OUD in Solaris Intel Architecture

Similar Questions

• 11 GR 2 install Solaris

  Hi Experts,
  
  I'm tryning to create a database using scripts in Solaris Intel;
  
  The CreateDB.sql script failed with;
  
  "SQL > startup nomount pfile="/u01/app/oracle/admin/db/scripts/init.ora ";
  ORA-27102: out of memory
  Error on Solaris-AMD64: 22: invalid argument
  
  I have a server with 16G memory and in the init.ora file I put as follows;
  
  ###########################################
  # Various
  ###########################################
  compatible = 11.2.0.0.0
  diagnostic_dest = / u01/app/oracle
  SGA_TARGET = 8g
  pga_aggregate_target = 1 g
  
  and;
  
  -bash-3, $00 cat/etc/project
  system: 0:
  User .root: 1:
  noproject:2:
  default: 3:
  Group.Staff:10:
  User .Oracle: 100:Oracle:Process.Max - SEM-nsems =(priv,2048,Deny); Project.Max - SEM - IDS =(priv,4000,Deny); Project.Max - SHM - IDS =(priv,32768,Deny); Project.Max - SHM-Memory =(priv,8589934592,Deny)
  -bash-3, $ 00
  
  
  
  Why I have this error? Appreciate your help
  
  Published by: 871552 on there / 09/2011 02:32

  check http://blogs.oracle.com/mandalika/entry/oracle_on_solaris_10_fixing

• Forum has failed

  Why is the forum always been low lately? I have a lot of post back :(
  
  It is powered by sunsparc, the fastest microprossor? : D
  
  
  Thank you

  I did say that Oracle Linux (OL) can be installed on SPARC. I said that the simple marketing response is to use Solaris on SPARC (Solaris Intel processor is trolling and lack the support of Oracle) and use Linux for Intel/AMD (Larry hired a few waves to OL provision on SPARC, but nothing to my knowledge is still available).

  So Oracle is no at this stage do not have a conflict between Solaris and OL marketing. These operating systems use different platforms h/w with different CPU architectures.

  Yes, you can install Linux on SPARC (there are kernel builds for this CPU architecture). Yes, you can install Solaris on Intel (earlier version is available for this CPU architecture).

  In both cases, however, there is next to nothing to install and more. S/w like Apache, RDBMS Oracle, mySQL, PHP, Perl, Python, etc. are built on Linux AMD/Intel cores and not on the Linux SPARC kernels. Similarly there is very little s/w available for execution on Solaris Intel.

• transfer data from Tiger Mountain Lion

  I'm trying to move the data from my old powerbook that has OS 10.4.11 on my MacBook Pro OS 10.8.5.   Can you help as well as most offer effectively and easily do this?

  Alarm: A Basic Guide for migrating to Mac Intel of PowerPC G3, G4, and G5 Mac - https://discussions.apple.com/docs/DOC-2295

  You take not only on a jump in OSX versions that you speak also from PPC to Intel architecture. When I went to Tiger on a PPC to the Mavericks on an Intel processor, I took the opportunity to do a spring clean and examine what applications I had which would still work, etc..  I did a clean install of Mavericks and then reinstalled software (upgrade versions sicesdonneessontdisponibles) and copied my data files manually.  If you are somewhat knowledgeable about computers you can try copying some files in your library to bring through browser bookmarks, etc. of the user.

• I have Mac OS 10.4.11 and Firefox. He says want to update to the most recent I have used but erased my old version and said I can't launch a new. How can I get old one back?

  Downloaded and asked if I wanted to replace my current version, which I did. Then when I tried to open Firefox, it said that I could not use this version. I guess my old version has been crushed. When I go to the Mozilla page, it does not can I download anything that is compatible with my operating system. Is there a way to get an older version?

  From Firefox 4, Mac must have an Intel x 86 processor (that you have) and OSX 10.5 or higher (you don't).

  • System requirements: Firefox 4 Firefox 5 Firefox 6 Firefox 7 Firefox 8 Firefox 9 10 Firefox

  The good news is that Firefox 3.6.x supports even OSX 10.4 and Mac with Mac PPC or Intel architecture. The bad news is that the support for Firefox 3.6.x series is likely to end in the first half of 2012.

  • System requirements: Firefox 3.6.x
  • Download Firefox 3.6.x: https://www.mozilla.org/en-US/firefox/all-older.html
  • Also see-> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac

  Updating your OS x 10.5 or newer will allow you to use Firefox 10.

  • See also the news about the latest OSX-> http://www.tuaw.com/2012/02/16/mountain-lion-drops-support-for-several-older-mac-models/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Update of HP DV6-2129el UC

  Recreational salvation,

  I want to upgrade my CPU.

  In fact, my laptop is equipped (AIDA64 sheet):

  Nome processore Intel (r) Core i5 CPU M 430 2.27 GHz
  Line 00020652:
  ID of marca (Intel architecture) 00 h (unknown)
  Piattaforma ID 27 h/MC 10 h (rPGA988A)
  Aggiornamento microcodice C line
  Unità HTT / CMP 2 / 2
  Temperatura Tjmax 105 ° C (221 ° F)
  Thermal design of the CPU 25 W power
  Heat the CPU Design current 50 A
  Max Turbo Boost multipliers 01:00 x, 02:19 x

  I saw that the bios supports i7 processors

  http://bit.LY/1h33xHM

  the upgrade is possible with this one? They seem very similar to package/pinout of the original i5

  http://Intel.LY/1bDm0U0

  Thanks in advance

  Daniel

  Hello

  There are a lot of materials for your machine at the following link:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&DLC=en&document=&product=4116100

  #1 the 8th manual will shows you a list of supported CPUS.

  Kind regards.

• Problem with typecasting function

  Hello world

  I have a problem with the conversion in labview function. I want to save my data in a binary format, so I use the conversion feature to convert data types to string format. Subsequently, these files must be read into Matlab and other software. Everything works directly in labview but is not with other software. For example, if I want to save a value of 1 (U16) I can only read a value of 256 in Matlab. I guess it has something to do with the effects of Mismatching described in help. But how can I fix? Can someone help me, that would be great?

  Thank you very much!

  Johannes

  I want to save the value 1 (U16), I can read only instead of a value of 256 in Matlab

  You have a problem (as said Mercurio, "Boutien") byte order.

  A U16 takes 16 bits, or two bytes.

  When sending two bytes in the meantime, both parties must agree on which one comes first.

  For many years, the standard was "big-endian", that is, the byte the most signiificant came first.

  Intel came and went against the standard byte, i.e. 'little-endian' or less important first.

  LabVIEW has 'Big-Endian' as the standard for the transfer (he was born on non-Intel architectures).

  If both sides of the Exchange do not agree on the method, you will get the symptoms you describe,

  If the two bytes are 00 01, one side which will see as 00 01 = an and the other side will see it as 01 00 = 256.

• Blackberry app in the world running on the Blackberry 10 Simulator

  Hello

  I would like to run blackberry apps world that I download on App world on the Simulator.

  I could do with the pre OS 10 simulators, but with the latest it doenst seem to work, no matter what Application download.

  I tried with different versions of the Simulator including 10.2.2_0X1444

  The Simulator to load correctly.

  I can browse the internet, so I know I have connectivity,

  I can go on the App World and then choose an application to download.

  The progress bar then moves as it downloads the file.

  However at this point, I'm getting the problem. Once the file is downloaded then just get the message 'Installation pending '.

  Is it possible to get an app in the blackberry world to run on the Simulator?

  answered my own question...

  Of

  https://DevNet.madewithmarmalade.com/questions/14729/test-launch-of-a-BlackBerry-bar-file-on-a-Devic...

  The reason is basically because the Simulator is x 86/intel architecture and we build for ARM (device architecture).

  We want to support the Simulator, but various other tasks (for example Windows Phone) platform support take priority for the forseable future. There are some difficulties to support the Simulator with an internal architecture on our side, graphics drivers, etc..

  Note that because the binaries, you can run in the device Simulator BB10 and aBB10 are different (if you use BlackBerry own SDK, it will compile two different binary, one for each architecture), you would not even test a real construction identical and there is always possibility of issue on the device, you do not see on the desktop.

• RMAN Duplicate + incremental backups + upgrade to 12 c

  Hello

  IM thinking the best way migrationg and upgrading database 11.2.0.4 to 12 c with reasonable downtime.

  reasonable downtime: 30 Minutes

  Source: Solaris (Intel)

  11.2.0.4

  DB Dimensions: 800G

  Target: Linux

  12 c

  new name of the comic.

  IM thinking to use RMAN Duplicate with option NoOpen(1) (RMAN catalog is in use). Double will be for sure several of 30 minutes then think if I can combine two copies for the recovery of the archivelogs generated during replication to minimize downtime. But is it possible when I change DB_NAME?

  Thank you.

  Hello

  I guess, you may need to check once this document. 412484.1

  I'm really not sure about your source and target system

  If your source is the 'Platform_id' 20, you can enjoy all your needs in 30 minutes or less. If this isn't the case, it is difficult.

  If your platform_id is 20, you can then create physical standby for your 11.2.0.4 and get the same thing, once the database is recovered, you can convert this logic of sleep (note: your database must be validated for the logical expectation), if you convert your logical database in standby mode, then you can change the name of your database to the new name also you can upgarde to 12 c.

  After upgrade, you can still recover all changes to your primary. Once the logic ensures sync with primary then you can pass.

  If your platform_id not 20, then

  You can opt for Golden Gate...

  Thank you

• Laptop to stop randomly and it says kernel mode trap

  whenever im in the middle of something my laptop stops

  It says kernel mode trap. it restarts... can't understand wat is it... Please help me... my it was not more than 2 months since I have this laptop

  desperate for solution en

  Original title: kernel mode trap

  Hello

  You really need to contact the seller and the manufacturer of system support. In OEM for system
  Maker is responsible for the functioning Windows and hardware. So no matter
  of cause, it is to solve. And it is under full warranty and may need repair or replacement.
  Keep in mind do you more they will say that it is something you have done. Added as
  even if you are somehow able to solve the problem you would still want it documented just in case where
  There are other related issues on the road.

  ==============================================================

  If you really want to solve the problem that I do not recommend to a new computer:

  In 'some' case will help this article.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
  online systems), their resources and the drivers and ask in their forums (if any)
  on known problems. Don't forget to update BIOS, drivers of low level chipset,
  and the other pilots of major on-board and separate devices. Those who alone can
  set all or part of these issues.

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8/8.1

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also, Windows 7 and Windows 8/8.1)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  BCCode: 0x0000007f with the parameter 00000008 7f usually means a hardware problem.

  Have you added a hardware or drivers updated recently? Check Control Panel - Windows
  Updates to see if all drivers have been updated it just before what is going on has begun.

  For 7f - this could be a problem of material such as uncomfortable cards or memory, although it
  are other causes. Power electric low could also lead to this. Use the above troubleshooting utilities
  and below and when you get to the drivers and segments of memory see below then
  go back troubleshooting if necessary.

  If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and ALL
  cable (try not just to close) on both ends if they are accessible and on the device ends if
  No (remove the cables and the relocation of their aid to eliminate minor corrosion). On a laptop
  on everything that can be done is to reinstall the memory.

  Notice the 08 (double fault) as 1st parameter means there are likely two causes. Do not forget
  to update your drivers manually by using Windows updates only detects certified pilots and
  Microsoft and the manufacturers are far behind in this process. Update the BIOS of the card NETWORK, WiFi, and
  Display/video and other important factors.

  If a laptop or a PC, you will need to take a shop (not BestBuy or other BigBox stores) or
  Support from the manufacturer of your system.

  --------------------------------------------------------------------------

  BCCode: 7F 0x0000007F which is the same as 0x1000007F

  UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  This trap might be a bound trap (a trap the kernel is not allowed to capture) or a double foul (an error occurred during the processing of an earlier fault, which always results in a failure of the system).

  Important info if you received a STOP Code
  
  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  UNEXPECTED_KERNEL_MODE_TRAP parameters

  The first parameter that is displayed on the blue screen indicates the number of trap.

  The most common trap codes are the following:

  • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.

  • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.

• 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.

• 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.

• 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault:
  • A kernel stack overflow. This overrun occurs when a cover page is hit, and the kernel tries to push a frame. Because there is no battery left, a stack overflow results, causing the double fault. If you think that this presentation has taken place, use ! thread to determine the limits of the stack, and then use KB (display Stack Backtrace) with an important parameter (for example, 100 KB) to display the full stack.
  • A hardware problem.

Less common trap codes are:

• 0x00000001 - a system call - debugger

• 0 x 00000003 - a breakpoint in the debugger

• 0 x 00000007 - a statement of material with no present coprocessor coprocessor

• 0x0000000A - has corrupted Task State Segment

• 0x0000000B - access to a memory segment that was not present

• 0x0000000C - access to memory beyond the limits of a stack

• 0x0000000D - an exception not covered by another exception; a protection fault concerning violations of access to applications

For other numbers of trap, see an Intel architecture manual.

Cause

0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

Resolution

Debugging: Always start by the ! analyze extension.

If this extension is not sufficient, use the debugger kv (display Stack Trace) command.

• If kv shows a taskGate, use the command .tss (display task State Segment) on the part before the colon.

• If kv shows a frame, use the command .trap (trap display frame) to format the shading.

• Otherwise, use the command .trap (trap Display frame) on the appropriate framework. (On x 86 platforms, this frame is associated with the procedure NT! KiTrap.)

After using one of these commands, reuse kv to display the new battery.

Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

Check that all hard disks, controllers, hard drive and the SCSI adapters are compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
* 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

===========================================================

It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
Microsoft drivers - update those without drain in their names (and BIOS and chipset).

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Windows 8/8.1 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

========================================================

Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
(new installation remove all).

How to restore, refresh or reset your PC (Windows 8/8.1)
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

How to update Windows 8 & 8.1
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

How to reset Windows 8 & 8.1
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

If you need a USB Flash Drive recovery or other methods:

How to create a recovery USB in Windows 8 & 8.1

http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

How to start on the "System Recovery Options" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

Boot to the tip "Startup parameters" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

--------------------------------------------------------------------------------------

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
list - and follow the prompts.

Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the diagnostic tool for memory Windows 7 (and 8) - in Windows 8 the
the name is "Windows Memory Diagnostic".
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

======================================================

After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8 posted at the top of the first answer above).

Driver Verifier can help find some BSOD problems:

Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617

How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.html

Using Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

Driver Verifier
http://www.techsupportforum.com/2110308-POST3.html

Using Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.php

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

You can disable the driver verifier
http://support.Microsoft.com/kb/244617

WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.

If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Senza thanks storage VMotion

  Hello to all

  Premetto che he mio e uno scrupolo più una domanda che in quanto credo, unfortunately, gia di know the risposta :-D

  veniamo al therefore: sto valutando the della functional di senza thanks introdotta nella versione 5.1 storage vmotion use;

  He problema e che i 2 cluster hanno a level di VCA different (stessa Intel architecture), quindi mi viene da Winegardner che he processo di validazione fallirebbe, my non ho trovato nessun esplicito re questa limitazione nella doc ufficiale di questa characteristic specifica.

  The mia speranza, ops domanda e secondo voi e possibile quindi?

  Saluti

  Ciao,.

  is non ho capito male, 2 cluster hai con lo stesso tipo di CPU Intel, pero con configurati 2 livelli VCA different. Perch is the sound CPU all equal?

  The VM you want migrare che da a cluster all'altro, risiede su uno No thanks dai storage 2.

  Ad ogni modo migrazione non Può avvenire has accesa VM, che lo storage sia thanks o meno, in quanto nel passaggio VM TR troverebbe ad andare a run known una che could avere delle istruzioni o diverse functional CPU. Abilitando the VCA in ogni caso, vai a mascherare o "castrare" in queste functional.

  The Unico modo che hai by migrare VM e da spenta.

  Ciao

  Francesco

• Allocation of memory in Windows Server 2003 Enterprise

  Hello

  I have installed Windows Server 2003 Enterprise Edition x 86 with 4 GB of RAM in a virtual machine running on ESX

  3.5 and the VM shows that 3.75 GB of RAM allocated. He also

  Watch he uses physical address Extension.How is possible to get this server to see the full 4 GB of RAM. RegardsDave

  Short answer is you can't.  It is based on the Intel Architecture.  It depends on the chipset and other factors, but basically the 32-bit operating system has a limitation in the 4 GB limit.  If Intel has planned no people would use this amount of memory in the x 86 original, therefore that the limitation exists.  Missing memory is tied up in video memory and other things that must be less than the limit of 4 GB.

  http://support.Microsoft.com/kb/279151

  SYMPTOMS

  If you use a computer that has more than 4 gigabytes (GB) of memory installed, system, Microsoft System Diagnostics (WinMSD) properties or other system utilities declare a value of memory which is 256 megabytes (MB) less than the total physical memory that is installed.

  Back to top

  CAUSE

  This problem can occur if a server uses the Intel Profusion chipset. In the dead (ROM) computer memory, memory 256 MB high region is reserved for mapped devices in memory of input/output (i/o). The amount of physical memory reserved may increase according to the number of devices of e/s that are installed on the computer. In general, a computer that has 4 gigabytes (GB) of memory real physics looks as if it has 3.84 GB physical memory total.

  The Profusion of Intel is a chipset eight-way symmetric multiple processing which is designed for enterprise-level server programs. It focuses on the power of raw processing and IO high speed performance that are commonly found in servers Dell, Compaq, Hewlett-Packard (HP) and 8-way IBM. The amount of memory consumed can be greater than 256 MB; However, the memory increases by increments of 256 MB.

  ____________________________________________

  "The MacBook Pro Core 2 Duo probably uses the Intel 945 PM chipset, which can physically handle the 4 GB of DDR2 RAM. However, a number of items that should be stored in and what RAM reached 4 GB physical RAM space, there are overlaps. In other words, in a configuration 3 GB of RAM, there is no overlap with the ranges of memory required for some features of the system. However, between 3 and 4 GB system memory tries to occupy space that is already assigned to these functions. For example, the allocation of PCI Express RAM occurs at a place about 3.5 GB of RAM and requires 256 MB of RAM. Thus, the virtual space between 3.75 GB of RAM and 3.5 GB of RAM is occupied by the PCI Express data. In a system with 3 GB of RAM, so nothing is wasted because the space required by PCI Express memory is always between 3.5 and 3.75 GB and installed system RAM does not violate this space. The net result is that at least 3 GB of RAM must be fully accessible, so that installing 4 GB of RAM, ~ 700 MB of RAM is bunk critical system functions, making it not addressable by the system. »

  ! http://communities.vmware.com/servlet/JiveServlet/downloadImage/5441/VMW_vExpert_Q109_200px.jpg | height = 50 | width = 100 | src = http://communities.vmware.com/servlet/JiveServlet/downloadImage/5441/VMW_vExpert_Q109_200px.jpg !

• Need to test Dreamweaver for Mac PPC G5

  I have a quad-processor clocked at 2.6 Ghz Mac G5 and I need to try Dreamweaver.  Now, with a lot more than computer, I have no special inclination to go Intel, there is really no advantage of speed or capacity.  Where can I get a Dreamweaver CS of the trial which is not dependent on the Intel architecture?

  Adobe ceased support of PowerPC processors with the release of CS5.  CS4 was the last version.  As it is no longer marketed, has more no test for it.  If you do not already have CS4, you're out of luck.  Time to move to an Intel Mac.

• Running AE 7.0 pro... just got new computer crashing...

  Hi people,

  I used AE professional 7.0 successfully for several years now on an iMac that was five years old.  My iMac just died and I got a brand new.  My AE opens very well (I was wondering if I was going to have to upgrade).  In fact, I used AE several times but it tends to crash for no apparent reason.  The stuff I'm working with is not complicated stuff (just some video footage I got from the firm of sequences and a text layer).  And when I try to make and even 30 seconds of my output project, it crashes before the end of the rendering.

  The old slower computer had no problem, but my newer faster seems to be stuck.

  I'm not particularly jazze spend $300 on an upgrade, because the way I just spent $2,000 on my computer, but if it's the only way I can continue to work, so be.

  Clues as to a quick fix might be able to try?  One of you, people more knowledgeable than me out there (that would be you, probably all) have any idea why this might be happening?

  Thanks in advance for any help you may be able to provide.

  Lynn

  A major difference (huge, in fact) that After Effects 7 is a PowerPC application. The only way it can work at all on an Intel processor is in Rosetta emulation mode - IE that it cannot operate effectively at all. Frankly, I'm surprised that you got as much as you did.

  If you have a new computer, you need an application written for its processor. After Effects CS3 and later have been written for the Intel architecture processors.

• CS5 system requirements

  I was looking at the configuration required for the CS5 Design Premium on Mac platform, it indicates that you have "Intel multi-core processor". If I don't have the Dual 2 GHz PowerPC G5 will be CS5 Design Premium still work? All other requirements I meet very well. Thanks for the help.

  On behalf of Adobe Systems Incorporated, Creative Suite 5 is not support Macintosh PowerPC-based at all. It is not a matter of preferenceor works better , the software requires Intel architecture processors.

  -Dov