Output Module preferences

Similar Questions

• After effects CC output Modules to render only Machines

  Hi there, I have a problem with the custom output Module Templates and my cluster:

  After Effects CC 12.0.0.404 (also showing up-to-date cloud Creative)

  Mac OS X 10.8.4 (Mountain Lion last version)

  Mac Pro 2.93 GHz, Radeon 5870 8-Core, 32 GB RAM and with Blackmagic Decklink Extreme 3D +.

  Remote Machines (there are four) are Mac Pros (Quad-core, running 10.7.2 with 16 GB of RAM), by using the ae_render_only_node.txt file in their folder of user Documents.

  The exact error:

  aerender ERROR: no output to the name module model were found.

  I try to get a cluster working with After Effects CC (see exact version above). Unfortunately, I need custom output modules, and I can't seem to get the slaves made to recognize. I found older sons on this particular issue, but no solution has been found.

  I use commandline aerender in OS X terminal to start a render with a basic test scene.

  To simplify things, I tried to test this on a single machine, rendering both slave... Same result everywhere.

  Here is what I tried:

  I have exported a file of .aom of my main machine (where I have my desired custom output Modules) and attempted to bring on the slaves of rendering. However, because the slaves of rendering are return only, (they ae_render_only_node.txt in their Documents folder), the ability to import Modules output is disabled in After Effects (it opens as the rendering engine of the effects after and modify > Templates menu is grayed out).

  Then, I thought I would try to copy the main machine (user) /Users/ / Library/Preferences/Adobe/After Effects/12.0 folder to render slaves, thinking that would get any other file in preference to them to define the output modules. No luck. Launched After Effects (which loads as renderer after effects) and reset my preferences to disk cache (so they were not always of the main machine). Tried again aerender... no luck. Same error:

  aerender ERROR: no output to the name module model were found.

  After that, I thought it would be a good idea to log out of Adobe Creative cloud on the main machine and try connecting the machine slave made with my UserID and password and temporarily remove the ae_render_only_node.txt file. Then I would import the .aom file in the full version of the AE... I tried this and success! The work of renders... they find the output without problem Modules. Only it is, as soon as I log out and switch between using the ae_render_only_node.txt file, the output Modules are not found. Don't know what's going on--if the output Modules are currently disabled by the ae_render_only_node.txt file? Or maybe signature out of my Adobe ID is to remove preferences that determine the output Modules? Don't know where the output Module preferences are stored to be able to tell.

  Next attempt: I thought that I would try my preferences with creative cloud sync. I made sure to check synchronization preferences after effects to ensure that the output Modules are configured to synchronize. I did a sync where I transferred my preferences of the main machine. Then, on the slaves of rendering, I ran synchronization preferences and chose to download preferences. Works when connected, but not when it is used as a single render node. When it comes to a single node returned, he even invites me to download synchronization preferences and exit the Application, which I do, but nothing seems to happen. I retry aerender and still the same error:

  aerender ERROR: no output to the name module model were found.

  I can't seem to find any info on where the output Modules are actually stored (apparently they are not anywhere in the user/Library/Preferences/Adobe/After Effects / folder?). Visited only nodes not allowed to have custom output Modules? Not even for something as simple as the multi-machine with an action sequence post-render set enabled Proxy?

  Any help is greatly appreciated!

  Thank you.

  Today, we released update after effects CC (12.1), which fixes this bug.

  Let us know how things work out for you in the updated version.

• Not presented in the CC 2015 bridge output module

  I've recently updated all my CC applications and have Adobe Bridge CC 2015 6.3 version, but the output module was gone. I followed the instructions provided by Adobe on how to install the output Module once again, however it does still not show upward in the application?

  I tried to uninstall and reinstall the program (and extensions) with no luck.

  I know about final save these in the correct folder because I copy and paste the location of the folder but still I don't get output as an option.

  I think that the fn F4 is a shortcut for the release and when I have this key in the lower left part of the window shows '?

  I just hid no script files and also output on in preferences so now I'm stuck!

  Can anyone help please? It makes me crazy! Especially as I have use Bridge to is the creation of PDF thumbnail image!

  Thanks in advance...

  I think I see the problem.

  Going to Adobe Output Module workspaces in the Workspaces folder

  

• I downloaded the bridge output module and copied the files to the correct location but the output pane remains empty

  I downloaded the bridge output module to create contact sheets and copied the files to the correct location, but the output pane remains empty.

  I removed and replaced the files including the! $AdobeOutputModule file $ but still no luck...

  I have reset the workspaces, preferences...

  How can I completely remove it and start again?

  Thanks in advance!

  Settled myself

• CC bridge output module crashing

  Hello

  I recently upgraded the bridge to the latest version and installed the Adobe Output Module according to the information here: https://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html

  The problem is when I went to restart Bridge and open the program, it bounces once as if he is about to open and has a small dot below and then immediately blocked (stops bouncing, dot gone).

  When I delete the folder with all of the Workspaces folder preferences and just leave the file .workspace, Bridge opens, but obviously the output module will be empty and unusable.

  I'm on a Mac (10.10.5) with the most recent version of the bridge.

  Any help would be greatly appreciated! Thank you!

  Hi devonh,

  Please reset the Bridge preferences and then try it.

  Measures

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  ~ Mohit

• Made settings and output module - Windows 7 default file location?

  Hi all

  Confession: I'm generally confused about render settings and output modules, so forgive me if this question seems stupid.

  Issue 1: Where AE stores the default render settings and output module files (I'm on Windows 7)? I want to save a copy of these in the case where I spoil them, but can not find the folder. I think these are files .aom and .ars, but I just upgraded my CC 2014, lost all my custom settings and to save the default values before as I have try to load my various custom files to see if I can recover my settings. When I get *.aom or * .ars, I can't find the settings to 'default' of late in 2013 (I think there is a more recent version somewhere.)

  Thanks in advance,

  Lori

  They are in the same folder as the file of the General preferences and the keyboard shortcuts file. You can open this folder by clicking on the button at the bottom of the Preferences dialog box.

  But there is no need to save the default values. If you delete the render settings or output module settings file, After Effects will recreate just the default values.

• Bridge cc 64-bit, cannot install the output Module, help

  Hello

  Why is so hard to install the output module

  I've done all Install Adobe Output Module

  and when I close the bridge and restart it asked me if I want to add the output module, I asnwer Yes

  I have the outpot workspace, but when I click on it, nothing,

  I tried to delete the files in the output module, load brige cc, close-> re - install the output module

  nothing that I can not have the module output

  Why is so hard to leave work?

  can I ask?

  do you not reset preferences could help?

  in this case, how can I save them?

  I have run the last version of bridge cc, cc of photoshop 64-bit w8, 1 pro 64-bit

  Thank you

  Hello

  After reading the Forum without luck

  I found the solution at least for windows

  inside the AOM_Package_Win64 in my case because I installed only fill 64 bit

  There are

  Adobe output module

  AdobeOutputModule.workspace

  copy/extract the folder Adobe Output Module-> Extensions from C:\Program Files\Common Files\Adobe\Bridge CC

  copy/extract the AdobeOutputModule.workspace file-> in C:\Program Files\Fichiers Files\Adobe\Bridge CC Extensions\Workspaces

  
  

  launch bridge

• Lost output modules

  I have recently updated from CS3 to CS5 and I can't find the output the Modules of CS3 to transfer to CS5 (rendering parameters are gone too). They are not in a presets folder. If I open CS3, the modules are here and I can use them, but I can't find them. Spotlight can't find them either. Does anyone have advice to help me find them?

  TIA

  Output Module templates are not saved as separate files.  (The data are incorporated in your preferences file).  You can save your custom of After Effects CS3 as one output Module Templates. File AOM, which you can then import into After Effects CS5.  For more information, see the "create, manage, and change the output module templates" section of the article "output modules and output module settings" using After Effects.

  Note that due to changes made to how After Effects CS5 stores data for some formats of output (including MPEG formats), some models of previous versions output Module import does not entirely in After Effects CS5.  In this case, you will receive a warning during the opening of the. File AOM and the format for these model-specific settings will be reset to the default values.  You can manually change the model in CS5 to match the settings of the previous version.

• Impossible to get H.264 output module

  I don't find the H.264 output module in my After Effects software. How can I make this model available for output. All tips are welcome.

  Kind regards

  Andranik.

  It was removed from CC2014. What version do you have?

  Maybe this can help you:

  Basics of make or export to after effects CC

  It deals with this subject and much more:

• Bridge CC with El Capitan 10.11.6 output module

  Hoping that someone out there might have a solution to the following problem:

  Try to get the output module to work with my CC bridge (most up to date available download) and problems. Production appears in space work, but when selected, no longer gives any options (I'm trying to use the program to create a contact in PDF to images sheet).

  Have reset the workspace and tried to locate the !-$$$ AdobeOutputModule.workspace file on my drive hard to remove, but had no luck.

  Reading through the information on the module - it is said in the media which is for Mac OS (10, 6 - 10.10), does that mean my (El Capitan 10.11.6) operating system is as up-to-date as it is not compatible?

  Jess x

  Hi Jess,

  Please use this link to download bridge CC 2015 version 6.3 How to install Adobe Output Module in bridge CC

  * Note: Make sure that the bridge is closed before installing the output module.

  1 double-click on the downloaded file to decompress. Open the AOM_Package_Mac resulting

  This folder contains:

  The folder Adobe Output Module

  The AdobeOutputModule.workspace file

  2 copy the folder Adobe Output Module (not the folder AOM_Package_ [OS]) in the 2015 CC bridge Extensions folder to the appropriate location:

  Mac OS: cc/Library/Application Support / Adobe / Bridge CC 2015 Extensions (here, the library refers to the library system, not the library user on Mac OS X)

  3. copy the file AdobeOutputModule.workspace in the folder workspaces under the folder of the bridge CC 2015 Extensions (same folder referenced in step 2).

  Concerning

  Sahil

• Bridge output Module - no Web Gallery

  I installed the version 6.3 of the ADM on bridge CC 2015 and still cannot produce anything with the Web Gallery.

  Installed output Module and tried to create a web gallery. Pictures selected, went with the selections by default and tried Preview in the browser. Safari offers a blank page. Tried other models Web, same thing, until I have try the HTML that gives me something on the page but the thumbnails are empty. I click on one, and Safari crashes.

  Hi Dale,

  It is a known issue and we are working on a solution. In the meantime, if you could try the workaround mentioned below.

  Please, put yourself in the following folder and double-click index.html to preview:

  Mac OS:

  • In the Finder, navigate to the users / [user name] / Library/Application Support/Adobe/Bridge CC/Adobe Output Module/MediaGallery/previewInBrowser1/index.html

  Create a bookmark in your browser to reload the content after clicking Preview in the browser in the Adobe Output Module.

  Kind regards

  Gerard

• On 2015 (6.3) bridge output module - Windows 64-bit

  I realize there is a thread for the same problem on OSX - I just want to make one for Windows users.

  I can't load the module output in bridge - I downloaded the ZIP file that is necessary for 6.3 and installed the file/folder, as I have always done (as it reads) when necessary.

  I even had the pop-up within Bridge at the opening of this new after the update- but the output module is NOT displayed.

  I hope that this is addressed soon!

  Thank you.

  Hi Kevan,

  Please make sure that you have followed the below the article carefully.

  How to install Adobe Output Module in bridge CC

  Please copy the folder Adobe Output Module (not the folder AOM_Package_ [OS]) in the 2015 CC bridge Extensions folder to the appropriate location:

  • Windows: C:\Program Files\Fichiers Files\Adobe\Bridge CC 2015 Extensions

  Then copy the file AdobeOutputModule.workspace into the folder of workspaces under the bridge CC 2015 Extensions folder.

  Kind regards

  Gerard

• Empty output module bridge - OSX CC

  Hello

  I have read other threads on this, but still have an empty output module: Mac, El Capitan, CC. I tried to reinstall, reset workshop, deleting the temporary file. Still, everyone knows this issue. I use it all the time so it prevents my general workflow at the minute.

  Thank you.

  Hi all

  Please make sure that you are referring to the article.

  How to install Adobe Output Module in bridge CC

  

  You must ensure that you access the library from the system and not the hidden library.

  Kind regards

  Gerard

• Updated bridge completely eliminates them output Module?

  Just updated the bridge and discovered that the output module, which I'd only recently risen by reinstalling, is now gone completely.  There is no other choice I can find at the exit of the files multiple/types of files as a Board-contact.  I guess that Adobe wants to let me in another program, but I think it's a dilemma that needs to be resolved.

  I'm on a Mac Pro, OS X 10.11.2

  I think that you can always install it as you did before. There are a lot of people pushing to have this part of the bridge again, without having to do a separate install.

• Photo-jpeg lacks 2015,3 QT output module settings?

  I just installed the latest version of AE (2015.3) on a new computer Win 10. I'm trying to set up the same way, I am using AE on my old computer, but I'm stumped when it comes to rendering. I had a defined output Module that uses the QuickTime format, and the video codec is Photo-jpeg. It was not listed as a codec available in this new facility. So I thought, okay, I have to install QT (even though I was trying to avoid it making).

  So I installed QT, but Photo-jpeg still is not listed. What I am doing wrong?

  Thank you

  Ken

  This article (and most of the others I read on the issue) is terribly exaggerated. For troubleshooting purposes, uninstall QuickTime and reinstall completely. (Just don't browse the web anywhere very suspect and click a QuickTime component, while it is installed.) And try that.