Out of nowhere, I get this error

Similar Questions

• Out of nowhere I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  I nowhere hand, I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  Hi Kingsberry and almathof,

  Please refer to this thread: Re: Premiere Pro 2015 won't open after the recent update

  Thank you

  Regalo

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• Why I get this error message: error while trying to synchronize audio and midi?

  I just updated Logic Pro and all of a sudden my lexicon alpha interface does not work correctly.  I get this error message: error while trying to synchronize audio and midi. Check for conflicts between Logic Pro and the external device. Help

  Start by making sure that the project in logic settings are set correctly - I think that the lexicon only supports 44.1 or 48.

  If it is software used to Setup place the lexicon make sure you that the sampling frequency is set to the same logic.

  Sometimes that power and the lexicon solves the problem...

  If none of the help above - make sure you use a multi-out or comprehensive audio device (OS X)

  

• At startup I get this error Message = "error in svchost.exe - application instruction to memory 0x7c919af2 who 0x00000010.the memory could not be written."

  Windows XP

  At startup I get this error Message =

  Svchost.exe - application error the instruction at 0x7c919af2 memory 0x00000010.the memory that could not be written.

  What should I do about it?

  You don't need to "try" things - you need to "do" things:

  It seems that the last update for Windows Media Player may contribute to this problem when the system has the Windows Driver Foundation Service active and running.

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you should disable the WDF Service.

  Click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services Applet

  Locate the Windows Driver Foundation - User-mode Driver Framework Service, right-click right the Service, select properties and choose disabled and OK your way out of the Services Applet to save the changes.

  Note that you will not be able to 'Stop' Service first, but it's OK.

  Restart your system (the WDF service is now disabled) and check your failure condition now.

• I get this error message every time I try to open Outlook Express: your server unexpectedly terminated the connection.

  I get this error message whenever I try to open Outlook Express:
  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465, secure (SSL): Yes, error number: 0x800CCC0F

  How can I solve this?

  original title: Outlook Express error

  Does OE open at all, or you get this error after opening?

  Check your mail at Yahoo.com and see which messages are still on the server that you have not received. The first online can be very large and cannot be downloaded. If you find such a message, read it and delete it online.

  In addition, you must disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for many AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.  You will probably have to do it.
  

• After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

  After the connection to my computer today and to go to Youtube, I get this error message on my screen.

  The assertion failed!

  Program:...
  File: common\npn_gate.ccp
  Online: 267

  Expression: pPluginShim

  I try to press abandonment and try again but nothing happen.

  Hi Shadwik,

  Thanks for the reply.
  I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
  After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
  After that my PC works fine.

• does anyone know how I can uninstall AVG free 9.0 antivirus program. I get this error message, why tryig to uninstall - @FinalDlg_default_logfile_name

  I installed a trial of avg vertion, seeing that I have only 22 days of free trial, I changed my mind. In addition, my computer began to close and restart continuously, so I used system restore to go back to before the installation of this particular avg, but I used avg free 9.o. After the system restore, my computer is more closed suddengly & restart again but now I want to uninstall avg free 9.0 because it's showing out n the Security Center and I can't turn it back on t. In the judgment, it does not work so I decided to take down a new free version of avg, but to try to install it, I get this error message - @FinalDlg_default_logfile_name

  Hello

  the link below is the AVG removal tool (top of the list)

  Choose the version of right trepanning to your machine

  http://www.Avg.com/us-en/utilities

• whenever I re - start the computer I get this error: could not load the file nta0104.dll.

  "original title: NTA0104.dll.

  whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

  HM

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• During the scan, I get this error "'there are no installed TWAIN compatible device." Please install one and try again. »

  Original title: scanner problem

  I get this error - "there are no installed TWAIN compatible device. Please install one and try again. "- When I try to scan a document using the utility Windows 7 Scan (hppscan7.exe) and a printer HP Color laserjet CM1312nfi. I tried to reinstall the printer driver and software.  I have a laptop HP G71-340US running under WIndows 7 64-bit.  Service Pack 1 is installed, and all windows updates are up-to-date.  I hope that someone out there has a solution for me!

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooter of material and check if that helps.

  Open utility troubleshooting hardware and devices:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Temporarily disable the security software and check if it helps.

  Disable security software: http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Run the HP scan Diagnostic Utility and check if it helps.

  HP scan Diagnostic Utility:

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&DLC=en&docName=c02114802&LC=en&product=3418707

  Hope the information is useful.

• I use Live mail all the time, but today I could receive emails and could not send email. I get this error 0X800CCC0E.

  I use live mail and Comcast as my ISP.
  Out of the blue I can receive emails, but when I try and send emails I get this error.

  error 0X800CCC0E.
  

  Comcast is no longer supported the use of port 25 for SMTP. Please follow the instructions on this page to apply the recommended settings: to reconfigure your Windows Live Mail client to use SSL instead of port 25

  After, click work offline and delete all messages pending from the Outbox (below the records of account in the folders pane). Then close WLMail and wait a few minutes before resuming. Compose a new message to test and send it to yourself. Post a new message in your response.

• My VM was working fine, now I get this error

  OK people, I really hope that someone can help me here.

  I have been using VM Ware on a Windows 7 Ultimate machine for more than 18 months without any problem at all.

  I use the Version of VMware Workstation 7.1.4 build-385536

  The virtual machine is also running Windows 7 Ultimate.

  The problem I have now is that after 5 minutes of starting the virtual machine, it getting hit with this error:

  Operation on the file "C:\Users\User\Documents\Virtual Machines\Windows 7x64\Windows 7 x64.vmdk" failed.

  If the file is located on a remote file system, make sure that your network connection and the server on which resides this disk to work correctly. If the file is saved on a removable medium, link media.

  Choose Retry to retry the operation
  Choose to Abort to terminate this session.
  The choice to continue to pass the error to the guest operating system.

  Retry
  Abandon.
  Continue

  Now my VM is on my local machine, so there would be no problem.

  Second, my VM is just on my C drive, is not on any form of removable media.

  The only option is to click on one of the 3 options above but when click try again, I get this error message:

  Retry:

  
  Fatal error VMware Workstation: (vcpu-0)
  NOT_IMPLEMENTED d:/build/ob/bora-385536/bora/lib/aioManagers/aioWin32Completion.c:898
  A log file is available in "C:\Users\User\Documents\Virtual Machines\Windows 7 x64\vmware-vmx - 2060.dmp". Please request support and include the contents of the log file and the base file.

  
  To collect the data to be presented in support of the virtual machine, select "Collect load data" in the Help menu.

  You can also run the script 'VM-support' in the folder my computer directly.

  We will respond on the basis of your entitlement to support.

  And of course, if I click on 'Cancel', his farm everything down.

  So if I click the third option 'yet' my Vitual machine just pick up or accidents.

  If anyone can help me with this, I would be so greatfull. One day his works fine, the next it's not. Very strange and annoying.

  He mentioned above in the 2nd error message on a log file, I've attached the file to this message, just in case anyone can acquire any use out of it.

  Thank you in advance to anyone who can help me.

  There is no serious errors in the log.i

  I would now run the command chkdsk even inside the virtual machine that you have used before
  Chkdsk/f/x/r c:
  and if that comes out clean you can consider yourself lucky.

  I would always decipher the VM...

• I have a problem installing adobe muse widgets.while import a new widget, I get this error "import library error.preloader.mutlb number unexpected formart '276'"»

  I have a problem installing adobe muse widgets.while import a new widget, I get this error "import library error.preloader.mutlb number unexpected formart '276'"»

  Hello

  You use a 32-bit computer? (use the links below to chcek it.)

  Windows: http://windows.microsoft.com/en-IN/windows7/find-out-32-or-64-bit

  MAC: how whether your Mac to Intel processor with a 32-bit or 64-bit - processor Apple Support

  This widget can be installed on the Muse CC2014 and above versions and if you are on a 32-bit computer, you will be unable to upgrade to the MUSE CC2014 and above.

  I recommend you to update your computer to 64-bit and then you go to the MUSE CC 2014, once updated, you will be able to install this widget.

  Please let me know if the machine is 64-bit.

  Concerning

  Vivek

• Error 1003: I get this error when you try to connect to a Web site. I have revived the iPad and was able to do, however, when I left the game I got error 1003. I tried

  Error 1003: I get this error code when I try to connect to a Web site. I have revived the iPad and was able to do, however, when I left the game I got error 1003. I tried to reconnect and automatically received this error message. This happens with all browsers on my iPad. I deleted the cookies, cache, etc, it may not always connect. Help, please.

  You can try this by using a different connection? If possible cell or another location of WiFi?

  If it goes with several browsers - it's probably your network

• Firefox does not open and I get this error message

  When I click on the firefox icon I get this error that says Firefox your profile cannot be loaded. It may be missing or inaccessible.what it dose average! How can I save my internet!

  create a new profile

  • Use the Profile Manager to create and delete profiles Firefox

  and transfer of the old stuff

  • Recovering important data over an old profile