Output of find VISA VISA open resources

Similar Questions

• Find VISA resources

  I have trouble finding VISA resources properly. I have no problem detection instruments that are connected on the GPIB, but after that they have detected once LabVIEW is convinced that they are there for ever more, even if I unplug and disconnect the device! The only way that the list of the connected instruments is reset completely out LabVIEW and restart it. Why is this?

  I'm using LabVIEW 6.1 (but who can not make a difference) and I attach a VI with two ways to detect if one of the four possible instruments are connected. The Subvi is used to give a command to one of the instrument, and it is able to return an error if the instrument is not connected, regardless of the situation. How can it detect the instrument as expected, but the other methods not?

  In this VI, I need detect how much, if any, and that out of four possible instruments are connected. Simple, but amazingly difficult!

  Any help please?

  James

  Well, now that you say is starting to make a little more sense. I misunderstood what you were asking before.

  Jeff Bohrer wrote: what is the selection if you look at "tools > Options > various... > automatically close VISA sessions?

  Help: "automatically close your left VISA open sessions by the application when the first level VI becomes idle. This check box is cleared by default. "This was added at some point (don't remember when), and the default value is True. It caused a lot of sorrow and complaining from users (I was a), so NEITHER changed the default value false.

  As Dennis has pointed out, there is a distinction between the resource and the instrument. When you perform an initial analysis resources will be created. There is no mechanism that automatically detects that an instrument is no longer there. In fact, when you scan for instruments of MAX, she sends * IDN? queries to find instruments. So, you must check for the presence of an instrument by actually trying to talk to her.

• LM500 error-1073807202 old VISA Open in LM - 500 Initialize.vi - > Operate.vi LM-500

  Hi all

  I am new to using labVIEW and I would be really grateful if you could help me with an error.

  I'm trying to control a model LM-500 liquid cryogen level monitor (Discontinued).

  Its drivers are available online and I download and I'm launching the demo.

  When I try to run it I got the following error:

  code error-1073807202

  Former VISA Open in LM - 500 Initialize.vi-> Operate.vi LM-500

  The LM-500 is connected to my computer through RS232 serial.

  I don't know what could be the error. I would appreciate if you could give me an idea about it.

  These are the drivers:

  http://www.cryomagnetics.com/drivers/LM500LV6_1.zip

  Thank you very much for your help

  That's because the new VISA open does not recognize the IO senior class, you must remove and replace it with the new type. Right-click on the resource of visa > Create > control.

  Select the rigtht COM port and try again

• How to find and re - open my custom gadgets after I closed the sidebar?

  Original title: bar side and gadgets

  How to find and re - open my custom gadgets after I closed the sidebar?

  Hi curious boar.

  See the links for the steps open gadgets and more information o how to customize the gadgets below:

  Customize Windows Sidebar:http://windows.microsoft.com/en-US/windows-vista/Customize-Windows-Sidebar

  Windows Sidebar: Frequently asked questions:http://windows.microsoft.com/en-US/windows-vista/Windows-Sidebar-frequently-asked-questions

  Windows Sidebar and gadgets (overview):http://windows.microsoft.com/en-US/windows-vista/Windows-Sidebar-and-gadgets-overview

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• InDesign Mac CC: "cannot open resource file' popup message when loading a feather in my plugin

  We have a pretty simple plugin for InDesign, which we have maintained since the time Pre-cs.  We would wear to CC.  Everything works on Windows and Mac, with one problem.

  The plug-in displays a file save dialog box, which is customized with a couple of additional controls for additional information from the user on the exported file.  As far as I know, there is no way to do it with the InDesign SDK directly, so we do it with code specific to the platform and resources.  Under Windows, we have this by calling GetSaveFileName in the Windows API and by setting a custom resource .rc and "hook" function with OFN_ENABLETEMPLATE and OFN_ENABLEHOOK.  On Mac, until CC InDesign, we asked the function of carbon NavCreatePutFileDialog, with a style file old Pier and an event proc handling kNavCBCustomize and al.  This has all worked for a long time great.

  However CC InDesign on Mac is 64-bit only, and carbon will not work with it.  So, we took the leap in cocoa and put implement with [NSSavePanel setAccessoryView:], where load us a NSView custom from a pen integrated into our bundle of plug-ins.  And it works very well also.  However, when the plugin code call [NSNib initWithNibNamed:bundle:], InDesign CC appears a warning message saying: "Cannot open resource file."  However, the resource (the pen) is obviously loaded correctly.  Thus, the user must dismiss this apparently false alert box before being able to move forward.  Once the alert is dismissed, the NSSavePanel works very well, with our custom NSView.

  I can say that the popup alert just InDesign itself, rather than a subsystem of Mac underlying as cocoa, because he has the title of "Adobe InDesign" and the gray dark background as the rest of the CC of InDesign and the OK button has an orange highlight around it.  It is clearly not a standard thing of Mac as a NSAlert.  And if I do the same calls to [NSSavePanel setAccessoryView:] et al. in a stand-alone application, obviously no this popup appears.

  It seems that somehow our call to load the file Nib triggers some kind of hook in InDesign.  My guess is that it's a hook for InDesign load its own resources, which is hanging by mistake in features our plug-in.

  I tried two approaches to load the Nib enumerated file here:

  http://StackOverflow.com/a/5855561/3207828

  And they both work, the pen is responsible and we can get our NSView to it and use it in the NSSavePanel.  But if we call [NSNib initWithNibNamed:bundle:], or [NSViewController initWithNibName:bundle:], CC InDesign displays the message box as soon as the call to load the pen is made.

  Why InDesign CC showing the message 'Cannot open resource file', and how can it be prevented?

  Thank you

  Dan

  I thought about it.  The problem was the plugin code to create a ResourceEnabler object, which is needed by older versions (CS *) of the plug-in on Mac to locate resources .rsrc for the call of NavCreatePutFileDialog of carbon with the carbon resource custom.   I #ifdef'd out so that the ResourceEnabler object is not created during the generation of Cocoa 64 bit for the CC and the offending message popup no longer appears.

  I do not understand why the ResourceEnabler object is needed for carbon, resources of the plug-in to the top of the stack of the resource, but I do not completely understand why the presence of the ResourceEnabler object would have an effect on a call from cocoa to [NSNib initWithNibNamed:bundle:], which also works fine.

  Note that simply create the ResourceEnabler object does not trigger the popup even if the bundle of plug-in contains no carbon resources to move to the top of the stack.  It's only when I go to load the Nib file that the ResourceEnabler seems to want to get involved and complain that it cannot find anything.

  So if anyone from Adobe is reading this, I would say that set you the ResourceEnabler feature so that it does not interfere with loading crane of cocoa.  It is perhaps best to just do the ResourceEnabler a no - op in InDesign CC.

• Mac Mini - Finder does not open

  I have a Mac Mini with os x 10.10 2014.  The boot disk was almost full and the finder does not open.  I open the iPhoto and deleted the pictures and then empty the trash in iPhoto.  By logging in as a different user, I see I have ~ 1 GB of space, but when I log on my main account and admin the finder does not always open.

  I read that it was a known issue:

  http://forums.MacRumors.com/threads/Finder-doesn.

  It is said to remove the .plist files, but I can't get to Terminal to do.

  Please advise, thank you!

  Edmund

  If you were able to connect as another user, the issue is not lack of storage - this is the same computer.

  Yes, your .plist file may be corrupt, or you could have an extension conflict that affects only your user account.

  Try the start mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system does a lot of cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• Finder keep it open the file even after I change the default folder

  I have the problem with the default folder in the finder.

  A few months ago, I changed the default folder from the finder to a specific folder. Now, I want to change to the new folder. I already go to finder > Preferences > General > new poster finder window and change the folder, but whenever I click on the finder on the dock for the first time, keep the change back to the old folder. What should I do with this?

  Thank you for the help

  HI there Alia80,

  Looks like you set your Finder preferences to open a specific folder when you open a new window, but it seems to keep coming back to what it was previously set to. I would first start safe mode and if some system-level caches can be erased, and a check disk and repair is done automatically:

  Try safe mode if your Mac does not end commissioning

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Once you log in safe mode, let him by making a normal restart and test the issue again.

  If it persists after this test this point in a new admin on your computerand user let me know what is happening there:

  OS X El Capitan: set up users on your Mac.

  Thank you for using communities of Apple Support.

• Installed XtraFinder and (?) Trash now opens as a tab Finder - how to open Trash in its own window?

  Installed XtraFinder and (?) Trash now opens as a tab Finder - how to open Trash in its own window? With the help of the Mavericks

  Ask the developer of XtraFinder.  It is their product at the origin of the problem, not the Apple software.

• I've created a contact group in Windows Mail, but I can't find where to open it

  original title: Contact groups

  I've created a contact group in Windows Mail, but I can't find where to open it. I started another and told me that the names already exist.

  In Windows Mail, click on Tools > Windows Contacts . Boulder computer Maven
  Most Microsoft Valuable Professional

• Seagate installs but I can not find and cannot open the unit to see my files

  whenever I installed my seagate freeagent go drive.. initio default controller is the one that pops up saying ready for use, but I can not find and cannot open the unit to see my files, I can see it as (which I think it's maybe) in devices, printers as 'Initro Default Controller.

  The disc may need a drive letter must be attributed. Please try the following link to assign a drive letter to the drive.

  http://Windows.Microsoft.com/en-in/Windows7/change-add-or-remove-a-drive-letter

• Sometimes I find my trash open without reason. Why would this happen?

  The day the next day and even when I put my computer to sleep I come back to find the trash open without reason.  I had some personal info compromised (3 times in 3 months).  I was wondering if it was through my computer.

  I am running Windows 7 Professional 64 bit.
  Network firewall: WE
  Windows Update: WE
  Virus protection: WE (avast! Antivirus and Immunet protect)
  Spyware...: WE
  Internet security settings: OK
  UAC: WE
  Network access protection: STOP?
  My trash being open would be a sign of someone access my computer?  Or?
  For any help or suggestion would be appreciated.
  JR

  First of all, I would like to change all passwords on the computer.
  Create strong passwords.
  See: http://www.microsoft.com/security/online-privacy/passwords-create.aspx
  If you use a wireless router, change the password of the router also.
  http://www.Microsoft.com/security/online-privacy/home-wireless.aspx

  Then, make sure that you are up-to-date on of Avast Virus signature files.

  Download location below Microsoft Security Scanner:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Review Microsoft best practices for security
  http://www.Microsoft.com/security/PC-security/default.aspx#safety-products-and-scans

  I hope this helps.

• I installed a game on the App store and now I can't find how to open it to read.

  Original title: App Store

  I am new to Windows 8. I installed a game on the App store and now I can't find how to open it to read. Help is appreciated with kindness. Thank you.

  Hello

  Usually, apps in the Windows store are pinned at the end of the Start Menu.
  You can search the game:
  Windows key + Q (This will open the Find tab in the start menu)
  Type the name of the game in the Search box.
  Pin it to Start is not to lose in the future.

• I just downloaded a new version of Lightroom 6 CD on my mac. Everything went well and he appeared on the screen at the end of the download. I closed everything. When I got home I couldn't find lightroom to open it.  Do I need Mac OS? Or is the

  I just downloaded a new version of Lightroom 6 CD on my mac. Everything went well and he appeared on the screen at the end of the download. I closed everything. When I got home I couldn't find lightroom to open it.  Do I need Mac OS? Or is there something Im missing. David

  Hi Catillack,

  Please click the link below and download the LR application and then use the dmg file downloaded to install LR 6

  Download Photoshop Lightroom

  Once installed if please check and let know us if it exists in your Mac.

  Concerning

  Rohit

• Impossible to deploy Org VDC. Can not find the list of resources

  
  I am trying to deploy a new network of vdc org but get the error "Failed to find a list of resources for the implementation of edge gateway"

  I can see the dvswitch is created in VC Client but then he removes immediately set and gives the error.

  I deleted once today the vcd and started from scratch but still making the same mistakes?

  Someone had this or know where to look?

  See you soon

  Solution has been found.

  I found the problem in the log for debugging on the servers of the cell. You can see try storage and do not.

  For those of you who also see this question, then please check the following recommended by vmware supports known issues.

  Make sure that your storage space has been configured correctly and that you have profiles of storage associated with it.

  You will also need to show your thresholds for storage as it is also a question to know the cause.

  For me, I had to create a new storage cluster and move this cluster of each data store.

  Then refresh the profiles of storage within the VC of VCD element and also to update the connection of VC in VCD.

  Then restart the Service of VC on the VC Server

  Restart the vShield Manager and then wait 5 minutes for the vShield Manager to resynchronize itself and return to normal.

  Now, try again and I hope that you will be successful

• When I try to open LR, I get the following message, the lightroom catalog file named "lightroom catalog 5, cannot open another application already has its opening." I can't find no other open programs and have tried several times to restart and power d

  When I try to open LR, I get the following message, the lightroom catalog file named "lightroom catalog 5, cannot open another application already has its opening." I can find no other open programs and have tried several times to reboot and turn off without success, any thoughts where I should look?

  Cannot open catalog in Lightroom