Output STR - DN1030 HDMI to the TV does not

Similar Questions

• HP Pavilion dv7 Notebook PC: computer laptop HDMI to the TV does not

  I have a monitor of Vizio that I was able to connect to my laptop via a HDMI cable last month.  I did it several times without any problems, but less than a month later I tried to do it again and it does not work.  The monitor says there is no signal, whereas before it was a direct connection.  I don't know what happened.  Help.

  @ALN74,

  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Satellite L650 - HDMI to the TV does not work

  Hey there,

  I have a big prob. My HDMI connector no longer works for about 5 days.

  If I connect my Satellite L650 via HDMI to TV, the laptop detects the TV and identifies it as Phillips, which is quite right, but I don't get a screen on the TV. I have tried several cables and several televisions, tried to activate HDMI thanks to push "FN" + "F5" key, changed the resolution, nothing helps.

  When I connect the HDMI cable to my laptop, I hear that sound when a new device is connected. By pressing fn + f5, I can choose between vga and hdmi connector. My OS is Win7 64.

  Can anyone help? Thank you.

  Hey Buddy,

  Here's a similar thread about the HDMI:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59206

  You can also check out the forum for similar topics, you will find enough and it s the same on each laptop so use the forum search.

  If you have any other questions, you can post again :)

• Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  I'm not an apple person.  I read on a few different forums that apple has changed what is called 'writing' in a recent update to apple.  You may need to find an Apple expert to show you how to make sure you are allowed to write to files or locations on your computer.

• Can Windows Media Player XP play MTS file type? I tried, but the video does not play smoothly. Is this fix really?

  I tried, but the video does not play smoothly.  Is this fix really?

  There is a possibility that Windows Media Player could
  read the file if you rename the MTS to MPG or AVI.

  And/or...the suite of freeware Media Player can be
  worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (The name of the file to download is: "MPC - HomeCinema.1.5.2.3456.x 86 .exe ')

  If this fails, it may be worth trying to convert the MTS file
  WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converters are a few examples:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  You will need to unzip the file... or you could just drag
  the Setup.exe from the file out of the folder and drop it on your
  desktop and install from there.

  Once installed... Open Sothink and go to... Add the files button...
  Find and select the clips you want to convert.

  Next... in the encoding settings... Choose... Video credits.
  WMV - Windows Media Video (*.wmv).

  Choose an output folder and on the left, click on the button convert.

  You can experiment with other settings later but
  This should help you get started.

  (2) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• No sound in 3g 2 files, error "Windows Media Player cannot play the file. The player does not support the format you are trying to play. »

  Original title: cannot get audio from video .3g2 (Windows 7)

  I have a number of videos that were recorded on a Motorola phone to format .3g2, when I played against them in windows XP Pro using what was the most recent media player, they played very well and the audio was present.

  I've since upgraded to Windows 7 Ultimate and have found that videos will play with media player sound is not output.

  I tried different players like VLC (same result, no sound) and came across one called SUPER from erightsoft which indeed works and allows me to re - encode to .wmv BUT when I do and you try to read the .wmv I encounter an error:

  "Windows Media Player cannot play the file. The player does not support the format you are trying to play. »

  When I clikc on help, I am led to a page with links on THIS forum.

  So here I am.

  Can someone explain what is happening, why it happens and how / if I can convert them into a playable (with audio) .wmv friendly format?

  Thank you

  Hi UbinTook,
  
  You found this message from Windows Media Player due to one of the following reasons.
   
  a. you try to play a file that is not supported by the player.
  b. you are trying to play a file that the player does not support, but the file was compressed by using a codec that is not supported by the player.
   
  Step 1:
   
  Confirm that you are trying to play a supported file type. The following article lists the types of files (formats) supported by Windows Media Player.
   
  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992
   
  Note: if you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.
   
  Step 2:
   
  Download the necessary codec to play the file.
   
  For more information of Codec, see: Codec: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions 

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• the keyboard does not have to return the system to the standby mode

  Windows 7 Home Premium 64-bit system.

  The fundamental problem is that, after working properly for more than a year and a half, this Win7 machine suddenly stopped enlightenment of the mode before using the keyboard a few months ago. It still immediately responds to a mouse click, then dysfunction of the keyboard was only a minor inconvenience. The keyboard is equipped with a PS/2 connector, the mouse uses a USB port.

  However, several times lately the keyboard did not return after the awakening of the system; It is a biggest drawback. Each of these three times the keyboard had returned to normal after a reboot of the operating system, using the mouse to manipulate the Start Menu. I noticed nothing otherwise askew with the keyboard at any time, which suggests that this is not a problem with hardware keyboard. I would like to know how to get the system back to normal.

  I don't know if the following is relevant, but it is similar:
  There is a card audio semi professional, with its own control panel software, installed in the computer. With the exception of the occasional limited testing, I do no audio recording here, but I often work on audio recordings downloaded from other sources. Thus, the audio card is really only reading used mode.

  A few months ago a question arose on the settings of the control panel to monitor a recording against existing tracks. Under Win7, the map control panel is configured differently that in previous versions of Windows, if the answer was not immediately obvious.

  I worked on the necessary configuration changes in Control Panel of the card as a test to determine how this follow-up. I may also changed some settings in the console Windows, but I'm not sure. Unfortunately, unlike in versions previous OS, the Windows mixer table affect use of the sound card and it is possible that I got all inputs muted in the Windows mixer as a general precaution.

  Put the system into "sleep" (in the Start Menu) is done several times during my normal day. After running these tests of control, I found that the card does not work after that system was return of the mode 'sleep'. Immediately after the trials I reset control panel of the sound card for my normal use. All seems OK for audio operation was normal except after public awareness of Sleep Mode.

  Audio playback seemed normal in all applications. Programs appear to progress successfully through a recording during playback. Indicators like meters, position of playback cursor and displays the elapsed time has shown its normal operation, but nothing has reached the map output Sockets. I could not find any audio settings that seem to not correct. The Device Manager said that the card was working properly. Restart the normal audio returned BONE, as it does now (most of the time) for the keyboard.

  I played with things for two or three weeks. I've posted questions on some audio related forums, but no suggestion had no effect. Finally, I was ready to uninstall the card its and its drivers, then reinstall, when I remembered on the System Restore Points.

  I found there was a generated system restore point made a few hours before I did my test of the monitor-the-new-record. I used the restore point and the audio card to return to normal, the awakening with the rest of the system.

  The only thing I could say to be uninstalled by the restoration of the system has a few updates of Microsoft Security Essentials. I immediately did a manual update of that, to ensure it would not be any effect on the audio. Audio worked properly since registration, including, but I have not retested monitoring check against existing tracks.

  It was shortly after the keyboard problem has started. In this case I don't know what it is changed on the computer that could have led to the problem, but it seems not unlikely that some settings in the registry system is again wrong.

  Hello

  Thanks for posting your question on the Microsoft Forum.

  Receive you error messages, if so, what is the exact error message?

  What is the number and the model of the keyboard?

  I suggest you to follow the steps below and check if it helps.

  Method 1

  Try to start the troubleshooter from the link below and check if it helps.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2

  I suggest you perform the clean boot.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: Refer to "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after a repair.

   

  Method 3

  For problems with the computer does not wake from sleep, see you at the suggestion of Leo Huang

  http://social.technet.microsoft.com/Forums/windows/en-US/0866de60-a16b-41c4-8a6e-b56c848478f3/new-computer-using-windows-7-will-not-wake-up-from-sleep-mode-i-have-to-manually-turn-it-off-and?forum=w7itprogeneral

   

  Please let us know if the problem persists. We will be happy to help you further.
  Thank you.

   

• CANON PIXMA MG3250 PRINTER - seeing yellow (danger?) in the top left corner and the printer does not print

  Original title: Ms. Sue Somerville

  CANON PIXMA MG3250 PRINTER

  Yellow light (danger?) in the top left corner and the printer does not print. It was OK until I changed the inks.

  I lost instructions and can't download the manual though, like many others I tried for hours!

  I used little of this printer and just need to do simple, but urgent tasks.

  Are we supposed to it's bin and get another, then we can just get instructions and resume our work?

  I don't know about spacing in your message.  Heh

  This is a question for CANON - those who make and take over the device in question.  Everything you describe indicate that this is NOT a computer / software somehow problem and the problem would be the same if the device was not connected to any computer at all, an OS X one or a Linux one...

  These are the Microsoft forums.

  Here is the Canon forums:
  http://community.USA.Canon.com/T5/Canon-Forum/CT-p/Canon_Forum

  Here is a link to the manual for the device:

  http://www.Canon-Europe.com/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mg_series/pixma_mg3250.aspx?type=manuals&language=en#Disclaimer

  I suggest out of ink, check you removed all the "stickers" on the ink that * need * to be removed to work properly and make sure that the ink properly.  Print the pattern check nozzles and then to make sure that everything is installed properly:

  1. Make sure that the power is turned on.

  1. Load a sheet of A4 or letter paper format in the front tray.

  1. Open the output tray extension, open the paper output tray, and then extend the output paper support.

  1. Print the nozzle check pattern.

  (1) press on the button in Maintenance for poster has.

  

  (2) press the color or black.

  The ground of review of the nozzle will print.

  1. Review the rationale for control of the nozzle.

• Problems with my sound doesn't play not even though the settings say that the audio does not work properly

  recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work.  I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found.  So I restored by computer back to before I left on vacation, but still no sound.  No pop up with the dll is not found though.  I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance.  said the task of event 20 116.  I have an ACER one with windows. the computer has HDMI dolby and realtek.

  -

  -

   

    20

    0

    4

    116

    0

    0 x 800000000000000

   

    3490

   

   

    Microsoft-Windows-Audio/PlaybackManager

    LorrainesPC

   

   

  -

    3

    48000

    fake

   

   

  Judy Hello,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 2

  Method 2:

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Either the file does not exist, you are not allowed, or is the file may be in use.

  I'll do that as a separate issue because I think that, ultimately, it is this error that is causing me so many problems in InDesign.

  Scenario...

  New Document > drag a CC library item into the document > save the document and close InDesign > open the document, the error message...

  "This document contains < number > links to sources that are missing.  You can find or reedit the missing links using the links Panel. »

  When you attempt to link the missing links again...

  "The file does not exist, you are not allowed, or is the file may be in use."

  When you remove the link to the document and try to reinsert it draws CC...

  "The file does not exist, you are not allowed, or is the file may be in use."

  All this becomes a major problem when trying to output the document in PDF format, which is asking our printer.  The binding elements are given white background and they are of poor quality, too.

  Is this a known bug?  I see a lot of messages about it, which goes back to 2012!, but no solutions to this day.

  I hope someone can help.  Thank you.

  NJ

  > I'll try things that you suggest, but what is most concerning is that this library works with new documents - library items don't report any error.  So why he pointed out problems in a single document display paths and which are all correct?

  The problem could be in the InDesign document, in that you move the data from the library?

  Try saving this file as a file IDML (to clean possible corruption), and then reopen it in a new document and try again.

• top of the margin does not

  Is someone can you please tell me why the top of the margin does not work for the paragraph starting with Discover more...

  http://www.snowflakesandblossoms.ca/Collections.php

  Thanks in advance!  Probably something stupid, but I perhaps am overthinking and missing clearly!

  Donna

  dmreid wrote:

  Thanks Ken!  I did, but I was curious as to why it did not work when I apply that. Collections-hand or. Collections-hand p?  It should be, shouldn't it?

  Thank you

  Donna

  His does not work because you have not disabled the floats in the container "tabs".

  First of all, do not float the 'tabs '.

  left. You can comment this output and add overflow: hidden; to clear the floats:

  {#tabs}

  / * float: left; * /

  Width: 100%;

  font-size: 1.00em;

  make-weight: bold;

  background-color: #0 has 3371;

  text-align: center;

  overflow: hidden;

  }

  Not necessary to float the "ul tabs' on the left, comment him:

  #tabs ul {}

  / * float: left; */

  Width: 100%;

  margin: 0;

  list-style: none;

  background-color: #0 has 3371;

  text-align: center;

  }

  Remove the margin-top: 15px; -

  . Collections-hand p {}

  top of the margin: 15px;

  text-align: center;

  do-family: "Lucida Sans Unicode", "Lucida Grande", without serif.

  Police-weight: 600;

  make-style: italic;

  color: #710 has 33;

  It looks like you use the second level menus is allowed to use overflow: hidden; the CSS "tabs".

  IF you intend to use the second level menus, then you will need to clear floats using an inline style:

  • Who are we
  • Accessories
  • Collections
  • New arrivals
  • Special offers
  • Contact us
  • Home

  
  

• Alienware M17xR4 speakers and the headphones does not

  Hello

  Once I plugged headphones Apple (like those that come with iPhones) on the plug headset no longer works. Even after that I reconnected the headphones into the Jack, the headphones or the speakers do not work. I tried different headphones as well, but they don't always work.

  When I went in the sound control panel (windows 7) I see the "speakers" and "digital output" of Sound Blaster Recon3di. When I try to play some sounds he plays through the 'digital output' and not the speakers. I also tried to disable the 'digital output' but it does not always play through the speakers, and only through the "digital output". The speakers are set to the default device.

  Help, please

  I am the owner of this laptop (M17x R4) and learned that there was some defect fundamental with the motherboard drivers and bios / Setup.

  I had my motherboard and charge cable and speakers replaced several times now with Dell and the problem comes back.

  Either the sound does not work (speakers / headphones etc.) or the cable from the charger (AC adapter) is not recognized as a valid cable and thus is will not charge the laptop.

  I wanted to share something that works 100% of the time for me now to solve this problem. Unfortunately, I consider that this defective equipment by Dell, but they do not recognize this.

  Keep the drivers card mother Bios A12 handy that Dell has for download on this model. At any time, this problem occurs, reinstall the drivers from the A12. When the computer reboots, the problem disappeared... at least for a while.  Give it a few days or a few weeks, but he'll be back.  When this is the case, re - install the A12 drivers... problems go back... temporarily.

  Something is corrupting the drivers or the MOBO config or something...

  Just re-installed A12 because there on the 15th time and boop, my speakers again, works as expected. This laptop price shouldn't have these horrible problems.

  I really hope that Dell realizes that inaction in the face of this root cause of the problem, will result in the loss of brand loyalty to their customers.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• iPhone 5: objective of the camera does not work after update iOS 10

  Hello everyone.

  I swear to you that I have no idea how do... after a few weeks since the release of iOS 10, yesterday I force myself to be updated - the situation with iOS 9.3.2 became crash and unbearable lag every second. The fact is that I update, I like the system and use it for a few hours. Check the camera this morning, I see that the focus does not work. Now I also see AE / AF Lock, light changes whenever I tap on one side or the other, but not to focus. Not even close or far, nothing to do. I have not tried in the settings to do a full erase, I had no way to restore it since I do not have a backup.

  I tried to clean the lens - already cleaned, I tried to give him a few small nicks and follow the many guides online. I rebooted and everything done. Nothing has changed.

  The last photo was taken last night and has been developed. So I don't think it's a hardware problem and if so, how has it happened? A few hours ago the iPhone is fallen, but tell me if it makes sense. If it's a software problem, what could I do?

  I would avoid the assistance. It is a used iPhone, never jailbroken. I don't have a lot of confidence with the help, in 6 or 7 years he never went - iPhone always bought used and always worked very well.

  PS: I have no way to get into DFU, as iTunes does not see my iPhone. Up to iOS 9 that I had no problem even if I had enough of the device with the cable isn't original, but barely now lets load ("This accessory may not work").

  Hello

  I also have an iPhone 5 and I tested the question and mine is fine, how bad was the fall that you mentioned? Sometimes problems can come and go. Also try to reformulate your device.

  After this answer please.

  Thank you Will