Output for the bridge 6.3 web module install question

Similar Questions

• Confusion about the Source of excitement in the bridge SMU-4331 input module

  Hello

  I had some confusion through the input of the bridge SMU-4331 sheet module.

  In the features section of excitement, its current Minimum as 29mA says. What it means. It can only current greater than 29mA delivery!

  

  I think this should me Maximum current specification.

  If you look at the table below

  

  350 ohm resistance, the current should be 10V/350 ohm = 28.5mA

  but for 1 K ohm, current will me 10V/1Kohm = 10mA, which isn't normal, if you specify current minimum as 29mA.

  any thoughts?

  Kind regards

  Mirash

  Hello Mirash,

  I'm glad I could help!

  As for your other question, the SMU-4330/4331 are inherently peripheral ratiometric.  This means that they are designed to detect the level of excitement and range of the ADC to the appropriate scale.  In this way, we can compensate for permanent changes in the voltage.  One of our engineers wrote a big article really nice area on the subject I would recommend that you take a look at: Sensors of Measuring Bridge-Based with the ratiometric approach

  See you soon,.

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• Which is more effective for the bridge or photoshop contact sheets? {Double wire: locked}

  Hello

  Which is more effective for the bridge or photoshop contact sheets?

  Thank you.

  Duplicate thread: which is more effective for the bridge or photoshop contact sheets?

• Dear Adobe. Creative cloud has different applications. Some try to versions and others may be installed. My question: the apps that said installation, for the bridge of eksampel, is that included my creative claud account?

  Dear Adobe. Creative cloud has different applications. Some try to versions and others may be installed. My question: the apps that said installation, for the bridge of eksampel, is that included my creative claud account?

  Hi Tomas.

  If you have creatively Cloud Complete/All Apps, you should have the complete list of available desktop applications.

  If some show buy or try or judgment, please see this link:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Guinot

• How to stop the bridge.exe active as to install the new application for example. Flash CC?

  How to stop the bridge.exe active as to install the new application for example. Flash CC? Help, please?

  I can not install any new demand every time.

  Please see:

  http://helpx.Adobe.com/Creative-Suite/KB/error-installation-cannot-continue-bridge.html

  Kind regards

  Ashutosh

• I get the error code 1706 - valid no source is found for the product my Hub. Windows install cannot continue.

  I get a pop up saying error 1706 that valid no source is not found for the product my hub. Windows install cannot continue.  Also "the feature you are trying to use is on a nework resourse which is not available."

  Can someone tell me what to do and what is the problem

  Thank you

  Hi Traceyjane,

  (1) when exactly it happens?

  (2) do you use the computer as an administrator?

  (3) what is the number of brand and model of your terminal?

  If you try to install the software for your hub, make sure that you install the correct package for your computer.

  Step 1: Try to install the program as administrator right click on the installation program files and select run as administrator , click continue if you are prompted to confirm.

  Just check the items below that addresses a similar issue

  The feature you are trying to use is on an unavailable network resource
  http://support.Microsoft.com/kb/828376

  You receive an "error 1706. Valid any source not found for the product

  http://support.Microsoft.com/kb/253768

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lord of the Rings: the battle for the 2 game Middle Earth will install but no opening onto Windows 7

  I have a new DELL Windows 7 computer, which can work normally in other older games.  However, this game does not.  Name of the game is Lord of the Rings: the battle for the 2 Middle-Earth.  It installed correctly.  When I insert the disc it pulls up a small menu, corresponding to 1 of the options to start the application.  When I click this, it opens a large loading screen, but this loading screen remains, until the computer turns off a dialog box indicating: "The Battle for Middle - Earth II has stopped working," and then loading the screen closes.  I tried troubleshooting and he did all that has contributed to the execution of the game. He told me that the game was not compatible and it was...

  If anyone can help me, it will be greatly appreciated!

  ------------------

• try to install on the second computer. Already had two licenses, one for the office, one for the laptop. Now try to install the Office composition on laptop. Applications are coming up with buy it now and the start of the trial. Any ideas?

  try to install on the second computer. Already had two licenses, one for the office, one for the laptop. Now try to install the Office composition on laptop. Applications are coming up with buy it now and the start of the trial. Any ideas?

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• Portege R500 - 11K with the XP drivers for the UMTS/HSDPA/EDGE/GPRS module

  Hello world

  I have some pre-sales questions on laptop nice R500 - 11 K.
  I want to install XP pro on this machine. The device is delivered withou XP Recovery CD. (model 11A C)
  There are beautiful collection for R500 XP drivers so I can install XP manually.

  NES http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=eu&mode=allMachi & action = search & teddProduct = 747

  Model K 11 has another installed UMTS/HSDPA/EDGE/GPRS module unlike models. Great!

  What about drivers for this module?
  There is not any UMTS/HSDPA/EDGE/GPRS modem drivers listed in the list of drivers for Vista or XP or device.

  So the question is, if I want to install XP, where can I find the driver for 3G module manually?
  Is the component of another driver driver?
  -Does anyone know the name and the type of this module 3G? In my view, the module is provided by aint Toshiba of the seller.

  Anyone have any experience with XP on R500 11 K?

  Thank you

  Marek

  Hmm, you're right.
  The pilot of the 3G is not available on the Toshiba page

  Seems that the driver has been downloaded not however the Portégé R500 was delivered with a * Novatel MSM6275 card * ThreeG (Qualcomm should be manufacturing the chip) and if you want, you could try to download the driver of the 3rd site part.

  Good luck

• Graphics card double output for the motorway A58

  Hi guys,.

  Work just gave me a Lenovo A58 SFF and while I don't have the serial number, I don't know what follows-

  Lenovo ThinkCentre A58
  Small form factor
  Intel CORE 2 QUAD Q8400
  4 GB OF RAM
  Hard drive 320 GB

  The machine is used only for work (spreadsheet, processing and internet) and I would like to run two monitors (both with VGA, PCI and HDMI inputs), but Lenovo A58 LTS offers only one VGA output.

  I did a quick search for graphics in this forum, but suggestions seem to be a little out of date as the machine is a bit long in the tooth now.

  As I work for a small business, we do not have a 'IT Department', so it is left up to me to sort.

  If you could please provide me with some options, it would be much appreciated.

  Thank you

  Chris.

  (1) the onboard graphics on the A58 can support 2 monitors. The card is in fact the second connector for the integrated graphics card.

  (2) limitation is that to do with graphics performance, you can not play on it. But Office apps will work fine. normal movies will work as well.

  (3) it's a true second monitor, you can expand the view to make both monitors independently managed.

• Firmware for the F348XP - N77 - 23 Nexus module problems

  H,

  I hope you had great Christmas time! I am currently working on the new Nexus lab, and I have a challenge.

  I try to get 1/10 Gbit / s Ethernet Module running. Do you know where to find firmware for this module and how to set the variable initialization for her? What I get so far:

  introduce the module:

  Status of Module Type mod Ports model
  --- ----- ----------------------------------- ------------------ ----------
  1 48 1/10 Gbit / s Ethernet Module N77 - F348XP - 23 ok
  2 48 1/10 Gbit / s Ethernet Module N77 - F348XP - 23 powered-dn! This one, with that I'll have the problem
  3 0 active supervisor Module-2 N77-SUP2E *.
  4 0 supervisor Module-2 N77-SUP2E ha-standby

  When I try to turn it on by entering

  (config) # No module poweroff 2

  I'm more about newspapers:

  2015 Dec 16 00:38:23 % xxx platform-2-MOD_DETECT: Module detected 2 (serial number JAE19290A6J) Type of Module-1/10 Gbps Ethernet Module model N77-F348XP-23
  2015 Dec 16 00:38:23 % xxx platform-2-MOD_PWRUP: Module 2 under voltage (serial number JAE19290A6J)
  2015 Dec 16 00:38:23 % xxx platform - 5 - module MOD_STATUS: Module 2 - current situation is MOD_STATUS_POWERED_UP
  2015 Dec 16 00:40:02 xxx % BIOS_DAEMON-SLOT2-5-BIOS_DAEMON_LC_PRI_BOOT: System started from the main BIOS Flash
  2015 Dec 16 00:40:05 xxx % FW_APP-SLOT2-2-FIRMWARE_IMAGE_LOAD_ERROR: error extraction and loading Firmware: firmware Flash and software images are bad
  2015 Dec 16 00:40:06 xxx % MODULE-2-MOD_FAIL: initialization of the module 2 (serial number: JAE19290A6J) failed
  2015 Dec 16 00:40:06 xxx last message repeated 1 time
  2015 Dec 16 00:40:06 xxx % PLATFORM-2-MOD_PWRDN: Module 2 power off (serial number JAE19290A6J)
  2015 Dec 16 00:40:06 xxx % PLATFORM-5-module MOD_STATUS: Module 2 - current situation is MOD_STATUS_CONFIGPOWERED_DOWN
  2015 Dec 16 00:40:06 xxx % PLATFORM-5-module MOD_STATUS: Module 2 - current situation is MOD_STATUS_POWERED_DOWN

  I take the problem is with the firmware, but I can't find the path to it. It there is no defined variable initialization is module 1, or 2, but module 1 started without problem.

  XXX # display the start module 1
  No set variable initialization module
  XXX # display the start module 2
  No set variable initialization module

  I can see the bin files under
  XXX # cd bootflash://module-4/
  bootflash://module-4/20150808_221923_poap_7580_init.log bootflash://module-4/vdc_3
  bootflash://module-4/20151211_010151_poap_8037_init.log bootflash://module-4/vdc_4
  bootflash://module-4/20151211_015441_poap_7723_init.log bootflash://module-4/vdc_5
  bootflash://module-4/lost+found bootflash://module-4/vdc_6
  bootflash://module-4/N7700-S2-dk9.6.2.12.bin bootflash://module-4/vdc_7
  bootflash://module-4/N7700-S2-kickstart.6.2.12.bin bootflash://module-4/vdc_8
  bootflash://module-4/scripts bootflash://module-4/vdc_9
  bootflash://module-4/vdc_2

  but I'm not able to assign variable initialization module, I see 1 - sup and sup - 2 only

  XXX (config) # boot system bootflash://module-4/n7700-s2-dk9.6.2.12.bin?
  
  SUP-1 input sup-1 to set up the 1st sup
  SUP-2 input sup-2 to set up the 2nd sup

  I hope that you would be able to help!

  Happ new year as well! :)

  Hello

  Do you have these linecards at the same time? I see that module 1 is the same model and do not have any problems. Did you open a SR of TAC for the same thing? I saw some similar cases where these messages could be the result of a faulty hardware, but you can open a folder of TAC to continue the investigation.

  HTH,

  Wes

• Record of equipment for the Cisco AnyConnect client NAM module

  Hi all

  Forgive me if this has been asked before or on the Cisco site somewhere (I could just find)

  Are there hardware specifications for the Cisco Anyconnect Network Access Manager module?

  Where can I find what wifi chipset is compatible with?

  Thanks in advance for your answer.

  Compatibility with the NAM module is based on the chipset not guest OS. The current operating system compatibility is listed here.

• Is it possible to put the speakers as the default output for the sounds of Windows and the headset as default device for music?

  Hello

  Is it possible to have all the sounds through the speakers, including music from WMP and WMP music in my headphones? Headset is USB (but I also have a Jack) and my speakers are with 3 Sockets at the back of my pc.
  Thank you.
  Friend,
  Zoenvisje
   
  Original title: all sounds through loudspeakers and music through headphones

  Hi zoenvisje,

  Thanks for posting your query in the Microsoft Community.

  Want to know if it is possible to play any sound on the computer with the headset. It can be difficult when something that is important to you does not work as expected.

  Method-

  It is not possible to make these changes on the computer.

  You can set a default speakers and use a different music player that supports select the default output as the headset device.

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Am I eligible for the bridge?

  I currently have Adobe CC in it LR one level of PS. The bridge is free for me to use? I asked a month ago and I was told that I have to upgrade to a higher level of subscription.

  Blog of Jeffrey Tranberry:

  "You get all future updates for Lightroom and Photoshop /Bridge, as part of your membership."

  Photography Photoshop program now available (UPDATED) | PHOTOSHOP.COM BLOG