Overview of the bar of tasks Aero or aero peek doesn't work do not

Similar Questions

• Aero peek doesn't work do not

  Aero peek doesn't work! When I put my mouse on the taskbar at the bottom of my computer, it shows just the words and not the smaller window icon. When I go to the properties of the taskbar, it is gray and I can't enable or disable it. I read some of the other issues people here and I didn't know that Office 2007 can be part of the problem. I have Office 2010 could this be the problem? This air look was one of the features that Windows boasted of and now it does not work? I'm not happy about it and nobody seems to have a solution for it! Why not??? I want answers please.

  You must have the Aero Glass theme enabled to use Aero Peek. Right-click on your desktop, click Customize > select Windows Aero under Aero themes.

  Please see the following thread for additional solutions:

  http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/39108d91-B455-472c-B144-3e9138e196a7

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Aero Peek doesn't work now does not

  Here's all the sordid details.  Mobile workstation HP 8760w with Nvidia Quadro 3000 M GPU, 8 GB of RAM, Windows 7 64-bit, 128 GB SSD,... etc. 18 months of use, has been remarkable.  Last week, Aero Peek suddenly stopped working. I tried all sorts of things, including the following, without result;

  (1) restoration of the system of at least three different times, earlier (no updates were applied before failing Aero).

  (2) deleted the cache of WIndows Experience Index and re-reun coast at least a dozen times (it must be deleted or it crashes) (result of-7, 1-7.5)

  (3) personalization troubleshooting Aero reports without errors or questions.

  (4) Microsoft FIxIt Aero Troubleshooter says my video can't run Aero (though again, it has 18 months).

  (5) deleted, updated, modified, deleted, updated, changed... For the Quadro 3000 M NVIDIA drivers (even to aid version of HP on their Web site).

  (6) update of the BIOS and other firmware/drivers from HP on this laptop.

  7) opened a case with Nvidia (still in the wait - they ask me if I have uninstalled and reinstalled it, even though I told them that I have 10 times).

  (8) tried to run without Nvidia software installed at all.

  (9) checked for EnableAeroPeek registry entry by many other suggestions and articles. Even some added and then removed the other.

  (10) created a new Admin profile locally on the laptop.

  (11) run a SFCScan and it came back fine.

  Aero options do not appear in the Visual effects and the opton use Aero Peek in the properties of the Start Menu is grayed out.  It sent me down a lot, a lot of articles.  No resolution.  Everyone has been through this pain?

  I'll put my SSD in another laptop as she (we bought 4 of them at the same time) to see if it's related material... but nothing else that seems the Aero affected, so I'm skeptical, it's going to do anything.  I'm just * hope * Miss me something.

  If you have updated your Windows then uninstall the update of platform for Windows 7 (KB2670838) and your problem should be solved.

  Before I updated my Windows this month I just checked if Microsoft still offer this update. This is in the optional list. I installed so I thought to manually upgrade to IE10 because he wasn't in the IE9 update list. So I did manually and after that check updates again and to my surprise this update has disappeared completely. I have an old PC as well, and after installing all the updates I still have no problems so far. I recommend that you upgrade to IE10 after uninstalling this update (if you updated with that and faced the problem) to get rid of the update forever. But do it at your own risk, because I never updated my machine with this defective update and see if that caused any problems with my machine.

• Windows 7 - Aero Peek doesn't work

  Hello!

  Well, it looks like Aero peek working at all. It is activated in the task bar, and in the task 'Visual effects', everything is selected. I am also unable to flip flop.

  I use Windows vista edition Home premium that I just bought.
  Any advice?

  Hello Nico884,

  With all the steps that have been taken to solve the problem, it is rather likely, not a setting, but a corrupt user profile. You will not lose any software that you have installed by using a new user profile. You can easily transfer your data to the new profile so, take a look at the difficulty of a user profile is corrupted.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Aero Peek doesn't work don't always

  I have installed and reinstalled windows 7.  I also installed a better video card and am still having the same problem.  The peek aero on the taskbar works find but after that my computer sits for a while without being used the pop-up window no longer works and all I get is a text box.  They don't come until I restart the computer. Any suggestions?

  still no luck. It has already been set to 1.  I'm going nuts.  It's fustrating as the _____. The only thing that seems now restore it is a restart.

  I think that I could restore my system to the condition of the plant and try an upgrade installation.  I really prefer a clean install, but I'm at the point where I think I'll try something else.

• Wireless switch on, but the green light is turned OFF so WiFi doesn't work do not

  Hello

  Sony VAIO VGN-FE780G with Windows 8.

  Wireless switch starts giving the problem for the past 1-2 years. The green light is used for down working on laptop, usually as he used to come down as soon as you move the laptop little. I used to move the cursor to the market and push it a little to make it ON. This is usually used to make green and wifi, used to work.

  Last week the green light went off and then even after trying to do ON dragging to MARKET or pushing, sound not to become green.

  My guess is that the switch had bad connection and now it has finally broken from the inside.

  What is the solution? I can open the laptop and fix it?

  Kind regards

  Sachin

  raklow364:

  Although the VGNFE780G initially provided with Windows XP and is not supported for Windows 8, I would say that if you had Windows 8 working on the PC to WiFi before, this seems to indicate a problem of material with the switch.

  Have you tried opening the charm of settings in Windows 8, and clicking on the PC to change settings link, then wireless to see if the WiFi radio has been disabled in the settings?

• How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

  How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

  Use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Go to method 3.

  3. for the network icon.

  (B) to activate the icon network - Enable_Network.reg< click="" to="">

  * Don't forget to restart to complete the procedure. ***

• How to change the icons size in the bar of tasks other than small or big

  How to change the size icons in the bar of tasks other than small or big. I'd like an average size.

  There is no intermediate option to choose. You can choose small or large icons on the taskbar. -Ramesh Kumar http://www.WindowsValley.com

• I lost the bar background tasks, start menu and help on my windows 7__

  I lost the bar background tasks, start menu and help on my windows 7

  Hello
   
  1. are you able to use the icons on the desktop with success?
  
  In addition to the suggestion of BurrWalnut you can see the methods below.
  
  Method 1.
  You may have set the taskbar to auto hide, check the settings below:
  a. Click Start and select Control Panel.
  now, (b) go to the menu bar of tasks and put in service and click on it.
  C. on the taskbar tab, check if there is a check mark next to auto-hide the taskbar.
  d. If there is remove it, then click on apply and then OK.
  
  Method 2.
  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts and check if the problem still persists.
  For more information, see the articles below.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I view on the opening screen on Adobe Acrobat (Windows) version 9, the bar of tasks that has 'File', 'Edit', etc. - He disappeared

  How can I view on the opening screen on Adobe Acrobat (Windows) version 9, the bar of tasks that has 'File', 'Edit', etc. - He disappeared. Slobberdog

  Hi slobberdog,

  Please check this post about the same issue in Acrobat 8. The solution applies equally to Acrobat 9: How to restore the menu bar (file-Edit-View) PDF?

  Best,

  Sara

• Aero Peek no longer works...

  This morning my camera was dead.
  After changing, aero peek no longer works on my computer...

  I tried all these things:
  -an aero theme is selected
  -Theme service is running
  -the registry key is enabled HKEY_CURRENT_USER EnableAeroPeek
  -my graphics card is compatible with Aero and up to date.

  Aero Peek button is still gray.

  Please help me

  Hello

  Method 1
  I suggest you run the fixit from the following link and see if that helps.

  Visual effects Aero Glass in Windows are not working or displayed
  http://support.Microsoft.com/mats/aero_effects_not_working/en-us

  Method 2
  I suggest you try the steps from the following link:

  Guided Help: the problems of Aero in Windows 7
  http://support.Microsoft.com/kb/976170

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Canon scan to folder (Server 2008 R2) from the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  We have a few Multi functional Cannon, who were able to scan to folder to our file server 2008 R2 server.

  Since the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  Nothing has changed for folders or shares. Actions are like:

  \\fs01\scans\IT

  Shared folder is \\fs01\scans

  Share permissions are full for everyone

  On the COMPUTER folder, only the service and the Canon scanner user have full conrol...

  When I turn off the firewall of Windows on the FS01, it works.

  Can I get a SMB = OK on the Multi functional.

  When I turn on the WIndows firewall, I get a SMB = NG on the multifuntional

  I checked the rules and everthing about file and printer sharing is allowed...

  Can someone please think about what to do?
  Because really don't want to go with Windows Firewall disabled.

  The Endpoint Protection 2010 Anti Virus is installed on the FS01, but given that disabling the Windows Firewall works, I don't think that the Anti Virus has nothing to do with it.

  Update: I tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! So there's something wrong with this one server... But as far as I can see, the firewall has all the file and open sharing of printers of things... And when I connect with the Canon Scan on a PC user I can browse places very well.

  Hello

  "Update: I just tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! "So there is something wrong with this one server.

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• How to pin Sticky Notes 8 or reminder HD App at the bar of tasks or desktop screen?

  I want to see my post-it Notes 8 or reminder HD App on the screen, but it is show on the start screen, and no options are available for either drag my notes and see the desktop or to pin it in the taskbar.

  Please help me. :)

  The options of PIN to the taskbar for programs focused on the desktop (such as the application of integrated reminder that comes with Windows 7 and 8).  You might want to try that instead of these other applications.  To find the integrated soft reminder, just go to your start screen and type the word "sticky" and it will appear.

  But, having said that, a recent update is achieved which allows also 3rd party store apps also get pinned to the taskbar.   For this update, press on +X and choose Control Panel, then go to system/security and Windows Update to get the update.

• I continue to be offered an update of Firefox, but when I click on 'install' the bar just comes with half white, half blue round and does not install.

  I have a Macbook (bought in June 2011). Several times in recent weeks, I have been offered an update of Firefox and urged to install it.
  However when I click on OK the bar at the top of the window just goes round with the blue kind half white half of the roll and just install, no matter how long wait. That is, it never becomes the solid blue line, which should gradually fill to the top of the bar.
  Thank you
  Jane

  Try the alternative and easier way by downloading here

  • getfirefox.com