Firmware for the F348XP - N77 - 23 Nexus module problems
H,
I hope you had great Christmas time! I am currently working on the new Nexus lab, and I have a challenge.
I try to get 1/10 Gbit / s Ethernet Module running. Do you know where to find firmware for this module and how to set the variable initialization for her? What I get so far:
introduce the module:
Status of Module Type mod Ports model
--- ----- ----------------------------------- ------------------ ----------
1 48 1/10 Gbit / s Ethernet Module N77 - F348XP - 23 ok
2 48 1/10 Gbit / s Ethernet Module N77 - F348XP - 23 powered-dn! This one, with that I'll have the problem
3 0 active supervisor Module-2 N77-SUP2E *.
4 0 supervisor Module-2 N77-SUP2E ha-standby
When I try to turn it on by entering
(config) # No module poweroff 2
I'm more about newspapers:
2015 Dec 16 00:38:23 % xxx platform-2-MOD_DETECT: Module detected 2 (serial number JAE19290A6J) Type of Module-1/10 Gbps Ethernet Module model N77-F348XP-23
2015 Dec 16 00:38:23 % xxx platform-2-MOD_PWRUP: Module 2 under voltage (serial number JAE19290A6J)
2015 Dec 16 00:38:23 % xxx platform - 5 - module MOD_STATUS: Module 2 - current situation is MOD_STATUS_POWERED_UP
2015 Dec 16 00:40:02 xxx % BIOS_DAEMON-SLOT2-5-BIOS_DAEMON_LC_PRI_BOOT: System started from the main BIOS Flash
2015 Dec 16 00:40:05 xxx % FW_APP-SLOT2-2-FIRMWARE_IMAGE_LOAD_ERROR: error extraction and loading Firmware: firmware Flash and software images are bad
2015 Dec 16 00:40:06 xxx % MODULE-2-MOD_FAIL: initialization of the module 2 (serial number: JAE19290A6J) failed
2015 Dec 16 00:40:06 xxx last message repeated 1 time
2015 Dec 16 00:40:06 xxx % PLATFORM-2-MOD_PWRDN: Module 2 power off (serial number JAE19290A6J)
2015 Dec 16 00:40:06 xxx % PLATFORM-5-module MOD_STATUS: Module 2 - current situation is MOD_STATUS_CONFIGPOWERED_DOWN
2015 Dec 16 00:40:06 xxx % PLATFORM-5-module MOD_STATUS: Module 2 - current situation is MOD_STATUS_POWERED_DOWN
I take the problem is with the firmware, but I can't find the path to it. It there is no defined variable initialization is module 1, or 2, but module 1 started without problem.
XXX # display the start module 1
No set variable initialization module
XXX # display the start module 2
No set variable initialization module
I can see the bin files under
XXX # cd bootflash://module-4/
bootflash://module-4/20150808_221923_poap_7580_init.log bootflash://module-4/vdc_3
bootflash://module-4/20151211_010151_poap_8037_init.log bootflash://module-4/vdc_4
bootflash://module-4/20151211_015441_poap_7723_init.log bootflash://module-4/vdc_5
bootflash://module-4/lost+found bootflash://module-4/vdc_6
bootflash://module-4/N7700-S2-dk9.6.2.12.bin bootflash://module-4/vdc_7
bootflash://module-4/N7700-S2-kickstart.6.2.12.bin bootflash://module-4/vdc_8
bootflash://module-4/scripts bootflash://module-4/vdc_9
bootflash://module-4/vdc_2
but I'm not able to assign variable initialization module, I see 1 - sup and sup - 2 only
XXX (config) # boot system bootflash://module-4/n7700-s2-dk9.6.2.12.bin?
SUP-1 input sup-1 to set up the 1st sup
SUP-2 input sup-2 to set up the 2nd sup
I hope that you would be able to help!
Happ new year as well! :)
Hello
Do you have these linecards at the same time? I see that module 1 is the same model and do not have any problems. Did you open a SR of TAC for the same thing? I saw some similar cases where these messages could be the result of a faulty hardware, but you can open a folder of TAC to continue the investigation.
HTH,
Wes
Tags: Cisco DataCenter
Similar Questions
-
Cannot find the latest firmware for the Toshiba 40TL838G
Hello
I am trying to download the latest firmware for the 40TL838G model, but I'm not.
Where can I find it?
Thank you.
The same has been asked in this thread
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=73914We can receive the update only via a network update
In which case you will not receive updates via the network, your firmware is up to date. -
What is the latest firmware for the A65 Alpha as of February 17, 2013
From this date, Version 1.07 is the last update of the firmware for the camera I AM-A65V. It can be downloaded from the Sony eSupport at http://esupport.sony.com/LA/p/model-home.pl?mdl=SLTA65Vsite.
If my post answered your question, please mark it as an "accepted Solution". This will allow users to more quickly find verified solutions.
-
Need new firmware for the drive (Mat * un UJDA750)
I have a Satellite M30 with a carpet * a player combined UJDA750. Anyone know where I could get a new firmware for the drive?
THX.
Hello
I put t know why you need a firmware for your combo drive.
As far as I know the carpet * a combo UJDA750 driver works with the Windows driver very well.Good bye
-
When comes out the next firmware for the "rocket"?
When comes out the next firmware for the "rocket"?
Sometimes in the coming months
-
Updates firmware for the isa550w
y at - he's going to be more updates of firmware for the isa550w or a cisco decide to stop making the deadline of November 14, 2014? I know that this product is reached it's end of life cycle soon not if cisco decides to make the updates of firmware for this product earlier than November, it would be good to know
link to your solution two to the following: -.
http://www.Cisco.com/c/en/us/products/collateral/security/small-business...
-
Hello, I've just updated my Photoshop for the most recent version, Im having problems with flow tool, is - that someone is having this problem too?
Hi tonyc75479545,
Greetings.
Please check this thread - Photoshop CC 2015.1 liquefy lightens the result on the 16-bit per channel images
Concerning
Rohit
-
I need the firmware for the Toshiba excited AT7 B618
Hello
The Tablet keeps showing a message
Unfortunately, it stopped secret lock
Ok
When I press OK it comes again.
I fact (power + key) factory reset, but it does not solve the problem.
I installed antivirus it found 7 threats, but he did not remove it because it becomes the vendor applications. Viruses that are present in the backup.
I need the firmware image to excite at7 - B? Please reply with the download link.
Device name: AT7-B618
Unit number: PDA0HV-002004AR
Product group: TOSHIBABest regards
Department of health Shair
Thank you
I have the same problem, why not support a large company like toshiba product, why I can not download a firmware for AT7-B618?
Please I need this firmware
Best regards -
Firmware for the SSD THNSNJ128G8NU
Hello
I can't download the firmware for my SDS: THNSNJ128G8NU
My laptop is a msi Ge72.
Can you help me.Thank you
I think that this firmware update is not yet available...
Where new firmware is available, you should find it on this page:
http://Toshiba.SEMICON-storage.com/e...t-SSD/Hg6.html -
New Firmware for the 32TL933 3D LED
I found at this address 'http://www.dl.toshiba.com/DLY/index.jsp?region=GB&lang=FR', a new firmware for
32TL933G (G for the other Europe).is it compatible with my 32TL933F (F for France)?
Thank you
Good question.
If nobody here can offer you the right answer, I recommend you contact the France Toshiba service provider and ask them. They have direct contact with Toshiba France and can verify this information or perhaps send you a most recent and the most recent update for your Toshiba TV.By the way: you have problems with your TV?
-
New firmware for the required SSD THNSNC256GBSJ
Can I get a new firmware for my model THNSNC256GBSJ s/n 51GB50HNK6LK SSD
8.1 x 64 installed on my Windows System.To my knowledge, an update of firmware for THNSNC256GBSJ isn't available.
But why are you talking about firmware update?SSD drive is recognized in the BIOS?
If so, you don't need any SSD firmware updates to install Win'a 8.1 -
Re: Satellite Pro A300D - firmware for the DVD player?
Hello
I recently got a nice new Satellite Pro A300D of my work and was just my typical thing to go through the update of their efforts. However, when you try to update the firmware of the DVD drive for my particular model (PSAK9E-00C003EN), I realized that the firmware he suggested was wrong. After watching on my pc, I discovered that my drive is Pioneer DVD - RW DVRTD08A (1.50), but I can't find information anywhere on the net about the updates of the firmware (or the existence of this drive at all!). Could someone point me in the direction of some information and firmware more recent if it exists?
Thanks for any info that someone has!
Willybob
Satellite Pro A300D was equipped of various CD/DVD players.
On the Toshiba driver page, you can find an update of the firmware that came out for a CD/DVD drive that was not installed in your laptop and so you can not install this update.If you are unable to find an update of the firmware of your CD/DVD drive, then an update doesn't exist and is not necessary!
-
Restriction of firmware for the HX Series
Hello
HX Series release notes describe the latest version of the firmware shipping below.
https://download.Lenovo.com/servers_pdf/lenovo_converged_hx_series_release_notes.PDF
Available hardware implement uEFI 1.1 (TCE106KUS) and 1.72 IMM2 (TCOO10H).
Can update us the firmware to the latest version? or do we have no restrictions to HX Series? (lik stay level firmware to AVS/Foundation combination)?
May 2016, uEFI last 2.01 (TCE122W) and 2.50 IMM2 (TCOO16P) are released.
Release notes, "you must pass the Nutanix OUR version 4.5.2.3 or later in order to enjoy some patches critics." are described. If we ugrade latest uEFI/IMM2, do we need to update OUR Nutanix first, then updated the firmware?
Because the previous note of support (to Fib 2016) had a similar description, but OUR Nutanix version isn't 4.5.2.3 4.5.2. So I want to know any restrictions (or relationship) for the system and update of uEFI/IMM2 firmware.
Thank you.
Hi, Mike.
Thank you youre replay and ok I understand.
We should update OUR 4.5.2 or later to the beginning and after that, we are able to update version uEFI/IMM2 version shipping factory at latest. There is no dependency on a specific version of OUR.
-
bugs in firmware for the photo frame digital df800b2
http://h30434.www3.HP.com/PSG/board/message?board.ID=Other1&thread.ID=47> I have the same frame and the same question! I tried the solution and it did NOT solve my problem. Pictures are not displayed in sequential order (they jump around a bit in sequential mode).
used file names...
001_MG_2755.jpg
002_MG_2756.jpg
003_MG_2757.jpg
004_MG_2758.jpg
... etc...
By any measure, these are sequential file names!
I understand that there is a firmware update available, according to the comments on other forums. Can HP please post the updated firmware for this forum or PM it me at least? There are many bugs in the firmware originally supplied with the chassis and I think HP should blithely seek to make their customers happy with the purchase of HP products! This firmware update should be available.
My framework model is "df800b2-16". I can provide S/N on request email from HP, if that's what it takes.
----------------
As an experiment, I even changed all the names of the file 001.jpg, 002.jpg, 003.jpg... etc.
He still jumps around (jump 2-3 images back anyway - not 100% sure how, but clearly to jump some photos) and about runs in the REVERSE order. (Top number first!)
This is clearly what is expected in a "sequential" display of images!
------------------
Next experiment was to 10 images with the name of the file (number) on each image... 001.exe jpg by 010 jpg file names.
Value sequential mode, 5 seconds interval, no transition, read CF card, I get the following "sequence":
5,4,6,3,7,2,8,1,9,10, 5,4,6,3,7,2,8,1,9,10... (repeat this pattern - sequential sentence!)
Please send/post fixed firmware!
Appreciated your fast response!
Finally got solved... see this other thread:
http://h30434.www3.HP.com/PSG/board/message?board.ID=Other1&message.ID=514#M514
-
updated firmware for the clip and clip +.
Hello
I have an old Clip 4 GB firmware v 01.01.29A and a Clip + 8 GB firmware v 01.02.15A. I see that these are outdated versions and newer versions are available. I've never updated the firmware, so I was reading the messages to see how. Here's my question; I read that to remove FM Radio you should 'drop' the 'A' in the update. I see that the updates do not have the letter 'A' affixed. This doesn't mean no FM Radio more if I update the firmware for both of the clips? I don't want to lose the radio.
Thanks in advance for any help
I wouldn't bother with updating the Clip +. There is very little has changed since the version.15. It's the one I always use on mine.
No, you won't lose the FM radio by updating the firmware. You must have read some old posts.
Maybe you are looking for
-
Why I do not have a button "nearby", after the upgrade to watch OS 2.2
Why I do not have a button "nearby", after the upgrade to watch OS 2.2
-
How to run the economy of energy without administrator rights
How can I use the saver of current (V6.00.04) with a user without administrator rights (Windows XP) account? When I login as a 'normal' user icon of the lamp is not in the system tray. When I try to start the manual I get the error message that I don
-
Replace HARD drive without DATA Patition
Hello I would like to change the disk HARD original for a 128 GB SSD.I ve two DVDs of the DATA Partition recovery.Now, I want to recover my Windows 7 for the new SSD but without the DATA Partition.It should only be a single partition on the new SSD.
-
OfficeJet 4500: Capture and scanning Hp cannot find the device
I can print on my printer without a problem, but when I tried to run Capture and scanning HP, he invited to select a device and then could not find it. I even entered the IP address and it says that no device was found. When I ran everything in a rem
-
HP probook 470: if I open my laptop I have the warranty?
My laptop recently got an error that it is overheating so I'll try to clean the dust inside, but if I open it to this procces will I void the warranty?