steps in the following article from Microsoft to install a program and check if it helps.

    Install a program: http://windows.microsoft.com/en-US/windows-vista/Install-a-program

    Also read the following article from Microsoft and check if it helps.

    Troubleshoot installing or uninstalling programs:

    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

    Hope the information is useful.

  • Envy 15 freeze on the transfer of data USB 3.0 drive when copying many files

    Thanks in advance.

    My brand new envy 15 (model LW897AV) (15 t-3000 CTO) crashes every time that I try to transfer a lot of files from a Flash DRIVE via the USB ports on the laptop.

    It gets about 5 minutes, then simply hangs. He had done this 7 times now. I got a message on a blue screen BSOD once:

    0xE0010002

    After calling technical support HP and Google search, they think it's a problem with the USB 3.0 controller or something to do with the hibernation mode. I updated the driver for USB 3.0 controller. No joy. Also, I changed the power settings to never Hibernate. Still no solution.

    The USB ports on the left side appear to be able to let go. Next to the USB port is a wireless mouse, and he loses too much power (the Green led turns off). Sometimes the mouse keyboard and the touchpad still works. Other times, everything is frozen.

    I can recreate the problem with two different USB drives. Of course, these USB drives have no problem with either of the readers.

    Help!

    Thank you. -ChipTay

    Hi kstoltz. I have the solution for you.

    Return it. I spent more than 20 hours, sending in the dump and bsod messages files. SUPPORT TECHNIQUE IN THE U.S. WAS AWESOME.

    FAR IS A SUPPORT TECHNIQUE WAS SO PAINFUL THAT I THREW ALMOST THE ENVY 15 IN THE MARINA.

    They said it was a problem with the hardware with USB 3.0 ports and file transfers. There was no trouble, so they have defective only intel chips on motherboards out there.

    I had an Exchange with an upgrade of RAM and processor for my troubles.

    :-)

    I love HP.

  • Copy the whole data to usb

    Hello everyone I'm using oracle ebs 11.2.5.10

    the linux operating system 4

    I want to know if I want to copy all the files on a drive hard usb, which is the best option for this

    its time consuming if im trying to copy the application files and datatase of size approximately 200 GB (prodcomn, prodappl, proddata proddb, prodora im copyin 5 records)
    IM using the command cp on linux to copy to a created for the external hard drive mount point


    Thank you

    Salvation;

    I want to know if I want to copy all the files on a drive hard usb, which is the best option for this

    I wonder why you want to copy all the files on usb? Any purpose?

    its time consuming if im trying to copy the application files and datatase of size approximately 200 GB (prodcomn, prodappl, proddata proddb, prodora im copyin 5 records)
    IM using the command cp on linux to copy to a created for the external hard drive mount point

    If your external USB 7200 RPM, that there is no way to make it faster.

    DB files can be easly copy that layer Application, so I suggest using tar or other command zip first and create the zip for the application tier, which save time u on the copy process

    Respect of
    HELIOS

  • How to update the data of the CLI command line interface store

    Dear friends

    I use VMWare Server 2.0 on a debian linux server.

    I need to be able to update the store data from the command line, this because I put the command Refresh within a bash script.

    Of course, I know how the web management, but as you understand, I need to do from the console.

    Thanks for the answer, help or advice

    Robert

    Post edited by: FAsTec

    Hello

    Try vmware-vim-cmd.

    As in:

    vmware-vim-cmd /hostsvc/datastore/refresh

    You may need to add the store of data as a parameter.

    See also:

    http://www.VI-Toolkit.com/wiki/index.php/hostsvc/datastore/refresh

    Beware that your username must have good credentials to run the command.

    Hope this helps

    --
    Wil
    _____________________________________________________
    VI Toolkit & scripts wiki at http://www.vi-toolkit.com

    Writer to the blog www.planetvm.net

    Twitter: @wilva

  • Why PES 10 Organizer jumble of photos at the same date in different places?

    I have 10 PSE installed on a PC with Windows 7. My camera is a Nikon D90 using a Sandisk 8 gb SD card. When I take pictures in different places at the same date and download in the organiser, rather than keep the photos in different places together depending on the place, there the words all this. It does not keep the in order of time from the first to the last for that day, it just mix everything in a random order. Why?

    Hello

    Although we got by.

    What I've noticed, is that you are in the folder view and no thumbnail.

    In the PES 10 folder, the sort order is by filename - [in PES 11 is by date and time with respect to the miniature display].

    If you are going to display-> display file names and check, displayed under thumbnails - will appear in the order?

    Normally it is numbered in the right order-, you renamed photos?

    If it was me, I create two tags, Holyrood and Britania and apply them to appropriate pictures. Then switch to thumbnail view and filter by tag.

    Brian

  • Communication problem between LabView and acquisition of data USB 6259

    I want to monitor a data USB-6259 acquisition using LabVIEW 8.6. However, when you try to create an explicit task (using the DAQ assistant) in order to acquire a signal, I get the message asked supported device found¨. I can see the USB-6259 under ¨Devices and interfaces¨ to the MAX, but when I try to import the configuration data for NOR-DAQmx 8.7.2 in MAX, I get the message ¨Can´t import file configData.nce.  File not found¨. I use NEITHER-DAQmx 8.7.2.  Any suggestions?

    Corneliu

    Hi, Corneliu,

    This question could be generated due to a corruption of database of MAX. Here is a link to restore the database to the MAX.

    http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9?OpenDocument

    Just follow the steps and let me know if that solves the problem.

    A greeting.

    Jesus.

  • How to generate a call via mobile phone connected to the pc by usb

    Hello

    Comment on the call of the UN peut-on generate via mobile phone (nokia6680) connects to the pc by usb from labview?

    I have installed "nokia PC suite". is possible perhaps-this one starting from the palette "Connectivity/library and executable" start this app and automatically generate a call to a predefined number? It sounds complicated and ca me don't think so that it works...

    Apparently these are the commands that allow a cell phone from a PC of Girardon. Y ' there way to use a hyperterminal type program pay to try their hand and then be able to use the VISA features in labview? Pour the moment, I don't see how start. Ports of HyperTerminal manages the communication with RS232 type but comment Girardon the USB Installer takes it a soft pour mobile phone USB connection behaves as a virtual RS232 port?

    I have seen comment importer a dll in labwindows on another project but we must have the description of the dll, the functions name pay to use. In this case, I have all this.

    Thanks if qq can help me car the, I'm blocking (I saw that there were messages on this topic but ca don't allowed me to establish a communication with the phone outside the nokia PC suite software).

    My but is send an alert by such pour a data acquisition application that runs on a computer laptop not connect a network of the United Nations.

    JF

    Finally, it runs. When the telephone connection after installing nokia pc suite and a usb cable, the phone appears like adding a virtual COM and another element: "Nokia 6680 usb modem cable. Select the line corresponding to the additional virtual COM port, in my case, it appears as "COM17. Configuration is easy: choose transmission speed (bps 9800 or else up to 115200bps, apparently the phone can detect the selected speed of the rate), 8 data only bits, no parity, no flow control. Then you can send orders to:

    Xxxxxxxxx ATD. followed by the return to call a wagon phone (the phone number is xxxxxxxxx), at the end of the command is required to call (if there is a detected error 'NO CARRIER')

    to send an SMS, send:

    AT + CMFG = 1

    AT + CMGS = "xxxxxxxxx".

    then tape the message to send, followed by Ctrl-Z (ASCII code: 0x1A)

    If you are interested in this subject, I advice allows you to start the test with hyperterminal or another program to easily implement a serial communication, and then implement in Labview. I guess the AT commands are a little bit different with other phones like Nokia.

    Note: to send Ctrl-Z with Labview, right click on the array of strings in the scheme of hexadecimal code, then select Add 1A and re - click to print the normal code...

  • VMware 5.5 Upgrade breaks access the VMFS data store (kind of)

    Now, before I get off, I will say that I am sure that the host I'm doing this on IS NOT on the HCL.

    (why I'm running old hardware?-c' is a community organization that I volunteer for which relies on hardware dontated)

    However, please read on.

    Updated an IBM x 3500 and a x 3650 (same generation - they are basically Tower and rack mount versions of the same kit) to esxi 5.1 to 5.5.

    (Exactly the same problem on both)

    Local storage - IBM Serveraid (aacraid)

    I was a bit confused as the controllers of disk and LUN show always also visible (just no VMFS didn't recognize any time how I rescan).

    (normally the LUNS do not appear due to a driver does not)

    I found that I was able to get future LUNS by practice

    'Add a storage '.

    "Disk/LUN.

    (30-60 seconds then shows the LUNS)

    1.png

    It shows the drive bays, I click Next and select "mount disc and keep the signature '...

    2.png

    The lun then comes fine and everything works.

    However rebooting it gets lost again and I have to repeat the process to get the VMFS volumes to come back.

    Possible entries for the vmkernel.log

    (2014 04-22 T 19: 56:42.265Z cpu2:33418) vmklnx_aacraid bunch of module: creation succeeded. ID = 0x410a640c1000

    (2014 04-22 T 19: 56:42.265Z cpu2:33418) < 6 > Adaptec aacraid driver 1.2.1.30300

    (2014 04-22 T 19: 56:42.265Z cpu2:33418) PCI: driver aacraid seeks devices

    (2014 04-22 T 19: 56:42.265Z cpu2:33418) DMA: 612: DMA engine ' vmklnxpci - 0:3:0.0' created using the Mapper "DMANull."

    (2014 04-22 T 19: 56:42.265Z cpu2:33418) DMA: 612: DMA engine ' vmklnxpci - 0:3:0.0' created using the Mapper "DMANull."

    (2014 04-22 T 19: 56:42.308Z cpu2:33418) IRQ: 540: 0x2b < aacraid > shareable, flags 0x10

    (2014 04-22 T 19: 56:42.308Z cpu2:33418) VMK_VECTOR: 218: Manager registered for 0xff2b, 0x10 shared interrupt flags

    (2014 04-22 T 19: 56:43.984Z cpu2:33418) aacraid0 < 6 >: kernel 5.2 - 0 [17003] July 25, 2011

    (2014 04-22 T 19: 56:43.984Z cpu2:33418) aacraid0 < 6 >: monitor 5.2 - 0 [17003]

    (2014 04-22 T 19: 56:43.984Z cpu2:33418) aacraid0 < 6 >: bios 5.2 - 0 [17003]

    aacraid0 < 6 >: serial

    (2014 04-22 T 19: 56:44.000Z cpu2:33418) VMK_PCI: 395: 0000:03:00.0 device name: vmhba1

    (2014 04-22 T 19: 56:44.000Z cpu2:33418) DMA: 612: DMA "vmhba1" engine, created using the Mapper "DMANull."

    (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C0:T0:L0': seller: 'SERVERA' model: Rev "DIS1": "V1.0".

    (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 979: path "vmhba1:C0:T0:L0": Type: 0 x 0, rev ANSI: 2 TPGS: 0 (none)

    (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiUid: 273: "vmhba1:C0:T0:L0" path does not support VPD device Id page.

    (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 1105: path 'vmhba1:C0:T0:L0': no standard UID: failure. ANSI version ' SCSI-2' (0x2).»

    (2014 04-22 T 19: 56:44.000Z cpu2:33418) VMWARE SCSI Id: Id for vmhba1:C0:T0:L0

    0 x 39 0 x 62 0 x 34 0 x 63 0x61 0 x 30 0x61 0 x 63 x 0 53 0 x 41 0 x 53 0 x 31 0x20 0x20

    (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 1503: Add the path: vmhba1:C0:T0:L0

    (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C0:T1:L0': seller: 'SERVERA' model: Rev "SATA1": "V1.0".

    (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 979: path "vmhba1:C0:T1:L0": Type: 0 x 0, rev ANSI: 2 TPGS: 0 (none)

    (2014 04-22 T 19: 56:44.001Z cpu2:33418) ScsiUid: 273: "vmhba1:C0:T1:L0" path does not support VPD device Id page.

    (2014 04-22 T 19: 56:44.001Z cpu2:33418) ScsiScan: 1105: path 'vmhba1:C0:T1:L0': no standard UID: failure. ANSI version ' SCSI-2' (0x2).»

    (2014 04-22 T 19: 56:44.001Z cpu2:33418) VMWARE SCSI Id: Id for vmhba1:C0:T1:L0

    0 x 39 0 x 37 x 0 39 0 x 38 0x61 0 x 30 0x61 0 x 63 0 x 53 0 x 41 0 x 54 0x41 0 x 31 0x20

    (2014 04-22 T 19: 56:44.001Z cpu2:33418) ScsiScan: 1503: Add the path: vmhba1:C0:T1:L0

    (2014 04-22 T 19: 56:44.018Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T0:L0': seller: "IBM-ESXS" model: Rev 'ST3300655SS': 'BA2D '.

    (2014 04-22 T 19: 56:44.018Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T0:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

    (2014 04-22 T 19: 56:44.020Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T0:L0: not found

    (2014 04-22 T 19: 56:44.021Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T1:L0': seller: "IBM-ESXS" model: Rev 'ST3300655SS': 'BA2D '.

    (2014 04-22 T 19: 56:44.021Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T1:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

    (2014 04-22 T 19: 56:44.023Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T1:L0: not found

    (2014 04-22 T 19: 56:44.025Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T2:L0': seller: "IBM-ESXS" model: Rev 'ST3300655SS': 'BA2D '.

    (2014 04-22 T 19: 56:44.025Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T2:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

    (2014 04-22 T 19: 56:44.027Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T2:L0: not found

    (2014 04-22 T 19: 56:44.029Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T3:L0': seller: model "IBM-ESXS": "N VPBA300C3ETS11' Rev:"A496.

    (2014 04-22 T 19: 56:44.029Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T3:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

    (2014 04-22 T 19: 56:44.032Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T3:L0: not found

    (2014 04-22 T 19: 56:44.034Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T4:L0': seller: 'HUA72202' model: Rev '0ALA330': 'A34H '.

    (2014 04-22 T 19: 56:44.034Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T4:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

    (2014 04-22 T 19: 56:44.039Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T4:L0: not found

    (2014 04-22 T 19: 56:44.041Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T5:L0': seller: 'HUA72202' model: Rev '0ALA330': 'A34H '.

    (2014 04-22 T 19: 56:44.041Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T5:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

    (2014 04-22 T 19: 56:44.047Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T5:L0: not found

    (2014 04-22 T 19: 56:44.049Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T6:L0': seller: 'HUA72202' model: Rev '0ALA330': 'A34H '.

    (2014 04-22 T 19: 56:44.049Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T6:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

    (2014 04-22 T 19: 56:44.054Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T6:L0: not found

    (2014 04-22 T 19: 56:44.056Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T7:L0': seller: 'HUA72202' model: Rev '0ALA330': 'A3GA '.

    (2014 04-22 T 19: 56:44.056Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T7:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

    (2014 04-22 T 19: 56:44.061Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T7:L0: not found

    (2014 04-22 T 19: 56:44.844Z cpu3:33418) ScsiScan: 976: path 'vmhba1:C3:T0:L0': seller: "IBM" model: "SAS SES-2 DEVICE" Rev: "1.11'."

    (2014 04-22 T 19: 56:44.844Z cpu3:33418) ScsiScan: 979: path "vmhba1:C3:T0:L0": Type: 0xd, ANSI rev: 5, TPGS: 0 (none)

    (2014 04-22 T 19: 56:44.845Z cpu3:33418) ScsiScan: 1503: Add the path: vmhba1:C3:T0:L0

    (2014 04-22 T 19: 56:44.874Z cpu3:33418) ScsiScan: 976: path 'vmhba1:C3:T1:L0': seller: "IBM" model: "SAS SES-2 DEVICE" Rev: "1.11'."

    (2014 04-22 T 19: 56:44.874Z cpu3:33418) ScsiScan: 979: path "vmhba1:C3:T1:L0": Type: 0xd, ANSI rev: 5, TPGS: 0 (none)

    (2014 04-22 T 19: 56:44.874Z cpu3:33418) ScsiScan: 1503: Add the path: vmhba1:C3:T1:L0

    (2014 04-22 T 19: 56:44.903Z cpu3:33418) PCI: driver claimed aacraid device 0000:03:00.0

    (2014 04-22 T 19: 56:44.903Z cpu3:33418) PCI: driver claimed aacraid 1 device

    (2014 04-22 T 19: 56:44.903Z cpu3:33418) ScsiNpiv: 1510: GetInfo for adapter vmhba1, [0x4108991c4400], max_vports = 0, vports_inuse = 0, linktype = 0, status = 0, failreason = 0, m = bad0020

    (2014 04-22 T 19: 56:44.903Z cpu3:33418) Mod: 4780: aacraid initialization succeeded with module ID 4174.

    (2014 04-22 T 19: 56:44.903Z cpu3:33418) aacraid loaded successfully.

    (2014 04-22 T 19: 57:07.090Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba32:C0:T0:L0 '.

    (2014 04-22 T 19: 57:07.090Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba0:C0:T0:L0 '.

    (2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C3:T1:L0 '.

    (2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C3:T0:L0 '.

    (2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C0:T1:L0 '.

    (2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C0:T0:L0 '.

    (2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiUid: 273: "vmhba1:C0:T0:L0" path does not support VPD device Id page.

    (2014 04-22 T 19: 57:07.092Z cpu6:33204) VMWARE SCSI Id: Id for vmhba1:C0:T0:L0

    0 x 39 0 x 62 0 x 34 0 x 63 0x61 0 x 30 0x61 0 x 63 x 0 53 0 x 41 0 x 53 0 x 31 0x20 0x20

    (2014 04-22 T 19: 57:07.092Z cpu6:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba1:C0:T0:L0 for the device "unregistered".

    (2014 04-22 T 19: 57:07.092Z cpu6:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]

    (2014 04-22 T 19: 57:07.092Z cpu6:33204) ScsiEvents: 501: events subsystem: device, created events!

    (2014 04-22 T 19: 57:07.092Z cpu6:33204) VMWARE SCSI Id: Id for vmhba1:C0:T0:L0

    0 x 39 0 x 62 0 x 34 0 x 63 0x61 0 x 30 0x61 0 x 63 x 0 53 0 x 41 0 x 53 0 x 31 0x20 0x20

    (2014 04-22 T 19: 57:07.092Z cpu6:33204) ScsiDeviceIO: 7419: get VPD 83 inquiry for device "mpx.vmhba1:C0:T0:L0" from Plugin "NMP" failed. Not supported

    (2014 04-22 T 19: 57:07.092Z cpu6:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "mpx.vmhba1:C0:T0:L0" from Plugin "NMP" failed. Not supported

    (2014 04-22 T 19: 57:07.092Z cpu7:33204) ScsiDeviceIO: 6169: QErr setting for mpx.vmhba1:C0:T0:L0 unit could not detect. Failure of the error.

    (2014 04-22 T 19: 57:07.114Z cpu2:33204) SFS: 5092: pilot no. FS claimed device 'mpx.vmhba1:C0:T0:L0:1': not supported

    (2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiDevice: 3443: device successfully registered "mpx.vmhba1:C0:T0:L0" from plugin "NMP" of type 0

    (2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiUid: 273: "vmhba1:C0:T1:L0" path does not support VPD device Id page.

    (2014 04-22 T 19: 57:07.114Z cpu2:33204) VMWARE SCSI Id: Id for vmhba1:C0:T1:L0

    0 x 39 0 x 37 x 0 39 0 x 38 0x61 0 x 30 0x61 0 x 63 0 x 53 0 x 41 0 x 54 0x41 0 x 31 0x20

    (2014 04-22 T 19: 57:07.114Z cpu2:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba1:C0:T1:L0 for the device "unregistered".

    (2014 04-22 T 19: 57:07.114Z cpu2:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]

    (2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiEvents: 501: events subsystem: device, created events!

    (2014 04-22 T 19: 57:07.114Z cpu2:33204) VMWARE SCSI Id: Id for vmhba1:C0:T1:L0

    0 x 39 0 x 37 x 0 39 0 x 38 0x61 0 x 30 0x61 0 x 63 0 x 53 0 x 41 0 x 54 0x41 0 x 31 0x20

    (2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiDeviceIO: 7419: get VPD 83 inquiry for device "mpx.vmhba1:C0:T1:L0" from Plugin "NMP" failed. Not supported

    (2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "mpx.vmhba1:C0:T1:L0" from Plugin "NMP" failed. Not supported

    (2014 04-22 T 19: 57:07.115Z cpu2:33204) ScsiDeviceIO: 6169: QErr setting for mpx.vmhba1:C0:T1:L0 of the unit could not detect. Failure of the error.

    (2014 04-22 T 19: 57:07.154Z cpu2:33204) SFS: 5092: pilot no. FS claimed device 'mpx.vmhba1:C0:T1:L0:1': not supported

    (2014 04-22 T 19: 57:07.154Z cpu2:33204) ScsiDevice: 3443: device successfully registered "mpx.vmhba1:C0:T1:L0" from plugin "NMP" of type 0

    (2014 04-22 T 19: 57:07.156Z cpu2:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba1:C3:T0:L0 for the device "unregistered".

    (2014 04-22 T 19: 57:07.156Z cpu2:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]

    (2014 04-22 T 19: 57:07.156Z cpu2:33204) ScsiEvents: 501: events subsystem: device, created events!

    (2014 04-22 T 19: 57:07.156Z cpu2:33204) VMWARE SCSI Id: Id for vmhba1:C3:T0:L0

    0 x 50 0x05 0 x 07 0x6c 0 x 07 0xbf 0xe2 0 x 79 0 x 53 x 0 41 0 x 53 0x20 0 x 53 0 x 45

    (2014 04-22 T 19: 57:07.156Z cpu2:33204) ScsiDeviceIO: 7409: get VPD 80 inquiry for device "naa.5005076c07bfe279" from Plugin "NMP" failed. Not supported

    (2014 04-22 T 19: 57:07.156Z cpu2:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "naa.5005076c07bfe279" from Plugin "NMP" failed. Not supported

    (2014 04-22 T 19: 57:07.166Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe279' the path 'vmhba1:C3:T0:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

    (2014 04-22 T 19: 57:07.166Z cpu3:32792) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.5005076c07bfe279' of device NMP doubt; asked the State of the fast path update...

    (2014 04-22 T 19: 57:07.166Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 24 world 0-dev 'naa.5005076c07bfe279' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

    (2014 04-22 T 19: 57:07.187Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe279' the path 'vmhba1:C3:T0:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

    (2014 04-22 T 19: 57:07.207Z cpu2:33204) ScsiDeviceIO: 6169: QErr setting for naa.5005076c07bfe279 of the unit could not detect. Initiator error of storage.

    (2014 04-22 T 19: 57:07.217Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 25 world 0-dev 'naa.5005076c07bfe279' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

    (2014 04-22 T 19: 57:07.253Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 26 0-dev 'naa.5005076c07bfe279' world has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

    (2014 04-22 T 19: 57:07.289Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0x27 0-dev 'naa.5005076c07bfe279' world has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

    (2014 04-22 T 19: 57:07.317Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe279' the path 'vmhba1:C3:T0:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

    (2014 04-22 T 19: 57:07.317Z cpu2:33204) ScsiDevice: 3443: device successfully registered "naa.5005076c07bfe279" from plugin "NMP" of type 13

    (2014 04-22 T 19: 57:07.318Z cpu2:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba1:C3:T1:L0 for the device "unregistered".

    (2014 04-22 T 19: 57:07.318Z cpu2:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]

    (2014 04-22 T 19: 57:07.318Z cpu2:33204) ScsiEvents: 501: events subsystem: device, created events!

    (2014 04-22 T 19: 57:07.318Z cpu2:33204) VMWARE SCSI Id: Id for vmhba1:C3:T1:L0

    0 x 50 0x05 0 x 07 0x6c 0 x 07 0xbf 0xe2 0x7b 0 x 53 x 0 41 0 x 53 0x20 0 x 53 0 x 45

    (2014 04-22 T 19: 57:07.318Z cpu2:33204) ScsiDeviceIO: 7409: get VPD 80 inquiry for device "naa.5005076c07bfe27b" from Plugin "NMP" failed. Not supported

    (2014 04-22 T 19: 57:07.318Z cpu2:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "naa.5005076c07bfe27b" from Plugin "NMP" failed. Not supported

    (2014 04-22 T 19: 57:07.328Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe27b' the path 'vmhba1:C3:T1:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

    (2014 04-22 T 19: 57:07.328Z cpu3:32792) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.5005076c07bfe27b' of device NMP doubt; asked the State of the fast path update...

    (2014 04-22 T 19: 57:07.328Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 28 World 0-dev 'naa.5005076c07bfe27b' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

    (2014 04-22 T 19: 57:07.350Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe27b' the path 'vmhba1:C3:T1:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

    (2014 04-22 T 19: 57:07.371Z cpu2:33204) ScsiDeviceIO: 6169: QErr setting for naa.5005076c07bfe27b of the unit could not detect. Initiator error of storage.

    (2014 04-22 T 19: 57:07.381Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 29 World 0-dev 'naa.5005076c07bfe27b' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

    (2014 04-22 T 19: 57:07.417Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0x2a 0-dev 'naa.5005076c07bfe27b' world has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

    (2014 04-22 T 19: 57:07.453Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0x2b world 0-dev 'naa.5005076c07bfe27b' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

    (2014 04-22 T 19: 57:07.479Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe27b' the path 'vmhba1:C3:T1:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

    (2014 04-22 T 19: 57:07.479Z cpu2:33204) ScsiDevice: 3443: device successfully registered "naa.5005076c07bfe27b" from plugin "NMP" of type 13

    (2014 04-22 T 19: 57:07.501Z cpu2:33204) ScsiUid: 273: "vmhba0:C0:T0:L0" path does not support VPD device Id page.

    (2014 04-22 T 19: 57:07.510Z cpu2:33204) VMWARE SCSI Id: could not get the disc for vmhba0:C0:T0:L0 id

    (2014 04-22 T 19: 57:07.510Z cpu2:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba0:C0:T0:L0 for the device "unregistered".

    (2014 04-22 T 19: 57:07.511Z cpu2:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]

    (2014 04-22 T 19: 57:07.511Z cpu2:33204) ScsiEvents: 501: events subsystem: device, created events!

    (2014 04-22 T 19: 57:07.520Z cpu2:33204) VMWARE SCSI Id: could not get the disc for vmhba0:C0:T0:L0 id

    (2014 04-22 T 19: 57:07.520Z cpu2:33204) ScsiDeviceIO: 7409: get VPD 80 inquiry for device "mpx.vmhba0:C0:T0:L0" from Plugin "NMP" failed. Not supported

    (2014 04-22 T 19: 57:07.520Z cpu2:33204) ScsiDeviceIO: 7419: get VPD 83 inquiry for device "mpx.vmhba0:C0:T0:L0" from Plugin "NMP" failed. Not supported

    (2014 04-22 T 19: 57:07.520Z cpu2:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "mpx.vmhba0:C0:T0:L0" from Plugin "NMP" failed. Not supported

    (2014 04-22 T 19: 57:07.520Z cpu2:33204) ScsiDeviceIO: 6169: QErr setting for mpx.vmhba0:C0:T0:L0 unit could not detect. Way to not found error.

    (2014 04-22 T 19: 57:07.520Z cpu3:33204) ScsiDevice: 3443: device successfully registered "mpx.vmhba0:C0:T0:L0" from plugin "NMP" of type 5

    (2014 04-22 T 19: 57:07.521Z cpu4:33366) usb-storage: detected SCSI revision number 6 on vmhba32

    (2014 04-22 T 19: 57:07.521Z cpu4:33366) usb-storage: correction of the survey data to change the revision number of the SCSI 6 to 2 on vmhba32

    (2014 04-22 T 19: 57:07.521Z cpu4:33366) usb-storage: correction of the survey data to change removable media, bit of 'stop' on 'on' on vmhba32

    (2014 04-22 T 19: 57:13.043Z cpu3:32792) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.5005076c07bfe279' of device NMP doubt; asked the State of the fast path update...

    (2014 04-22 T 19: 57:13.043Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e80898f40) 0x1a, CmdSN 0xd0 world 0-dev 'naa.5005076c07bfe279' has no data of sense H:0 x 7 D:0 x 0 x 0 possible P:0: 0x5 0x20 0x0.

    (2014 04-22 T 19: 57:13.081Z cpu3:32792) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.5005076c07bfe27b' of device NMP doubt; asked the State of the fast path update...

    (2014 04-22 T 19: 57:13.081Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e80898f40) 0x1a, CmdSN 0xd1 world 0-dev 'naa.5005076c07bfe27b' has no data of sense H:0 x 7 D:0 x 0 x 0 possible P:0: 0x5 0x20 0x0.

    (2014 04-22 T 19: 57:13.123Z cpu2:33204) LVM: 8355: mpx.vmhba1:C0:T1:L0:1 detected device can be a snapshot:

    (2014 04-22 T 19: 57:13.123Z cpu2:33204) LVM: 8362: questioned disc ID: type 1, len 14, lun 0, devType 0, scsi 0, h (id) 16746273972281211240 >

    (2014 04-22 T 19: 57:13.123Z cpu2:33204) LVM: 8369: ID of the disk drive: type 0, len 10, lun 0, devType 0, scsi 0, h (id) 1308713170419776745 >

    (2014 04-22 T 19: 57:13.124Z cpu2:33204) LVM: 8355: mpx.vmhba1:C0:T0:L0:1 detected device can be a snapshot:

    (2014 04-22 T 19: 57:13.124Z cpu2:33204) LVM: 8362: questioned disc ID: type 1, len 14, lun 0, devType 0, scsi 0, h (id) 15010766293529110797 >

    (2014 04-22 T 19: 57:13.124Z cpu2:33204) LVM: 8369: ID of the disk drive: type 0, len 10, lun 0, devType 0, scsi 0, h (id) 13427631733060988540 >

    (2014 04-22 T 19: 57:13.131Z cpu2:33204) SFS: 5092: pilot no. FS claimed device 'mpx.vmhba0:C0:T0:L0': unsupported

    (2014 04-22 T 19: 57:13.155Z cpu2:33204) Vol3: 714: could not read the header of control volume: unsupported

    (2014 04-22 T 19: 57:13.155Z cpu2:33204) Vol3: 714: could not read the header of control volume: unsupported

    (2014 04-22 T 19: 57:13.155Z cpu2:33204) SFS: 5092: pilot no. FS claimed "on the remote control": unsupported

    (2014 04-22 T 19: 57:13.202Z cpu2:33204) VC: 2059: device rescan time 101 msec (total number of 5 devices)

    (2014 04-22 T 19: 57:13.202Z cpu2:33204) VC: 2062: Filesystem probe time 70 msec (devices surveyed 5 on 5)

    (2014 04-22 T 19: 57:13.202Z cpu2:33204) VC: 2064: refresh the open volume time 0 msec

    (2014 04-22 T 19: 57:14.826Z cpu3:32851) LVM: 13089: one or more LVM devices have been discovered.

    Commissioning services2014-04 - 22 T 19: 57:16.014Z cpu0:32895) Tcpip_Vmk: 123: nd6_rs_timer: no router on 'vmk0 '. Waive

    (2014 04-22 T 19: 57:16.531Z cpu1:33651) VisorFSRam: 634: vsantraces with (0,300,0,0,755)

    (2014 04-22 T 19: 57:16.531Z cpu1:33651) SFS: 6895: mounting fs visorfs (4108aa584010) with o 0,300,0,0,1,0755, vsantraces on 4108af971220 file descriptor

    Possible the syslog.log entries

    2014 04-15 T 04: 50:20Z jumpstart: storage Info: unable to volume VMFS Mount with the UUID 522a475e-80e96251-5f62-00215e4e123e. SysInfo error on return operation State: County of parameter not valid. See the VMkernel detailed error information log

    2014 04-15 T 04: 50:20Z jumpstart: storage Info: unable to volume VMFS Mount with the UUID 522 a 4783-5bbdaecf-9237-00215e4e123e. SysInfo error on return operation State: County of parameter not valid. See the VMkernel detailed error information log

    Someone at - it useful ideas?

    Thank you!

    Either you have to will the volumes - or clean all paths dead in your esx.conf

  • Crack suddenly / audio distortion via USB interface

    Hello

    I use an iMac of retina end of 2015, which is connected to a USB AG06 Yamaha interface. The interface provides an audio output to my studio monitors.

    For these months, audio works flawless, but all of a sudden yesterday things got ugly. Briefly the sound works (often less than 30 seconds) then crackling / distortion occurs, causing finally audio fade out and back in. The problem is temporarily resolved if I disable the interface and turn it back on. I have not changed the settings or installed new applications - the question is just appeared from nowhere.

    Initially, I assumed that it was the fault of the USB interface, but I tested it on another Mac and it works without any problem. I tried to restart, stop, uninstall all additional audio devices, and disconnect all other USB devices, but the problem is still there. I tried other USB devices, including a Schiit Audio USB DAC on the iMac even, and it also works without any problem.

    Any idea is appreciated!

    Thank you.

    all USB audio devices act the role of being a card usb external audio such always needs a driver, don't know if there are any drivers for the card generic usb audio if I was you, then I go to yamaha and look for an osx for your version of driver for their product

    Apple do not have drivers for hardware devices of third party if included in osx, then it is because the developers of hardware committed a pilot tested and improved Apple and became part of the osx installation

    If a new version of Mac OS x is installed, and yamaha has not committed a driver or the same clerk driver than the last time and he could not test it because it displays the questions you experiences in some cases, and you are upgrading, then there is no new yamaha rider so your system just stick to previous driver

  • Update via subject: Firefox after the release date

    I noticed that in the latest versions of 4-6, after the official release date (for example today Firefox 38.0 was moved to release and pushed to free servers and for manual download on the site) as the day coming on: firefox does not update the program and said I use the latest version (37.0.2).

    Is there a reason for this?

    My guess: version stable/Adaptive QA in the case of a major bug
    -Tire due to an uncorrected critical vulnerability
    -Not overwhelming the server load
    -Help organizations deployment of delay of 1 day instead of trying to push several critical supplier updates every 2nd Tuesday of the month.

    I bet on the top 2 reasons.

    More information available on the subsequent restitution process after the release date? Is there a period of 1 to 2 days before the additional downloads are allowed via the built-in updater?

    • I read the timing of the release, but after the next day of the release date, there is no additional info provided

    Thank you in advance!

    fired 38 of Firefox version and updates are disabled for the time being to investigate and resolve some crashes on Windows and a version of Firefox 38.0.1 is underway and will be published in the next few days.

    You can continue to use Firefox 37.0.2 for now.

Maybe you are looking for