HP LaserJet Pro M1217nfw multifunctional stuck in initialization

Similar Questions

• LaserJet Pro M177FW MFP: Laserjet Pro MFP M177FW stuck in initialization

  I bought a LaserJet MFP M177fw Pro a few days, and during installation, he immediately found himself in initialization mode. I tried to restart the printer and reinstalling the drivers, which are correctly installed according to my computer. It is plugged directly into a wall of output, not a surge protector and I have tried unplug, wait a minute and reconnecting.  I tried to update the firmware, but the installer think that the printer is in error mode and will not go forward. I scoured the forums HP but was not able to solve problems more.

  The scanner works fine when I said to scan from the desktop, then the computer and the device is certainly speak to one another.

  In addition, the printer is supposed to make a loud click and rapid when it is turned on?

  Thank you!

  Hi @SSI_Diver,

  Thanks for providing this information. You can Contact the Support HP to inquire about the service. Check the model number and the form to receive a file number for faster assistance. Thank you.

• LaserJet Pro M1217nfw booting is not after the firmware update

  Hello

  My configuration:

  HP LaserJet Pro M1217nfw (USB connection)

  MacBook Pro (mid-2012) running OS X Lion 10.7.5

  My Odyssey:

  The HP scanning software included on the CD is rudimentary to say the least. In particular, it don't will not let me scan multiple pages and combine them into a single PDF file.

  Tried to scan printing & scanning with ImageCapture, an excerpt, and the pane in system preferences: they see any of the MFP.

  Uninstalled HP, reset printing system software, downloaded and installed http://support.apple.com/kb/DL907 according to the instructions on http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Mac-Lion-Scanning-Multiple-Docs/m-p/159... no luck.

  Downloaded and installed the latest HP software http://ftp.hp.com/pub/softlib/software12/COL32660/Im-80903-6/LJM1130_M1210_MFP_Full_Solution.dmg

  Installation goes OK, then asked the installer to update the firmware of the printer and I foolishly said yes.

  Result: the printer will not be in service longer. At the start, it displays "then to initialize... "with the Green (ready) and amber (caution) of fires, then LCD turns off, then"initializing... ". "all over again, to infinity. Needless to say that the HP software or the Firmware utility see the device more and in system preferences, it is listed as "offline". In a Word, it is bricked.

  Of course, I could use some good advice. Thanks in advance.

  Solution in another thread:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/LaserJet-Pro-M1217nfw-non-functional-after-firmware-upgrade/m-p/2323767#M36922

• LaserJet Pro M1217nfw not working after firmware update

  Hello

  LaserJet Pro M1217nfw connected via USB to the MacBook Pro (non-retine, mid-2012) running OS X 10.7.5

  [Already posted this three days ago, but no solution - Experts hope sounds...]

  A few days ago, I downloaded and installed the latest version of the HP http://ftp.hp.com/pub/softlib/software12/COL32660/Im-80903-6/LJM1130_M1210_MFP_Full_Solution.dmg software

  The installation goes OK, then asked the installer to update the firmware of the printer and I said yes. The installer of the firmware reported success, but now the printer will not be in service more. At the start, it displays "then to initialize... "with the Green (ready) and amber (caution) of fires, then LCD turns off, then"initializing... ". "all over again, to infinity. Needless to say that the HP software or the Firmware utility see the device more and in system preferences, it is listed as "offline".

  What should I do? Is it possible to re Flash the original firmware? An updated firmware supposed to break things like that anyway?

  Thanks in advance for any help.

  Marels,.

  That's what I did:

  Hold [Cancel] and [right] button (there is no [down] key on the M1217nfw)

  Put the unit on

  Indicator light flashed and LCD displays "Permanent storage init" (whatever that means)

  -Ready light has stopped flashing and LCD asked "language?

  Out buttons and proceeded to the initial installation of language and regional

  LCD displays "Ready" - printer working again!

  Thank you and Kudos to you and MBJustice for your personal commitment.

  DG

• HP Laserjet Pro M1217nfw, in-home ePrint & Biz on Android devices

  Got my new LaserJet Pro M1217nfw installed on my home (secure) wireless network and am 3 laptops wireless printing windows.

  Started trying to get my smartphones to connect and print. Verizon droid X, Verizon update running last gingerbread. Download ePrint and ePrint home & Biz to him. Updated my printer to the latest firmware and SmartInstall, got an e-mail address EPrint are entrusted to him. Am able to ePrint phone just fine, but home & Biz does not print, it detects the printer and said has printed the file, doc or pic, but nothing comes out on the printer. I see your list of printers is not supported

  supported on th 1217nfw. He plans to work on it in the future? Can give you my some advice or workarounds if it is possible to return home and Biz to work?

  I tried the service wirelessly directly on the printer, but don't really understand its purpose, as my phone and printer are both

  connected to my local wireless network, why live wireless using a different SSID and assign an IP fixed?

  in any case disabled this feature.

  Thanks for any help!

  Since both printers are capable ePrint and wireless printers, it is possible to print from your Android phone.

  To do this make sure that your printer and your phone are both connected to the network. Download and install the free ePrint home & Biz application from the Android market.

  If you have followed the manual above, it should be a quick process to be able to print from your phone.

  However, if you're having trouble feel free to call online services ePrint at 855-785-2777.

  I hope this helps!

• Color Laserjet MFP M176n Pro: Color Laserjet Pro MFP M176n stuck on initializing, Toner carousel will not go

  Hello

  Our Color Laserjet Pro M176n MFP is stuck at initializing, since the last time that the yellow toner cartridge has been replaced. After the replacement of the cartridge, the toner carousel turned, started making rattling noises and then stopped. She does after every start. It seems that there is something blocking the movement of the carousel, since I can't move it even manually as described in of many other forum posts on similar problems. Is there a way to access the back of the carousel to see if there is something blocking it from moving?

  Thanks for letting me know @samuelm.

  I don't see any other way to access the tonics. The printer will need to be repaired. Thank you!

• LaserJet Pro M127fn MFP: Stuck "print fax page 1.

  I had to receive two pages of fax. After that the first page has come through it is stuck "print fax page 1. The second page is never good. I can't print anything. I already disconnected my printer and plugged in. When the rear connection, it uses the same throughout first fax page and gets stuck again. Happen from nowhere at least once a week for the past few weeks.

  Hi @cvsc ,

  I see that you are having problems with the printer stuck in an "Print fax page 1" error message when you restart the printer, it keeps printing the same fax. I would really like to be able to help solve this problem.

  I would like to do a hard reset to see if that will solve the problem. It's probably a little different then what you have already tried.

  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I would say for updating the firmware of the printer. Here is the link just choose your operating system and select the firmware download. HP LaserJet Pro MFP M127/M128 series Firmware update.

  If you're still having problems, try to reset the printer. I'll send you another step to try in a private message to try.
  In the forum next to your handle name simply click on the envelope to see.

  If you need help, let me know.

  Good day!
  Thank you.

• LaserJet Pro M127fn MFP: Stuck on "Print Fax Front Page.

  This MFP is stuck with the message, 'Printing Fax Page One' I've tried the reset instructions are on the forums, but cannot get rid of this message. Is there a reset 'hard' or 'factory' I can do? Thank you

  Hi again,

  I would say for updating the firmware of the printer.

  Here is the link just choose your operating system and select the firmware download.

  HP LaserJet Pro M127 MFP series Firmware update

  Make sure that you scroll to the Firmware section.

  See if that helps

• Printer HP LaserJet Pro M1217nfw all-in-One - scan to Email/PC

  I'll have a chance to get my machine to scan documents from the scanner to every email or save to PC, it used to work, but now does not work? I reinstalled the drivers yesterday but still no luck.

  The site of HP support for the M1217nfw of Laserjet Pro features of a "Doctor print and Scan" utility which can help: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03287318&cc=us&dlc=en&lang=en&lc=en&product=4075472
  There is additional support at: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=4075472&

• Color LaserJet Pro CM1415fnw multifunction - print that hangs or restarts printer after the print request

  I am using a LaserJet Pro CM1415fnw with a wireless connection and a USB connection, for several years with my MacBook Pro, spanning several evolutions of the Mac OSX (Mountain Lion, Lion, Mavericks) without incident.

  Today, no reason apparent, the printer started to expose the problems of processing printing orders sent, through the wireless and via the USB port.

  When you try a wireless connection, the print queue to fill up and the LCD will display printing in progress (with no impression caused), then the screen would just whiten and the printer would appear to restart, with the HP logo, and then subsequently return to the normal display mode, as if she was ready to print or copy, no matter.   No printing would take place, and the print queue would remain as if there is a current print job, with no impression caused.

  When you try to use the USB connection, the print queue indicates that a print command has been sent to the printer, but then, he did the same wireless, with the LCD screen goes white and apparently to restart the printer.  The print queue is populated, but printing never takes place.

  I have reset the printing system several times, removed and reinstalled the printer several times (wireless W USB connections), use the HP utility to try to install the printer, download and install the latest version of the driver for the device, rebooted the MacBook Pro, etc, etc.

  The ONLY thing that can print at this time is if I use the HP utility software, and receive information from device and then use the PAGE printing CONFIGURATION - then and then only, the printer responds immediately and prints the page, just as it was always in the past (until now!).

  I have tried everything I can think, for several hours, and can not understand what the problem might be.

  Any idea to solve this problem would be greatly appreciated!

  Norman,

  Thank you for your constant perseverance on this issue.  I forgot my post here, until I received a notification today about your response to date.

  Curiously, I "stumbled" upon the cause of the problem recently, and he had NOTHING to do with the printer or the MacBook Pro OS X (recently updated to Yosemite).

  It turns out that the problem was in the PDF file that I was trying to print!  Periodically, I'll print PDFs to a particular Web site, and it is these PDF files - exclusively - who made the mistake of communication between the computer and the printer.  The problem with PDFs is unique to the Mac OS X, because I can print the exact same PDF files from my laptop running Windows without problem.

  I have no idea what the "Bug" in the East of PDF files... probably never is, but given that I can do what I need to do with a Windows laptop, my problem is solved.

  I contacted the Admin on the website where I was printing the PDF files they offer, to make them aware of the situation.

  Thank you for your interest and your help!

  Dave

• Printer HP LaserJet Pro M1136 multifunctional scan quality

  Name of the product - MFP HP LaserJet Pro M1136
  Product number - CNGTD4CJLC
  OS - Windows 7
  ERR Msg - no
  All the changes made - no. This is a brand new and 7 days of the cardboard box.

  Recently, I bought a LaserJet M1136 MFP printer. Printing works fine. However, the quality of scan is very poor. In particular the written document scanning gives VERY VERY bad results in quality. This product comes with ReadIrIs product for scanning.

  However the native scan and ReadiRiS does any good in terms of improving the quality of scanning.

  I tried scanning documents with the recommended 300 dpi. Also, I used only B & W and grayscale for the tests.

  Appreciate if you have any solution to improve that.

  Fantastic, I'm very happy to hear that everything is resolved.

  Have a wonderful day!

• My MFP HP Laserjet Pro M225dw is stuck on logo HP "initialization".

  I have the same problem, the printer will not complete the power on the initialization sequence.

  Gemini02

  It seems I owe you an apology... unless your last instructions work apparently.

  I had not thought that the printer would react on the network if it was still initializing.  To me that sounds like he is yet to start, but I guess that networks was on before it got stuck.

  In any case, this afternoon that I turned on the printer back, plugged into the USB on my HP Envy 17 t, downloaded the updated firmware June 2015, he ran, he updated the firmware of the printer and the printer restarted and got thorugh to the homescreen on the screen.

  Then I configured for my home wifi network and it attached to my router.

  Then I opened the EWS page and left the IPV6 and changed to static IP address.

  Jolly good so far.  Now I can try the electric bike on the printer several times and see if it remains functional as expected.

  

  # 1 power cycle: OK

  Cycle 2 # power: OK

  # 3rd power cycle: OK

  power cord removed 15 minutes

  # 4 power cycle: OK

  So now, it seems to work.  I can't understand why the HP Chat person said if go, they could not help, wouldn't do anything.  Made me give up and replace it with a brother who works really well and seems a lot more elegant than the M225 although it has better file (print speed, duplex scanning) and still has all the other features of the M225... and it cost less than $ 150.  Don't know why HP continues to be #1 with brother beating develop products and price, and I must say that I am impressed with their email ollow-up top and providing support tools and a willingness to make me happy... so better service than HP as well.

  Hmm, I guess I have enough negative look on HP.  Sorry if this colors your enthusiasm for HP.

  Thank you for your persistence in getting stares upward.

  Kind regards

  ... Patrick

• HP Color Laserjet pro mf m177f: stuck on Intializing

  Hello from the Germany,

  Unfortunately my new printer is stuck on initializing. I read a few solutions but they didn't work (hard rest) and I also turn around the cartridges for example black on the front but the printer was still saying that I should turn black to the edge. I don't know what to do now.

  I hope you can help me and sorry for my bad English

  Sincerely

  Firstly unplug everyting the printer except the power cord and turn on the printer.  If it comes to prepare this way, you have a bad printjob causing the printer to initialize time and time again.  If still the same problem do reset below.  If this does not work, then your trainer is bad.

  The NVRAM initialization
  Perform initialization of the NVRAM resets the settings and the following information:
  ● all the menu settings are reset to the factory default values.
  ● all location settings, such as language and national and regional, are reset to zero.
  ATTENTION: All integrated network settings are also reset. Don't forget to print a page of configuration before
  restore the default values. Make a note of the IP address that is listed on the Jetdirect configuration page. You could
  you want to restore the IP address after the NVRAM initialization.
  After a the NVRAM initialization, reconfigure all computers that print to this product. Uninstall and
  then reinstall the product on computers software.
  1. turn off the product.
  2. press the right arrow key. Hold this button you turn on the product.
  3. where a Permanent init storage. appears on the screen, release the arrow button to the right.
  When the product has completed the NVRAM initialization, it returns to the ready state.

• LaserJet Pro m477fnw multifunctional printers: clearing paper jams

  We have a rear door paper jam, but can not reach the paper - the paper is too small and too deep inside the printer.  How can we delete this?  Thank you.

  If you have access to a service manual, then you'd be able to find concrete steps to clear the jam.  We can link to the Service manuals on open forums, but you can find floating around on 3 sites of third parties.

  Otherwise, I would suggest integrating the printer a HP support certified area.  They can make the most complex repairs for you.

  You also have the possibility to communicate directly with HP support if you have the remaining warranty on the printer.  If a representative of phone you can't walk through the process on the phoen they may be able to send a tech or swap on the printer for you according to the seriousness of the problem.  Standard stuff for warranty support for the machines.

• Use the CD to install a printer on your Mac - HP LaserJet Pro M1217nfw wireless

  
  

  I hope this video helps. I would like to know if anyone has any questions.