OS is crashed-tried restore out-of-partition error message of disk-not during this process, now windows will not load

Similar Questions

• I resized the Partition Mac to make more space for BootCamp and now Windows will not boot

  On a collague MacBook Air running 10.11.4, we used disk utility to reduce the Mac Partition so that we could then use a Windows tool to extend the BootCamp partition. However, upon restart, we got a BACK screen with the error that Windows cannot start because it cannot find the boot device.

  Help, please?

  This is not a mechanism supported by Apple to change the size of the Windows partition. Apple supports the remove/reinstall only.

  We try to remedy. Please after the release of the following OSX Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  What is the model/year of the MBA? Please, do not post the serial number of your Mac. Orders 'sudo' will ask for your password.

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  Hello grandpa_bill,

  Thank you for your participation in the communities of Support from Apple.

  If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.

  For more information, see get help using iCloud for Windows.

  All the best.

• 'out of paper' error message and there is paper in the printer

  I have a HP 1610 printer/Scanner with an "out of paper" error message  I installed a new cartridge, a few days ago, and the printer ask me to align the cartridge.  When I press 'OK' I get the error message "out or paper.

  I loaded and re-load of paper, checked the back door for a paper jam and still get the same error message.

  I removed and replaced the cartridge but nothing seems to work.

  I'd appreciate any help!

  Thank you.

  Hello bstew4447,

  Please follow the link below to troubleshoot the out of paper issue.

  No more paper

  Kind regards
  Jabzi
  
  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give a Kudos!
  I work for HP

• Vista won't go dormant and error related volmgr (could not load the crash dump driver)

  Hi all

  
  

  I've been using Vista for a couple of years and for some reason any yesterday he began to refuse to go to sleep.  I did not any changes to the system or ran updates until this happened (I'm not on Sp2, just under the security updates every now and then).  I checked the Device Manager to see if the network card has been to reactivate, but this was not the case; I also disabled the mouse of this awakening, and that did not help either.  I told him to go to sleep, and he wakes just in 1 to 5 seconds.  I checked event viewer and noticed that whenever I put him to sleep, I get volmgr error: "the system could not sucessfully load the crash dump driver.  Going back through the events, this error has not appeared before, so I guess that it is connected to the computer doesn't go to sleep.  Any help would be appreciated, thanks!

  Here are the details of the error:

  
  

  -

  -

   

    45

    2

    0

    0 x 80000000000000

   

    152547

    System

    Sebastian-PC

   

   

  -

    \Device\HarddiskVolume3

    0000000001000000000000002D0004C004200000430000C000000000000000000000000000000000

   

   

  Hi Sebas-82,

  I suggest that you update the driver for graphics card on the computer and check if it works.

  How to upgrade the graphics card on the machine driver
  
  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on the graphics cards to develop.
  4. under display adapters, double-click the entry for your graphics cards, and then click the driver tab.
  5. click on Update driver software.
  6. follow the Wizard update driver to update the driver graphics cards.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If updating the driver fails, then uninstall and reinstall the latest driver for the video card by downloading from the website of the manufacturer of the system.

  Also see the Microsoft kb article below.
  Windows Server 2008 or Windows Vista Service Pack 1 - systems do not generate a dump file if the system partition is a mirrored volume
  http://support.Microsoft.com/kb/958933

  If the previous step fails, then you need to update the motherboard chipset drivers by contacting the manufacturer of the computer.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Photosmart B8550 printer Out Of Paper error message

  I have a HP Photosmart B8550 who insists on the fact that I'm paper little matter how much is in the main tray.  Whenever I try to print from my computer or just running test page, I get the error message "Out of Paper".   This problem occurred about two weeks after the expiration of the warranty of the printer.

  The last thing that he print with success was a sign of sale on fluorescent stock heavy.  I tried cleaning the rollers as others suggested online and found a few red residue, probably from the sign.  It does not have the printer works however.

  Someone else suggested to remove the upper plate and forcing a piece of paper through by hand to get it going again.  If I push a sheet of paper upward to meet the internal reels view and print a single page but it does not take any other paper on its own.  It just goes back to what the message OF PAPER.

  How is the document that is supposed to be pulled up to the rolls? Now that the top plate has been removed, I see an arm with two black rolls down on paper when PRINTING is affected, but they do not seem to turn. They just sit there for a few seconds and then back up just before ON PAPER will start to blink.

  Any suggestion or destroyed independent feeding mechanism? Is there maybe a sensor that is clogged?  If Yes, where is it located and how can it be cleaned?

  There is a document to find errors on paper on Photosmart 8000 series printers located here.

  If these steps do not fix the problem, then a hardware problem has developed in the feeding mechanism and your best option will be to replace the printer. Have you thought about contacting HP Support on the upgrade program?

• BlackBerry Smartphones blackBerry AppWorld comes out with an error message and even that the account of Blackberry ID (inaccessible)

  Hello!! Appworld does not open. Instead it will show an error message (it is a problem with the current Session. Please sign in to continue. Error ID: 30702). While the Blackeberry I intend to come out of this message (unable to update your Blackberry ID account information). I use a blackberry Torch 9810 with 7.0 on this OS. Please, what can be done to remedy this disorder. COS I already tried to uninstall the software and reinstalled again still with no positive results.
  P.S: it works fine before. The blackout began about 3 weeks ago.
  Thank you

  Hello

  Here's a knockout who deals with these errors:

  • KB28212 "Unable to connect to your BlackBerry ID account" or "Impossible to update your BlackBerry ID account information" error occurs on a BlackBerry smartphone running BlackBerry 7

  I hope that it contains something useful! There are also several existing threads on this site, which discuss that exact error... your opinion of those who may prove useful, and a search of this site, by using the code, or an error message should reveal all the existing threads that are applicable to you.

  Good luck and let us know!

• my system restore gives me an error message, I'm ready to just do a factory restore, but it will not accomplish the restoration for some reason any!

  I did somehow something wrong and all seeking a srnt file for me through my business network that I managed to sync all my files via Adobe reader that supports only those of the doc and therefore prevents me to open any file or program etc. of my application files.  I am at my wits end I need to this computer, I'm in the middle of the tender of work and my spec and plans are those files and also my full runs super slow or not at all, nothing wants to establish a connection - my home page, my Web browser is just nothing is right, so I just want to go back to the box start. HEPL!

  Hi stephen almond,.

  Thanks for posting that query you in Microsoft Communities. You are not able to perform the system restore. Provide the following information:

  ·         What version of the operating system is installed on the computer?

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Work on a domain?

  Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Answer with the information required to help more.

  Thank you.

• trying to loadin my facebook in goole account does not load

  I am trying to load my facebook account on goole.com does not load

  Are the only websites from loading correctly?

  It's a problem with Facebook alone?

  You see an error or a warning message?

  Try to disconnect from the internet and reconnect again"

  Delete internet browsing history

  Contact your Internet service provider

• Crash when updates at shutdown lead Error message 'one of the files in the registry database had to be recovered by use of one newspaper or another copy. Recovery succeeded. »

  Yesterday, I was using my laptop at the farm level is critical. When I stopped him, 9 updates began to occur when closing. Unfortunately, the laptop ran out of battery before that update has been completed. When I rebooted the professional windows xp, an error message "one of the files in the registry database had to be recovered by use of one newspaper or another copy. Recovery succeeded. "came and this message constantly comes up whenever I start windows. I have no CD with me as the operating system has been installed by the IT Department of my employer and I do not want to reinstall windows. I do not know how to change, and then make the changes in the registry via regedit. If anyone know to solve this problem, I would appreciate your help. I never wait for windows updates could cause such problems.

  Hello

  • Your computer is on the field?
  If it is connected to a domain, then you can post your query in this link:
  http://social.technet.Microsoft.com/forums/en-us/categories
   
  If it is not then what is the error message in the history of the magazine update on the windows update site?

  See also fix it for windows updates.

  http://support.Microsoft.com/mats/windows_update/

   

• Get the error message "Invalid stem Pipe" during the execution of the restore

  Original title: invalid stem tube

  Am not able to restore to another point, because it tells me that the stem of the pipe is not valid

  Hello

  
  1. What is the brand and model of the computer?
  2 are you getting this error message when running system restore or factory restore?
  
  Reply with answers to help you in a better way.
  
   
  Hope this information helps.

• My computer was not restart and I did a restore of the factory system, and it would not load the new screen?

  My computer has been restarted not and I have to click the button 3 or 4 times just so he can work. I use it for school so I really need to work and so I did the system back restore to the factory settings and it did again when the screen would not load but now it works. I left it only after I did 8 hours? that is the problem or do I do it again? I mean restoration?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if you can doot:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• DeskJet 5610: 5610 Deskjet driver came out prematurelly without error message

  I was running aio_cdb_nonnet_full_win_ww_130_141.exe downloaded from the HP web site.

  But at half way through the installation itself abandoned without error message.

  He came out after I clicked on accept and continue.

  Hello

  Follow the installation once more until you reach the EULA screen, then click on the 2nd link (the use of Internet connection settings).

  Select No, thank you for all the options and confirm the license agreement.

  The additional installation and check for the difference.

  Shlomi

• Tried running Photoshop, got an ' error: message 16'

  I am under Photoshop CS6 (64-bit) on Windows 7.

  Yesterday, I tried running Photoshop and got a message "error: 16", telling me to re - install. I checked a few messages on here and elsewhere, and it seems that reinstall doesn't seem to work for most people anyway. I am also reluctant to do as I have parameters and brushes on Pshop I really don't want to lose!

  Then, because she seems to be a problem with the permissions, I followed a few virtual tours (like this Error Configuration 16 |) CC, CS ) but they have had no success. Please can someone help me with this? I can't waste any more time, and Photoshop is at the heart of my work!

  Any help is welcome!

  TL:Dr: I tried this Configuration 16 error | CC, CS to fix error: 16, but no luck...

  
  

  
  

  Hi deepakg1988

  Well, in the frame to find folders presets, etc, I decided just try "run as Administrator" from the shortcut in the folder in Program Files Adobe. It worked! Remains to be seen if she continues to work, but I'm passing all!

  Thank you for your help - if it blocks / stops working, so I'll follow your instructions for a clean reinstall (took me ages to find the PS disc!)

  Thanks again