Override AutoDim option
Hi all!
I did some research, trying to understand to substitute the AutoDim screen option. It seems, however, there is no way to do it.
Does anyone know different, if there is a way to replace the AutoDim option while the application is running (backlight is on)?
Thank you for your reply,
H.
net.rim.device.api.system.Backlight allows you to set the timeout of the screen, but there is no options to control the auto dim function
Tags: BlackBerry Developers
Similar Questions
-
When you use vsync, my framerate is locked at 55fps/hz instead of 60
Although that applying Vsync on girls games, which either through D3D Overrider or options in the game, and double buffering or triple stamped my framerate is locked at 55.4 instead of 60.
I have Win 7 Home Premium x 64 and before that Vista Ultimate x 64 and not had this problem on Vista. I tested on my monitor (Dell 2208WFP) and my plasma Pioneer 4280 and happens in both.
My card is a Sapphire Radeon 4850HD (on the Catalyst 9.10 drivers) and on the CCC registers the 60 Hz refresh rate. So I don't have a clue what is happening.
PS Also have this strange stuttering on grid (steam version) where the game freezes just sort of during a second, this is not also happened on Vista.
Data sheet:
-Phenom ii X 4 * address email is removed from the privacy *.
4850HD - Radeon (stock)
-4 GB of DDR3 1333 Mhz
-MSI 770 - C45 moboI highly recommend that you do not Vsync. It tends to lower the display rate. With the video card you have (I have it too), you should be able to run games without Vsync or buffering options enabled. VSYNC is used to correct the games graphics problems that some games can have. If you have any problems during the execution no Vsync then you shouldn't use it at all. I have a simple philosophy: just assume everyone is a piece of c.r.a.p. and then be pleasantly surprised if you find someone who is not.
-
I was working on the creation of a PIX 515e to serve my firewall and VPN. The firewall and main routing work well as I am able to VPN and get an IP address. However, I am unable to remote desktop on a PC behind the firewall.
Here is my config as I have now. If someone could show me what I'm missing, would be great.
Firewall # sh run
: Saved
:
PIX Version 7.2 (3)
!
Firewall host name
DOMAINNAME.COM domain name
activate r9tt5TvvX00Om3tg encrypted password
names of
!
interface Ethernet0
PPPoE Interface Description
nameif outside
security-level 0
PPPoE client vpdn group pppoe
63.115.220.5 255.255.255.255 IP address pppoe setroute
!
interface Ethernet1
Description network internal
nameif inside
security-level 100
the IP 192.168.0.1 255.255.255.0
!
interface Ethernet2
DMZ Interface Description
nameif DMZ
security-level 50
IP 10.1.48.1 255.255.252.0
!
2KFQnbNIdI.2KYOU encrypted passwd
passive FTP mode
clock timezone STD - 7
clock to summer time recurring MDT
DNS server-group DefaultDNS
domain ivanwindon.ghpstudios.com
object-group service remote tcp - udp
Description Office remotely
3389 3389 port-object range
standard access list vpn_client_splitTunnelAcl allow a
inside_nat0_outbound list of allowed ip extended access any 192.168.0.192 255.255.255.192
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.0.96 255.255.255.240
access-list Local_LAN_Access Note Local LAN access
Local_LAN_Access list standard access allowed host 0.0.0.0
outside_cryptomap_65535.20 deny ip extended access list a whole
access-list 102 extended allow ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0
vpn_client_splitTunnelAcl_1 list standard access allowed 192.168.0.0 255.255.255.0
inside_access_in list extended access permit tcp any eq 3389 3389 any eq
pager lines 24
Enable logging
information recording console
registration of information monitor
logging trap information
asdm of logging of information
address record [email protected] / * /
exploitation forest-address recipient [email protected] / * / level of errors
Outside 1500 MTU
Within 1500 MTU
MTU 1500 DMZ
IP local pool vpn_pool 192.168.0.100 - 192.168.0.105 mask 255.255.255.0
IP verify reverse path to the outside interface
ICMP unreachable rate-limit 1 burst-size 1
ASDM image Flash: / asdm - 523.bin
enable ASDM history
ARP timeout 14400
Overall 101 (external) interface
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 101 0.0.0.0 0.0.0.0
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 207.225.112.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
AAA authentication LOCAL telnet console
Enable http server
http 192.168.0.4 255.255.255.255 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto-map dynamic outside_dyn_map 20 set pfs
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
Crypto-map dynamic outside_dyn_map 20 the value reverse-road
PFS set 40 crypto dynamic-map outside_dyn_map
Crypto-map dynamic outside_dyn_map 40 value transform-set ESP-3DES-SHA
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP disconnect - notify
Telnet 192.168.0.4 255.255.255.255 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
VPDN group request dialout pppoe pppoe
VPDN group pppoe localname [email protected] / * /
VPDN group pppoe ppp authentication chap
VPDN username username password *.
dhcpd dns 208.67.222.222 208.67.220.220
dhcpd lease 1500
dhcpd ping_timeout 10
NAME of domain domain dhcpd
dhcpd auto_config off vpnclient-wins-override
dhcpd option 3 ip 192.168.0.1
!
dhcpd address 192.168.0.5 - 192.168.0.49 inside
dhcpd dns 208.67.222.222 208.67.220.220 interface inside
dhcpd lease interface 1500 inside
interface ping_timeout 10 dhcpd inside
dhcpd DOMAIN domain name inside interface
dhcpd 192.168.0.1 ip interface option 3 inside
dhcpd allow inside
!
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
TFTP server inside 192.168.0.4/TFTP-Root
internal vpn_client group policy
attributes of the strategy of group vpn_client
value of server DNS 208.67.222.222 208.67.220.220
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpn_client_splitTunnelAcl_1
value by default-domain DomainName
admin I727P4FvcUV4IZGC encrypted privilege 15 password username
username ivanwindon encrypted password privilege 0 7K5PuGcBwHggqgCD
username ivanwindon attributes
VPN-group-policy vpn_client
tunnel-group vpn_client type ipsec-ra
tunnel-group vpn_client General-attributes
address vpn_pool pool
Group Policy - by default-vpn_client
vpn_client group of tunnel ipsec-attributes
pre-shared-key *.
96.125.164.139 SMTP server
context of prompt hostname
Cryptochecksum:48fdc775b2330699db8fc41493a2767c
: end
Firewall #.Ivan Windon
Sent by Cisco Support technique iPad App
Hello
I had first change in the pool of VPN Client to something other than the LAN
As 192.168.1.0/24
NAT0
- Adding NAT0 rule for the new pool and then removing the 'old'
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0
no access list inside_nat0_outbound extended permits all ip 192.168.0.192 255.255.255.192
No inside_nat0_outbound extended access list only to allowed ip 192.168.0.0 255.255.255.0 192.168.0.96 255.255.255.240
VPN Client pool
- Remove the old group "tunnel-group" configurations, then removing the pool, make a new pool, and finally configure the pool to group "tunnel".
tunnel-group vpn_client General-attributes
No address vpn_pool pool
no ip local pool vpn_pool 192.168.0.100 - 192.168.0.105 mask 255.255.255.0
IP local pool vpn_pool 192.168.1.100 - 192.168.1.105 mask 255.255.255.0
tunnel-group vpn_client General-attributes
address vpn_pool pool
Theres another thread with a similar problem (even if the settings appear to be correct) on the forums.
If you can't get the RDP connection works I would also maybe Google for UltraVNC and its installation on the host LAN and your VPN Client and trying to connect with him to determine that the Client VPN configurations are all ok. There were problems that were ultimately associated with the LAN host rather than the VPN Client configurations.
If you think that his need. Save your settings before making any changes.
-Jouni
-
Double Master page has not not as expected
After the two video review and a tutorial written on Muse - specifically the creation and function of the duplicate Master Page - I can't understand what I'm doing wrong.
Most of my site is built on a single master, but I want a single page to appear a little differently. I clicked on the page master and choose "duplicate" and began the process of tweaking the duplicate. After finishing, I applied the collective duplicate to one of the pages of the site that I had seen and read in the tutorials. Unfortunately, I discovered that my changes in double was emulated in the original even if double "masterless" listed. This is contrary to what I've just seen and read.
What Miss me?
Thank you.
I was not able to reproduce the behavior using Muse CC 2014.2
This is the behavior I see:
- When I right-click and duplicate a master (say A-master), a new teacher named A-master copy is created.
- I then edit the newly created master (A-master copy)
- Apply A-master page to copy a page of the site and all the formatting of the A-master copy is applied to the page of the site.
- The page of the master, to indicate what master page displays [A-master copy] as badge site is applied.
The only thing I can think is that maybe more properties have been applied to the web page itself which override the options of the master page that you applied?
Try the following:
- Right-click on the problem page and see if there is the option to reset the Page Properties . What happens if you select this option?
- Otherwise, there are objects that have been added to the problem page? In Design view (View menu), view the layers panel, expand all the layers (select the triangle to the left of the layer name) and see if there are objects that might interfere with the display of the master page objects.
If the foregoing is of no help, would you be able to provide some screenshots of the behavior you're seeing? That could help us to acknowledge what is happening.
CARI
-
Selection of DDL penetrates same selection more CFDS
Hello
I have a table with 6 columns and 5 rows. Each cell is a DDL. If the user selects rawValue is 3 in a cell in a row, the remaining cells in the need for the line must be set to rawValue 3 automatically.
Help with the script for this would be appreciated.
Thank you
MDawn
Hello
If you place code in the calculate event Designer will assume the user will not enter what anyone in this area (if there is a user can override the option).
I was meaning that this code to go in the case where the purpose of the line that contains the fields in the default drop-down list called Row1 calculate.
Concerning
Bruce
-
Rejecting on receipt of the quantity and the quantity of items in.
Dear all,
In our purchase oracle users are able to receive more than they ordered in bulk of articles. We want to restrict giving a tolerance of 1%, so we have modified the control option in the options of receiving party. We gave a percentage of 1% tolerance and action reject that. But even after editing and saving system is just to give a message regarding more tolerance of the reception and allows users to receive more than the given tolerance percentage.
How can restrict us, can someone just guide me exactly how I can set up to stop the system to accept more than a level of tolerance.
Thanks in advance
eachEach,
Control of excessive reception can be set at the following levels. These levels override each other as shown below.Delivery options > suppliers > Articles > purchase orders.
(provider configuration overrides delivery options, POs substitute items, etc).
If you change the receipt option today, old POs will always advance Setup, and that's why you're able to receive too. You need to change the configuration of the old POs.
Hope this helps,
Sandeep Gandhi -
Your basket failed to bad navigation
Client has the following problem that must be corrected as soon as possible. Please help! @
When we have an eligible item for free shipping and an element that must pay $8, the basket by default for free. We need it by default in delivery of flat $ 8.
the Web site is www.stringstalker.com
Hello
I looked on the site and it seems that the customer has removed the free option. What I think happened is that since 'free delivery' has been used if the order qualifies for free shipping system will default and override other options.
To avoid this create a delivery option 'user defined' which is free instead. This will show the two available shipping options at checkout.
However if just want to organize an expedition the flat rate then how he put in place at this time is correct.
I hope this helps!
-Sidney
-
You have a PDF to hold on the viewer screen automatically when exporting to InDesign CS4?
You have a PDF to hold on the viewer screen automatically when exporting to InDesign CS4?
If you were to upgrade to InDesign CS5 or CS5.5 and if you exported as Adobe PDF (interactive), you can set the parameters for the layout display and Zoom.
So that, as Jongware, its possible for individual users override this option (preferences > Page Display > default layout and Zoom) the number that will actually do that is actually very small.
-
One of my friends sometimes runs into a web page which causes him problems. To be sure, it must note the URL and submit a bug report, if a page causes a browser crash, but in any case, although by default, he likes the browser to restore windows and tabs from the previous session, in the case of a heinous webpage, you * don't * want that to happen. I hope that I can set up an icon so he can click on that starts the browser on its homepage instead of restore the tabs and windows when it gets into trouble.
The value of the integer pref browser.sessionstore.max_resumed_crashes to 0 on the subject: config page in order to get the about: sessionrestore page immediately with the first reboot after a failure has occurred or the Task Manager was used for the closing of Firefox.
Which allows to deselect the tabs that you do not want to reopen, but will reopen the other tabs.
See:
-
Why didn't he opens with a blank page (as I put it in Options) more?
I had my options value 'show a blank page' when Firefox starts. It has always worked fine until recently... now it still reopens with some pages/tabs I had open at the time I last closed. I checked and the option is still set correctly. There was a similar report from someone who had changed in Windows 10, but I'm still in Windows 7. The other person was not a solution. I'm FF 41.0.1.
One of the strangely common reasons are that you have an optional settings file named user.js in your profile (personal settings folder) folder. Firefox uses the settings in this file at startup to override your preferences since the previous session. Unless you have created this file, you can remove it. The following support article has a section on how to check for her (jump on the suggestion of refreshment): How to fix preferences that will not save.
Note: by default, Windows hides the .js extension. So that you can find any file user.js and distinguish it from other files, you can disable this feature. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions
A little luck?
-
Difference between 'Reload' and "Reload (Override Cache)"?
Https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-quickly#w_navigation, what is the difference between 'Reload' and "Reload (Override Cache)"? What makes "ignore cache"?
Reloading Web pages and cache bypass aims to obtain a new copy of perhaps obsolete or damaged files currently stored in the disk cache.
You can do it like the first attempt if a normal charging does not seem to provide a version of a Web site or if you are having problems with a Web site otherwise.We usually have advice that if you have questions:
Reload Web pages and ignore the cache to refresh potentially stale or corrupt.
- Hold down the SHIFT key and click the Reload button
- Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
- Press 'Command + shift + R' (Mac)
Clear the cache and delete cookies only from Web sites that cause problems.
"Clear the Cache":- Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".
Start Firefox in Safe Mode to check if an extension or theme (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problems.
-
In the preferences of what "Override automatic cache management" wants to say and do?
I was wondering what "Overrides automatic cache management" means and does.
Firefox handles its cache size normally and can cache more or less information according to different factors.
This option specifies the maximum size of the cache of Firefox, in MB.
It is usually not necessary to enable this option.
-
Whenever I try to load a new tab in the same window, Firefox opens a new window. I went through the process of de-selection 'open tabs in a new window', but it does not work. I've also uninstalled and reinstalled, but no difference.
There are two common reasons for this problem:
(1) site uses a script that launches the window, and there parameters such as height and width, or restrictions such as no scroll bar. In these cases, Firefox assumes it's a dialog box associated with the page and always use a new window. (Is there a substitution for that I will mention later.)
(2) if the page you are looking at is in a dialog, Firefox is perhaps not ready to open a new tab in this window. Usually in this case the tab bar is missing or does not have the button «+» But if you open a new window using Ctrl + n and then links should work normally.
To force same scripted popups in a tab, you can change a setting under the covers.
(1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(2) in the search above the list box, type or paste link.o and make a pause so that the list is filtered
(3) in this case, see zero adjustment (B). The others are here for future reference:
(A) browser.link.open_newwindow
3 = divert new window into a new tab (by default) (checked *)
2 = allow the link to open a new window (uncontrolled *)
1 = new power window in the same tab* First check box in the Options > tabs
(B) browser.link.open_newwindow.restriction -for links in Firefox tabs
0 = apply the setting under (A) to all new windows (same script)
2 = apply the setting under (A) for normal windows, but NOT for windows script with characteristics (default)
1 = override the setting under (A) and always use new windows(C) browser.link.open_newwindow.override.external -for links in other programs
-1 = apply the setting under (A) external links (default)
3 = open external links in a new tab in the last active window
2 = open external links in a new window
1 = open external links in the last active tab replaces the current page -
I want to change the color of the visited sites, but am forced to put background and foreground colors that don't properly
display all colors for controls etc. on many sites.
I uncheck the button Allow pages to choose their own colors...
Google is a good example, after doing a search, then went to change the color of sites, uncheck the allow pages button and then you don't see the research and most of the options button in the upper right corner in google.I'm a little colorblind, can not differentiate the blue and purple for links on sites visited...
THX
I think the problem is that many sites use background colors to create buttons, so you lose when you override the colors of the page.
Perhaps you could use an add-on to refine the colors instead of the parameter of type all or nothing Firefox. I found a few extensions that say they can change the colors of the page, but I've not tried it myself:
For a truly personalized approach of colors, links, there are two ways of general use to apply your own style rules to specific sites: the stylish extension and a file userContent.css. You must define a background color preferred text and for links visited and unvisited so that you're sure to be able to read the text.
I hope that one of them fits the Bill!
-
When I updated Firefox to version 32, he started to always show my tabs in the last session when it is started. I tried to change the "Startup of Firefox" option to all three of the available choices. None of them changed the behavior. It nevertheless opens the tabs that were open last. I waited for the next version (33.0.3), but the behavior is always the same. I would like Firefox to open my home page selected.
I'm running Windows 7 Pro.One possibility is that Firefox hangs during shutdown, and so Firefox is recovering from an accident each time. But if you can see it stop normally in your tests, which probably isn't.
Software sometimes external will create or update an optional parameters file named user.js. For some reason, one of the things that often turns in there is a preference to restore your previous session at once. However, because Firefox uses user.js to override your normal parameters, whenever it starts, which then turns into a permanent change. To check this and remove any file user.js, you find, try this technical support article: How to fix preferences that will not save.
A little luck?
Maybe you are looking for
-
Attach file to send and install subject to filename
I've been using this Apple Script to attached to the pre-defined e-mail sent. However, the current script sets the name of the file to include the path of full access to the file, the file name + extension. Is anyway to edit the script to include onl
-
How can I change the name of several places in a graph/chart. (programmaticly)
Heey everybody, title says it all. I already tried to use active plot with a forloop, but for some reason any who does not work for me: s Order the image contained in the annex, which explains my problem. In the diagram, you will see a stringarray: 0
-
How to secure my WRT100/Linksys router
How to secure my router WRT 100 again...
-
HP Pavilion 14-v016tx: upgrade: laptop HP Pavilion 14
is this model supports an upgrade? (e.g., processor, graphics card & etc.)
-
Without warning, my phone closes all applications and a message "Configuring updates step 2 of 3 do not turn off your computer" the computer then stops and restarts automatically. A second message appears "Configuring updates step 3 of 3'. How can I