OWA (Exchange 2013) with ADFS

Similar Questions

• ASA VPN client and OWA Exchange/2013

  Hi all... quick question ASA...

  Does anyone know the status of support for OWA Exchange 2013 and the ASA webvpn client access?

  I know that the ASA has a model for 2010... It works with 2013? Is there is the 2013 model in the pipeline for the ASA?

  Thank you!

  Hi Paul,.

  There is an improvement (CSCul27869) that opens to Exchange 2013 be supported with ASA.

  CSCul27869
  It is an enhancement request to add support for OWA 2013 with webvpn.
  https://Tools.Cisco.com/bugsearch/bug/CSCul27869/?reffering_site=dumpcr

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Bug with Exchange 2013 CU6

  Hello

  I installed Exchange 2013 SP1 and some users take pop account set up in their outlook 2010 client, pop accounts are configured to put new messages in their Inbox to exchange letters. Given that mail upgrade Exchange received pop account cannot be answered or forwarded as it makes its appearance as unsent mail, it's exactly the same problem encountered by several users with office 365:

  http://answers.Microsoft.com/en-us/Office/Forum/office_2013_release-Outlook/Office-365-Outlook-2013-POP3-emails-received/9432c4a9-9df3-43C1-9D1D-bb9f0dac1126

  Today I upgraded to CU6, and the problem is still there...

  Can someone help me?

  You would be best served posting in the TechNet forums rather than the forums of consumer-level (these).

  Or contact Microsoft directly with the issue.

• Compatibility of Exchange Server 2013 with OIM 11g R2 BP 14

  Hello

  My system is configured as shown below the configuration and integrated into Exchange Server.

  Wanted to know would be compatible with Exchange server 2013.

  Would appreciate if you could share any link or documents that list this matrix.

  IOM - 11.1.2.0.0 with BP-14 version
  

  Database Version - Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  WebLogic Version - 10.3.6.0

  Version of connector AD- 11.1.1.5.0

  AD installed on Windows Server 2008
  

  Version of Exchange Connector - 11.1.1.5.0

  Type of current - Exchange Server OnPremise2010

  Thanks in advance

  Puneet

  You must upgrade your Exchange server connector .

  Please see below note;

  Target systems

  The target system can be one or a combination of the following:

  • Microsoft Exchange 2007 SP1, SP2, SP3 (64-bit)
  • Microsoft Exchange 2010 RTM, SP1, SP2, SP3 (64-bit)
  • Microsoft Exchange 2013 RTM (64-bit)

  For support of Exchange 2013, Patch 17239236 must be applied to the version 11.1.1.6.0 of the Exchange Connector. This Patch can come from My Oracle Support under patches and updates.

  Download location for connector:

  Microsoft Exchange

  11.1.1.6.0

  http://download.Oracle.com/OTN/NT/IAS/connectors/111/Exchange-11.1.1.6.0.zip Change - 11.1.1.6.0.zip

  ~ J

  Note:

  ------

  Please check the response as useful or correct when it is appropriate to make it easier for others to find

• Installation of POS 6 Exchange 2013 plugin - current user is not a domain administrator

  I installed Exchange SP1 2013 (current patch level).  I'm tying to install the plug-in by vmware-data-protection-administration-guide-60.pdf, Exchange age 169.  VMware VDP Exchange Backup tool for configuring the user start and tells me "the current user is not a domain administrator" (see screenshot).  I am connected to the machine using credentials a domain administrator, not the local computer.  The Exchange sever, Storage group, Mailbox store drop-down lists are empty, apparently a problem of authority.

  The talks on creating a VDPBackupUser account manually KB creating a VMware vSphere backup user account Data Protection (WTP) Exchange plugin with Advanced VDP (2073168).  Before I trot in this way, I thought I'd see if there is anything obvious or that I ran out of base.

  Problem solved.  Setup VMware VDP backup user tool must be "Run as administrator...". "I must have missed that in the doc

  In addition, notes in the log (the configuration tool dialog box) that the created account VMwareVDPBackUser (mailbox) must be connected to (at least once) to complete the configuration.  I use OWA to open a session.

  The VMware install document talks about the user VDPBackupUser.  The user created by this process is VMwareVDPBackupUser.

• Distribution group Exchange 2013 allow limited external sender does not... Help, please

  Hi all

  We have a problems with restriction of Distribution Microsoft Exchange 2013 group. We had put the delivery management for external sender specific permit under the distribution group, however email outsider (not to allowed list) can still send to the distribution group.

  Please advise

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Office/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon

• Exchange 2013 RTM upgrade to cu9

  We are almost new with Exchange 2013 and we are running on the RTM version. I understand the list of updates is available already for 2013 Exchange in a form of CU (cumulative updates). If I'm not mistaken it is already in its 9th CU. My question is, is it possible to update our Exchange 2013 GTR cu9 directly without going through the previous CUs? If so, we would be grateful if you could provide us with a quick guide for the upgrade. Thank you very much!

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  Or MSDN Forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Error Code 80072f8f: windows update fails. Outlook2010 auto config account Exchange 2013 fails 'no available encrypted connection '.

  The user's mobile final has all of a sudden a problem. Windows 7 Pro.

  Disconnects account Exchange 2013 in Outlook2010 cannot connect......

  .. Windows Update fails with error Code 80072f8f... A cert security problem?

  ----

  The user did issue out-of-the-blue (update) about self-configuring. I don't know how he responded.

  So we see that Outlook cannot connect to the Exchange Server... error codes include:

  "There is a problem with the proxy server's security certificate"

  "Outlook cannot connect to the server proxy [rackspace] mex06.emailsrvr.com".

  (Error code 080000000) »

  .. Thus, there seems to be a problem with the security on this computer certificates.

  I have no idea where to start to fix this...

  Rackspace, bravely suggested that I remove the mail profile and create a new...

  The create new e-mail account (exchange 2013) breaks down... same error...

  All hosted no more thoughts.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting an error code.

  I suggest you to refer to the Microsoft Help Article below and check if that helps.

  As you've found Windows Update fails with error Code 80072f8f.
  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80072F8F#1TC=Windows-7

  You can also check out the article below.

  https://social.technet.microsoft.com/Forums/office/en-US/0b7ebeab-ca31-4379-a489-16fdad34d550/intermittent-proxy-error-there-is-a-problem-with-the-proxy-servers-security-certificate-outlook?forum=exchangesvrclients

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Advanced POS 5.8.1 Exchange 2013 RegisterAgent error

  Hello

  In our test environment, I installed agent of POS on Exchange 2013 vm without any problems. Then, because he had some problems on the virtual computer exchange, I decided to install another Exchange with /reprise switch and removed the old one. This new exchange server works well with the same characteristics (name, ip etc.) with the former, but now I can not install Agent of POS.

  I already tried ip and domain name during installation if this should not be a problem. It seems that POS retain the former agent of information somewhere, even if it is not installed on the new server...

  Any help appreciated.

  Thank you

  You could try deleting the customer record exist for Exchange in the POS device and then reinstall the agent on the Exchange Server.

  Here are the steps I used:

  Connect to the VDP Advanced device as root

  View customers by entering customer mccli see the--recursive = true

  Delete the registered customer by entering mccli, deletion of the client - area = / clients/VDPApps--name=vmname.companyname.com

• Support of Exchange 2013

  Hello

  I just installed the 5.8.1 Hyperic agent on a server of the mailbox Exchange 2013, but the agent has not captured it is an Exchange Server... Am I missing something?

  TIA

  Hello

  Currently now Hyperic 5.8.1 supports Exchange 2013, our pipeline.

  We will update our site changes its solution with the plugin up to date when it will be released.

  https://solutionexchange.VMware.com/store/products/Microsoft-Exchange-Server-Hyperic

  Thank you

  Yaron

• Download Document of Intranet Portal with adf 11g connection credentials

  Hello
  
  
  JDev Version: 11.1.2.2.0
  
  I am trying to download a document of intranet portal that uses my IDs of NT.
  
  When I try to download the link from the browser, it works, but try even when download of java code with ADF Backing Bean his fault download saying 401: unauthorized Exception.
  
  Question here is how to move the Windows NT credentials to my grain of document download or is there a way to say "use my login credentials of the system"?
  
  
  I copy the source code here for your reference.
  
  /**
  * Download the file stored in the database in the URL format
  @param facesContext
  @param outputStream
  */
  ' Public Sub downloadDocument (FacesContext facesContext, OutputStream, outputStream)
  {
  OperationBinding op = (OperationBinding) findOperation ("getDocumentLocation");
  Map opParamsMap = op.getParamsMap ();
  opParamsMap.put ("docRowKey", docValueID.getValue ());
  String result = (String) op.execute ();.
  System.out.println ("location of the document" + result);
  FileOperations.getInstance (f:System.NET.WebRequestMethods.FTP.DownloadFile (result));
  }
  
  
  synchronized Public Shared Sub downloadFile (String strURL)
  {
  DocumentURL URL;
  UConn URLConnection = null;
  
  try {}
  documentURL = new URL (strURL);
  uConn = documentURL.openConnection ();
  
  
  Authenticator.setDefault (new Authenticator() {}
  protected PasswordAuthentication getPasswordAuthentication() {}
  return new PasswordAuthentication ("xxxx", "xxxxx".toCharArray ());
  // }
  // });
  
  int byteRead;
  int byteWritten = - 1;
  
  InputStream is = uConn.getInputStream ();
  OutputStream outStream = null;
  Byte [] buf = new byte [153600];
  While ((byteRead = is.read (buf))! = - 1) {}
  outStream.write (buf, 0, byteRead);
  byteWritten += byteRead;
  }
  System.out.println ("uploaded successfully.");
  }
  catch (FileNotFoundException fnfe)
  {
  System.out.println ("Exception occurred while downloading file:" + fnfe.getMessage ());
  }
  catch (MalformedURLException e)
  {
  e.printStackTrace ();
  }
  catch (IOException e)
  {
  e.printStackTrace ();
  }
  Finally
  {
  
  }
  }
  
  
  Please note that I am the download document based on a URL (intranet portal).
  
  Happy to provide any other information.
  
  Appreciate the quick response
  
  Thank you inadvance

  Network and application user id user ID but can match... the password is not... Since you say that the URL itself works very well when you give him on browser, try opening the URL using goLink.
  Guess it would work if the user of the network has access to the portal.

  Check out the link below to open the URL using goLink.

  Open a dynamic URL to link to the Table column

  Good luck!

  Edited by: 119413 January 10, 2013 14:35

• Hi, I have the iphone 6 in warranty period... .working perfectly, but I want to exchange it with the iphone 6 s. Please suggest.

  Hello

  I have the iphone 6 in warranty period... .working perfectly, but I want to exchange it with the iphone 6 s. Please suggest.

  If your phone is in warranty period or not has nothing to do with trying to swap an iPhone for a s 6 6.

  Apple not no trade ins, so you have to sell your iPhone 6 to finance the purchase of a new s 6, or you can use the Apple recycling.

  The only other thing you can do, it's that if you bought your phone directly from a carrier rather than Apple, you can exchange your phone with a carrier in order to upgrade to a 6 s.

  That's all.  Other than that and if you bought at Apple, you must sell your iPhone 6 and use that money to buy a 6s instead.

• Upgrading Exchange 2013 standard to enterprise

  Hi all

  One of my servers Exchange 2013 (OS 2012) is set to standard, and I like to upgrade to enterprise edition. Standard server is limited me 5 database that can be created when I upgrade the company will lose the database which are mounted? and what is the easiest way to get there?

  Kelly

  Hello

  Please post your question in TechNet forums to help Exchange 2013 to upgrade to the Enterprise edition.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home

• Problem of outlook MAPI and Exchange 2013 configuration - IMAP

  Hello

  We have installed and configured Exchange 2013 and configured system requirements

  We use the email id unique in several profiles, we can set up, but it will ask for the password again and again

  Exampale: 1) * address email is removed from the privacy * * 2) address email is removed from the privacy * * 3) address email is removed from the privacy * these 3 accounts I have to configure in 3 unique profile (MAPI or IMAP) machine but it is asking password often, so I would like to know that several account several profile is recommended or not? If recommended please if anyone knows resolution please send an email to * address email is removed from the privacy * or * address email is removed from the privacy *

  Kind regards

  Sahana Fernandes.

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Office/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon.

• Export Exchange 2007 Journal rules and import them into Exchange 2013

  Hello

  I need to export our Journal of exchange rules 2007 and then import them into exchange 2013, this 'http://technet.microsoft.com/en-gb/library/ee633488%28v=exchg.141%29.aspx' page said how it was possible, but I don't have the export-Jou... option in exchange 2007.

  Any help will be greatfull.

  Thank you

  William

  Post in the Forums of Exchange Server:
  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve