Crack suddenly / audio distortion via USB interface

Similar Questions

• Connect Sansa e250 to my audio devices via USB

  Hello

  Connect my sansa e250 to my Denon amp via USB only pieces of audio file of fixed drive will not play anything micro sd expansion port why? Using the sansa E250 01 software
  I would like to say good quality is achieved via USB and I can use the Denon remote

  When the sansa e250 USB connection port denon amp using rock box will not work
  Let's get only by jack stereo 1/4″ but will play music mm two disks

  Help

  Hello
   
  Yes, I should of said unit Sansa MSC mode, if I put in the MPT mode denon amp will not read the sansa e250 arrives with disconnection.
  I know that's not very common. I just bought a sansa fuse with more memory, but I was just wondering if there is any way to be able to have access to the micro SD and card.
  Thanks for the reply.
  Terry

• iOS 9.2 audio distortion on Lightening to USB (scrambled or skip/search as noise)

  As a result of this thread: iOS 9 lightening to POPS and clicks audio USB

  SITUATION
  iPhone 6 s more, iOS 9.2, Opel Ampera/Chevrolet Volt, Original Apple Lightning-USB cable

  QUESTION
  -Stuttering and seek/skip like sounds - audio distortion will occur during playback of audio files on a lightning to USB connection. The question of anywhere between 3 and 15 minutes in an audio file or the track. The question will arise only when the phone is locked.

  REPRODUCTION

  1. read audio for a long time (> 5 minutes) on an iPhone LOCKED running iOS 9.2 and wait for the audio distortion.

  2. once the problem occurs, UNLOCK the phone and the issue will be settled immediately.

  2B. pause playback and wait about 5 to 10 seconds until that play again will also solve the problem temporarily.

  3. once the phone is LOCKED again (stop automatic or manual) the question will return immediately.

  NOTES
  The question can be heard mainly using brackets of spoken. The issue will occur with the music, but because of the strong momentum may have certain types of music, the question might be less visible.

  If you have something similair, thanks for posting your results in this topic.

  + 1

  2011 Saab 9-5, 6 s, iPhone iOS 9.2, Apple music

• Sound suddenly does not work but the bars audio always in movement. Windows 7 audio driver: VIA High Definition Audio

  I turned on my pc and tried not to watch a YouTube video when I realized there is no sound playing. I tried to play a video file saved on my pc, still no sound. tried an mp3 player and still no sound. everything worked very well 24 hours earlier. the green bar on the sound in the status bar icon moves when I play something, but I can't just release anything.

  motherboard: ASROCK N68C-S UCC
  audio driver: VIA High Definition Audio
  Windows 7 latest updates installed.

  I have spent 10 hours reading all over the internet and have done the usual troubleshooting:

  • system restore
  • Driver update (from disk as well as site)
  • try different audio jacks
  • using different external speakers
  • playback enabled devices
  • System speaker levels are full
  • active volume equalizer
  • used Microsoft Fix it Audio Playback, which is no problem
  • Run the audio Troubleshooter in Control Panel, no problem found

  I even reformatted and reinstalled windows, hoping it would be like, but it was useless because I still have no sound.

  can someone please help me find a fix for this.
  If a system format has not fixed the problem, im only left thinking that its edge is completely dead and I need a new sound card?

  Hello

  I imagine the inconvenience that you are experiencing.

  I suggest you refer to the section 'I tried all solutions here and still can get my sound to work correctly ' from the link:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Control external synth MIDI via USB keyboard controller

  Friends,

  I'm trying to get a Novation Launchkey 25 to work as an external controller for mother-32 MOOG synthesizer.

  Software - Logic Pro 9

  USB - LaunchKey 25 Novation keyboard controller

  Interface - Focusrite Scarlett 18I6

  MacBook pro with current operating system

  Currently I have the out of the Focusrite and towards the MOOG MIDI cable. The Launchkey is connected via USB on my Mac. Logic can see the keyboard and interface, but not the MOOG. I just want to control the MOOG mother 32 with the keys. I am at a loss on how to implement the logic. Any help would be greatly appreciated.

  Thank you

  Steve

  1 MIDI OUT of the Focusrite at noon on the MOOG.

  2. create an external MIDI track with the release (in the Inspector) on the MIDI OUTPUT Focusrite. Also assign the desired MIDI (or ALL) channel. Better, the use of the channel the MOOG is set up to receive on.

  3 connect the headphones to the MOOG, to see if it is audio output. To get the audio MOOG through logic, you should run the audio Moog in the Scarlett outputs, create an Audio track, the value of channel inputs inputs use the MOOG, the value Preferences / Audio monitoring software allowed to logic. Allow recording the audio track. You can select two tracks (Audio and MIDI external) using shift/select, if necessary. Audio will come from Scarlett.

  It is another way to analyze using a plugin, get that first day.

• Satellite Pro L20 goes wrong with i.f. audio Fast Track USB

  Hello!

  I used my Fast Track USB on new Toshiba Satellite L40 and I never had any problems with it. I could put a low latency and I did a few songs with him.

  Yesterday, I bought another laptop, thinking of recording studio at home. He used the Toshiba Satellite Pro L20. It does not work with my interface. When I listen to music on Winamp or anything on Fruity Loops, I hear strong clicks, pop, noise. They introduce samples, or they appear during playback, or after a sample is stopped.

  I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba more? The only chipset drivers are old, and you can download em only from site Web from Toshiba. The chipset is ATI Xpress 200 M. Its pilots are with the graphics card. Recently I noticed that you can download "ATI Catalyst Legacy Display Driver for Windows XP - card mother/IGP Drivers 9.11" and CRACK to make it possible to install on a mobile device like the L20. Yep it's funny, but its impossible to do otherwise!

  things that I have tried and they have still not help:
  replacement of drivers #, original were released in 2004. I installed the version.
  driver settings #, low latency, high latency
  # asio and different settings
  pluging # USB interface to another.
  # try what happens when I use the battery and when to use the adapter
  # update BIOS
  # off units such as wifi, card sound card on board
  # checked IRQ list

  persistent organic pollutants will always appear.

  my config:

  Toshiba Satellite Pro L20
  Win XP Home SP3
  Celeron M 1, 5 GHz
  896 MB of ram
  M - Audio Fast Track USB, drivers: 6.0.2

  Kind regards

  Initially, I wonder that you use old notebook L20 now. You have no more L40?

  You must understand that the Satellite Pro L20 is older model laptop and also not the best choice for such operations. This laptop is probably designed for simpler day-to-day operations such as the internet, e-mail, office, a little bit of multimedia and that s all the.

  I don't mean good old classic doesn't work with your external device, but you will be lucky if someone has the same external device and the same model of laptop and write about their own experiences.

  Do you use factory settings or you have installed the own operating system?

• Xperia Z3 (D6603) can not suddenly load/synchronization via Windows 10 Desktop/Xperia companion/Media Go

  Hello, I hope someone can help me to ...

  I was fortunately charge/sync my Xperia Z3 (D6603) with my computers desktop and laptop Windows 10, using Xperia companion and Media Go through the cable USB of Sony for the best part of two years. My Z3 can be recharged using the ankle of the socket and the USB cable.

  I continue to be able to do the above with my laptop Windows 10. However, my desktop Windows 10 pc suddenly shows missing or errors of driver corrupted in Device Manager when I connect my Z3 via cable USB Sony - and any other USB cable I've tried. I can't load or synchronize my Z3 with the USB cable provided or any other cable via my desktop Wondows 10 pc.

  Here is a list of the efforts I made to fix this desktop pc driver:

  1. downloaded Xperia Z3 drivers of developer.sonymobile.com/downloads/drivers and tried to install these using the procedure "Add legacy hardware" in Device Manager. The result is as follows:

  Entry 'sa0111 Sony - Sony sa0111 ADB Interface Driver' Device Manager with yellow exclamation point triangle

  With Xperia Z3 attached via USB and powerful device - Action - Scan for changes on the hardware Manager, there is a subsequent Device Manager entry ' other devices - unknown device.

  2. restart Windows 10 desktop pc with Xperia Z3 still connected via USB results in same as Device Manager entries above.

  3. hardware error codes received Windows are:

  Code 19 - Windows cannot start this hardware device because its configuration (in the registry) information are incomplete

  or damaged.

  Code 18 - reinstall the drivers for this device

  Code 28 - the drivers for this device are not installed. A section of installation of service in this INF is invalid.

  Code 10 - this device cannot start

  4. Uninstall and reinstall the drivers in Device Manager

  5 uninstall Xperia Companion - restart the desktop Windows 10 pc - reinstall Xperia companion

  From what I've been able to grasp, my problem is certainly desktop on pc (computer pc laptop continues to work like in a dream) and I'm now ideas for moving forward with.

  A Question - is it Sony software available for download, which I can run that exercise would eliminate any trace of pilots Z3 Xperia, Xperia companion and Media Go to my desktop pc so that I can start again "from the new"?

  and...

  Does anyone have suggestions/solutions Can I implement to restore the charging/sync features using my Windows 10 pc?

  With my thanks in advance for your consideration and the entrance,.

  johndoc37

  Hello NeoBaum,

  I solved my problem... turns out to be a matter of simple to reinstall the drivers of PSG.

  I found the following article told me exactly what to do.

  http://www.howtogeek.com/195607/how-to-get-your-Android-device-to-show-up-in-file-Explorer-if-it-isn...

  See you soon

  johndoc37

• {A} line recording via USB

  I have a N411z with a Conexant sound card.  I've updated to 8.54.45.0, A04.  Can I get this card to recognize an audio source via a USB port?

  Something like this audio interface Behringer will work.

  Here is an another Behringer interface that is very similar, but it includes a phono preamp built if you want to eliminate your preamp - one less device to connect.

• stereo recording via USB connection?

  Hi all

  I'm a newbie on the audio recording and have what may be a stupid question.  Is there anyway to use two USB microphones for stereo recording via the interface USB (using two USB ports?) in Audacity?

  I have a Mac Mini with OSX 10.11.4 and use Audacity CS6.

  Thank you

  Kevin H.

  kjhart0133 wrote:

  Hi all

  I'm a newbie on the audio recording and have what may be a stupid question. Is there anyway to use two USB microphones for stereo recording via the interface USB (using two USB ports?) in Audacity?

  Audacity? Do you mean the hearing?

  I think you'll have a little difficulty to do this anyway, as the clocks of scanning in the pickups will not be synchronized. Which means that even if you can get two of them work, elimination will be in every sense. You can persuade two microphones to work at the same time without too much difficulty, but this only works if you have two independent sources that do not have to have any kind of relationship of phase, and it is the relationship of phase which actually do stereo work.

  There is, as far as I know, only decent stereo micro USB, and the Tricapsule Yeti, one blue. It crosses all phase problems in having everything digitized by the only encoder, so all the problems of phase are sorted completely.

• Speakers for iMac via USB Dongle

  So, I bought a USB 3.5 mm dongle so that I could connect the external Boston CR6 speakers to my iMac. I get sound but it is pretty low. The volume level is the same if I plug the 3.5 mm plug into the hole in the back of the iMac.

  I think it is a difference of impedance, or the iMac does not have enough juice to power the speakers (which are actually very small).

  Is there anyone driving experience of the external speakers, via USB or directly via the 3.5 mm to 3.5 mm port? I will order a small amp if that's the problem?

  Maybe audio HDMI or optical has more power? I don't see a spec (which I understand).

  10.11.6 running.

  Thank you.

  FWIW, most if not all sound cards were never intended to push the non-powered speakers. That's why most of the 'computer' speakers are powered. You will need amplification of some sort.

• Satellite L30: Connection to a printer via USB Windows XP

  Hi all

  I'm trying to connect my printer (Brother MFC 9070) to my Satellite L30 and it does not work. Can I use the USB interface to connect the printer to the laptop under XP? I've read that USB can be used to connect the printer to Mac OS, but if not, how should I connect the printer as good old parallel interfaces do not exist on the new mobile no more? Who can help?

  Thank you!
  Dieter

  Hello

  Please check this similar topic about connecting printer parallel to the computer via the USB interface.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17425

  In this topic, Jeffrey suggested that it s a good idea to test the USB-parallel adapter > before buying because not each adapter will not work.

• How to make my computer send all audio data via an optical audio cable instead of making headphones?

  Howdy,

  To listen to the radio online or CD played from my computer, I used to connect the computer to my entertainment system at home since the headphone jack of the computer to the port on my home entertainment system.

  Now, I wanted to get a better sound and bought the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the system entertainmeny home via digital cable optical, rather than by the headphone. If I just disconnect the cable between the headphone and the port to THE and have only the PC and the system connected with the optical audio cable, I can't hear any sound. I suspect that the computer is not sending the data through the optical audio port. I'm not able to figure out how I can adjust the settings on my computer so that, from now on, all sounds are emitted through the optical audio.

  (1) I want to do it especially for my desktop HP (configuration below) and advice on how to do this would be appreciated.

  (2) I also have a HP laptop (configuration below) and I was wondering if this would be feasible too (even if she does not have an audio output, but it has an HDMI output - you can convert audio optical?)

  Thanks in advance!

  My office is:

  WANT to h8xt,
  • Windows 8 64
  • 3rd generation Intel (r) Core processor quad-core i7-3770 [3.4 GHz, 8 MB of shared cache]
  • 12GB DDR3 1333 MHz SDRAM [3 DIMMS]
  • 1 TB 7200 RPM SATA hard drive
  • No secondary hard drive
  • 1 GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
  • 300W power supply
  • DVD SuperMulti burner
  • LAN wireless-N (1 x 1) card
  • 15-in-1 reader cards, 2 USB 2.0 (front), 2 USB 3.0 (top)
  • No additional desktop software
  • No additional security software
  • No TV Tuner
  • Beats Audio (tm) - a built-in studio quality sound
  • HP USB volume control keyboard and mouse with Win 8 keyboard
  • Adobe Premiere Elements and Photoshop Elements 10

  And the laptop:

  HP ENVY 15t Quad

  Hello @_goma,.

  Welcome to the HP Forums, I hope you enjoy your experience!

  I read your post about how you want to send all the audio data via an optical audio cable instead of the headphone jack of your computer, and I'd be happy to help you in this case!

  To configure your desktop computer to activate the optical audio cable, I advise you to follow the steps below:

  Step 1. Click on the button of the Windows key on your desktop

  Step 2. Type "Control Panel."

  Step 3. Select "Control Panel" in the upper right corner

  Step 4. Select sound

  Step 5. On the Read tab, right click on the white box under available devices

  Step 6. Select "Show disabled" and "show disconnected devices".

  Step 7. Connect your Audio optical cable

  Step 8. Select your cable Audio perspective as the default device, and click 'enable '.

  Because it is not possible to convert the audio output HDMI output on your laptop, it is regrettable that the laptop is not able to connect with an optical audio cable.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• DCR-TRV260 NTSC via USB for Windows XP Home edition home

  Hello!

  I'm trying to help a friend to connect its DCR-TRV260 NTSC to his computer HP Vectra VL420 (Yes, a very old machine).
  The computer is HP P/n: PS660AV #246, with a processor Pentium 4 (Willamette) of 478mPGA socket @1. 70 GHz, installed on a HP
  card system with an Intel i845 NB A05 and and Intel 82801 SB, the latter is, I suspect, the culprit.
  We lack a clean new install of Windows XP Edition family with Service Pack 3, with 384 MB of PC133 SDRAM.
  I know it's something Museum but hey, it works and it can not even buy a more recent machine.

  The problem: I can't do the camera be considered a via USB removable storage device, in order to download still images on the computer, he recorded on tape, not a stick of memory, there no card IEEE1394 and no budget to buy a.
  I installed the software included in his CD that comes with the camera, and I can work
  streaming USB tool and watch motion pictures and still images through it, but I can not D/L to the computer.
  I removed all the foregoing, as well as all instances of the camera Device Manager, then set up PMB56_installer1108a, to my dismay, because he wants to only use IEEE1394 (I understand why, but it should offer the USB option).

  How we manage to always download these images, recorded on tape, on his computer?
  I suspect the Intel 82801 SB is at fault, because even if it does not detect the camera and every time I plug it, Device Manager
  updated to reflect the three instances related to the camera, the Sony imaging device, digital video USB Composite and Audio USB
  Device, it cannot be seen as a removable storage device.

  Of course, I read the manual for the camera and the computer application s/w, but I can't find anything related, none of the people
  two elements indicate how do what my friend waiting!

  I read all the messages mentioning USB as a search term, and the question is: is WXP just incapable of such a feat?

  Help, please.

  Hello!
  After all this time, I discovered the answer to watch me on page 25 of the PDF manual camera operations.
  They are not always photos within the meaning of the word "cybershot", they are
  still images recorded with sound, then it's just a frozen video image recording with
  seven seconds of audio.

  Now we have captured it with Windows Movie Maker and export it somehow to jpg still images.

  Thanks anyway!
  (Someone has already read the post?)

• Unable to remote control Tektronix TBS1062 with USB Interface

  Hello

  I recently downloaded IVI Driver for Tektronix TBS1062 of national instruments.  I use the USB communication. I have configured the instrument NI Max and can identify the instrument successfully. However I'm unable to use other functions using the driver of the IVI. Stage of IVI to NI TestStand always runs without error and Trace of e/s OR watch VI_SUCCESS but I don't see any channels settings horizontal scaling and scale veritical configured by the IVI step. The horizontal and vertical scales are always the same.

  I'm not really sure, but would it be because of the USB interface? The driver supports USB?

  Anyone have the same mistake or could someone please help solve this problem.

  Thank you very much

  First thing I would do, is to ensure that the instrument is configured correctly to accept orders via the USB.

  After that, try to send commands through MAX to see if the range reacts.

  Make sure that you are not using a simulated IVI session.

• HP LaserJet MFP M425dw 400 pro: cannot connect to the printer via USB

  Hello

  My problem is as follows:

  Since December 2014, the HP printer has been connected via USB to the desktop (at the time using windows 8.1) and by the network to other computers. The problem is with the 10 windows desktop where it is widely used for double-sided scanning.

  Yesterday morning I came only to find out that HP will not work in no case with Office for Windows 10 USB - connected, changed the ports that are 6, the cables, the office will say it is not connected. However, it connects through network for printing but not scan, it gives an error about Scanner HP not connected but will scan with Windows Scanner and fax with the printer using the scanner for the work of network folder - which can not scan two-sided.

  I uninstalled the driver, reinstalled with HP Support Assistant / downloaded directly from HP, same thing. The problem is that it be increased to 99% on the screen that shows the connection to the printer (the one detecting the USB cable) when it will say:

  "

  Error

  A Setup operation took too long to run. It is a fatal error, preventing the use of the product.

  If please restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. »

  I tried the original shipped with the printer CD, it gives the same error message.

  If anyone can help I will be very grateful. Thank you!

  Too bad! Fixed it myself using the Hp Smart Install supplied with the network interface of the printer.