OVD Custom Plugin - return invalid authentication to the Proxy Service

Similar Questions

• Add Basic authentication to the Proxy Services in OSB

  Hello
  
  I just need to add basic (browser pop-up with usr and pwd) authentication to a proxy service.
  
  How can I do?
  
  Thank you!!

  For an HTTP service choose the HTTP Transport label, and then select Basic for the authentication property.

• Authentication Failed: the Proxy to fail

  What's the matter, authentication fails and the message is this:

  Authentication Failed: the Proxy to fail

  Thank you

  Go to network settings > under 'Groups of network devices' click "(non attribué)" "

  Under servers "(Not Assigned) AAA", note the name of the IP address of your machine, which can be confirmed from the DOS command prompt "

  using the command "ipconfig/all".

  Then, return to the Network Configuration > under "Distribution of Proxy table", click on "(default)".

  And make sure you name server entry AAA for your machine is in the column 'Forward To '. If it isn't, then move your entry of the column machines and ensure that all other entry is under "AAA servers. Press 'submit + Restart.

  Finally, try authenticate a client bit against this ACS server.

  Kind regards

  Prem

• Error while trying to generate the Proxy Services on OSB

  Hello

  I am developing some services on OSB, every service call stored procedures using a database of JCA adapter.

  I followed this tutorial:

  https://guidoschmutz.WordPress.com/2010/08/08/Oracle-service-bus-11g-and-DB-adapter-a-different-more-integrated-approach/

  Business service are ok, they work fine, I tested it directly from OSB.

  Problems when trying to generate the proxy service.

  The General configuration of the proxy after set the source of the wsdl and when I specify jca file proxy service, an error message returned:

  "Unable to update JCA transport invalid JCA proxy service. Transport exception occurred with the following message:
Invalid JCA file for JCA proxy service. If you are creating a Proxy from a Business Service, please select a different transport type (for example, http). If not, JCA file must contain JCA activation spec properties."

  And here's my content created by JDeveloper jca file:

  
  

  < name of the adapter-config = "getApprover" = 'Database adapter' adapter wsdlLocation = "getApprover.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = ' ist/DB/adapter' UIConnectionName = "Adapter" adapterRef = "" / >

  < endpoint-interaction portType = operation "getApprover_ptt" = "getApprover" >

  < className = "oracle.tip.adapter.db.DBStoredProcedureInteractionSpec interaction-spec" >

  < property name = "SchemaName" value = "APPS" / >

  < property name = "PackageName" value = "ERS_SKS_TASK_UTILITIES_NEW_PKG" / >

  < property name = "Procedurename" value = "GET_APPROVER" / >

  < property name = "GetActiveUnitOfWork" value = "false" / >

  < / interaction-spec >

  < output / >

  < / interaction of endpoint >

  < / adapter-config >

  
  

  Is there someone who had attempted to use the JCA transport with database adapter already? Please give me a suggestion.

  
  

  Thank you.

  Fairlie
  

  Hello

  In transport, changes in the Protocol on the proxy for local or http service.

• Creating the proxy service

  When I create the proxy service and choose to be created from the WSDL, I have two options for selection of the port and binding, could explain the difference in choosing between the port or binding?

  Thank you!

  This might help... Configuration of the Proxy Services and Business Services

• access to the original inside the proxy service message

  I have the proxy (serviceType = Web Service, WSDL) service that is available to the client endpoint and I want to record the incoming message to the file on the disk. However, I want to persist any incoming message exectly (at the byte level) as it was sent by the sender (so with the envelope).
  Inside of the proxy service I have access to variables such as header, body etc. However, they are not good for my purpose because they differ from the corresponding parts of the original message. For example xmlns:soapenv = namespace "http://schemas.xmlsoap.org/soap/envelope/" in the original message
  defined only at the level of the envelope and not the header or body. But in the header and body available inside the proxy service variables they (namespaces) are visible. Mayby there are more differences, but this one is visible at a time.
  It is therefore possible to access (in order to save it) original message somehow? Any magical variable? Or mayby there is a way of saying the osb to be persisted (incoming query) in file? (it would be enough for me (of course I need file name).) I manage file by myself more far away).
  All advice appreciated

  If you choose the type of service that WSDL based or service of any SOAP, then OSB motor deconstruct the incoming SOAP envelope and complete parts of the envelope (header, body etc) to automatically correct context variables. This occurs before the flow of messages of proxy service is initiated, so you can't do anything. In the proxy service, you will receive the deconstructed only SOAP message.
  If you wish to record the exact message that has been received by the OSB, then change the type of service to (or create another proxy service in front of the existing proxy) type Messaging with text or binary content. Or you can also choose AnyXML service type, in which case the incoming SOAP envelope will be available inside variable $body in mail flow.

• How to change the soap to the proxy service request?

  Here is an example SOAP:
  

  <soapenv:Header>
      <Security xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
      <UsernameToken>
      <Username>kvd</Username>
      <Password>testpwd</Password>
      </UsernameToken>
     </Security>
    </soapenv:Header>
  
     <soapenv:Body>
        <per:getApplicationInfo>
           <userName>test</userName>
           <applCode>358</applCode>
        </per:getApplicationInfo>
     </soapenv:Body>

  I need to replace the value of the app with user name in the proxy service. Could someone help me what is the XPath expression for the username and app?
  
  The company should get the underside of SOAP.
  

   <soapenv:Header>
      <Security xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
      <UsernameToken>
      <Username>kvd</Username>
      <Password>testpwd</Password>
      </UsernameToken>
     </Security>
    </soapenv:Header>
  
     <soapenv:Body>
        <per:getApplicationInfo>
           <userName>kvd</userName>
           <applCode>358</applCode>
        </per:getApplicationInfo>
     </soapenv:Body>

  This is the approach that I think: 1) alter the flow of messages Proxy Service-> add a pair of Pipeline-> replace app with username-> call Business Service.
  
  I use Oracle Service Bus 10 g.
  
  Published by: user12876168 on April 25, 2011 05:50

  You were missing the namespaces in xpath associated header.

  In your request, soap, security namespaces, UsernameToken, etc... are related to the target namespace. Below is the reason why:
  xmlns = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" >

  So that means all the xml tags that don't have not one namespace linked to it belongs to the targetNamespace and where they must be accessible with it.

  So set a namespace as WSSE as http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd and then use the underside of xpath.

  * $header / wsse:Security/wsse:UsernameToken/wsse:Username/text() *.

  It should work.

  Thank you
  Patrick

• What type of service you want to use for the Proxy Service

  I have a question about a service Proxy.
  
  I need a local (local transport) the Proxy service which is called by another proxy service.
  It is a synchronous service that has an incoming message XML and an outgoing XML message.
  
  I have the following questions:
  -Does make a difference in performance when I choose a webservice WSDL or a courier service?
  -Which would you choose and why?
  
  Thanx

  Does make a difference in performance when I choose a webservice WSDL or a courier service?

  There would be little difference.

  Which would you choose and why?

  I would choose XML type type e-mail proxy because the input and output XML messages. I choose WSDL web service because it should be used in the case of SOAP packagaing only (in the context of web service, to enable SOAP and WS support) to make fun of a web service that has a WSDL (and an XSD) that is associated with.

  Kind regards
  Anuj

• OSB - Manager of errors in binding to the proxy service

  Hello!
  
  I had a proxy service that queries a POP3 server to download emails and process them.
  My question: How can I bind an error handler to the proxy service to notice when the POP3 server is not available?
  So, I would put an alert when the OSB loses the connection to the mail server. I tried to put an error handler to the top component of the mail flow page, but it does not work...
  Could someone help me?
  Thank you!
  
  Viktor

  For the transport of poller (e-mail/FTP/File, etc.), it is not possible to intercept the transport layer errors, in your service error handler. Re: OSB - Manager of errors in FTP to TransportException transport

  Thank you
  Maury

  Published by: Manoj Neelapu on June 28, 2010 15:51

• Upload file in the Proxy Service ALSB

  Hello
  
  I need to download a file from one system to another system by the Proxy Service.
  
  With the Proxy Service, you can download a file by using the FTP protocol. But, how a upload a file?
  
  Thank you and best regards,
  Charrier

  Hello..

  You can use a business type Messaging service.

• Failed to create the Proxy service with transport JCA

  Hello everyone.
  I have some questions when trying to create the ftp with jca transport service. I followed the instructions in this tutorial:
  http://blogs.Oracle.com/MarkSmith/entry/osb_and_ftp_adapter_in_11g
  
  I stuck at step 4, cannot create proxy service to use JCA file I created by JDeveloper 11 g (11.1.1.5). When I specify the file of jca proxy service, an error message returned:

  <ALSB Console> <BEA-494002> <Internal error occured in OSBConsole : Transport exception occurred with the following message:
  Invalid JCA file for JCA proxy service. If you are creating a Proxy from a Business Service, please select a different transport type (for example, http). If not, JCA file must contain JCA activation spec properties.

  And here's my content created by JDeveloper jca file:
  

  <adapter-config name="myJCA_FTP_service" adapter="FTP Adapter" wsdlLocation="myJCA_FTP_service.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    
    <connection-factory location="eis/ftp/MyFtpAdapter"/>
    <endpoint-interaction portType="Put_ptt" operation="Put">
      <interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPInteractionSpec">
        <property name="PhysicalDirectory" value="/home/FTP-shared/upload"/>
        <property name="FileType" value="ascii"/>
        <property name="Append" value="false"/>
        <property name="FileNamingConvention" value="osb_%SEQ%"/>
        <property name="NumberMessages" value="1"/>
      </interaction-spec>
    </endpoint-interaction>
  
  </adapter-config>

  Is there someone who had attempted to use JCA adapter Ftp transport already? Please give me a suggestion.
  Any response is appreciated
  
  Best regards, Cuong Pham

  If you have selected the operation PUT you can only generate a business of the JCA service.

• OSB - access to the operational parameters within the Proxy Service

  Anyone know if it is possible to access the parameters of functioning within a Proxy Service?
  
  Use instead of logging case, we realize audit by inserting into a database. In some circles, we want to turn this option off. I would like to reuse the fair to decide or not to audit logging logs.
  
  If the flow of messages would have if (auditLevel = "Warning") then BusinessService legend for the audit.
  
  Doing it this way allows operations choose whether or not an audit, rather than make changes to the code in different environments to choose or not to audit.

  A few months back I was also working on a similar requirement where the customer would not have to go to the configuration for OSB change (and even update) to change the log level or beginning of audit. After searching for a bit, we have implemented the legend of java to read a property file and provide the value of the flag during the conduct of the audit. We have also created a java utility that allows to clear the cache of the server (because the server load & updates cache the file after each reboot). So whenever we need to make a change in the check indicator, we just change the value in the properties file and clear the cache of the server. This makes the new copy of the file of properties available in the cache server and java OSB legend takes up the same.

  It was quite complex, but the only one best solution we could find. Please let us know if you get something better.

  Kind regards
  Anuj

• How the proxy service can get the client certificate in Oracle Service Bus

  Hello everyone, now I'm confused in how can get service proxy client certificate in Oracle Service Bus. I have configured bidirectional SSL in Weblogic, the client sends its cerficate to Weblogic and Weblogic checks this cerficate if have access permissions Weblogic, but my proxy service cannot obtain this certificate to do more work, who can help me?
  And my proxy service service type is the messaging service.
  
  Thank you!!!
  Sea

  Hi, if you have configured for client certificate authentication, weblogic maps an attribute in the DN of the client certificate to a user of weblogic security realm. The attribute is controlled by the default configuration to map the user in the default identity asserter in the WLS Console--> security--> kingdoms--> suppliers--> default identity Asserter. Generally, the CN attribute is selected for this purpose. You must also create a user in the security field, with the value of this attribute in the client certificate for authentication to succeed. Once the authentication is successful, the user is used as the authenticated user. So if you want to set permissions for authorization on the proxy, you can do it based on this user. For this you need not the certificate of the client. In the pipeline of message, I guess you can get the authenticated user of $inbound, which in turn corresponds to an attribute in the DN of the client certificate.

• Subselect query returns "invalid identifier", but the nested query return lines

  I don't think it's a general SQL question.

  Select * from persons where person_id in)

  Select person_id with people whose name = 'Obama' - subquery

  ) and age > 18;

  When I run the subquery, I get:

  ORA-00904: "PERSON_ID": invalid identifier

  00904, 00000 - '% s: invalid identifier '.

  * Cause:

  * Action:

  Error on line: column 5: 8

  This is because the table people do not have the person_id field.

  But when I run the nested together query it returns all the lines in people with the AGE greater than 18.

  How is he succeeds when the subquery is obviously wrong?

  363f652b-263D-4418-933F-74a1d0a41b4c wrote:

  I don't think it's a general SQL question.

  Select * from persons where person_id in)

  Select person_id with people whose name = 'Obama' - subquery

  ) and age > 18;

  When I run the subquery, I get:

  ORA-00904: "PERSON_ID": invalid identifier

  00904, 00000 - '% s: invalid identifier '.

  * Cause:

  * Action:

  Error on line: column 5: 8

  This is because the table people do not have the person_id field.

  But when I run the nested together query it returns all the lines in people with the AGE greater than 18.

  How is he succeeds when the subquery is obviously wrong?

  Yes - this is a general SQL question and ask often enough.

  Correlated subqueries depend on the inner query, be able to see and access to the columns of the outer query. Normally see you referenced in the WHERE clause of the subquery and not in the SELECT clause, but the reference is valid in both places. This works because the columns of the tables in the main query are accessible in the subquery. "Person_id" is probably a column in the table 'people '.

  Which can be a cause of problems 'odd' when the column (in your case "person_id") is more of a table.

  Use an alias in the subquery in the subquery and you will find that it will not succeed.

  See these two articles AskTom where he addresses this specific issue

  http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:3317493900346468494

  http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:155200640564

• Calc. custom to return a percentage of the number of times 'Yes' is returned in other areas.

  Hello

  I have a number of areas that require a Yes, no, n/a answer in a drop down. Then I need to auto calculate the number of times 'Yes' is selected, divided by the number of Yes and No of (but excludes the addition of the na in the denominator). Numerator = Countif("yes")/denominator = Countif ("Yes" or "no").

  Thank you

  OK, then you can use this code as the calculation script custom of the field where you want the result to appear (PC MCKTOTAL):

  var totalYes = 0;
  var total = 0;
  for (var i=1; i<=5; i++) {
      var f = this.getField("PC MCKRow"+i);
      if (f.valueAsString=="Yes") {
          totalYes++;
          total++;
      } else if (f.valueAsString=="No") {
          total++;
      }
  }
  if (total==0) event.value = "";
  else event.value = totalYes / total;