Outlook 2007 with Tungsten T3 - Setup error .jpg (no application on your handheld to open these files)

Similar Questions

• Error: No application on handheld to open these files...

  When I go to sync music on my handheld, I get the above error message... Please help!

  According to other threads, the music player handles files .mp3 and .aac, but not .wma files. So depending on how you ripped music, it might or might not play.

• Outlook 2007 with Vista 64-bit

  I'm curious to know if anyone is having the same Outlook 2007 with their workstation?

  Symptoms:

  • • Sometimes takes a while to load. Displays "(ne répond pas)" If doctored "

  For me, it turns out that the solution was to wait for Microsoft to come out with a fix.

  Solution: Suffer and wait for Microsoft to finally release an update that works.

  Also, be aware that there are several add-ins that conflict with Outlook 2007.

  Take a look at tools > Trust Center > Add-ins Google any other than Microsoft points to see if there is a problem

  Here are a few sites that has some good tips.

  http://www.HOWTO-Outlook.com/

  http://www.HOWTO-Outlook.com/

  I hate Microsoft. If anyone has a recommendation of other good links, thanks for posting.

• All the icons and files with the extension .lnk and error message: "Windows cannot open these files.

  Original title: STUCK IN. LNK ??????????????????????????????????????????????????????????????

  all my icons turned into extensions of file and state that "windows is unable to open these files. I can't search the Web for a fix, because it downloads as a .lnk I can't open as well?

  Hi MarcSatz,
   
  -Did you change on your computer before this problem?
   
  This problem occurs when one or more of the following conditions are met:
  • The registry values that are associated with the file name extension are corrupted or missing values.
  • The computer is infected with a virus.

  Here is an article that will guide you in the process of fixing the issue:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
   

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

• I try tom open a gz file and get an error message: Broken pipe error 32: can someone tell me how to open the files of theses and recover what is in them, in layman's terms please.

  I used a program called by Kivisoft to recover my music files on my hard drive. He recovered their property, but they were in the form of a ZIP file with a gz file. But whenever I tried to open the ZIP file, I get an error message saying broken pipe 32 error. There, someone knows how to open these files and recover music on their part could you explain in simple terms that I'm not good with the user base of coding software. Thank you

  Here are some steps for you: http://www.wikihow.com/Extract-a-Gz-File

  You can start by trying utility GUI Tar to unzip the .gz file

• error message "you don't have permission to open this file. Contact the file owner or administrator to get permission. " I am the administrator and the owner of the file.

  My XP computer crashed and now I have Windows 7 on a new PC.  I downloaded my files from an online backup and now when I try and open a Word document, for example, I get the error message "you don't have permission to open this file.  Contact the file owner or administrator to get permission. "  I am the administrator and the owner of the file. Help!  I am locked out of all my files!

  1. Right click on the folder that you want to take control and then click Properties.

  2. Click the Security tab, click Advanced, and then click the owner tab.

  3. Click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. Click on the name of the person you want to give to the property.

  5. If you want that person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.

  6. Click OK.

• I can not open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files.

  I can't open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files. What can I do?

  Hi ulcabeek,

  Greetings!

  What version of DNG converter that you use?

  You need DNG converter 8.6 for this: 8.6 camera Raw and DNG Converter 8.6 now available

  Concerning

  Jitendra

• Synchronize Outlook 2007 with the HTC Diamond phone

  I have a HTC Diamond Smart Phone & Windows Vista recently upgraded to Microsoft Outlook 2007. Now, the computer says it has synchronized, but all Contact numbers are not in the phone! Where are they? What is the synchronization of the phone with? Of course, this isn't the files Outlook 2007 Contacts! What should I do to tell the computer and the phone how to find the right file?

  I finally understood how to solve this problem.

  The only way to solve this problem is to uninstall and reinstall Windows Mobile.

  Unfortunately, he has no other way to change the configuration of Windows Mobile once initially put into place. This could be considered a gap in the program, or Microsoft should be aware of this problem and be able to provide the answer in a FAQ.

• Synchronization of Outlook 2007 with default e-mail blackBerry Smartphones

  Hi all

  I have a curve 8310 with 4.5 installed.

  I have 3 email accounts with my gmail as default on outlook 2007. After I upgraded to 4.5 and the desktop software I found that I couldn't sync my BB and I had to change my default email on ADVANCED OPTIONS | SERVICES for other DEFAULT e-mail account.

  Question is what people do with multiple messages? Appointments are created via my email companies and then synchronized to my online calendar using google.

  A few appontments an account with gmail or company does not appear on my BB or outlook 2007.

  Does anyone have an idea?

  Thanks in advance

  Hello

  Go to the calendar and open it. Press menu, select options.

  You can see the calendars associated with email addresses. You will also see a calendar

  default named unit. Do you have records in multiple calendars?

  Click each calendar and all the way down, it will show you the number of records.

  Let us know.

  Thank you

  Bifocals

• I get the error msg "blah.doc is not a valid Win32 application" when you try to open the file Microsoft Office 2007 my memory stick

  I have Windows Vista and have recently purchase and installed Microsoft Office 2007. When I try to open files that I know to have been created in standard desktop applications, and in this particular case Word, I get an error message that the file is not "a valid WIn 32 application".
  I can, however, open Word 2007 application and then open the file and it works, however, it's a pain in the _ and I don't want to do it like that - I want to double click on the name of the file directly from my data stick etc. and magically transported to my next exciting assignment to proffessors (honest)

  Help me OBI WAN KANOBI - your My only hope!

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  Discussions of general issues of Word.

  They will help you with your questions Word/office in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• Error message in Photoshop CC 2014 trying to open JPEG files

  After installing the updates of Photoshop CC 2014, one a few days ago I am not able to open JPEG files.  Whenever I try to open a JPEG file, I get the following error.  I tried to uninstall the program yesterday and put it back, but still having the same problem.

  

  Here is the version of Photoshop that I use...

  

  Because you have CC 2014 on a Mac, which tells me that your OSX is probably 10.8 or less.

  The updated Camera Raw, 9.5 causes this error due to a conflict with older versions of Mac OS x, and you go back to 9.4

  Setup for 9.4 is in this technote: error: 'File not found' when opening JPEG files

  So just follow the instructions and you should be fine.

  Gene

• Error "Windows explore has stopped working" when you open the file in my documents

  Original title: opening a file in the folder my documents

  Whenever I try to open a file in my documents folder, specifically a CV that I downloaded on a construction site. I get a message that windows Explorer has stopped working?

  Hi dalintn,

  1. What is the file format of the document?

  2. are you able to open documents from other locations?

  3. did you of recent changes on the computer?

  Check if the similar problem persists when you access the document from any other location on the computer.

  Method 1

  This error message can occur if there is some system files corrupted on your computer. I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2

  If the previous step fails then I would suggest that you do clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

   

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Errors in JavaScript by DW and try to open a file

  Hello, at the launch of DW I get an error "bcinit is not defined. When you try to open a file within DW I get an error "onOpen is not defined. Please see attached. I uninstalled / installation using the cleaning tool, but the errors persist. If I click OK on both instances DW launches and I can open a file. I use DW CC 13.2 Build 6471 on Windows 8.1. Any input to solve this problem will be appreciated.

  

  Check here!

  http://forums.Adobe.com/thread/429114

• Validation with 5610 re-setup error

  Hello.  Take a deep breath and I'm leaving...

  I have a 5610 which worked perfectly with my computer and Windows XP until the computer crashed.  I had to replace almost all of the Interior and therefore had to go back to square one.  The man who fixed the computer reinstalled Windows XP but must have SP3 in the machine.  My old version must have been SP2.  I think so!

  Obviously, I had to reinstall a lot of software to get back up and working again.  No matter how hard I try now I can't get the software of HP Image Zone of re - install.  He tells me when I try there is a validation issue with hpz01.exe and c:\windows\hpoins07.dat Setup.  There is a six-digit number that follows it.   The system has tried several things including a self fix but it keeps telling me it does not work.

  The other interesting thing to note, it is that when I did my twice weekly scan with McAfee stalls hpz files in the drive and won't spend hours.  I have reflected on the disc and you can see no visible fault with it.  It has not been damaged in any way.

  I wonder if anyone would know what the message means and if it is a corrupted how disk download software from the HP support site.

  I'll be very grateful if someone can answer that I am waiting and waitng and waiting to get this bit to scan the computer fixed so that I can submit an article for publication.

  TF.

  P. S.

  The self-test and all document processing to hang in the print queue, and I can print a self-test using the keys on the printer page somehow.  Also I can copy any image that is located on the glass plate, but when I press the scan button it says that there is fault and go to documentation that gives me no will at all.  I don't know about the fax that it is rarely used and there is no way to test except to say that I don't get an error message when I choose this option.

  Phew.  That's all.  Thank you.

  Hi c0rnel

  Doing that, got the T shirt but not printer HP Image Zone!

  I even went as far as unplugging USB and disconnect the system from the wall outlet when the computer was turned off.

  Thanks for advise him.

  I spent all morning on the phone and then McAfee who say that it is not their problem but Windows XP - I think that it's either a Active X that will not allow McAfee or is that SP3 doesn't online.

  Sound like I know what I'm talking about, but not really.

  Thanks Tf.

  Message edited by Technofool on 08/01/2009 09:04

• Installation of Outlook 2007 with Yahoo

  I have a HP Pavilion running Windows 7.

  I also have Office 2007.

  I tried several times while they years to configure outlook to work with yahoo mail and never succeeded.

  I need someone to guide me through it.

  Ken [personal information]

  Hello

  Have you tried that?

  http://help.Yahoo.com/l/SG/Yahoo/mail/classic/mailoptions/pop/pop-36.html

  Kind regards.