OSB, communication between the 2 operations of the same WSDL file

Similar Questions

• No communication between the Bluetooth SD - BT2 and PocketPC SD card

  I use an SD - BT2 (PA3271U) card in a Microsoft Pocket PC (also referred to as 'Microsoft PocketPC 2003') 4.20.00. I use the latest driver Toshiba 5.01 C and the card is recognized by the Pocket PC (Medion MD 95450 / MDPPC 150). I can connect to my mobile phone and GPRS connection is accumulation with no problems.

  But later at this point in time, the connection is established but dead... no connection to anyone. It seems that the communication between the Pocket PC and the card SD - BT2 is broken on the software side.

  Anyone have an idea (or a working driver) for this problem?

  Thanks in advance

  Karl

  Hello

  Have you tried to reinstall the drivers or software for SD - BT2?
  In my opinion, you should check this option.
  Also, I found a brand new version for PDA Bluetooth Stack (Bluetooth software and drivers).
  Check out this site.
  http://APS.toshiba-tro.de/Bluetooth/pages/download.php.

  Good bye

• No communication between the printer and the Red computer on switch flashing printer does on every time I turn it off

  I get a message there is no communication between the printer and the computer. Printer is all-in-one HP Officejet 4315v. Have uninstalled and reinstall the software and unplug the USB port and plug it back. Repeated several times. Still no communication. Exclamation red light next to 'on' and green button 'on' butter is flashing all the time.

  You have a hardware failure of the printer.  Contact the manufacturer for support.

• Encrypted L3 Communications between the TOWER and WLC?

  Hi all

  I work with a client who wants to put the towers away to their WLC (a 4402). The problem is that communications between the TOWER and WLC must be secured, even through their private Wan! I have a few questions that result, if someone is able to help you;

  1. I can't know if and what method of encryption is (is it AES etc.?) used on connections between towers and the WLC and what are the steps?
     1. The terminology can be a problem here, it's not a wireless mesh, just classic LAP for WLC
  2. EXTENSIVE customer network is already encrypted (IPSec VPN via VPLS) in parts - what is the consequence of execution of AP<-->WLC with end to end (if possible) on a network encryption EXTENDED with IPSec, i.e. double encryption?

  Strange but true - pointers will be greatly appreciated... Phil.C

  With a controller of the 4400 series, the control traffic between the AP and the regulator is already encrypted AES.  The user traffic is not encrypted.  If you use a 5508 controller all traffic between the AP and the controller is encrypted AES.

  For what is running the traffic through a VPN, it should work.  The issue I see with this is with the MTU in general.  The controller will drop all packets with a payload of less than 32bytes data.  According to the MTU over the VPN I've seen packets getting fragmented and it is a question.  If you use one of the versions CAPWAP (5.2 or newer) discovery dynamic MTU is part of the Protocol and this MTU problem does not really exist.

• No communication between the primary and standby

  Hello
  
  I have configured the DG,
  
  primary-> testprod
  standby mode-> testprod_s
  I started, standby machine instance watch with testprod and its place...
  but there is no communication between the primary and standby...
  
  How can I ask/check communication?

  Heartbeat PING [ARC3]: Unable to connect to the day before "testprod_s". Error is 12514

  eve of post form

  status of $lsnrctl
  $lsnrctl services

  When oracle not registered with listener service, this kind of errors occurred.
  The value of register LOCAL_LISTENER & manually as below in sleep mode and post

  SQL > alter the registry system;

• Disable communication between the host and the virtual machine

  I have VM Server 2.0 and one of the virtual machines has the same name as the server and even if the virtual computer is connected to the host only network it generates the Windows error message: duplicate names exist on the network.

  is there a way to disable communication between the host and the virtual machines? I just need a virtual network that is isolated from my network complete and host also.

  Thank you.

  The GUI Server2 is not to choose the other unused vmnets.  Then edit your file VMX use a different vmnet of 0, 1 or 8.  (which are bridged, host-only and NAT)

  Thus, for example, if your VMX has a line that says:

  Ethernet0.VNET = "VMNet0.

  change to:

  Ethernet0.VNET = "VMNet2.

  (This assumes that you have not used the network Editor to fill the vmnet2 either).

• It is possible to switch between mode 'file separate globals' to 'share the same globals file mode' during the test run.

  Hi all

  It is possible to switch between mode 'file separate globals' to 'share the same globals file mode' during the test run.

  Or there is another option to use variables separated and shared at the same time for 2 parallel Sockets (ParallelModel.seq).

  Thank you

  Thank you

  I think it's useful!

• change the spaceing between the lines in files

  How can I change the spaceing between the lines in files

  Hello

  What do you mean exactly by change spacing between lines in files?
  Follow the given link that helps you accomplish the task.
  Change your screen resolution: http://windows.microsoft.com/en-US/windows7/Change-your-screen-resolution
  You can also view: folders: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Folders-frequently-asked-questions
   

• Are the same installation files to Adobe Acrobat Std and Pro?

  are the same installation files to Adobe Acrobat Std and Pro?

  Laughing out loud

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• in Acrobat 8 Standard advanced editing tool is grayed out in Windows 7 and Windows 10 but works with the same pdf file in Windows XP Professional. Why?

  in Acrobat 8 Standard advanced editing tool is grayed out in Windows 7 and Windows 10 but works with the same pdf file in Windows XP Professional. Why?

  Perhaps because Acrobat 8 is not compatible with Windows 7 or 10.

  Friday, October 9, 2015 at 22:11, thosdelaney [email protected]>

• Can I call the same SSI file twice on the same page?

  I called the same include file (form.inc) twice on this page, just below each of the two links "download the printable file.

  It works perfectly for the first instance 'PARTNER Ares & Co', but does not appear in the second case, the "CHIEF MARKETING OFFICER")

  Current research of work & Partners

  I used the exact sam call at both locations

  <!-BEGIN FORM INCLUDE->

  <? php require_once ("form.inc");? >

  <!-END FORM INCLUDE->

  Will very much appreciate your advice.

  Try

• Several plugins using the same JS file dynamic action

  Hello
  
  (Apex 4.0.2)
  
  I created two plugins for dynamic action, say Plugin1 and Plugin2. These two plugins are most of the time used together, so to keep things simple and ease of maintenance that all the JS need to the code specific to each plugin as well as of the common code is in a single file, for example plugins.js. So I download the same JS file to each plugin.
  
  In the generated page, using two plugins the JS file is loaded twice, as planned. Of course, at Apex, they are two different files even if their content is exactly the same.
  
  This is not ideal for me. What is the approach suggested in this case? Always keep the JS separate files for each plugin? And on any common code plugins share, duplicate in each JS file?
  
  Thank you
  Luis

  Hi Luis,.

  apex_javascript.add_library currently does not allow to specify p_key as for example apex_javascript.add_on_load_code is. It automatically calculates the value of 'key' based on the directory and name. I'll add an enhancement request to allow to override this default that will allow both plug-ins use the same 'key' to just load the file once.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• import of comps that reference the same project files without doubling the size of the ae file?

  Hello, I am currently working on a major project that has me constantly to reimport old comps that reference the same project files. The thing is that when I do this AE re-imports all project again files when it is attached to the computer that I imported. My question is is there a (fast) way to remove references of redundant project in the project tab file, or there at - it another way to import a model without creating this double entry in the project tab?

  Thank you guys!

  Sorry, Yes, you can do this by using the command consolidation (file > consolidate all sequences).

  This will remove all duplicates.

  See this Help on AE page for more information.

• Best method of communication between the Application LV

  Hello together,

  I'm looking for the best way of communication between two Applications LabVIEW. As VI is clear, I can use a queue or a global variable and so on.

  But what is the best, when I compile the screw later for DLLs or Applications. So far, we always use the TCP/IP Protocol, but I think that there must be a better way instead.

  So if someone has an idea - he is welcome.

  Thanks in advance

  Markus

  TRAXX wrote:

  What I don't like with TCP/IP you still need a second thread (looped) who manages the TCP/IP communication. I thought that there must be an easier way.

  I also thought that shared variables are always limited to a single application. Thanks for the ideas...

  This second loop is a loop that YOU control. If you go with shared variables you are a slave to what they can or cannot do. In addition, they work over TCP/IP is not out of the picture.

  Its your call.

  Ben

• communication between the printer and the computer stops

  Original title: printer problem

  Without rhyme or reason communication between our computer and the printer just stops (often!)   Why?  and how to fix it?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows