P10 554: problems with display power management
It is not possible to reactivate the display (mouse movements, pressing certain keys, pressing the key) when it is turned off by the power management system. The motherboard has already been replaced by a service representative Toshiba, I even reinstalled the system, but the problem persists. The behavior is not reproducible. Sometimes it works, sometimes it doesn't.
Anyone out there have the same problem? Is this a configuration problem or may be a hardware defect? It is already a known issue?
Any ideas appreciated.
Thanks in advance
Karl Jost
Hi Karl
It is not easy to say, but it is possible that there is some malfunction of the equipment. In my opinion the last try to check this is to reinstall the operating system. If the problem persists there are certainly a hardware problem.
Good bye
Tags: Toshiba
Similar Questions
-
Problems with the Power Manager 1.51 new T60 has
I've updated Power manager version 1.51 has and I have problems with the gauge of Power Manager in the task bar. Life remaining battery is not updated once more. Is there any chance I can find an earlier version of the software that worked perfectly before? Or there is a method to solve the problem?
Sincerely,
Nikita Septucha
-
Problem with Toshiba Power Saver Tecra S1
Hello
I have problem with Toshiba Power Saver (GST).
I installed SP2 on my WinXP Pro, and after this operation, all works well. After a few days GST on icon disappear from the task bar. When I open the Console from Toshiba, then GST I can see only incomlete standard dialog box. There is no configuration icons, but initially were, and I set all the settings. Now, there are 4 black boxes (2 small as a small icon) and 2 large as icon bigest at the bottom and a large black on the right.
I try to reinstal GST, but it had no effect.Can someone help me
Alex
Hello Alex
I have never seen anything like it. There is obviously some problems that doesn t allow the graphic illustration of the ATP. The first step is always reinstalling the software. I don't know what you need to do exactly. In my opinion, you should try to remove the GST and SP2. Install SP2 again and after this GST.
If there is not the worst success solutions are preinstall the device using the recovery CD.
-
I am facing a problem with the POWER of ODIN 9.1.0.5, my broker is Indiainfoline, my OS is Vista ultimate, when I login, everytime I get an error 'System Error (10055) (setsockopt)'.
Check out these links:
System (10055) error (setsockopt) Solution
http://www.win7heads.com/software/82898-system-error-10055-setsockopt-solution.htmlODIN request does not work Windows 7
http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/ddbe30c8-f4c6-4B8F-ac91-85aa07191ea3 -
My computer recently crashed. A fixed it but! When I then tried to use photoshop I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?
Update or restore your graphics driver.
-
I have problems with the Desktop Manager
I have problems with the Office Manager, when I press the window comes just in white. I can not yet day LR & PS to the latest versions. My macbook pro is ok, but my iMac where I do most of my editing, I can't seem to update it. Please say something, I realize other people have this problem and no response from adobe on the issue.
Please see the links below.
- Re: Empty opening creative cloud app
- Cloud Desktop App is empty?
- New application Cloud Creative unusable: it is empty!
Hope this will help you.
Kind regards
Hervé Khare
-
Cs6 bought for more than a year, and recently had problems with the application manager, then I was instructed to re - install the product now I get errors after downloading to install it, so now I don't have cs6 on my computer, I can't go to adobe as I keep getting palmed to do that and the next thing , why can't I talk to someone why my program is not installed.
It's ok now, I used the creative cloud cleanser and then tried to install again and bingo! everything fine now, thanks anyway
-
Can Hi anyone help me understand what could be the problem with my extensions Manager. I just installed or rather updated all my apps, including extensions through the CC Manager Manager. After updated all my applications, I think I lost all my extensions on Photoshop CC 2015. So I tried to reinstall the extensions Manager and update it, but the problem seems to be it seems to take on Photoshop, which makes it difficult for me to install new extensions. Is there something escapes me?
Hi Didier,.
See a related discussion on the same topic: Re: Extensions CC2015 gone
I heard the team there are some problems with the Add-ons and the command line tool, and the team is trying to solve. I'll let you know as soon as I have an update.
See Adobe Exchange for official communication on the extensions Manager.
Thank you
Preran
-
(Redirected) problem with the power supply on Alienware X 51
I have a problem with the power supply. I can't run all the games with good graphics, if I try to run any game, my PC turns off and a small lamp on the power supply shuts down. It began a week ago, and before it was normal.
Better in this position in the Alienware owners Club Forum, here:
http://en.community.Dell.com/Owners-Club/Alienware/default.aspx
Bev.
-
Anyone had this problem with adobe extension manager cc? Video included
Attached is a link to a video that will show you my problem with the extensions Manager
http://www.YouTube.com/watch?v=eo6FdbxkMb0
System information:
Windows 8
8 GB ram
NVIDIA Geforce GTX 560 Ti
AMD Phenom 9500 Qudcore
Adobe Creative Cloud Software
Thank you
elfish43
Please download the last Panel of exchange of http://www.adobeexchange.com/, launch the CC extensions Manager, click on "Tools"-> "Préférences" menu... ', uncheck the option 'Allow the extensions Manager to access the Internet', and then install Exchange Panel.
-
Satellite P10 554 problem intel wireless 2200BG
Hello
I ve got a P10-554 and tried to install a mini-PCI Intel 2200BG card. the driver is correct installed but the work of won´t-hardware switch. I have could´t turn on the wireless card.
in another P10 554 a 2100 b card work very well.
Anyone know why?
Hello
It is possible that new generation cards cannot be activated by a wireless switch. I'm not sure that f happens only with Intel adapters. Please check in Device Manager if the card is recognized and installed correctly. If so try to establish a wireless connection.
I'm sure it should work correctly.
-
I keep changing power options, even the one who always says, but this isn't help even when I restart after setting up things. It will just automatically to stand-by after a few minutes, no matter what I do, most of the time and not always. so it happened me really confused as far as what I need to do.
Hello
You did changes to the computer before the show?
Method 1:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/322756/)How to back up and restore the registry in WindowsYou can check if for a network card power management is disabled.How to disable for a network card power management when you deploy Windows XP
http://support.Microsoft.com/kb/837058
Method 2:
Log on to the computer manufacturer website and update the latest drivers for chipset, BIOS (Basic Input\Output System). Also, look for other updates to the device driver.
Reference: How to manage devices in Windows XP
Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.
You can see the following article for more information:
How to solve the problems of hibernation and standby in Windows XP
http://support.Microsoft.com/kb/907477
Let us know if it helps!
-
a serious problem on the power manager
Hello, I'm X 230 user using windows 7 and have improved the ability of the ram to 8 GB.
It is not easy to believe, but I've struggled with this problem for a year.
The problem is, I cannot uninstall the software, Levono supply manager.
That the progress of uninstalling the program indicated by the installation process of Power Manager reached 94%, it's freezing outside here.
Now no matter how much I'm awaiting resolution, it remains still frozen.
Most ridiculous thing it is when I did close the shield installation process and reboot the laptop, Windows could not start
while I do the system restore to roll back.
How can I uninstall Lenovo Power Manager?
* the reason why should I uninstall it it's done a lot of crushed against the software I use
Thanks in advance
Fortunately, I found a solution.
During the uninstallation of the program progress was stuck, instead of restarting, I just ran the shield to uninstall manually at the command prompt. After a while, another unistall process has reached 100% and I managed to uninstall properly.
-
Problem with M30 power indicator
Hi I have a satellite m30 and when I plug my power adapter, battery indicators starting to keep flashing (all of 3 leds flashing) and it does not load. I tried to remove the battery and plug in the adapter again the LED indication has stopped working and there was no power connect to the laptop. the indicators flash only when the battery is placed. I wonder if theres nothing wrong with my adapter or my battery was completely dead? (my 'save energy' got screwed up recently with a 'fatal error' message so it might be wrong with the operating system I think).
any help would be appreciated.see you soon
DaveHello Dave
On this path, it is not easy to say what can be the problem, but I guess that there is some problem with electronic control gear. It is placed on the motherboard. I recommend you contact the authorized Service partner and let check the device.
You can explain exactly what is happening, and I'm sure they will be able to give you good advice.
I put t know not in what country you live, but on this page you can find SPAS in your country.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true
Good luck!
-
Hi, my windows is 8.1 pro with media center, and my laptop is lenovo G500. I get this error in the center.what action is the first error and what is the the second error? and how can I fix them?... tnx.
Have you tried to reinstall the Lenovo power management utility?
Maybe you are looking for
-
Firefox guard loading old tabs when you restart
Firefox guard loading old tab when closed and a new Firefox has been started. (My startup home page is set to "restore default". I even updated sessionstore 0 throughout; config) always the same question
-
right speaker updated iMac stopped working with 10.11.1
My iMac late 2009 had its right speaker suddenly stop working. The only change I've done recently is the update form capitan 10.11 to 10.11.1, is that someone has experienced this problem or give me any advice?
-
Cannot get SetEndOfFile (or whatever it is in kernel32.lib) to post a link
I'm looking for truncating a file using the SDK SetEndOfFile function. Basically, I try to recreate the code that RobertoBozzolo has posted in this thread. I use CVI 2015 and 8.1 SDK. I have consulted the SetEndOfFile of Microsoft documentation and I
-
lost a USB transmitter for wireless keyboard/mouse
I lost my usb Microsoft Wireless 3000 v2.0 keyboard transmitter and the mouse - any alternative is buying another set of unity?
-
Configuration for E4200 suggestions
I just bought a refurbed E4200 and run the configuration wizard. It works fine but I know there are always better configurations and settings. I'm out of the static IP for my devices, but don't know enough about this router beyond that. I have an XB