oval shaped the rollover area

Similar Questions

• Reshape the rollover area

  I have a pie chart I would like to provide additional information using the animated buttons. I thought I'd be able to do this using a smart polygon shape for each part of my pie chart and then use convert to a smart form reversal. However, that appears to convert the smart form into a text box and keeps the rectangular button that is animated. This seems rather backwards. Someone at - he a clue as how to shape the rollover instead of the text box area? Thank you.

  Darin

  Indeed, it is the smart form which is transformed into a form of substitution as the Tip mentioned, but the rollover area is always a rectangle.

  Should it be a bearing, a click is not an alternative? If you can deal with the clicks: create a form with the desired shape and turn it into a button.

  If you really need rollover, then you should buy the Eventhandler's InfoSemantics widget, it allows you to create rollover events.

  Another solution is to use a slidelet. For slidelets, it is possible to 'Redraw' the rollover area.

  Lilybiri

• Rollover area appeared on all slides

  If you change a Captivate 5.5 project I realized that at some point, I did something to enlarge a rollover on all slides area. When editing, I saved the file under a new name where I needed to go back to the original. When I check the file plus the rollover area is not there. I checked the master slide, and it is not a bearing on it. I can't click on it to remove it. I'd appreciate any help to do this, go away. Thank you.

  Your screenshot of the first slide shows not all objects.  See the scroll bar on the right side?  Are there flipping objects more near the top of the timeline?  There may be a hidden up there which lasted for the rest of the project.

  It is easy to miss one of these objects if it is layer has been disabled via the small 'eye' icon at the left end of the diaper.  If you think you've found the slide where this persistend object, try to hide this entire slide and do a test post to see if the object of reversal and then disappears.  If so and you can't find the object on this slide anywhere, it might indeed be corrupted.  In this case, delete and re-create the slide from scratch.  The last thing that needs any developer of corrupt Captivate Slides.

• Captivate 5 STROKE hide State of the rollover slidelet

  I'm trying to figure out how to hide the shot on the slidelet box - not the content box put you things. I see in the properties, there is a way to hide the stroke - which works, but when I saw my Captivate 5 file and move my mouse over the area of the slidelet, stroke boxes shows up! Very frustrating! I don't want a line on this box to any point in time. Is there a way to disable it is as well that the race does not appear on the bearing?

  Thanks in advance!

  Hello

  Click on the rollover area and look in the properties panel. Specifically, the section titled Transition (to 5.0). There is an option called 'Border of the Runtime Show' you should probably disable by unchecking the checkbox. 5.5 he called to "Show Runtime shadow" and is located in the section fill and stroke.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Can I add an image to a rollover area?

  Hello
  Can I add an image to a rollover area? For example a 'mouse hover here prompt? "
  
  Additionally, my rollover area and the rollover image keep block so if I move one another to move. Anyone know why, or how to remedy?
  Thank you
  Peter

  Hi Peter

  While you may not use an image as part of the bearing, there should be nothing stopping you from simply insert an additional image to use for this.

  In regard to the two regions being selected and moving when you want only one, I would ask if the image is large enough that it covers part of the rollover area? If so, who could explain it. The regions should be able to be controlled independently. But sometimes, he must first reduce the size of the rollover image to make room for the rollover area, if you want to focus on that. Once done, you should be able to restore the size of the image and reposition if necessary.

  See you soon... Rick

• Reinstalled Windows Vista, and now the graphics are distorted.

  After installing windows Vista, I noticed that the graphics are not good. Looks like it's tense from left to right. Round circles are shaped eggs. I tried all the different settings and the same results. I get this message and I wonder if it is related. It is said CCA proxy.exe totle bar and then says unable to connect or locate ConnAPI.DLL.says to try to reinstall. I did saw that I don't know what it takes to reinstall or where?

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  If the above does not solve it:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Fade does not not on the rollover for Captivate 6 Image

  Hello

  I am totally baffled by this question.  When I use bland in 0.5 sec and Fade Out 0.5 seconds on a rollover image, it will not work.  I even changed the default on my preferences for flight path images, and again, it will not work and does not show in my Accordion Panel in properties.

  If I use Captivate 5, I have no problem.  Any suggestions?

  Thank you

  Jeff

  You forget that a rollover object has two parts?  It has an area and the object that appears when you hover over the affected area. Each part can have different settings in the Properties tab. In a legend of working capital, the object that appears is a text caption.  In a rollover image, the object is a picture.

  If you select the reversal on the timeline object, the properties you see this in the Properties tab are for the affected area.  So have melted in or fade out defined it will not affect the object that appears on mouseover.

  If you select the caption or image on the scene in edit mode, the properties shown in the Properties tab for that specific object and may be different from the affected area of the object even reversal.

  In your case, make sure that your image is set on have melted or molten.  Discoloration on one area of an object of substitution is not really helpful at all.

• Possibility to change the rollover button via events State?

  I have a small AIR application, I wrote that basically allows instructors open vehicle different sovereign control panel, set the positions of the controls on the Panel and then take screenshots for their educational materials. Since some of the panels receive enough complex, I thought it would be nice to have a function such that they could see where all of the invisible buttons are for all controls on a Panel.

  My first thought was to just put all the buttons to their rollover State, but that went nowhere part quickly (they aren't MovieClips, they are SimpleButtons), so my next thought was to send somehow a turning event to each button to force it to the rollover State. But I can't seem to get anywhere with anyone...

  If I do:

       btnDn.dispatchEvent( new Event(MouseEvent.MOUSE_OVER) );
  

  nothing notable happens.

  Does anyone have pointers on this? I'm looking for something stupid and impossible?

  I have a DIY class where I simply swap the upState and exaggerate buttons, but it feels ridiculous overkill for something that seems like it should be so simple...

  Thanks in advance,

  Eric.

  a temporary variable is necessary.  If you want to optimize this code so there's minimal work for the flash player, use:

  var tempState:DisplayObject;

  function swapUpOverF(btn:SimpleButton):void {}

  tempState = btn.upState;

  btn.upState = btn.overState;

  btn.overState = tempState;

  }

• Rollover buttons and rollover areas

  I created a button on the Fireworks that turns from blue to purple on rolling and when I imported it in Captivate 5 it works perfectly. However when I added a rollover of the change button area is more color. I'd like some ideas on how to make this work.

  I tried to place the rollover behind the button area and it changes color, but the legend of turnover does not appear. I also tried not using a rollover area and rather by changing the properties of button on success: Show > text of the legend and that works ok except that I don't want the slides to continue because there is still other buttons I want the Viewer to the press before continuing. I feel there are a few advanced Actions that I could use but do not know how to configure them.

  Please help me, thanks a package in advance.

  Kat

  You can get this to work by using the event handler widget: http://www.infosemantics.com.au/catalog/widgets/interactive/wdgt_event_handler_01

  There is a post here where I describe how we widgets event handler for have a bearing, but also a double click event made a click event right all work outside the same object on a Captivate slide: http://www.infosemantics.com.au/beat_cp_interactive_catch22

  It is not possible to do otherwise.  I tried all the other ways I could think of first.

• After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  Possible explanation.  It is likely that batteries, so fresh, can be irregular in size.   The uncertain connection would therefore tend to lead to a failure to blink and you declare.   Read my thing...

  Batteries.

• all the songs are accidentally left organized files

  Hi all

  I moved accidentally all my songs out their records organized iTunes.

  The songs are all still in the music folder, but are now loose in there, and all of their files are empty.

  I find that all my songs are still playing very well, but just do not know if maybe I should get iTunes somehow to put them all back (?)

  Since then, I rebooted my Mac and reinstalled an .itl for her, so not looking is not a cancellation, but rather an organizing method that would not risk ruining his perfect current functionality.

  Any ideas on that?

  Thank you!

  I think probably the best thing to do would have to drag the iTunes folder automatically added to.

  iTunes 9: understanding the "Automatically add to iTunes" folder - http://support.apple.com/kb/HT3832 - files placed in this folder are actually moved from this folder to the correct location in the iTunes Media folder.

  Items already in the list of iTunes library do not appear a second time.

• I have someone just showed about 100 pictures of my iPad. Now, the pictures are missing, and the "recently deleted" folder is also empty. What can I do?

  I have someone just showed about 100 pictures of my iPad. Now, the pictures are missing, and the "recently deleted" folder is also empty. What can I do?

  Have you done something after their show.

• I've updated to Sierra, na not use iCloud, now I see all of my dates in the calendar are gone!

  I've updated to Sierra, na not use iCloud, now I see all of my dates in the calendar are gone!

  If it was in iCloud, turn, if they were not, tell us where they have been

• The AirPod are compatible only with iphone 7? Or we can use it with more than 6 s... or any android device?

  The AirPod are compatible only with iphone 7? Or we can use it with more than 6 s... or any android device?

  Here are the tech specs: http://www.apple.com/shop/product/MMEF2AM/A/airpods

  They are bluetooth devices, so they work with the iPhone 5 or more.

  See you soon,.

  GB

• The icons are too big

  The icons are too big for the screen. I'm unable to reduce them. Can you help me?

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  Try to assign layout.css.devPixelsPerPx 1.0 (default is - 1) on the topic: config page.
  If necessary adjust the value by 0.1 or 0.05 (1.1 or 0.9) until icons or text looks right.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  You can watch the Default FullZoom Level or NoSquint extension to define a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/