OTP-S590 chapters & mkv

Similar Questions

• OTP-S590 remote code question

  Just set up my S590 and it works very well.

  I have connected the S590 to my stereo system to Sony DAV - FC7 (via composite) for which I lost the remote control.

  The remote control for the media player that I used until I'm the S590, who was a Philips DVD player with USB connection, allowed me to control the levels of the audio output of the player. This is possible using a custom firmware.

  Now the remote S590 has a volume knob and I have a few questions:

  1. can I program the remote S590 to control the volume of the composite output of the S590 itself?

  2 of universal remote would. what type you recommend which allows me to use the S590, DAV - FC7 and my Sharp TV?

  Thanks in advance!

  Hello Tom

  The volume button on the Blu - ray player's remote control is used to control the TV volume.
  The player's remote control cannot be programmed to control the volume of the car radio.

  You can use the code 18 to program the supplied remote control to the player to control the Sharp TV.

  To buy a universal remote, you can contact the nearest Sony dealer.

  Kind regards

  Colby

• HDCP issues OTP-S590 vidoe by STR-DH830 playback blu - ray disc playback. OK with dvd

  When I play a blu - ray disc BDP-S590 blu ray player through a STR-DH830 video whites there an HDCP problem. Is it possible to disable DHCP. It only happens when I play a blu - ray disc. When I play a DVD disc, there is no video cutting.

  Hello Gary,.
  Welcome to the community of Sony.

  Disable the [HDMI Deep Color output] in the BD drive and check if it helps.

  See the following link for possible troubleshooting steps.

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C567099

  If my post answered your question, please mark it as an "accepted Solution".

• OTP-S590 Netflix

  I have a BDP-S590, before tonight, connected to Netflix without problem.  Tonight, when I turned on and selected Netflix it checked the network connection, and then went to the red Netflix screen where he landed.  After 10 minutes, I turned off and turn it back on, now, when I select Netflix in the menu, the screen goes black and nothing happens.

  The device behaves as if he's locked up; None of the buttons on the player itself or the remote control will do anything.  I can't stop the player with the remote control or the power button, I have to disconnect the drive.

  I can connect to the Amazon and the video stream without any problems, so it is related to Netflix.  I have reset the unit to default settings, nothing helped.  The network connection is excellent and I had no problem until tonight.

  Anyone have any ideas?

  Awesome!

• OTP-S590 - t - it support youtube Iphone matching

  
  

  Hey Bella,

  You can try to use the Media Remote app for iPhone and can use it to control you tube App. information relating to this application is available on below mentioned page:

  https://iTunes.Apple.com/en/app/media-remote-for-iPhone/id373459732?Mt=8

  More information:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1031150

  If my post answered your question, please mark it as "accepted Solution".

• OTP-S790 does not play. Server DLNA MKV files

  Hi all

  I have a Western Digital MyBookLive NAS drive and I copied all my. MKV and. MPG files. I can play. MPG files using the PS3 and BDP-S790, but not able to play. MKV files. Is this common? In the forums, I have seen that two of them should be able to play. MKV files on Server DLNA network. One has faced this problem?

  Thank you

  Rama

  Hello

  In fact, I solved my problem with the Synology NAS and the fact that it worked with the WIFI connection and not with the ethernet connection.

  To use the S790 as a streamer with a Synology NAS media, it is necessary to do the following on the Synology DSM software:

  -Open the multimedia server on the DSM (via the drop-down list at the top left).
  -Select DMA compatibility, then list of devices from this tab.

  -Declare S790 as a default

  The problem is that the S790 has two different addresses, one when it is used with a wifi connection and another when it is used with the ethernet connection! So the solution is to do the above for both mac addresses.

  Everything works as it should, and I can stream the NAS .mkv files.

  François

• Need help with chapters and playback of Blu - Ray Encore CS6

  I did all the digging I can find but cannot offer the best solution for my situation.

  Overview of the project:

  We filmed a price of the evening with a master of ceremonies and several speakers. Also part of the evening was a video introduction to the last winner. We try to produce a Blu - Ray highlighting each speech winners.

  Assets:

  -Main Menu (links to 3 submenus and a Play All)

  -Menu 1 (links to the speech of 2 person)

  -Menu 2 (links to speeches of 2 people)

  -3 menu (links to 5 some speech) as well as a link to the Menu 4

  -Menu 4 (links to 5 individual speech) as well as link to Menu 3

  -Video/audio files (mkv/wav) include one for the largest part of the ceremony, one for the introductory video for the final speech and closing

  I put videos on the same timeline with points of chapter for each winner. Initially, I had put the end to each chapter point actions, the next chapter to read. Navigation everything worked perfectly, but as I saw other post, there was a delay between each chapter when the Play All option.

  I have removed all chapter of the actions of end points, but maintained the attribute override on the menu buttons. The video plays without fault of a chapter to another. Individual interventions worked in preview mode, if I clicked on the action icon end that it would return to the menu, but if the entire chapter was cleared to play, he would settle in the next chapter, as if there was no substitution. I think that there may be no alternative if there is no existing action end actually substitute.

  I have seen discussions on chapter playlists, and I tried to apply with no luck either. Do I need to set up 14 chapter playlists to use if someone wants only to see speeches from people?

  So all this makes no sense, please let me know if I can get the result I'm looking for with the way I currently have put things in place. Or maybe I need better information on how to implement the chapter point...

  Thanks in advance.

  Mike

  If you have a scenario, the game all is simply a button link to this timeline. In the alternative scenario, where each winner (and an intro and whatever else) are on a calendar separate, a playlist (nonchapter) can be used to the game all the (or any other combination).

  I think we're on the same page, but it bears repeating: a reading list "chapter" consists of chapters of the single mounting. A "Playlist" includes timelines or slide shows or other playlists or chapter playlists.

  You seem to be well, but an alternative to a situation that avoids multiple videos on a timeline would be 3 timelines, one for each m2v. The game all would be a playlist with deadlines 3. The chapters would be playlists chapter (single) (which you have now) - but some chapters are different deadlines. No advantage or disadvantage here.

  In some cases, videos don't play well together on the same timeline. I think it's mostly because the sound has problems when butted other audio data.

• Only show the first page of the chapters and expandable pages

  I just downloaded a book and its showing only the first page of a large number of chapters. When I arrived at the end of the first chapter (if it is still in the right order) he repeated the same page several times. From there, the next 4 chapters were only the first page of each chapter. Is it possible to fix this? What is the cause? I closed iBooks repeatedly, I restarted my phone several times, whenever it is the same.

  Have you tried to delete the book and it redownloading via the bought? If it's that the same are all recent comments mentioning the same problem? If it's a recent purchase, you could contact iTunes Support: http://reportaproblem.apple.com

• No chapters after compressor export?

  Hi people,

  I'm editing old family 16mm film to a customer in a SD NTSC file.

  The file is modified with several chapters (16 or almost) fully finished.

  I exported a file of format prores FCX.  I'm doing this because I also give customers a larger file for self change later if they want.

  I drop this file into compressor and choose for preset HD H264. Voila, files look great and its water use.

  The only problem is that the chapter markers do not appear in the final .m4v file!   I see them in the window of the compressor after you import the file.

  If I use the 720 p HD file, contains the resuling .mov chapter markers.

  M4v files, I find, are more compatible with Windows computers and Mac - well, at least the customers don't need to install something more to see.

  I use a compressor on 10.10.5 4.2.2

  Any idea or wisdom would be greatly appreciated.

  See you soon,.

  Brian

  Keebler says:

  The only problem is that the chapter markers do not appear in the final .m4v file!

  Not sure I understand.

  Do you mean that the markers do not translate to PC video applications? I can't duplicate what you describe on Mac.

  And don't you think that the m4vs are more cross-platform easy as MP4s?

  Russ

• Choose the single chapter or chapters - disk space?

  Hi Gang

  I use iLife 08 - iDVD 08 and responsible for some older models as well. I have a 95 minutes, (burn single face) piece, which looks nice using the 'professional framework. Currently its a long chapter about 95 minutes long.

  I know I can break up the longest play in several chapters of void and put them on the menu, (it is no problem). What worries me is if I have enough disk space, (keep a burn single sided), to include 'Play a whole movie', in addition to including the sup chapters? If its mathematically adding the length of the total room for smaller pieces, no I don't think that will work? It seems, the total length will become prohibitive for a burn single sided. And BTW, all movie clips are exported "referenced files" and not "independent".

  By keeping the side burn 'one' (duration: 95 minutes), I think my options are:

  Stay with a long piece, or use 'DVD Studio Pro' which would require some time long tutorial...

  Any other ideas?

  Thank you!

  Where the 95 minute clip of?

  You can add chapter markers to a given interval with iDVD, i.e. at intervals of 5 or 10 minutes to your current project without having to exceed the 95 minute playing time available to you.

  1 - Select the movie from the main menu

  

  2 - Select the menu option Advanced ➙ create markers chapter for the film .

  

  3 - Select the time interval for the chapters.

  

  4. double click the movie button in the main menu to get this submenu:

  

  5. double click on the scene selection button to get the chapters:

  

  The downside to this is that you can choose a time interval and not a specific point in the movie for the marker.

  Otherwise, import the movie into iMovie or some film editing app that you use and add the markers where you want there.

  

• Chapters not no projection in QT 7 cinema

  The chapters are in Final Cut Pro X, but when I create a MOV file master (with selected chapters), but do not show in the right corner of the film 7 QT.

  David

  Works for me. Of course, you did the chapter markers? Is not a chapter marker at the beginning? Not too close together?

• Create chapters in PDF format using the preview

  I wrote a series of eight episodes, which are contained in separate PDF files eight - one for each episode. I combined these PDFs into a single PDF using Preview. The problem is that when I combine PDF files, I can drag each new PDF below the threshold in the sidebar in the preview to keep each stand-alone episode and each episode listed as a different 'chapter' in the single PDF file. However, when I export the file, it only exports the selected PDF, not all 'chapters' in a single PDF file. Select all pages and export do not work.

  If I drag the PDF files above the line in the sidebar, it allows me to export all eight PDFs as a single PDF file, but I lose the "chapters", and it is just there as a PDF constantly scrolling isn't easy to navigate between each episode.

  I want to create a single PDF containing all eight episodes, which, when opened displays each episode in the sidebar so that the player can pass quickly and expand/collapse each episode without having to scroll through the entire document.

  Does anyone know how to do this (or if it is still possible) using an extract? I also have Adobe Acrobat X installed if someone knows how to do it in this program.

  Thank you!

  Try something like PDFpen to create and add the table of contents with hyperlinks.

  https://smilesoftware.com/PDFpen

• Impossible to download the mkv online

  I went to a website to download a video file mkv recently, but there is an error indicating that the video file no is not corrupt and unable to play.i have downloaded via the website using firefox for the past few weeks until recently, it has become as aid so.pleaae.

  You should still be able to record video via "Firefox/file > save the Page under" or possibly via the context menu.

  • bug 835381 - Matroska MKV video files are not WebM - do not try to read

  (please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)

• Update Firefox, now I get an error when you try to open the .mkv files, but not other video files

  I created an html page of cinema at home with links to movies on my hard drive. I have two types of links or href = 'file:///C:/Media/movies/Looney Tunes/MainMovie/Vol 1 Disc 3/VIDEO_TS/VIDEO_TS. IFO' for normal DVD or href = "file:///C:/Media/movies/Blu-ray/Lorax/mkv/THE_LORAX/THE_LORAX.Title800.mkv" for blu - ray. Both have worked fine (click on the link and the movie starts to play with Media Player Home Cinema) for a few years until what I recently upgraded to firefox. The .ifo files still open as usual, but now blu - ray links take me to a gray page that says "Video cannot be read because the daughter is corrupt" with a large "X" over it. If I open the html page in Internet Explorer and click on the link, it works very well (blu - ray opens by using Media Player Home Cinema). Also, if I directly open the .mkv files, they play very well (open using MPHC). Thanks for any help!

  Change your links to include the attribute type with the value of video/x-matroska . Example:

  <a type="video/x-matroska" href="file:///C:/My%20Videos/Cooking/Making%20Gingerbread.mkv">How to make gingerbread</a>

  • https://developer.Mozilla.org/en-us/docs/HTML/element/a

  I also used to get the same behavior with files from web sites, when I had the extension of InlineDisposition installed.

• Better way to produce a video made home for ATV 4 (with chapters)?

  Hello world

  I tried to gather various pieces on this issue from various sources on the net, but either the info is outdated or not detailed enough... and as I'm considering buying an Apple TV 4, I get this response before I actually go out and spend money.

  So what I want to achieve is rather banal, I think, but somehow, there seems to be not exactly simple.

  So here go us:

  I have a whole bunch of video clips recorded with my camcorder (about 50-60 m2ts files, adding up to more than 3 hours in total length) during my last vacation, I want to cut a movie. This film should have marks of chapter pointing to these points of departure from the old clip. Finally, I would like to watch the movie (located on the drive of my iMac Fusion) via LAN streaming on Apple TV. The detailed questions are:

  1. What better software use to cut and the chapter? The latest version of iMovie or Adobe Premiere elements 14 (I) will do the job or I need Final Cut Pro? Of course, it would be cool if the chapter information could be automatically when adding clips to the timeline. Also, I heard of small but useful tools such as mChapter and Subler to set chapter marks later, but this seems rather tedious for me considering the fact that I have my original material is clips of 50-60...

  2. What is the best output format that gives the best playback quality and which preserves these chapter markers for playback on the ATV 4?

  3 Apple TV 4 actually does support selection chapter during playback at all? I read conflicting statements on the management of chapter in ATV 4... also on the ability to simply jump back through chapters...

  4. How would the final movie playback using Apple TV 4 actually work? Do I have to import my movie in my library iTunes first? Or just point to a folder on my iMac, which contains the final video file the ATV? How about using third-party software to do this (I hear there VLC for tvOS now for example)?

  5. Finally: is there or is there not the possibility of maybe having tiles for these chapters? I hear too many contradictory statements on this topic...

  In fact, my first idea was to create a structure of Blu - ray files on my iMac and streaming as the entire structure of the Apple TV, including all chapter marks and even the menus, but even if it seems possible with an application called Kodi for Apple TV (and, of course, Kodi ONLY), it doesn't seem to be too convenient , so I'm ready to switch to a single movie file, but as there is no support for the Nice menus etc. with this method, at least with chaptering should be possible...

  Thank you 1000 times for your tipps - and sorry if my questions are quite long...

  Best,

  Gero

  Let me make some suggestions on your project.

  A 3 hours long House holiday video with 60 chapters seems a bit long and tedious to watch let alone navigate.  Instead of thinking about the ATV4 at this point, I would say that you begin a project in iMovie and try to combine and edit your images.  Once you get the film edited, titled and is passed to your taste, I then worry about adding chapter markers.  You can always export the images in standard formats and use other software to make the last piece, if necessary.

  I think the experience of editing will make you rethink a 3 hour movie.  I think that you will eventually consolidate your images into shorter individual movies who can and who would be much more manageable and funner to watch and the need for the chapters will be moot.

  I played with iMovie and iDVD since they were created and have come to understand that less is indeed more when it comes to home movies.  When you actually edit any tips and tricks of grade b and capture the keyframes, it usually is pretty short and captures the moment without losing interest.

  I really appreciate the real work now in a movie - not the interim and images but do the editing.