MS Win 2 k 8 and B200 M2 blade holder

Similar Questions

• Are there 3 partitions in iconia W510 win 8, primary, restoration and mbr partitions?

  Are there 3 partitions in iconia W510 win 8, primary, restoration and mbr partitions? I'm freezeups and other defects. I tried recovery and saw what looked like 3 partitions. tried to format the C: drive then tried to reload the dvd.still system's glitches and lost 2 partitions I think. The dvd system to recharge the three partitions, I see only a concert now about 15 of 32 GB HDD?

  There should be three partitions, there are questions that may appear if you try to use the reocvery disks without removing all three first. Since you are in the State in which your old system went to format C, just wipe the rest of the partitions off the power and run the DVD for a reboot to the original. It will create the partitoins suitable for you. Once everything is back now you can search here for suggestions about deleting the recovery partition (if you have several gigs in size) in order to free up space, because this partition is not necessary if you have the recovery DVDs.

• Where to find drivers for Win Vista LAN, BT and Wifi for Aspire V3 - 571G?

  Where to find drivers for Win Vista LAN, BT and Wifi for Aspire V3 - 571G?

  

  Try this, 100% reliable Web site:

  http://www.station-drivers.com/index.php/downloads/func-startdown/633/

• How can I unlock the 427 udp port. I'm under win 7 with firewall and microsoft security essentials. No firewalls or additional security software

  How can I unlock the 427 udp port. I'm under win 7 with firewall and microsoft security essentials. No additional firewall or a security software when I go to the microsoft security essentials in the start menu, I can't find any reference to the ports.  I can't printer to work on the wireless network, even if the printer says that it is connected to the network.

  Hello

  Start the firewall of Windows listed in administrative tools.

  Create a new rule to open port 427.

  Carlos

• Win 7 (64) "sleep" and "hibernate": power supply for USB devices

  Hello: Just ordered a new PC with Win 7 Ultimate (64) and I need advice on creating a power plan. I learned the hard way with Vista Ultimate (32) that "sleep" and "hibernate" cuts the power of USB, such as UPS devices with battery backup. It was a bad function, since my UPS runs the software that automatically stops the system if necessary. However, when the Vista computer went to 'sleep', the connection to the ASI has been cut, while the UPS is no longer communicates with the central unit. Therefore, if stopped and directed were needed when the system is idle / "asleep", UPS might not make it. The only solution I could find was to create a custom power plan that stops the CPU (and that only updates the display on screensaver for X minutes and then turns off the screen). Obviously a question of wear for the system, being never in mode 'sleep'. Windows 7 behaves similarly, depriving USB power in "sleep" or "hibernate"? Will I need to apply the same workaround? Please notify. Thank you! daledoc1

  Right click on the USB device device manager concerned and select properties then power management and clear the option to Turn off energy-saving and activate the option to wake up from its sleep.

• Controller board and B200 M3

  Hello

  What is the controller board? What do I do?

  I need to upgrade a UCS field with 12 B200M3 at UCSM 2.2(1b): do I have to upgrade the controller card?

  which version is right: 11, 5 or 8?

  Any information on edge controller is welcome.

  Thx a lot.

  ARM

  Nicolas.

  PS: pictures as an attachment.

  Hi delahais,

  To answer these questions,what is the controller board? what should I do? Take a look at the link below.

  https://supportforums.Cisco.com/document/29806/what-BMC-and-what-are-TAS...

  I need to upgrade a UCS field with 12 B200M3 at UCSM 2.2(1b): do I have to upgrade the controller card?

  Whenever you upgrade the firmware of your UCS environment is recommend that you upgrade all of the UCS components including the components of the blade as the BMC

  which version is right: 11, 5 or 8?

  It depends on the version of the firmware that your UCS environment is running. For example, if your ucs environment is running firmware version 2.2 (1) and you have b200 m3 blades you want to select later who is 11.

  You can check the correct version by going to the package of blades bundle UCS in UCSM (see attached screenshot)

  Let me know if you have any questions, and if this is the information you were looking for.

• Hi, I'm Amir Ahmad Amiri 16 years of Afghanistan, my windows is Win 7 home Premium, and I have a usrer of the admin who is protected by myself.

  Hi, I'm Amir Ahmad Amiri 16 years of Afghanistan, my windows is Win 7 home Premium and I have a usrer of the admin who is protected by myself and I forgot the password of the user account of the said. The guest account is disabled and I have no CD to repair. Please help me!

  There are a lot of options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

  A Windows repair CD is absolutely essential if you decide to do maintenance on your own PC. It takes only three minutes to burn a via the control panel / backup and restore. You have these options:

  • Burn it on another computer.
  • Borrow one from a friend.
  • Purchase one here: http://systemdiscs.com/

• I have a win 7 dvd retail and I did clean install and says now I can't activate

  I have a win 7 dvd retail and I did clean install and says now I can not activate because I only have a dvd upgrade how do I clean win 7 off the coast to put xp on and do it all again

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• upgraded from VISTA to WIN 8/8.1 and I get hardware failure NMI shocks every day

  upgraded from VISTA to WIN 8/8.1 and I get hardware failure NMI shocks every day:

  problem started when I upgraded to WIN 8.  I get the dmp file but I don't know what to look for.

  I tried an error: see attachment

  I use a DELL optiplex.

  John

  Hi John,.

  Thank you for your response.

  This issue may occur if a computer hardware component is damaged, malfunctioning, or if an incompatible driver is installed on the computer.

  I suggest you follow the methods and check them off below if it helps:

  Method 1: I would say that you want to run cleanup start and check if it helps.

  https://support.Microsoft.com/en-us/KB/929135?WA=wsignin1.0

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of Kb to start the computer in normal startup after's article have solved the problem.

  Method 2: I suggest you install the latest video drivers on the manufacturer's Web site as below.

  http://www.Dell.com/support/home/us/en/19/products/?app=drivers

  F or make reference to follow the article below you.

  http://Windows.Microsoft.com/en-us/Windows/install-upgrade-activate-help#install-upgrade-activate-help=Windows-8&V1H=winrttab1&V2H=win8tab1&V3H=win7tab1&v4h=winvistatab1

  Hope this information is helpful and let me know if you need additional assistance.

  Thank you.

• My Win 7 PC died and I had to buy a PC Win 8.1, is it possible for me to reinstall that version to the new PC Win 8.1? Thank you.

  My Win 7 PC died and I had to buy a new PC to Win 8.1, is it possible for me to install Photoshop version 5.1 on my new PC 8.1 Win? Thank you very much.

  This page contains the link. Amine down a bit to find

  Download Adobe CS5.5 Trials: Direct links (no Assistant / Manager) | ProDesignTools

• About discovery M1 B200 UCS blade - Bug found with 1.4(2b)

  Hello

  I m test some hardware UCS composed to interconnect two 6120xp and two chassis, each chassis have two blades One is B250 M1 in Slot 1 and 2 and the other are B200 M1 in Slot 3

  I was at one point running the B200 M1 blade in each chassis without any problem until the time came to test XenServer. After that I was done with the test I driving the service profile I believe before you turn off the blade.

  From there curiously service profile was unrelated, but I couldn't turn off the two B200 M1 blade, so I tried to reset the and I even had to reinstall the two blades. Once those two servers were never available, always on and cannot be turned off with the following status, when occurs a discovery

  Overall State would be ' discovery-a failed ' and the current task status details shows:

  "Configuration of the main fabric interconnection access to Server 2/3 (WSF-STADIUM: sam:dme:ComputeBladeDiscover:ConfigFeLocal).

  The WSF, I get the following:

  Result of remote Invocation: end-point-not available

  Remote Invocation error code: 1002

  Remote Invocation Description: port remote eth (2/1/2) is not created

  Any help is appreciated. I spend a lot of time trying to find something on the Cisco technical support site or forums without success.

  Thank you

  Maher

  I just open a TAC case on the same issue.  It is caused by a bug fixed in 1.43i - background process cause more queue MTS block. (CSCtq03411).

  Temporary workaround until you can update is to ssh in the interconnection and connect to the local-mgmt and deliver orders pmon stop and then start pmon.  This will cause an interruption of service.  No configuration change is possible until this is done.

• my phone has port and new battery and still will not hold a charge

  my phone has port and new battery and still will not hold a charge

  What do you mean 'there port and new battery? If someone other than Apple has opened and replaced the things, it is now unbearable.

• NB550D - best way to install Win 7 64-bit and 64-bit drivers

  Hello

  I improved my NB550D to Windows7 Home Premium and installed 4 GB of RAM.
  This works much better, but want to go further and make a Windows7 Ultimate _64bit_ _clean install_ in order to take full advantage of theupgrade in RAM.

  My question is: what should I do about the Toshiba drivers for 64-bit? I guess I'm going to need some?

  What is the best way to go about the upgrade - any help will be appreciated! : D

  If you need to switch to Win 7 64 bit, then you need some Win 7 64 bit drivers.
  On the European driver Toshiba page, I could find some 64-bit drivers, but it seems that not all Toshiba for Win 7 64-bit tools are released.

  Drivers for WLan or BT stack can be found here:
  http://APS2.toshiba-tro.de/WLAN/
  http://APS2.toshiba-tro.de/Bluetooth/

  Other drivers or Toshiba tools such as value added package or Face Recognition, Eco utility and others could be used with other series of portable for example by Satellite C660D or others such as L750D, L755D or C670D
  Surely you must pay attention to the integrated graphics chip, the LAN or the chipset
  Use the drivers that are released for fleas in NB550D

• Satellite U840W PSU5XA - Win 8.1 installation and effective use of SSD

  Hello.

  IM in the hope of a solution to the two questions.
  The second that I suspect is caused by the first.

  Satellite U840W PSU5XA-001006

  Has started getting the BSOD with various defects.
  The most persistent has been IRQ LESS or not EQUAL - iaStorAV.sys

  Many hours of research and I can't find a solution or post did the extension "AV" the iaStore.sys...

  So I have provided zero factory (BSOD) issues have persisted.

  So, I Clean installed Windows 8.1 directly above everything and removed all previous records.

  I noticed that the system was not working all utility brand TOSHIBA factory etc. and seemed to be much slower. I suspected that this was caused because of the 32 GB used SSD as Cache has apparently been bi-passe and now everything worked strictly on the 500 GB HARD drive. I don't remember BSOD, but the system has been significantly slower on the start-up and performance.

  (SIGH), I even once reset to factory settings, and it gave me back TOSHIBA utilities such as gas stations of the brand.

  HOWEVER, the BSOD remained, and once the upgrade to windows 8.1 MAINTENANCE of files and settings, the iaStorAV.sys error is returned (specifically when closing lid in mode "standby") forcing the CRITICAL error and force the system to restart instead of awakening from sleep.

  Note: Windows is a legitimate copy of MS, so it's not the question. More strange, it's that 8.1 installation had run at least 8 months no problem before sudden BSOD Page file and iaStorAV errors. Readings and messages have believe me MS Updates to bee the culprit here for the start of these issues.

  I read a similar post regarding RAID CACHE PRIOR to 8.1 Windows Installer. My intuition tells me that these two can only be related. that is if windows was incorrectly installed RAID cache, CACHE is not in strored properly and causing BSOD. Im a beginner at this stuff, so be patient...

  What I really want to know is, how now can I Factory Reset Windows 8, make it positive to the 32 GB is used as CACHE and help etc. fastboot, then pass safely to 8.1 Windows?

  Any help would be greatly appreciated.

  ATTEMPT of THINGS ALSO: TSRI and RAID re - install, memory (success), updated BIOS to 6.70, Diagnostic fast storage re-installed drivers

  Thanks in advance,
  Mr. frustrated...

  iastorav.sys is part of the technology Intel Rapid Storage Technology driver.
  The BSOD appears to be related to this pilot and is therefore the first step which I recommend: update the Intel rapid Storage Manager driver.
  The latest version should be available on the Intel driver page.

  If you use the Toshiba Recovery disk or the HARD drive recovery process, you will get the same system and State of the laptop computer as on the first day of purchase. In this case, the system must be configured correctly.

  But if you have deleted or replaced the HDD / SSD in the past, then the RAID configuration is lost and must be rebuild with special tools / software and the procedure.
  This can be done ONLY authorized by the service provider.

  By the way: the upgrade to win 8 to 8.1 Win has been very well described in this Toshiba HowTo doc:
  http://www.MyToshiba.com.au/support/items/how-to/823

• What version of Firefox options do I have to use Firefox on the new laptop running Win 7 64 bit, and how do I move bookmarks current laptop running Firefox 3.5.13 again laptop?

  Currently running on the laptop using Windows XP pro sp3 Firefox 3.5.13 and want to move my favorites to a new laptop. New laptop using Win 7 pro 64 - bit OS. I've read too many conflicting reports on Firefox and Win 7 and Firefox works on a real 64 - bit version. What are my choices for a stable browser for the new laptop and what specific version of Firefox is recommended, and the advantages and disadvantages of this suggestion? (I think we can run Firefox 32-bit version in the 64-bit environment, but which is the best choice?) I have not installed Firefox on the new laptop yet and am eager to dump IE. It is displayed for my old laptop. Thank you...

  Mozilla working on a 64-bit version of Firefox, but it's a way off. Currently, the only release versions are 32-bit, and the next major version will be also only 32 bits.

  I recommend that you install the latest version of publication (3.6.10) available since http://www.mozilla.com/

  To copy bookmarks, follow the procedure described in the article restore bookmarks from a backup or move them to another computer to save a json file, you can import (restore) on the new laptop. You can copy more bookmarks, for details, see back up and restore the information contained in the Firefox profiles and backup - MozillaZine Knowledge Base Profile. The last link includes a third-party utility that can make the process easier.