OSPF - stuck in init/drother
I can't get the OSPF adjacency between the GSS and a LDR. Any help is very appreciated.
-of the GSS, the output of 'show ip ospf nei' shows the LDR as a neighbour, but the State is init/drother
-train the LDR, the output of 'show ip ospf nei' shows nothing.
-of the GSS, the output of "debug ip ospf" shows the packets hello being sent and received
-of the LDR, the output of "debug ip ospf" shows packets hello sent, but not received.
-of the GSS, the output of ' debug display interface vNic_1 package - vv "shows the ESG (172.16.254.1) by sending packets hello which include the LDR (172.16.254.2) in the list of neighbor...
-of the GSS, the output of ' debug display interface vNic_2 package - vv "shows to the GSS packets (172.16.254.1) hello incoming, but adjacency is never implemented
Environment:
NSX 6.1.1
Interface internal GSS, the uplink LDR and LDR management are all on the same logical switch.
OSPF: the Protocol address is set LDR IP management and the pass on the address is set to the IP of uplink LDR
Transport area extends to the esxi clusters
> LDR uplink and the management of LDR are all on the same logical switch
Please remove the IP address of the management interface of the DLR...
Tags: VMware
Similar Questions
-
NSX HOL 1603 - OSPF stuck in EchangeStart/DR between 2 WDM router perimeter and vpod
Router OSPF between 1 WDM with Edg2 and vpod, neighbor in the uplink network neighboring OSPF has not established between Edg2 and vpod the router it is stuck in EchangeStart/DR
It is resolved it was a matter of mtu I increase the mtu size on the perimeter 2 GDE at 1600, the neighbouring ship comes up to and Full
-
Here's my problem. The ASA cannot reboot, reset or recover the module of sfr. I can console in the module, but it restarts it does nothing. I am waiting for a maintenance window to restart the entire ASA and see if that will fix it.
Sfr module cannot be reset, not upstairs, downstairs, or the State does not.
Data on the State of mod aircraft compatibility status
---- ------------------ --------------------- -------------
0 to Sys does not apply
IPS does not is not Applicable
cxsc does not not Applicable
SFR Init does not applyHe has already worked?
Have you tried "sw-module module sfr shut down the computer?"
Have you thought about making "sw-module module sfr" uninstall and re-imaging?
-
Hello OSPF send ASA stops
Dear support,
I was wondering if anyone has come across this problem, but have two Cisco ASA 5510 s ASA V7.2 (1), DM V5.2 (1) (in the active/passive failover configuration). They are related to a pair of 3750G - 48 - EMIS in a pile, OSPF is running on both, ASAs him redistribute outside and DMZ interfaces by a defined roadmap.
Everything works normally, but today I found the relationship to nearby between the ASA and 3750 s had broken. I tried the process OSPF on the ASAs and 3750 of compensation, but it would not solve the problem. The 3750 wouldn't show the ASAs in the nearby list, but other devices (via a point-to-point link) as State full. The ASAs would however show the 3750 s as State INIT/DROTHER.
Debugs showed that the ASAs received Hellos of the 3750, but sent no one. The 3750 s has shown, it was sending of Hellos but does not receive any one of the ASAs
To set that I had to reload the ASAs. This isn't my preferred solution, that should not do that.
Anyone who has experienced this problem and is there a resolution? Or track No. bug?
Thanks in advance for your help.
I always rate of useful answers.
Best regards, Adrian
Adrian,
Workaround bug proposed adding static ARP for the neighboring device. Add a static ARP entry for the 3750 on your ASA. The bug only applies to the ASA and therefore, you should not need a static entry on the 3750.
HTH
Sundar
-
3000 VPN concentrator using ospf md5 authentication failed
Hi all
I just tested ospf with a 3005 VPN connected with a cisco router using ospf md5 authentication, but fail. Cisco router, I can see neighbouring State ospf is "INIT", but can not see any connection VPN 3005, physical connection is good, ping can be reached between them. I tried the command "ip ospf authentication message-digest & ip ospf authentication-key ' and"ip ospf message-digest-key"command in the router the password is the same in both sides and the md5 id has been set. But when I use simple authentication or disable authentication that the neighbor relationship can ride. Any body met this case before? Thank you!
Best regards
Teru Lei
Hello
This is a known bug, I also met this before: CSCef38044
It is not possible to accumulate OSPF with newer versions of IOS, on which they'RE ability is enabled using MD5 hash neighborship. They'RE capa is activated somewhere of 12.2 T. This behavior can be found on CVPN 4.1.5 and above whose 4.7 also.
I tested it with several IOS and OS CVPN - same result. The symptom: router ospf neighborship remains in the State INIT/DROTHER.
Workaround is to configure the router:
router ospf 1
No they're ability
This will solve your problem.
Attila Suba
-
LaserJet 1536dnf: HP LaserJet 1536 stuck in Permanent storage Init.
Hello, tried to put in the other forum, I already found on it but could not do.
We have the above printer. Sometimes when you turn it on, you get nothing on the screen and the ready, alert and toner low LED, all lights. Sometimes you turn on the printer and you get all three lights on and then Hewlett-Packard on the screen with a few arrows below it, but it never completely starts.
I tried to remove all cables from the printer, but it does not help. Tried to connect the power supply directly in multiple points of sale, but that did not help. I tried a different power cable, but that did not help or the other.
Found the instructions for a cold reboot (arrow to the right keep and Cancel button, printer and wait that Init of Permanent storage on the screen, then release), but it does not help. Sometimes when doing this process, you get even any information on the LCD screen and you have to remove the power cord and try several times to the same it get to the point where now this key sequence actually gets the Permanent storage Init message on the screen.
is there something I'm missing or another way to do a factory reset? I would like to know if this is the problem with this printer or if it is simply getting old and we need to get a new one.
Thank you!
Any time that I've seen this is the trainer who is bad and must be replaced. Unfortunately hp does not part. Less expensive, I could find:
http://www.Amazon.com/HP-LaserJet-formatter-Board-Assembly/DP/B00SBD79A2
-
HP Color Laserjet pro mf m177f: stuck on Intializing
Hello from the Germany,
Unfortunately my new printer is stuck on initializing. I read a few solutions but they didn't work (hard rest) and I also turn around the cartridges for example black on the front but the printer was still saying that I should turn black to the edge. I don't know what to do now.
I hope you can help me
and sorry for my bad English
Sincerely
Firstly unplug everyting the printer except the power cord and turn on the printer. If it comes to prepare this way, you have a bad printjob causing the printer to initialize time and time again. If still the same problem do reset below. If this does not work, then your trainer is bad.
The NVRAM initialization
Perform initialization of the NVRAM resets the settings and the following information:
● all the menu settings are reset to the factory default values.
● all location settings, such as language and national and regional, are reset to zero.
ATTENTION: All integrated network settings are also reset. Don't forget to print a page of configuration before
restore the default values. Make a note of the IP address that is listed on the Jetdirect configuration page. You could
you want to restore the IP address after the NVRAM initialization.
After a the NVRAM initialization, reconfigure all computers that print to this product. Uninstall and
then reinstall the product on computers software.
1. turn off the product.
2. press the right arrow key. Hold this button you turn on the product.
3. where a Permanent init storage. appears on the screen, release the arrow button to the right.
When the product has completed the NVRAM initialization, it returns to the ready state. -
Windows Update stuck forever looking for updates. Win7 Ultimate x 64 SP1
General information
I had a system that works with Windows 7 Ultimate 64 bit. It is a platform for development and simulation that encrypted weeks of configuration and installs operational mode. It was installed in 2012 after my old motherboard has been damaged (I had to get a new license... not just).
I opted for Windows 10 months ago, but because I wasn't ready I postponed. All of a sudden he just kept tenacious and like a child (not the friendliest approach Microsoft!).
Last week he suddenly put a gun to my head and me has everything just no other choice to postpone, just install. Fortunately, I had done a backup of the Image of the previous day, so with the gun to my head I let him go ahead with the 10 of Windows 'upgrade '.
Upgrade Windows 10 seemed to go wrong to 83% or more with a screen saying she was hurt that she would try again turned. If she did, and this time he APPEARED to go. Then I got to the Windows 10 for final configuration.
After the restart the development & simulation PC was totally unusable! It wouldn't start Windows 10 or it could repair itself.
In view of the "wonderful" experience I really felt not restoring the Image that would be to reformat my OS drive was something I could give my vote of confidence.
Then... I went out a bought a new hard drive and monitor and installed my trust Windows 7 Ultimate x 64 SP1 on it with the intention of NEVER try to 'upgrade' to Windows 10, as it was more "trouble free" than "free upgrade".
The question
So after having been set back a few hundred dollars and having lost several days of development work, I got my new barebones installation:
- Windows 7 Ultimate 64 bit
- Brand new WD Caviar Blue 1 TB (without damages or errors on this)
- (re) My copy of windows activation
- Installed all the drivers of motherboard
The problem is when I go to Windows Update, it shows me 16 updates installed, but it ALWAYS gets stuck on "check updates" with "more recent audit of updates: never'and'updates have been installed: never'and'you receive updates: for Windows and other products from Microsoft Update". ""
It is configured to automatic updates, but all other settings give the same problem, no updates are installing more than 16 who are already there:
- KB2888049
- KB2882822
- KB2834140
- KB2786081
- KB2731771
- KB2729094
- KB2639308
- KB2533623
- KB2670838
- Internet Explorer 11 (downloaded manually)
- Package of spelling English
- Package of English Hyphenation
- KB2534111
- KB976902
- KB2565063 (Visual C++ 2010 x 86 redistributable components)
- KB2565063 (redistributable components of Visual C++ 2010 x 64)
Given that verification of updates is suspended (they weren't there before the problem) I manually downloaded and installed:
- Kaspersky Antivirus 2016
- Microsoft .NET Framework 4 Client Profile & extended (necessary for antivirus)
So, how can I get Windows Update to work again? I lost about 4 days of work thanks to this "upgrade".
For what I was able to see the update of Windows is the latest version of wuauserv.dll. It is an important part of WindowsUpdate.log of today. Note, however, that initially I had intentionally disconnected the network cable, reinstated later, but the problem persists. Note also there are several DatStor warnings about adding a URL that does not. :
Windows Update log
2016-07-27 12:47:50:883 588 b44 Misc = logging initialized (build: 7.6.7600.320, tz:-0500) =.
2016-07-27 12:47:50:976 588 b44 Misc = process: C:\Windows\system32\svchost.exe
2016-07-27 12:47:51:179 588 b44 Misc = Module: c:\windows\system32\wuaueng.dll
2016-07-27 12:47:50:883 588 b44 Service *.
2016-07-27 12:47:51:288 588 b44 Service * START * Service: Service startup
2016-07-27 12:47:51:398 588 b44 Service *.
2016-07-27 12:47:51:678 588 b44 Agent * WU client version 7.6.7600.320
2016-07-27 12:47:51:678 588 b44 Agent * Base Directory: C:\Windows\SoftwareDistribution
2016-07-27 12:47:51:678 588 b44 Agent * access type: no proxy
2016-07-27 12:47:51:678 588 b44 Agent * network state: disconnected
2016-07-27 12:47:53:192 588 b44 DtaStor AU service default is {00000000-0000-0000-0000-000000000000}
2016-07-27 12:47:53:285 588 b44 DtaStor AU service default is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2016-07-27 12:47:53:379 588 b44 Agent WARNING: cannot access the cabin auth, fatal error 0 x 80070003
2016-07-27 12:47:53:379 588 b44 Agent WARNING: invalid service in the backup data store; cleaning of
2016-07-27 12:47:53:379 588 b44 Agent WARNING: cannot add and register of service 7971f918-a847-4430-9279-4a52d1efe18d to the data store 0 x 80240031
2016-07-27 12:47:53:379 588 b44 Agent WARNING: default Service recovery: any attempt to add pending registration for the 7971f918-a847-4430-9279-4a52d1efe18d service to the data store
2016-07-27 12:48:38:494 588 b44 report CWERReporter::Init succeeded
2016-07-27 12:48:38:494 588 b44 Agent * Agent: initialization of Windows Update Agent *.
2016-07-27 12:48:38:494 588 b44 Agent * prerequisite roots succeeded.
2016-07-27 12:48:38:494 588 b44 Agent * Agent: initialization of the global parameters cache *.
2016-07-27 12:48:38:494 588 b44 Agent * WSUS server:
2016-07-27 12:48:38:494 588 b44 Agent * state WSUS server:
2016-07-27 12:48:38:494 588 b44 Agent * target group: (Unassigned Computers)
2016-07-27 12:48:38:494 588 b44 Agent * Windows Update access disabled: No.
2016-07-27 12:48:38:510 588 b44 DnldMgr Download manager restoring 0 downloads
2016-07-27 12:48:38:510 588 b44 to THE # to THE: initialization of automatic updates.
2016-07-27 12:48:38:510 588 b44 to THE timeout parameter next detection to 2016-07-27 17:48:38
2016-07-27 12:48:38:510 588 b44 to THE setting according to sqm report timeout for 2016-07-27 17:48:38
2016-07-27 12:48:38:510 588 b44 to # approval type: on demand (user preference)
2016-07-27 12:48:38:510 588 b44 to THE # scheduled install date and time: every day at 09:00
2016-07-27 12:48:38:510 588 b44 to THE # automatically install minor updates: Yes (user preference)
2016-07-27 12:48:38:510 588 b44 to THE # will interact with non-admins (Non-admins are high (user preference))
2016-07-27 12:48:38:510 588 b44 to THE # poster notifications of recommended software (user preference)
2016-07-27 12:48:38:510 588 b44 to THE initialization feature updates
2016-07-27 12:48:38:510 588 b44 to THE Found set 0 cached updates featured
2016-07-27 12:48:38:728 588 b44 report * report: initialization of static data to report *.
2016-07-27 12:48:38:728 588 b44 report * OS Version = 6.1.7601.1.0.65792
2016-07-27 12:48:38:728 588 b44 report * OS Product Type = 0x00000001
2016-07-27 12:48:38:728 588 b44 report * computer brand = to be filled by O.E.M.
2016-07-27 12:48:38:728 588 b44 report * computer model = to be filled by O.E.M.
2016-07-27 12:48:38:728 588 b44 report * Bios revision = P2.00
2016-07-27 12:48:38:728 588 b44 report * name of Bios = BIOS Date: 13/07/12 16:19:10 worm: 04.06.05
2016-07-27 12:48:38:728 588 b44 report * the Bios Release Date = 2012-07 - 13 T 00: 00:00
2016-07-27 12:48:38:728 588 b44 report * locale 1033 = ID
2016-07-27 12:48:38:759 588 to THE b44 successfully wrote event to THE health state: 0
2016-07-27 12:48:38:759 588 to THE b44 successfully wrote event to THE health state: 0
2016-07-27 12:48:38:759 b44 588 to THE delayed finish to initialize
2016-07-27 12:48:38:759 588 b44 to THE setting according to sqm report timeout for 2016-07-28 17:48:38
2016-07-27 12:48:38:759 588 b44 to THE #.
2016-07-27 12:48:38:759 588 b44 to THE # START # to THE: research updates
2016-07-27 12:48:38:759 588 b44 to THE #.
2016-07-27 12:48:38:775 588 to THE b44<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
2016-07-27 12:48:38:775 588 d40 Agent *.
2016-07-27 12:48:38:775 588 d40 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
2016-07-27 12:48:38:775 588 d40 Agent *.
2016-07-27 12:48:38:775 588 d40 Agent * Online = No; Ignore download priority = No
2016-07-27 12:48:38:775 588 d40 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
2016-07-27 12:48:38:775 588 d40 Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
2016-07-27 12:48:38:775 588 d40 Agent * Search Scope = {Machine}
2016-07-27 12:48:38:884 588 d40 Agent * found 0 updates day and 0 categories in the search. rules of RCT evaluated 0 out of 0 deployed entities
2016-07-27 12:48:38:884 588 d40 Agent *.
2016-07-27 12:48:38:884 588 d40 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
2016-07-27 12:48:38:884 588 d40 Agent *.
2016-07-27 12:48:38:884 588 d8c to THE > # RETURN # to THE: research updates [CallId = {769AD510-F9E5-4375-A22A-4471BC8949F2}]
2016 07-27 12:48:38:884 588 d8c at # 0 updates detected
2016-07-27 12:48:38:884 588 d8c to THE #.
2016-07-27 12:48:38:884 588 d8c to # END # in THE: research updates [CallId = {769AD510-F9E5-4375-A22A-4471BC8949F2}]
2016-07-27 12:48:38:884 588 d8c to THE #.
2016-07-27 12:48:38:884 588 d8c as star no. updates notifications to show
2016-07-27 12:48:38:884 588 to THE d8c successfully wrote event to THE health state: 0
2016-07-27 12:48:38:884 588 b44 to THE #.
2016-07-27 12:48:38:884 588 b44 to THE # START # to THE: research updates
2016-07-27 12:48:38:884 588 b44 to THE #.
2016-07-27 12:48:38:884 588 b44 to THE # WARNING: could not find updates with error 8024001F
2016-07-27 12:48:38:884 588 b44 to THE #.
2016-07-27 12:48:38:884 588 b44 to # END # in THE: research updates [CallId = {00000000-0000-0000-0000-000000000000}]
2016-07-27 12:48:38:884 588 b44 to THE #.
2016 07-27 12:48:38:884 588 b44 to THE undetected network connection, subscribing for network log for AU detection occurs
2016-07-27 12:48:38:884 588 to THE b44 successfully wrote event to THE health state: 0
2016-07-27 12:48:38:884 588 to THE b44 successfully wrote event to THE health state: 0
2016-07-27 12:48:43:767 588 d40 report REPORT EVENT: {06556732-E437-47E7-ABD7-EA27598DFEE8} 12:48:38:759 2016-07-27-0500 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates success content install Reboot completed.
2016-07-27 12:48:43:782 588 d40 report CWERReporter finish event management. (00000000)
2016-07-27 12:49:01:691 588 b44 forced THE timer expired for scheduled install installation
2016-07-27 12:49:01:691 588 b44 to THE UpdateDownloadProperties: 0 downloads are still ongoing.
2016-07-27 12:49:01:691 588 b44 phase of installation to THE adjustment to THE planned for 2016-07-28 14:00
2016-07-27 12:49:01:691 588 to THE b44 successfully wrote event to THE health state: 0
2016-07-27 12:49:06:699 588 d40 report CWERReporter finish event management. (00000000)
2016-07-27 12:52:53:600 588 998 AU successfully wrote event to THE health state: 0
2016-07-27 12:52:58:608 588 d40 report CWERReporter finish event management. (00000000)
2016-07-27 12:53:49:371 588 b44 network set up, connection to THE can make detection now
2016-07-27 12:53:54:378 588 d40 report CWERReporter finish event management. (00000000)
2016-07-27 12:54:07:747 3172 ae4 Misc = logging initialized (build: 7.6.7600.320, tz:-0500) =.
2016-07-27 12:54:07:747 3172 ae4 Misc = process: C:\Windows\SysWOW64\wusa.exe
2016-07-27 12:54:07:747 3172 ae4 Misc = Module: C:\Windows\SysWOW64\wuapi.dll
2016-07-27 12:54:07:747 3172 ae4 COMAPI - COMAPI: IUpdateServiceManager::AddScanPackageService -.
2016-07-27 12:54:07:747 3172 ae4 COMAPI - ServiceName = stand-alone installation of Windows Update
2016-07-27 12:54:07:747 3172 ae4 COMAPI - ScanFileLocation = C:\acd3a300d42b6da77fcab8ef24\wsusscan.cab
2016-07-27 12:54:07:779 588 998 Misc validation signature for C:\Windows\SoftwareDistribution\ScanFile\63b4d649-6173-4183-b52f-cba9c1c9f4ca\Source.cab with dwProvFlags 0 x 00000080:
2016-07-27 12:54:17:825 588 998 Misc Microsoft signed: Yes
2016 07-27 12:54:17:903 588 998 DtaStor default service AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2016-07-27 12:54:17:903 3172 ae4 COMAPI - added scan package ServiceID = {63B4D649-6173-4183-B52F-CBA9C1C9F4CA} third service service
2016-07-27 12:54:17:903 3172 ae4 COMAPI-
2016-07-27 12:54:17:903 3172 ae4 COMAPI - START - COMAPI: search [ClientId = wusa]
2016-07-27 12:54:17:903 3172 ae4 COMAPI-
2016-07-27 12:54:17:903 588 d40 Agent *.
2016 07-27 12:54:17:903 588 d40 Agent * START * Agent: finding updates [CallerId = wusa] of
2016-07-27 12:54:17:903 588 d40 Agent *.
2016-07-27 12:54:17:903 588 d40 Agent * Online = Yes; Ignore download priority = No
2016-07-27 12:54:17:903 588 d40 Agent * criteria = "DeploymentAction ="Install"
2016-07-27 12:54:17:903 588 d40 Agent * ServiceID = {63B4D649-6173-4183-B52F-CBA9C1C9F4CA} third service
2016-07-27 12:54:17:903 588 d40 Agent * Search Scope = {Machine}
2016-07-27 12:54:17:903 3172 ae4 COMAPI<-- submitted="" --="" comapi:="" search="" [clientid="">
2016-07-27 12:54:17:997 588 d40 PT +++ PT: Synchronizing server updates +++
2016-07-27 12:54:17:997 588 d40 PT plus serviceId offline is {63B4D649-6173-4183-B52F-CBA9C1C9F4CA}
2016-07-27 12:54:17:997 588 d40 PT WARNING: caching of cookie has expired or new PID is available
2016-07-27 12:54:19:167 588 d40 PT +++ PT: synchronizing extended update info +++
2016-07-27 12:54:19:167 588 d40 PT plus serviceId offline is {63B4D649-6173-4183-B52F-CBA9C1C9F4CA}
2016-07-27 12:54:19:401 588 d40 Agent * updated added {966C3F8A-1E1C-40CC-B038-77EC1EF7AAB6}.501 to search result
2016-07-27 12:54:19:401 588 d40 Agent * found 1 updates day and 58 categories in the search. rules apply evaluated 126 on 255 deployed entities
2016-07-27 12:54:19:401 588 d40 Agent *.
2016-07-27 12:54:19:401 588 d40 Agent * END * Agent: finding updates [CallerId = wusa] of
2016-07-27 12:54:19:401 588 d40 Agent *.
2016-07-27 12:54:19:401 3172 bdc COMAPI > COMAPI - RECOVERY -: search [ClientId = wusa]
2016-07-27 12:54:19:401 3172 bdc COMAPI - updates found = 1
2016-07-27 12:54:19:401 3172 bdc COMAPI-
2016-07-27 12:54:19:401 3172 bdc COMAPI - END--COMAPI: search [ClientId = wusa]
2016-07-27 12:54:19:401 3172 bdc COMAPI-
2016-07-27 12:54:19:401 588 d08 DnldMgr * DnldMgr: update copy cached [UpdateId = {155A78A3-2E98-432E-B147-F7C881F9ACD4}.501] *.
2016-07-27 12:54:19:416 588 d08 DnldMgr asking Manager to generate requests for non-plage.
2016-07-27 12:54:19:416 588 Manager d08 generating demand for CBS update 155A78A3-2E98-432E-B147-F7C881F9ACD4 in C:\Windows\SoftwareDistribution\Download\56ae0ad0ea8065165b2864106b822911_ctc sandbox
2016-07-27 12:54:19:416 588 d08 Manager selecting stand-alone because update has no specific charge.
2016-07-27 12:54:19:416 588 Manager d08 selected load type useful is ptSelfContained
2016-07-27 12:54:19:416 588 d08 Manager detected the download status is dsStart
2016-07-27 12:54:19:416 588 Manager d08 adding Windows6. 1 - KB958488 - x 64 .cab (entire file) to the list of applications.
2016-07-27 12:54:19:416 588 Manager d08 request generation for CBS updated complete with hr = 0 x 0 and pfResetSandbox = 0
2016-07-27 12:54:19:416 588 d08 Misc validation signature for C:\Windows\SoftwareDistribution\Download\56ae0ad0ea8065165b2864106b822911_ctc\Windows6.1-KB958488-x64.cab with dwProvFlags 0 x 00000080:
2016-07-27 12:54:19:416 588 d08 Misc Microsoft signed: Yes
2016-07-27 12:54:19:416 588 d08 DnldMgr asking Manager to generate requests for non-plage.
2016-07-27 12:54:19:416 588 Manager d08 generating demand for CBS update 155A78A3-2E98-432E-B147-F7C881F9ACD4 in C:\Windows\SoftwareDistribution\Download\56ae0ad0ea8065165b2864106b822911_ctc sandbox
2016-07-27 12:54:19:416 588 d08 Manager selecting stand-alone because update has no specific charge.
2016-07-27 12:54:19:416 588 Manager d08 selected load type useful is ptSelfContained
2016-07-27 12:54:19:416 588 d08 Manager detected the download status is dsHavePackage
2016-07-27 12:54:19:416 588 Manager d08 request generation for CBS updated complete with hr = 0 x 0 and pfResetSandbox = 0
2016-07-27 12:54:19:432 3172 ae4 COMAPI-
2016-07-27 12:54:19:432 3172 ae4 COMAPI - START - COMAPI: install [ClientId = wusa]
2016-07-27 12:54:19:432 3172 ae4 COMAPI-
2016-07-27 12:54:19:432 3172 ae4 COMAPI - allow source guests: Yes; Forced: No; Quiet strength: No.
2016-07-27 12:54:19:432 3172 ae4 COMAPI - updates on demand: 1
2016-07-27 12:54:19:432 3172 ae4 COMAPI - ServiceID = {63B4D649-6173-4183-B52F-CBA9C1C9F4CA} third service
2016-07-27 12:54:19:432 3172 ae4 COMAPI - updates to install = 1
2016-07-27 12:54:19:432 3172 ae4 COMAPI<-- submitted="" --="" comapi:="" install="" [clientid="">
2016-07-27 12:54:19:432 588 d0c Agent *.
2016-07-27 12:54:19:432 588 d0c Agent * START * Agent: installing updates [CallerId = wusa]
2016-07-27 12:54:19:432 588 d0c Agent *.
2016-07-27 12:54:19:432 588 d0c Agent * updates installed = 1
2016-07-27 12:54:19:432 588 d0c Agent * title = update for Windows (KB958488)
2016-07-27 12:54:19:432 588 d0c Agent * UpdateId = {966C3F8A-1E1C-40CC-B038-77EC1EF7AAB6}.501
2016-07-27 12:54:19:432 588 d0c Agent * bundles 1 updates:
2016-07-27 12:54:19:432 588 d0c Agent * {155A78A3-2E98-432E-B147-F7C881F9ACD4}.501
2016-07-27 12:54:19:447 588 d0c Agent WARNING: impossible to calculate the time of previous restore point with error 0 x 80070002; setting restore point
2016-07-27 12:54:24:439 588 d0c Manager trying to create Manager remote processes such as MUNICH\Lord of things in session 1
2016-07-27 12:54:24:595 588 d0c DnldMgr preparation update for install, updateId is {155A78A3-2E98-432E-B147-F7C881F9ACD4}. 501.
2016-07-27 12:54:24:595 2996 ea0 Misc = logging initialized (build: 7.6.7600.320, tz:-0500) =.
2016-07-27 12:54:24:595 2996 ea0 Misc = process: C:\Windows\system32\wuauclt.exe
2016-07-27 12:54:24:595 2996 ea0 Misc = Module: C:\Windows\system32\wuaueng.dll
2016-07-27 12:54:24:595 2996 Manager ea0:
2016-07-27 12:54:24:595 2996 ea0 Handler: START: Manager: CBS install
2016-07-27 12:54:24:595 2996 Manager ea0:
2016-07-27 12:54:24:595 2996 ea0 Manager to start installation of CBS update 155A78A3-2E98-432E-B147-F7C881F9ACD4
2016-07-27 12:54:24:595 2996 ea0 Manager CBS package identity: Package_for_KB958488 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.7600.16513
2016-07-27 12:54:24:658 2996 Manager ea0 of stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\56ae0ad0ea8065165b2864106b822911\Windows6.1-KB958488-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\56ae0ad0ea8065165b2864106b822911\inst
2016-07-27 12:54:29:697 2996 Manager ea0 finished install of CBS update with type = 1, requiresReboot = 0, installerError = 0, hr = 0 x 0
2016-07-27 12:54:29:697 2996 Manager ea0:
2016-07-27 12:54:29:697 2996 ea0 Handler: END: Manager: CBS install
2016-07-27 12:54:29:697 2996 Manager ea0:
2016-07-27 12:54:29:697 588 d0c Agent *.
2016 07-27 12:54:29:697 588 b44 in detection Can only non if AU is interactive only
2016-07-27 12:54:29:697 588 d0c Agent * END * Agent: installing updates [CallerId = wusa]
2016-07-27 12:54:29:697 588 d0c Agent *.
2016-07-27 12:54:29:697 3172 bdc COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
2016-07-27 12:54:29:697 3172 bdc COMAPI - installation call results (success = 1, succeeded with errors = 0, failed = 0, missing = 0)
2016-07-27 12:54:29:697 3172 bdc COMAPI - reboot needed = no.
2016-07-27 12:54:29:697 3172 bdc COMAPI-
2016-07-27 12:54:29:697 3172 bdc COMAPI - END--COMAPI: install [ClientId = wusa]
2016-07-27 12:54:29:697 3172 bdc COMAPI-
2016-07-27 12:54:29:697 3172 ae4 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
2016-07-27 12:54:29:697 3172 ae4 COMAPI - ServiceId = {63b4d649-6173-4183-b52f-cba9c1c9f4ca}
2016-07-27 12:54:29:743 3172 ae4 COMAPI IUpdateService removal scan volatile package service, serviceID = {63B4D649-6173-4183-B52F-CBA9C1C9F4CA}
2016-07-27 12:54:29:743 588 ebc Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
2016-07-27 12:54:29:743 3172 ae4 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
2016-07-27 12:54:34:704 588 d40 report REPORT EVENT: {26DD85DC-61D9-456E-AA0E-48C1714CF498} 12:54:29:697 2016-07-27-0500 1 183 101 {966C3F8A-1E1C-40CC-B038-77EC1EF7AAB6} 501 wusa 0 success content install Installation successful: Windows successfully installed the following update: update for Windows (KB958488)
2016-07-27 12:54:34:704 588 d40 report CWERReporter finish event management. (00000000)
2016-07-27 12:55:22:035 588 d40 report CWERReporter finish event management. (00000000)
2016-07-27 12:55:39:257 588 d40 report CWERReporter finish event management. (00000000)
2016-07-27 12:58:30:530 588 bcc to (non-interactive) Offline detection triggering
2016-07-27 12:58:30:530 588 b44 to THE #.
2016-07-27 12:58:30:530 588 b44 to THE # START # to THE: research updates
2016-07-27 12:58:30:530 588 b44 to THE #.
2016-07-27 12:58:30:530 588 to THE b44<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
2016-07-27 12:58:30:530 588 d40 Agent *.
2016-07-27 12:58:30:530 588 d40 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
2016-07-27 12:58:30:530 588 d40 Agent *.
2016-07-27 12:58:30:530 588 d40 Agent * Online = No; Ignore download priority = No
2016-07-27 12:58:30:530 588 d40 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
2016-07-27 12:58:30:530 588 d40 Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
2016-07-27 12:58:30:530 588 d40 Agent * Search Scope = {Machine}
2016-07-27 12:58:30:577 588 d40 Agent * found 0 updates day and 0 categories in the search. rules of RCT evaluated 0 out of 0 deployed entities
2016-07-27 12:58:30:577 588 d40 Agent *.
2016-07-27 12:58:30:577 588 d40 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
2016-07-27 12:58:30:577 588 d40 Agent *.
2016-07-27 12:58:30:577 588 d8c to THE > # RETURN # to THE: research updates [CallId = {350C2C6C-73AC-4CE0-90B0-2CD4BD54A9A8}]
2016 07-27 12:58:30:577 588 d8c at # 0 updates detected
2016-07-27 12:58:30:577 588 d8c to THE #.
2016-07-27 12:58:30:577 588 d8c to # END # in THE: research updates [CallId = {350C2C6C-73AC-4CE0-90B0-2CD4BD54A9A8}]
2016-07-27 12:58:30:577 588 d8c to THE #.
2016-07-27 12:58:30:577 588 d8c as star no. updates notifications to show
2016-07-27 12:58:30:577 588 d8c phase of installation to THE adjustment to THE planned for 2016-07-28 14:00
2016-07-27 12:58:30:577 588 to THE d8c successfully wrote event to THE health state: 0
2016-07-27 12:58:30:577 588 to THE d8c successfully wrote event to THE health state: 0
2016-07-27 12:58:30:577 588 b44 to THE #.
2016-07-27 12:58:30:577 588 b44 to THE # START # to THE: research updates
2016-07-27 12:58:30:577 588 b44 to THE #.
2016-07-27 12:58:30:577 588 to THE b44<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
2016-07-27 12:58:30:577 588 d40 Agent *.
2016-07-27 12:58:30:577 588 d40 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
2016-07-27 12:58:30:577 588 d40 Agent *.
2016-07-27 12:58:30:577 588 d40 Agent * Online = Yes; Ignore download priority = No
2016-07-27 12:58:30:577 588 d40 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
2016-07-27 12:58:30:577 588 d40 Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
2016-07-27 12:58:30:577 588 d40 Agent * Search Scope = {Machine}
2016-07-27 12:58:41:075 588 d40 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-win7sp1-wuredir.cab with dwProvFlags 0 x 00000080:
2016-07-27 12:58:41:091 588 d40 Misc signed Microsoft: NA
2016-07-27 12:58:41:091 588 d40 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab with dwProvFlags 0 x 00000080:
2016-07-27 12:58:41:091 588 d40 Misc signed Microsoft: NA
2016-07-27 12:58:41:107 588 d40 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP1550.tmp with dwProvFlags 0 x 00000080:
2016-07-27 12:58:41:153 588 d40 Misc signed Microsoft: NA
2016-07-27 12:58:41:169 588 d40 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab with dwProvFlags 0 x 00000080:
2016-07-27 12:58:41:169 588 d40 Misc signed Microsoft: NA
2016-07-27 12:58:41:169 588 d40 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP159F.tmp with dwProvFlags 0 x 00000080:
2016-07-27 12:58:41:169 588 d40 Misc signed Microsoft: NA
2016-07-27 12:58:41:169 588 d40 Agent download new auth cabin for service 7971f918-a847-4430-9279-4a52d1efe18d to http://ds.download.windowsupdate.com/v11/2/microsoftupdate/redir/v6-muauth.cab
2016-07-27 12:58:41:559 588 d40 Misc validation signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab with dwProvFlags 0 x 00000080:
2016-07-27 12:58:41:559 588 d40 Misc signed Microsoft: NA
2016-07-27 12:58:41:559 588 d40 Misc validation signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab with dwProvFlags 0 x 00000080:
2016-07-27 12:58:41:559 588 d40 Misc signed Microsoft: NA
2016-07-27 12:58:41:575 588 d40 Misc validation signature for C:\Windows\SoftwareDistribution\AuthCabs\TMP1726.tmp with dwProvFlags 0 x 00000080:
2016-07-27 12:58:41:575 588 d40 Misc signed Microsoft: NA
2016-07-27 12:58:41:575 588 d40 DtaStor AU service default is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2016-07-27 12:58:41:575 588 d40 agent by default calling Service collection chosen with success of service 7971f918-a847-4430-9279-4a52d1efe18d
Properties of the DtaStor 2016-07-27 12:58:41:575 588 d40 update service: service registered with AU is {7971F918-A847-4430-9279-4A52D1EFE18D}
2016-07-27 12:58:41:575 b44 588 changed THE service provider info
2016-07-27 12:58:41:575 588 b44 to THE required refresh...
2016-07-27 12:58:41:575 588 d40 Agent * WARNING: resolution of the online registration service/service ID failed, hr = 0x8024A005
2016-07-27 12:58:41:575 588 b44 to THE timeout parameter next detection to 2016-07-27 18:08:41
2016-07-27 12:58:41:575 588 b44 put in to THE to THE next Star software notification timeout for 2016-07-27 17:58:41
2016-07-27 12:58:41:575 588 to THE b44 successfully wrote event to THE health state: 0
2016-07-27 12:58:41:606 588 d40 Agent * WARNING: exit code = 0x8024A005
2016-07-27 12:58:41:606 588 d40 Agent *.
2016-07-27 12:58:41:606 588 d40 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
2016-07-27 12:58:41:606 588 d40 Agent *.
2016-07-27 12:58:41:606 588 d40 Agent WARNING: customer WU didn't search for the update with error 0x8024a005
2016-07-27 12:58:41:606 588 d8c Agent WARNING: WU client fails to call to find call {B5B11193-C23B-4621-A8AA-E20F74BDDD78} with error 0x8024000c
2016-07-27 12:58:41:606 588 d40 report CWERReporter finish event management. (00000000)
2016-07-27 12:58:46:582 588 d40 report REPORT EVENT: {83BDD561-A1DC-463A-B084-BEA90C226570} 12:58:41:606 2016-07-27-0500 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024 a 005 AutomaticUpdates failure software sync Windows Update Client has not detected with the 0x8024a005 error.
2016-07-27 12:58:46:582 588 d40 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
2016-07-27 12:58:46:582 588 d40 WER sent report: 7.6.7600.320 0x8024a005 00000000-0000-0000-0000-000000000000 Scan 101 unmanaged
2016-07-27 12:58:46:582 588 d40 report CWERReporter finish event management. (00000000)
2016-07-27 13:23:56:392 588 to THE 9ec # to THE: definition of new options to THE #.
2016-07-27 13:23:56:392 588 9ec to THE parameter to THE Type of approval 4
2016-07-27 13:23:56:392 588 9ec setting install schedule day 0
2016-07-27 13:23:56:392 588 9ec setting installation schedule time at 14
2016-07-27 13:23:56:392 588 to THE 9ec successfully wrote event to THE health state: 0
2016-07-27 13:23:56:392 588 9ec to # policy has changed, update them as needed = No
2016-07-27 13:23:56:392 588 9ec to # approval type: on demand (user preference)
2016-07-27 13:23:56:392 588 9ec to THE # scheduled install date and time: every day at 14:00
2016-07-27 13:23:56:392 588 9ec to THE # automatically install minor updates: Yes (user preference)
2016-07-27 13:23:56:392 588 9ec to THE # will interact with non-admins (Non-admins are high (user preference))
2016-07-27 13:23:56:392 588 9ec to # poster of notifications of recommended software (user preference)
2016-07-27 13:23:56:392 588 9ec to THE to THE settings changed through the user's preference.
2016-07-27 13:23:56:392 588 9ec time of installation to THE adjustment to THE planned for 2016-07-27 19:00
2016-07-27 13:23:56:392 588 to THE 9ec successfully wrote event to THE health state: 0
2016-07-27 13:23:56:402 588 to THE 9ec successfully wrote event to THE health state: 0
2016-07-27 13:24:01:392 588 e40 CWERReporter finish event management report. (00000000)
2016-07-27 13:24:06:080 588 9ec detection of THE shutter to THE via API DetectNow
2016-07-27 13:24:06:080 588 9ec to trigger detection online (interactive)
2016-07-27 13:24:06:080 588 b44 to THE #.
2016-07-27 13:24:06:081 588 b44 to THE # START # to THE: research updates
2016-07-27 13:24:06:081 588 b44 to THE #.
2016-07-27 13:24:06:084 588 to THE b44<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
2016-07-27 13:24:06:084 588 e40 Agent *.
2016-07-27 13:24:06:085 588 e40 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
2016-07-27 13:24:06:085 588 e40 Agent *.
2016-07-27 13:24:06:085 588 e40 Agent * Online = Yes; Ignore download priority = No
2016-07-27 13:24:06:085 588 e40 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
2016-07-27 13:24:06:085 588 e40 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} third service
2016-07-27 13:24:06:085 588 e40 Agent * Search Scope = {Machine}
2016-07-27 13:24:06:121 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:144 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:145 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP5A8F.tmp with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:149 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:178 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-win7sp1-wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:180 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:587 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-win7sp1-wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:589 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:590 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:592 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:594 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP5C55.tmp with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:596 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:597 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:599 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:601 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP5C56.tmp with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:603 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:624 588 e40 Agent looking for updates auth cab for 7971f918-a847-4430-9279-4a52d1efe18d to http://ds.download.windowsupdate.com/v11/2/microsoftupdate/redir/v6-muauth.cab service
2016-07-27 13:24:06:624 588 Misc validation signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:626 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:782 588 Misc validation signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:784 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:784 588 e40 Setup looking for agent SelfUpdate
version Setup Client-2016-07-27 13:24:06:785 588 e40: Core: 7.6.7600.320 to the: 7.6.7600.320
2016-07-27 13:24:06:786 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:788 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:790 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP5D22.tmp with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:792 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:793 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-win7sp1-wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:794 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:955 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-win7sp1-wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:957 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:958 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:960 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:961 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP5DCE.tmp with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:964 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:965 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:967 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:06:968 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP5DCF.tmp with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:06:971 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:09:086 588 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:09:088 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:09:089 588 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMP661A.tmp with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:09:092 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:09:579 588 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:09:582 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:09:605 588 e40 Setup determine whether a new configuration manager should be downloaded
2016-07-27 13:24:09:605 588 e40 Setup Manager SelfUpdate is not found. It will be downloaded
2016-07-27 13:24:09:605 588 e40 Setup assessment applicability of the installation package ' ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.6.7600.320 '.
installation of 2016-07-27 13:24:10:501 588 e40 installation package "ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.6.7600.320 ' is already installed.
2016-07-27 13:24:10:501 588 e40 Setup assessment applicability of the installation package ' WUClient-SelfUpdate-aux-TopLevel ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.6.7600.320 '.
installation of 2016-07-27 13:24:10:559 588 e40 installation package "WUClient-SelfUpdate-aux-TopLevel ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.6.7600.320 ' is already installed.
2016-07-27 13:24:10:559 588 e40 Setup assessment applicability of the installation package ' WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.6.7600.320 '.
installation of 2016-07-27 13:24:10:626 588 e40 installation package "WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.6.7600.320 ' is already installed.
2016-07-27 13:24:10:626 588 checking configuration SelfUpdate filled e40. SelfUpdate is NOT necessary.
2016-07-27 13:24:11:063 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\v6-muredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:11:065 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:11:066 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:11:068 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:11:069 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\TMP6DD8.tmp with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:11:072 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:11:073 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:11:074 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:11:076 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\TMP6DD9.tmp with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:24:11:079 588 e40 Misc signed Microsoft: NA
2016-07-27 13:24:11:079 588 e40 PT +++ PT: Synchronizing server updates +++
2016-07-27 13:24:11:079 588 e40 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, server URL = https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
2016-07-27 13:24:11:374 588 e40 PT WARNING: caching of cookie has expired or new PID is available
2016-07-27 13:29:39:632 588 e40 driver driver corresponding to the device USB\VID_045E & PID_0730 & REV_0200 & MI_00
2016-07-27 13:29:39:632 588 e40 driver status: 0x180000a, ProblemNumber: 00000000
2016-07-27 13:29:39:632 588 e40 driver driver corresponding to the device PCI\VEN_10DE & DEV_05E3 & SUBSYS_82F91043 & REV_A1
2016-07-27 13:29:39:632 588 e40 driver status: 0x180200a, ProblemNumber: 00000000
2016-07-27 13:29:39:632 588 e40 driver matching to the PCI VEN_8086 & DEV_0162 & SUBSYS_01621849 & REV_09 device driver
2016-07-27 13:29:39:632 588 e40 driver status: 0x180200a, ProblemNumber: 00000000
2016-07-27 13:29:39:632 588 e40 driver driver corresponding to the PCI VEN_8086 & DEV_1E3A & SUBSYS_1E3A1849 & REV_04 device
2016-07-27 13:29:39:632 588 e40 driver status: 0x180200a, ProblemNumber: 00000000
2016-07-27 13:29:39:632 588 e40 driver matched device ACPI\INT33A0 driver
2016-07-27 13:29:39:632 588 e40 driver status: 0 x 1802400, ProblemNumber: 0x00001c
2016-07-27 13:31:41:232 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:31:41:236 588 e40 Misc signed Microsoft: NA
2016-07-27 13:31:41:238 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\TMP4C56.tmp with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:31:41:241 588 e40 Misc signed Microsoft: NA
2016-07-27 13:31:41:242 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\v6-muredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:31:41:243 588 e40 Misc signed Microsoft: NA
2016-07-27 13:31:41:678 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\v6-muredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:31:41:680 588 e40 Misc signed Microsoft: NA
2016-07-27 13:31:41:681 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:31:41:682 588 e40 Misc signed Microsoft: NA
2016-07-27 13:31:41:684 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\TMP4E0C.tmp with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:31:41:686 588 e40 Misc signed Microsoft: NA
2016-07-27 13:31:41:687 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\wuredir.cab with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:31:41:689 588 e40 Misc signed Microsoft: NA
2016-07-27 13:31:41:690 588 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\TMP4E1C.tmp with dwProvFlags 0 x 00000080 e40:
2016-07-27 13:31:41:693 588 e40 Misc signed Microsoft: NA
2016-07-27 13:31:41:693 588 e40 PT +++ PT: synchronizing extended update info +++
2016-07-27 13:31:41:693 588 e40 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, URL of the server = https://fe2.update.microsoft.com/v6/ClientWebService/client.asmxMANY OF THESE WARNINGS *.
2016-07-27 13:31:55:790 588 e40 DtaStor WARNING: attempted to add the URL for file XsVz8f4LdUwb18bpUhWU1gLILoU = http://download.windowsupdate.com/msdownload/update/software/dflt/2011/02/4125462_5ec573f1fe0b754c1bd7c6e9521594d602c82e85.cab when the file has not been previously added to the data store
2016-07-27 13:31:55:830 588 e40 DtaStor WARNING: attempted to add the URL http://download.windowsupdate.com/d/msdownload/update/others/2016/07/21523621_60fe9c3870fbab955beba8db1b926583ffff3ac1.cab to file YP6cOHD7q5Vb66jbG5Jlg / / / OsE = when the file has not been previously added to the data store
2016-07-27 13:31:55:830 588 e40 DtaStor WARNING: attempted to add the http://download.windowsupdate.com/d/msdownload/update/software/secu/2016/06/windows6.1-kb3168965-x64_936c2cdb1a9d11deb25a2b28d98cd300eff933fb.msu to file k2ws2xqdEd6yWiso2YzTAO/5 M/s = URL when the file has not been previously added to the data store
2016-07-27 13:31:55:830 588 e40 DtaStor WARNING: attempted to add the URL http://download.windowsupdate.com/c/msdownload/update/software/updt/2016/07/windows6.1-kb3035583-v4-x64_6953c82b7e740a3b1cb84bdea347fe6911234f5e.msu to file aVPIK350CjscuEveo0f + aREjT14 = when the file has not been previously added to the data store
2016-07-27 13:31:55:830 588 e40 DtaStor WARNING: attempted to add the URL for file mdwdmUUefy0j0Ii3ikJMFDAKXVs = http://download.windowsupdate.com/d/msdownload/update/software/secu/2016/06/windows6.1-kb3170455-x64_99dc1d99451e7f2d23d088b78a424c14300a5d5b.msu when the file has not been previously added to the data store
2016-07-27 13:31:55:830 588 e40 DtaStor WARNING: attempted to add the URL for file HQ1tIhFAy9h3pxs1M95l9KKHWkw = http://download.windowsupdate.com/d/msdownload/update/others/2016/07/21524335_1d0d6d221140cbd877a71b3533de65f4a2875a4c.cab when the file has not been previously added to the data store
2016-07-27 14:00:09:999 588 b44 forced THE timer expired for scheduled install installation
2016-07-27 14:00:09:999 588 b44 to THE UpdateDownloadProperties: 0 downloads are still ongoing.
2016-07-27 14:00:09:999 588 b44 phase of installation to THE adjustment to THE planned for 2016-07-28 19:00
2016-07-27 14:00:09:999 588 to THE b44 successfully wrote event to THE health state: 0
2016-07-27 14:17:24:958 6056 1498 Misc = logging initialized (build: 7.6.7600.320, tz:-0500) =.
2016-07-27 14:17:24:959 6056 1498 Misc = process: e:\db216bc0fa4035b11bff88b2\wusetup.exe
2016-07-27 14:17:24:958 6056 1498 Setup Windows Update stand-alone Client of installation: the resources dll path is e:\db216bc0fa4035b11bff88b2\en\wusetup.exe.mui
2016-07-27 14:17:24:960 6056 1498 configuration Windows Update Agent Client Configuration successful installation product root.
2016-07-27 14:17:24:960 6056 1498 CBS evaluation setup package "e:\db216bc0fa4035b11bff88b2\WUClient-SelfUpdate-Core-TopLevel.cab".
2016-07-27 14:17:25:037 6056 1498 as installation package will be installed
2016-07-27 14:17:25:037 6056 1498 CBS evaluation setup package "e:\db216bc0fa4035b11bff88b2\WUClient-SelfUpdate-ActiveX.cab".
2016-07-27 14:17:25:048 6056 1498 as installation package will be installed
2016-07-27 14:17:25:048 6056 1498 CBS evaluation setup package "e:\db216bc0fa4035b11bff88b2\WUClient-SelfUpdate-Aux-TopLevel.cab".
2016-07-27 14:17:25:086 6056 1498 as installation package will be installed
2016-07-27 14:17:25:268 6056 1498 Setup Windows Update stand-alone Client installation: eula file path is e:\db216bc0fa4035b11bff88b2\en\eula.rtf
2016-07-27 14:22:27:780 6056 1498 wusetup configuration is complete. Exit code is 0. Reset is NOT necessary
2016-07-27 15:36:10:515 588 768 to THE # to THE: definition of new options to THE #.
2016-07-27 15:36:10:515 588 768 to THE parameter at THE approval Type 2
2016-07-27 15:36:10:515 588 768 AU successfully wrote event to THE health state: 0
2016-07-27 15:36:10:515 588 768 to # policy has changed, update them as needed = No
2016-07-27 15:36:10:515 588 768 to # approval type: download prior notification (user preference)
2016-07-27 15:36:10:515 588 768 to THE # will interact with non-admins (Non-admins are high (user preference))
2016-07-27 15:36:10:515 588 768 to # displays notifications of recommended software (user preference)
2016-07-27 15:36:10:515 588 768 to the settings changed through the user's preference.
2016-07-27 15:36:10:516 588 768 AU successfully wrote event to THE health state: 0
2016-07-27 15:36:10:516 588 768 AU successfully wrote event to THE health state: 0To get Windows update works in 2016, install the June update client is necessary. It is only available as part of the monthly update rollup. It's July KB3172605, requiring pre-installed KB3020369. See:
Best regards, VZ
-
HP LaserJet Pro M1217nfw multifunctional stuck in initialization
I have printer HP LaserJet Pro M1217nfw multifunctional and he is stuck at the step of Initilizating. I have tried rebooting printer several times but he won't anyther. Each light flashes for a few seconds and the lcd displays init... message for some time and then the cycle continues.
My printer warranty expired 4 days ago and I can't buy a warranty either. Can anyone solve the problem?
Your help is very appreciated.
Thanks a lot for your help on above steps. There is no button GB LaserJet Pro 1217NFW. I tried all combinations of possible keys, but could not make the printer out of step initialization.
Howerver error led me to the stage where I started the printer and then removed the Toner Cartridge. You may need to wait patiently for a few minutes. This you have printer off-cycle of initialization of the error. After which, I inserted the cartridge in and the printer started working. However I had to redo the connectivity wireless with my router after that.
Until this printer and scanner are awesome to work wireless. Hope this helps someone who could face same issue.
-
Question of offset for the OSPF mtu
Hello
I have following cisco catalyst and OSPF running switches.
3750G (C3750-ADVIPSERVICESK 12.2 (25) SED1)
3750 X (C3750E-UNIVERSALK9-M 15.0 (1) SE3)
3850 (cat3k_caa-universalk9 03.02.01.SE)
They are all connected through the WAN L2 (192.168.40.x/24 star topology)
Link 3750 X 3850 does not state in its own RIGHT.
I think it's because that incompatibility of MTU.
3750G VLAN60 SVI mtu 1500
3750 X VLAN60 SVI mtu 1500
3850 VLAN60 SVI mtu 9198
But 3750G complain about anything whatsoever and stay a State COMPLETE and 3750 X 3850.
The output of the show ip ospf will tell about each switch is similar to the following.
3750G (ID: 10.10.11.1 IP address: 192.168.40.101)
Neighbor ID Pri State Dead Time Interface address
2.2.2.2 1 FULL/DROTHER 00:00:36 192.168.40.102 Vlan60
3.3.3.3 1 FULL/BDR 00:00:33 192.168.40.103 Vlan60
3750 X (ID: IP address 2.2.2.2: 192.168.40.102)
Neighbor ID Pri State Dead Time Interface address
3.3.3.3 EXSTART/BDR 1 00:00:36 192.168.40.103 Vlan60 (rehearsal EXSTART > down)
10.10.11.1 1 FULL/DR 00:00:30 192.168.40.101 Vlan60
3850 (address IP ID:3.3.3.3: 192.168.40.103)
Neighbor ID Pri State Dead Time Interface address
2.2.2.2 EXSTART/DROTHER 1 00:00:38 192.168.40.102 Vlan60 (rehearsal EXSTART > down)
10.10.11.1 1 FULL/DR 00:00:32 192.168.40.101 Vlan60
I think that if I changed the MTU on 3850 to 1500 (ip mtu) 1500, all seem to be OK.
But the question is why 3750G do not complain now.
Thanks in advance,
Taro
Simulated, but didn't work as I thought seems mtu must match, why 3750g worked with low mtu, I don't know. But like told u, or the other less than 3800 mtu setting or configuration ip ospf mtu - ignore the problem resolves.
Other expertise can feed some light to the behavior. bug in iOS?Sent by Cisco Support technique iPhone App
-
SQL Developer 4.1 stuck on loading for Mac
Hi all
I'm currently under Mac OSX 10.11.1 (El Capitan) and I downloaded SQL Developer 4.1. When you try to start SQL Developer it gets stuck loading, shown below.
JDK, I am running:
Java version "1.8.0_45".
Java (TM) SE Runtime Environment (build 1.8.0_45 - b14)
Java for 64-bit Server VM (build 25.45 - b02, mixed mode)
According to me, that it points to the right path of the JDK. When I run SQL Developer sqldeveloper.sh I get the following exception:
sqldeveloper.sh: line 4: cd: sqldeveloper.sh: not a directory
java.lang.Exception: stack trace
at java.lang.Thread.dumpStack(Thread.java:1329)
to oracle.ideimpl.MainWindowImpl. < init > (MainWindowImpl.java:166)
at oracle.ide.osgi.Activator.setupWindow(Activator.java:281)
at oracle.ide.osgi.Activator.start(Activator.java:135)
to org.eclipse.osgi.framework.internal.core.BundleContextImpl$ 1.run(BundleContextImpl.java:711)
at java.security.AccessController.doPrivileged (Native Method)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:702)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:683)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:381)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:390)
at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1176)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:559)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:544)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:457)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:243)
at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.internalStart(EquinoxLauncher.java:271)
at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.start(EquinoxLauncher.java:241)
at org.eclipse.osgi.launch.Equinox.start(Equinox.java:258)
at org.netbeans.core.netigso.Netigso.start(Netigso.java:191)
at org.netbeans.NetigsoHandle.startFramework(NetigsoHandle.java:209)
at org.netbeans.ModuleManager.enable(ModuleManager.java:1352)
at org.netbeans.ModuleManager.enable(ModuleManager.java:1156)
at org.netbeans.core.startup.ModuleList.installNew (ModuleList.java:340)
at org.netbeans.core.startup.ModuleList.trigger (ModuleList.java:276)
at org.netbeans.core.startup.ModuleSystem.restore (ModuleSystem.java:301)
at org.netbeans.core.startup.Main.getModuleSystem (Main.java:181)
at org.netbeans.core.startup.Main.getModuleSystem (Main.java:150)
at org.netbeans.core.startup.Main.start (Main.java:307)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:123)
at java.lang.Thread.run(Thread.java:745)
CD to your home directory of the user
go to the folder .sqldeveloper
Nuke or rename the system4.1.2... directory
try to run back to the top
He found java or you'd never get the Startup dialog box
You should be able to slide the .app into your Applications folder and run it directly from the doc vs launch of a shell/terminal
-
I created a node two CARS using 64-bit Linux. All installation i.e. Clusterware and software of database 11G R2 64 BIT went smoothly, but the DBCA is stuck at 85%. Below are the details of the log files.
Oracle@OL5-112-RAC1 RAC] $ tail-f cloneDBCreation.log
20 [email protected] (RECO) 1
21 [email protected] (RBAL) 1
22 [email protected] (FILIPE) 1
23 [email protected] (Intormatictns) 1
25 [email protected] (MMNL) 1
26 [email protected] (No.1)
29 [email protected] (O000) 5
30 [email protected] (O001) 2
32 [email protected] (QMNC) 1
AL16UTF16
Oracle@OL5-112-RAC1 RAC] $ tail postDBCreation.log
utl_recomp_end: 07:18:46
The database is closed.
The database is dismounted.
ORACLE instance stops.
ERROR:
ORA-12514: TNS:listener is not currently of service requested in connect descriptor
DB_RUNNING
1
1
[oracle@ol5-112-rac1 RAC] $ tail trace.log
[Thread-99] [STI 20:03:18.398 2014-03-24] [RuntimeExec.runCommand:164] https://OL5-112-RAC1.localdomain:1158 / console/em/aboutApplication
[Thread-99] [20:03:18.398 IST OF 2014-03-24] [RuntimeExec.runCommand:164] Oracle Enterprise Manager 11 g Database Control from... failed.
[Thread-99] [20:03:18.398 IST OF 2014-03-24] [RuntimeExec.runCommand:164]-
[Thread-99] [20:03:18.398 IST OF 2014-03-24] [RuntimeExec.runCommand:164] Logs are generated in the /u01/app/oracle/product/11.2.0/db_1/ol5-112-rac2_RAC/sysman/log directory
[Thread-99] [20:03:18.399 IST OF 2014-03-24] [RuntimeExec.runCommand:170] RunTimeExec: error >
[Thread-99] [20:03:18.399 IST OF 2014-03-24] [RuntimeExec.runCommand:192] Return of RunTimeExec.runCommand
[Thread-99] [STI 20:03:18.399 2014-03-24] NativeSystem.rununixcmd [NativeSystem.rununixcmd:1058]: RetString 0 | Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0 Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved. https://OL5-112-RAC1.localdomain:1158 / console/em/aboutApplicationStarting Oracle Enterprise Manager 11 g Database Control... failed. - Logs are generated in the /u01/app/oracle/product/11.2.0/db_1/ol5-112-rac2_RAC/sysman/log directory: failure of
[Thread-99] [STI 20:03:18.400 2014-03-24] [NativeResult. < init >: 91] NativeResult: the resulting string is0 | Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0 Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved. https://OL5-112-RAC1.localdomain:1158 / console/em/aboutApplicationStarting Oracle Enterprise Manager 11 g Database Control... failed. - Logs are generated in the /u01/app/oracle/product/11.2.0/db_1/ol5-112-rac2_RAC/sysman/log directory: failure of
[Thread-99] [20:03:18.400 IST OF 2014-03-24] [NativeResult. < init >: 99] The State channel is: 0
[Thread-99] [STI 20:03:18.400 2014-03-24] [NativeResult. < init >: 112] the resulting string is: Oracle Enterprise Manager 11 g Database Control Release 11.2.0.1.0 Copyright (c) 1996, 2009, Oracle Corporation. All rights reserved. https://OL5-112-RAC1.localdomain:1158 / console/em/aboutApplicationStarting Oracle Enterprise Manager 11 g Database Control... failed. - Logs are generated in the /u01/app/oracle/product/11.2.0/db_1/ol5-112-rac2_RAC/sysman/log directory: failure 1
Oracle@OL5-112-RAC1 RAC] $ tail emConfig.log
24 March 2014 20:03:18 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Env var 'TZ' value is 'null', throw the same
24 March 2014 20:03:18 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Env var "NLS_LANG" value is "null", take the same
24 March 2014 20:03:18 oracle.sysman.emcp.util.PlatformInterface getEnvProps
CONFIG: Back table cache env
24 March 2014 20:03:18 oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [BASE_PATH=/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin, CLASSPATH=/u01/app/oracle/product/11.2.0/db_1/assistants/dbca/jlib/dbca.jar:/u01/app/oracle/product/11.2.0/db_1/assistants/jlib/assistantsCommon.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/11.2.0/ db_1/jlib/help4.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/oracle_ice5.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/kodiak.jar:/u01/app/oracle/product/11.2.0/db_1/lib/xmlparserv2.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/orai18n.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/ldapjclnt11.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/ojmisc.jar:/u01/app/oracle/ product/11.2.0/db_1/jlib/oraclepki103.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/opm.jar:/u01/app/oracle/product/11.2.0/db_1/jdbc/lib/ojdbc5.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/srvm.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/srvmasm.jar:/u01/app/oracle/product/11.2.0/db_1/classes:/u01/app/oracle/product/11.2.0/db_1/jlib/oemlt.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/emca.jar:/u01/app/ oracle/product/11.2.0/db_1/sysman/jlib/emCORE.jar:/u01/app/oracle/product/11.2.0/db_1/oc4j/j2ee/home/oc4j.jar:/u01/app/oracle/product/11.2.0/db_1/oc4j/j2ee/home/db_oc4j_deploy.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/emConfigInstall.jar:/u01/app/oracle/product/11.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/11.2.0/db_1/oui/jlib/OraPrereq.jar:/u01/app/oracle/product/11.2.0/db_1/inventory/prereqs/oui/OraPrereqChecks.jar:/u01/app/oracle/product/11.2.0/db_1/oui/ jlib/OraPrereqChecks.jar:/u01/app/oracle/product/11.2.0/db_1/oui/jlib/OraCheckPoint.jar:/u01/app/oracle/product/11.2.0/db_1/jlib/cvu.jar:/u01/app/oracle/product/11.2.0/db_1/dv/jlib/dvca.jar, COLORTERM = gnome-terminal, CVS_RSH is ssh, DBUS_SESSION_BUS_ADDRESS = unix: summary = / tmp/dbus-adaf9CNM1D, guid is d3387d784624507fa8d3580053300ee1, DB_HOME=/u01/app/oracle/product/11.2.0/db_1, DESKTOP_SESSION = default DESKTOP_STARTUP_ID = , DISPLAY =: 0.0, GDMSESSION = default GDM_XSERVER_LOCATION = local, GNOME_DESKTOP_SESSION_ID = default GNOME_KEYRING_SOCKET = / tmp/Keyring-4JYBzj/socket, GRID_HOME=/u01/app/11.2.0/grid, GTK_RC_FILES=/etc/gtk/gtkrc:/home/oracle/.gtkrc-1.2-gnome2, G_BROKEN_FILENAMES = 1, HISTSIZE = 1000, HOME = / home/oracle, HOSTNAME = ol5-112 - rac1.localdomain, INPUTRC = / etc/inputrc, KDEDIR = / usr, KDE_IS_PRELINKED = 1, KDE_NO_IPV6 = 1, LANG = fr_FR. UTF-8 , LC_ALL =, LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/db_1/jdk/jre/lib/amd64/server:/u01/app/oracle/product/11.2.0/db_1/jdk/jre/lib/amd64:/u01/app/oracle/product/11.2.0/db_1/jdk/jre/... /lib/amd64:/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib:/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib %S, LOGNAME = oracle, LS_COLORS = no LESSOPEN=|/usr/bin/lesspipe.sh = 00:fi = 00:di = 00; 34:LN = 00; 36:PI = 40; 33: so = 00; 35 :bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31 :* .z = 00; 31 :*. Z = 00; 31: * .gz = 00; 31: * .bz2 = 00; 31: * .bz = 00; 31: * .tz = 00; 31: * .rpm = 00; 31: * .cpio = 00; 31: * .jpg = 00; 35: * .gif = 00; 35: * .bmp = 00; 35: * .xbm = 00; 35: * .xpm = 00; 35: * .png = 00; 35: * .tif = 00; 35:, MAIL = / var/spool/mail/oracle, NEED_EXIT_CODE = 1, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, ORACLE_BASE = / u01/app/oracle, ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1, ORACLE_HOSTNAME = ol5-112 - rac1.localdomain, ORACLE_SID = RAC, ORACLE_TERM = xterm, ORACLE_UNQNAME = RAC, PATH=/u01/app/oracle/product/11.2.0/db_1/bin:/usr/bin:/usr/bin:/usr/ccs/bin:/u01/app/oracle/product/11.2.0/db_1/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/ X11R6/bin: / home/oracle/bin: / grid_soft/database/install, PWD=/u01/app/oracle/product/11.2.0/db_1/bin, SESSION_MANAGER=local/ol5-112-rac1.localdomain:/tmp/. [ICE-unix/2674, SHELL = / bin/bash, SHLVL = 3, = 2749 SSH_AGENT_PID, SSH_ASKPASS = / usr/libexec/openssh/gnome-ssh-askpass, SSH_AUTH_SOCK=/tmp/ssh-mpFZGe2674/agent.2674, TERM is xterm, TMP = / tmp, TMPDIR = / tmp, USER = oracle, USERNAME = oracle, WINDOWID = 29398445, XAUTHORITY=/tmp/.gdmTU9QDX, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, XMODIFIERS=@im=none]
24 March 2014 20:03:18 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Begin execution: /u01/app/oracle/product/11.2.0/db_1/bin/emctl config emkey-remove_from_repos
SQL > select inst_name v$ active_instances;
INST_NAME
--------------------------------------------------------------------------------
OL5-112 - rac1.localdomain:RAC1
OL5-112 - rac2.localdomain:RAC2
SQL > select instance_name, host_name, status from v$ instance;
INSTANCE_NAME - HOST_NAME STATUS
---------------------------------------------------------------- ------------
Rac2 ol5-112 - rac2.localdomain OPEN
Please let me know how to solve this problem.
It seems that DB is created and part EM is facing problem.
You can configure EM after creation of the DB.
Check connectivity to the listener
-
Streams AQ: enqueue stuck on low memory
Single instance
10.2.0.1.0 standard
Win 2 k 3 32-bit.
For the last 2 hours, there are spikes of dark brown (Configuration) on the screen of the EM Performance every 5 minutes. When I click on higher activity, I see that the session is owned by SYS and program is ORACLE. EXE (MMON). When I click on SQL ID, Information has "the SQL statement is not available", but on the details - activity tab, I see "Streams AQ: enqueue stuck on low memory.
As far as I know, the db is set to automatic memory management and put us size max of the SGA. And we have not changed any settings recently.
Is this a problem? If so, what should I check next?
Thank you.MMON is a process in the background [url http://docs.oracle.com/cd/B19306_01/server.102/b14220/process.htm#sthref1626] running management tasks. It was new in your patch level, so it might have bugs. In fact, none 'could' to it. All bugs with this process are ironic, since there is self-referential humor in a follow-up process which does not work well, especially if it raises problems of monitoring itself.
So:
Look in your destination of bottom dump for files of follow-up with names like m * m0 * .trc. Look in your journal alerts for error messages. Patch to the latest patch level.
You do not see the SQL information because the process runs periodically and can't seem to be one that is reused well. I guess that you do not have a pool of flow defined in your init.ora, which means that the shared pool is used for something of streams. so this may be an indication that you have shared pool memory pressure.
Everything simply restart (or bounce Oracle) help? Some platforms have problems with MMON memory leak, so after a certain period of time, you could see this, simply because.
-
Stuck in the stage Listener entry in the DOUBLE OF RAC databases
I'm trying to reproduce a new db production db RAC RAC with RMAN.
I'm done with the following steps:
(1) prod backup database with rman
(2) copy init file and entries to not taking into account parameters of rac...
(3) create a password for the new db file
now, I'm stuck at step 4) create a static Earphone for your new database and reload the listener as the case may be.
This step is necessary because a double RMAN uses an auxiliary database which lies in no Assembly and therefore will not automatically register with the other as specified by local_listener, remote_listener and or by default, 1521.
For example:
(SID_DESC =
(GLOBAL_DBNAME = rman.colestock.test)
(ORACLE_HOME = u03/app/oracle/product/db/10.2)
(SID_NAME = rman2)
)
The foregoing is digital, that I got.
However I'm very confused here:
First of all, on the RAC server, I added entry sid at the bottom of the listener.ora. and the tnsnames entry looks like this:
ABC =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP (PORT = 1528))(HOST = xxxxxx76))
(ADDRESS = (PROTOCOL = TCP) (HOST = xxxxxx 77)(PORT = 1528))
)
(CONNECT_DATA =
(SERVICE_NAME = abc_service)
)
)
How can I add a sid entry in the tnsnames.ora file? Since I assumed first, create a single database not cars, what do I have to place name service_name or sid?
Another confusion is how to charge the listener? Since it is a RAC server, two nodes has two listenrs: abc_listener1, abc_listener2. I have to stop and start listner by svrctl stop the dynamic listener?
Please if you can, provide the procedure detailed here how create static listener tnsnames entry and entry of listener on a CCR environment and then reload the listener.
I have to finish the duplication of this weekend. So, any help will be greatly appreciated.
Thank you in advance.user569151 wrote:
I'm trying to reproduce a new db production db RAC RAC with RMAN.I'm done with the following steps:
(1) prod backup database with rman
(2) copy init file and entries to not taking into account parameters of rac...
(3) create a password for the new db file
now, I'm stuck at step 4) create a static Earphone for your new database and reload the listener as the case may be.
This step is necessary because a double RMAN uses an auxiliary database which lies in no Assembly and therefore will not automatically register with the other as specified by local_listener, remote_listener and or by default, 1521.For example:
(SID_DESC =
(GLOBAL_DBNAME = rman.colestock.test)
(ORACLE_HOME = u03/app/oracle/product/db/10.2)
(SID_NAME = rman2)
)The foregoing is digital, that I got.
However I'm very confused here:
First of all, on the RAC server, I added entry sid at the bottom of the listener.ora. and the tnsnames entry looks like this:
ABC =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP (PORT = 1528))(HOST = xxxxxx76))
(ADDRESS = (PROTOCOL = TCP) (HOST = xxxxxx 77)(PORT = 1528))
)
(CONNECT_DATA =
(SERVICE_NAME = abc_service)
)
)How can I add a sid entry in the tnsnames.ora file? Since I assumed first, create a single database not cars, what do I have to place name service_name or sid?
Another confusion is how to charge the listener? Since it is a RAC server, two nodes has two listenrs: abc_listener1, abc_listener2. I have to stop and start listner by svrctl stop the dynamic listener?
Please if you can, provide the procedure detailed here how create static listener in tnsnames entry and
tnsnames.ora contains no information on the listener.
entry of listener on a CCR environment and then reload the listener.
http://www.lmgtfy.com/?q=Oracle+LOCAL_LISTENER
-
load: oracle.forms.engine.Main not found stuck at loading Applet Java class
Hello
I recently installed App Server 10.1.2.0 on a new machine.
Copied all my forms on an appropriate directory. Implement formsweb.cfg to allow them to perform and attempted to run them.
Unfortunately, I'm stuck at loading Java Applet and screen in the status bar at the bottom that it is said:
load: class oracle.forms.engine.Main not found
I took a peek at the Java Console, and the 2 things that jump out to me are that it seems to be looking for a directory of forms90, which seems odd since I use App Server 10.1.2.0.2, and meaning of Forms Builder 10.1.2.0.2 should it be looking in a repertoire of forms not forms90 should - not?
And in addition, he mentions class without proxy, so now by browsing the forums it was suggested that put the details of proxy in jinitiator, what I did, but it made no difference either.
Can someone suggest something else please?
The Java Console log follows.
Thank you very much
Scott
Oracle JInitiator: Version 1.3.1.9
Using JRE version 1.3.1.9 Java hotspot Client VM
User home directory = C:\Documents and Settings\hilliers
----------------------------------------------------
c: clear console window
f: finalize objects on the finalization queue
g: garbage collection
h: display this help message
l: dump classloader list
m: print memory usage
q: Hide console
S: dump system properties
t: dump thread list
x: delete the cache of class loaders
0-5: set the level of trace to < n >
----------------------------------------------------
Listener of the unregistered mode
Removed the trace listener: sun.plugin.ocx.ActiveXAppletViewer [oracle.forms.engine.Main, 0, 0, 914 x 613, layout = java.awt.BorderLayout]
Sending events to the applet. STOP
Sending events to the applet. DESTROY
Sending events to the applet. HAVE
Sending events to the applet. QUIT SMOKING
Search for information...
Releasing the classloader: sun.plugin.ClassLoaderInfo@d9850, refcount = 0
Caching of classloader: sun.plugin.ClassLoaderInfo@d9850
Current ClassLoader cache size: 1
Fact...
Modality registered listener
Referencing of classloader: sun.plugin.ClassLoaderInfo@d9850, refcount = 1
Added the trace listener: sun.plugin.ocx.ActiveXAppletViewer [oracle.forms.engine.Main, 0, 0, 914 x 613, invalid, layout = java.awt.BorderLayout]
Sending events to the applet. LOAD
Sending events to the applet. INIT
Sending events to the applet. BEGINNING
Determine if the applet asks to install any HTML page
HTML Setup is complete.
Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
Http://appserver008/forms90/Java/Oracle/Forms/engine/main.class connection without proxy
Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
Http://appserver008/forms90/Java/Oracle/Forms/engine/main.class connection without proxy
load: class oracle.forms.engine.Main not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes (unknown Source)
in sun.applet.AppletClassLoader.access$ 100 (unknown Source)
to sun.applet.AppletClassLoader$ 1.run (unknown Source)
at java.security.AccessController.doPrivileged (Native Method)
at sun.applet.AppletClassLoader.findClass (unknown Source)
at sun.plugin.security.PluginClassLoader.findClass (unknown Source)
at java.lang.ClassLoader.loadClass (unknown Source)
at sun.applet.AppletClassLoader.loadClass (unknown Source)
at java.lang.ClassLoader.loadClass (unknown Source)
at sun.applet.AppletClassLoader.loadCode (unknown Source)
at sun.applet.AppletPanel.createApplet (unknown Source)
at sun.plugin.AppletViewer.createApplet (unknown Source)
at sun.applet.AppletPanel.runLoader (unknown Source)
at sun.applet.AppletPanel.run (unknown Source)
at java.lang.Thread.run (unknown Source)Hello
What did you put in the tag to archive your formsweb.cfg file?
François
Maybe you are looking for
-
Hello, I want to know fast and easy to add CC? without type and type of all time
-
The lack of notification Center
I'm under El Cap 10.11.3 (unfortunately) on an iMac 27 end-2011 ", but I think that this problem exists in the Yosemite Park and perhaps even further. I see the icon in the menu bar above to the extreme right to Notification Center and have the Notif
-
Unable to play the game: wheel Watchers after installing Internet Explorer 9
Since I downloaded IE9, the game I'm playing wheel watchers Since I downloaded ie9, the game, I'm playing observers of wheel / sony no longer works on this computer or my lap top the program turns on but the puzzle and wheel game will not load. When
-
transfer files to another user of the account of the same computer__
How can I transfer files / folders from another user, but the same computer account.
-
Problems of vertical scrolling
I have a problem with my screen of scrolling. I am trying to achieve: Some data some data some data Some data some data some data ----------------------------- Insert here the log data scrolling Insert here the log data scrolling Insert here the log