Out of different signal every 5 seconds and receive AIO

Similar Questions

• computer beep will sound every 3 seconds and does not stop while the computer is on... why not? How to stop it? __

  My new Dell Inspiron 1545 beeps (like a USB stick is plugged or unplugged) every 3 seconds, without judgment, without doing me anything to provoke. I turned the computer off and back on several times, but the noise persists.

  Why this is happening? How to stop (without just turning off the sound)?

  Yessim

  http://support.Dell.com/

  As this is a brand new computer, it is under warranty.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  

  http://en.community.Dell.com/support-forums/default.aspx

  Dell Support Forums

  Please contact Dell at the link above.

  And the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Unit test: calculation of the length of the different columns in recordsets provided and received led to false a test failure

  Dear team of SQL Developer,

  It seems that the calculation of the length of the column in the expected and received recordsets behaves differently in some cases (when stored proc variables are used in the generation of the REF CURSOR, despite the explicit definition of the type of record): the length of the header and the length of the value in the set of records received are truncated to arbitrary length based on the returned value which leads to a false failure of a unit test. I.e. registries are the same in both sets of records, but the test run fails to the comparison of the recordsets because of different length. Please see the screenshot below:

  

  Here's the test case if you need to reproduce the problem/bug in your environment:

  1. use the default schema of HR of the Oracle examples package that comes with an 11 g database.

  2. change the HR. Table EMPLOYEES with the addition of a new column VARCHAR2 (4000) LONG_LAST_NAME:

  ALTER TABLE HR. EMPLOYEES

  ADD (LONG_LAST_NAME VARCHAR2 (4000));

  Update hr.employees set long_last_name = last_name;

  commit;

  3. create a PKG_TEST2 package with the source code below in the HR schema:

  ----------------------------------------------------------------------------------------------------------------------

  create or replace PACKAGE PKG_TEST2 AS

  TYPE EmployeeInfoRec IS RECORD

  (

  long_last_name employees.long_last_name%TYPE,

  first name employees.first_name%TYPE,

  E-mail employees.email%TYPE

  );

  TYPE EmployeeInfoRecCur IS REF CURSOR RETURN EmployeeInfoRec;

  FUNCTION getEmployeeInfo (p_Emp_Id employees.employee_id%TYPE)

  RETURN EmployeeInfoRecCur;

  END PKG_TEST2;

  ----------------------------------------------------------------------------------------------------------------------

  CREATE OR REPLACE PACKAGE BODY PKG_TEST2 AS

  FUNCTION getEmployeeInfo (p_Emp_Id employees.employee_id%TYPE)

  RETURN EmployeeInfoRecCur AS

  v_EmployeeInfoRecCur EmployeeInfoRecCur;

  v_LongLastName varchar2 (4000);

  BEGIN

  Select long_last_name from v_LongLastName

  employees

  where employee_id = p_Emp_Id;

  --

  OPEN FOR V_EmployeeInfoRecCur

  V_LongLastName SELECT long_last_name,

  first name,

  E-mail

  This_is_very_long_table_alias employees

  WHERE employee_id = p_Emp_Id

  order by 1 CSA;

  --

  RETURN v_EmployeeInfoRecCur;

  EXCEPTION

  WHILE OTHERS THEN

  LIFT;

  END getEmployeeInfo;

  END PKG_TEST2;

  
  

  ----------------------------------------------------------------------------------------------------------------------

  4. create a unit test for the PKG_TEST2.getEmployeeInfo stored procedure: (click the command create Test, select the stored procedure, click Ok for the pop-up message, click Next, click Finish).

  5. update the default value of dynamic query of value with the one below and save/post changes.

  Select the cursor)

  SELECT long_last_name,

  first name,

  E-mail

  Employees

  WHERE employee_id = idqry.employee_id

  order of the 1 CAD

  ) RETURNS $,.

  idqry.employee_id as P_EMP_ID

  from (select employee_id

  employees

  where rownum < = 5) idqry

  6. run the unit test newly created in the debug mode to display the shot.

  Thus, the record type 'EmployeeInfoRec' in the package clearly defines the LONG_LAST_NAME as VARCHAR2 (4000) through reference for the data type of column in the referenced table.

  But for some reason, the SQL Developer does not calculate correctly its length in the recordset "Receipts" If a variable is used (could be one as variable simple varchar2 in this reproducible test or complex variable of type of the object).

  Any ideas on that? Looks like another bug...

  Thank you

  Val

  The bug has been reproduced by the SRB and documented within the system of Support of Oracle SQL Developer team to pick it up:

  Bug 19943948 - TEST UNIT RETURNS EXPECTED ERROR: [LONG_LAST_NAME

  Hope the bug name can later be changed to something more descriptive, but it is not really... my only concern is the speed at which the known bugs would be fixed...

  Thank you

  Val

• Why my monitor goes into hibernation every 30 seconds and how to fix it?

  It doesn't matter if I'm on the web, in my yahoo email or file open on my drive C:, my computer times out after 30 seconds, then the screen is replaced with my screen saver.  Does anyone have a solution for this problem?  It's annoying when you constantly have to hit enter so often to return to the previous screen... Thank you.

  Right-click on your desktop--->Properties --->---> set amount of time, before the screen saverthe screen saver tab.

  Good navigation

• Mozilla was crashing every few seconds and I could not install the update. I removed the old to install the new and now I can not install - receive error messages that close.

  When I try to install, I get this message:

  "Firefox has stopped working".
  A problem caused the blocking of the program works correctly. Windows close program and you warn if a solution is available. »

  This happens when I select RUN to install Firefox version 9.0.1

  I removed the old version because it was crashing whenever I tried to use it and it wouldn't let me update with the new.

  I HATE IE and need my back Firefox - I'm dead in the water for a job without him.

  You check the Firefox (C:\Program Files\Mozilla Firefox\) program folder disappeared completely?

• get the circular rotation "dots" (and freezing) every few seconds.

  WHEN YOU LOOK AT A SEQUENCE ON U-TUBE (FOR EXAMPLE), THE PROGRAM BREAKS EVERY FEW SECONDS AND THE CIRCULAR SPINNNING "DOTS" APPEARS.

  Hello

  If I understand any video file needs to view must first release all what is common on most of the computer or laptop until you have very high speed internet the watercourses will be lower. Maybe you can try to install different browser as Firefix & Chorme and do check out as well.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• system crashes every 2 seconds

  Hello people!

  I have a laptop G62 with the 64 bit version of windows 7, I have almost 4 years

  About 3 days ago, I ran a few youtube videos, the system started to freeze (video + sound) every 2 seconds!

  I turned it off and went to bed, the next morning, I turned it, went to the home page! and he showed me the desktop but nothing opens, not applications without the browser, when I opened the Task Manager, it showed the programs that I clicked with a * 32 at the end!

  in about 5 min later explorer.exe crashes and I had to stop it.

  what I tried:

  memory test: test the HARD disc, freezes in almost 50%

  factory reset: the partition is not found

  Scan of the system with antivirus: freezes in the Middle!

  software to clean registry
  
  logged in to windows, normal start, after 6-8 minutes it starts to freez every 2 seconds, and every two seconds, I hear a noise in the HARD disk like crack! and it happens every 2 seconds
  
  my activities:
  performance of Flight simulator X
  turn 3d flash games
  movies and videos youtube

  system:

  Intel Core i3 2.40 GHZ (4CPUs)
  Home Edition of Windows 7 64 bit
  
  Note: I have been using safe mode with network for over 2 weeks now, is not freez in this mode!
  I do not have the CD repaired

  Sounds like the hard drive is failing fast and will need to be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get one of at least equal quality of the original in order to use recovery disks to install Windows & programs. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

• How can I write snapshot of my data to the file measured every 5 seconds

  Hello

  I try to take a snapshot of my stream once every 5 seconds and write it to a. File LVM. I have problems with the VI "write to a measurement file. The pace at which it writes data to the file seems to be dictated by the 'Samples to Read' parameter in the DAQ assistant. I tried placing the VI 'Write in a file measure' within a business structure and the launch of the structure to deal with a "time up" VI. As a result only in a delay of 5 seconds before the insiders 'Write in a file as' VI. Once the VI 'Write in a file as' is launched, it starts writing at 20 x per second. Is there a way to change it or dictate how fast the exicutes VI 'Write in a file measure'?

  My reason for slowing down the write speed are, 1) reduce space occupied by my data file. (2) reduce the cycles of CPU use and disk access.

  The reason why I can't increase the value of 'Samples to Read' in the DAQ Assistant (to match my requirement to write data), it's that my VI will start to Miss events and triggers.

  I don't know I can't be the only person who needs high-frequency data acquisition and low-frequency writing data on the disk? However, I see a straight road to key in before that.

  The equipment I use is a NI USB DAQ 6008, data acquisition analog voltage to 100 Hz.

  Thanks in advance for your help

  See you soon

  Kim

  Dohhh!

  The re - set feature has not been put in time elapsed VI!

  Thank you very much!

  See you soon

  Kim

• How datapoints n average every 10 seconds

  Hi all

  I am relatively new to programming and LabView. I use the DAQ Assistant to read voltage continuous 1-sample k and 1 k Hz rate. I want to do is take on average every 10 k samples (every 10 seconds) and record the average voltage with a timestamp value. for the time stamp I have no date and time, a few seconds have elapsed since the beginning of the command run.

  Can someone point me in the right direction as to how I average data acquisition pressure readings every 10 seconds?

  No, think about it.  If you want to collect 10,000 samples and their gathering at a speed of 1 000 samples/s, it takes 10 seconds to collect them all.

  Take a look at the attached VI.  It is a bastardization of either of the examples DAQmx.  It should show you how to modify your code to get good results.

  Don't forget, you don't really have to take a sample for the average, or that enjoy slowly.  It's just to show you the idea.

  There are much better ways to accomplish your task, but they require advanced programming techniques.  I hope this help to get you started.

  BTW, I left the PDM screws in there to show you another way to store data.

  Good luck!

• Position of the object to change every 5 seconds by using the timer in QML

  I need help,

  I have five circle like this

  O O O O O

  I want to make a "BOLD" change position every 5 seconds and is permanently as an indicator of the slide, someone can tell me how to do in QML?

  Follow this

  http://developer.BlackBerry.com/native/documentation/Cascades/dev/signals_slots/signals_slots_add_ac...

  One of the options is:

  QML

  property int circleIndex: 0 // Firts circle
  
  CustomTimer{
      id: timer
      interval: 5000 // 5 seconds
      onTimeout:{
          if (circleIndex == 4){ // 5th circle
              circleIndex = 0
          }else{
              circleIndex++
          }
      }
  }
  

  It may be useful

• Lock screen and mouse L850 satellite every 2 seconds

  I think I have a hardware problem with the Satellite PSKDLA - 0C800R L850.

  It is a laptop I bougth to my wife but he has ended up with my stepson of Uni studies. While he had it the hard drive is not one of his friends replaced. twelve months later, he advised it was gone blackscreen and G'nort would turn out.

  I finally got hold of it again and managed to drain the power remaining and replaced the CMOS battery remove a strip of RAM and it starts fine. I've proved a faulty stick so that left aside. Then I realized that there was a problem with the screen and the mouse

  . The screen would brighten up (wash out) then Flash and stabilize. First thought was video chip or the driver.
  At the same time would lock the mouse. When the screen clears the mouse would again.
  Happening every three or four seconds but now every two seconds. It is more difficult to do something.

  Have reloaded many drivers, but I think it is material, but not sure if it needs a motherboard or processor.
  Can you advise?

  I forgot to mention that the image of the screen is slightly down from senior management.
  Tere is a few millimeters of black with a white line on the top edge of the image.
  This white line seems to come on and off with the locked mouse synchronization and the screen. This is another indication of the problem or the backlight?

  Hi, have you checked the thermal paste between the CPU and the heatsink?
  CPU fan blows hot air outdoors?

• WLAN signal lose every 3 seconds

  Hi, can someone help me?

  I m not technical at all had a laptop bought me for Christmas, have a wireless router of the Virgin and tried too raise the computer laptop and received running, after many attempts with the help of virgins that they told me that I can not with this portable wireless because it has an active WEP wireless adapter and it must be too active WPA.

  My friend took one look at it and do work on wireless internet but it keeps losing signal every 2/3 seconds he keeps just connection / disconnection. I m already sick of ringing Virgin and don t know where else run too much.

  It's a PSLB9E - 009007EN model and it was installed with Windows XP not Vista!
  Would really appreciate any help or someone can give me advice.

  Thank you

  Hello!

  You should check if the wireless network adapter and the router use the same standards.

  In addition, you must disable all security features like hidden SSID, MAC address filtering,

  I put t know why Virgin tells you that you can not go wireless with this laptop, but usually you can use each notebook with each router if the wireless network adapter supports encryption (WPA or WEP).

  In your case, I would also check if you have the latest drivers and BIOS.

  Good bye

• My machine suddenly began to access the internet every few seconds.__How can find out what is the cause? A virus scan led to no result.

  My machine suddenly began to access the internet every few seconds.
  How can I find out what is the cause? A virus scan led to no result.

  Something constantly running must be what actually happen. The network meter gadget shows that it is evenly spaced.

  O.K.  He finds!

  It is McAfee Network Agent - mcnas.exe

  Services of all the MCS crossed and off a
  This one did.

  Don't know if its corrupt or not
  And talk to McAfee is in talks with the India!

  Nothing seems not to be dangerous.

  Thanks again for all the help.

  TREV.

• Thunderbird activity Manager reports several times the gmail trash Emptied over and over every few seconds. Solved by trash Compact/repair

  First of all, thank you for an amazing product! Life-changer.

  Thunderbird Activity Manager reports repeatedly trash emptied over and over every few seconds. The account he reports that empty the trash has no trash. I have repaired the trash folder, repaired the Inbox folder, compacted the account, does not. I've left Thunderbird worked during 10 hours see if it was a natural process, but the continuous emptied trash messages. The mail folder, I am using for this account occupies approximately 7 GB. Thank you! Mike

  Ignore my suggestion on unsubscribe to solve the problem of trash - you already solved.

• Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button

  Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button. It this causes only after I opened Firefox, my computer works well before the opening of Firefox. I h

  It looks a little like yo maybe has a hardware problem on your computer. have you tried to repair permissions on your hard drive? create a new Firefox profile? Use the Profile Manager to create and delete profiles Firefox